Query is not working cant see result always saying no item found
hi i have created this query to see all systems who have ms word installed on them but its always showing no result other builtin queries working fine but when i create new query its show nothing just no item found i would love if some one help me in this
matter thanks
select SMS_R_System.Name, SMS_R_System.LastLogonUserName, SMS_G_System_SoftwareFile.FileVersion from SMS_R_System inner join SMS_G_System_SoftwareFile on SMS_G_System_SoftwareFile.ResourceID = SMS_R_System.ResourceId where SMS_G_System_SoftwareFile.FileName
= "winword.exe" order by SMS_R_System.Name
How have you configured your Client Settings in the Administration node? The setting called 'Software Inventory' needs to be enabled. If you've just recently enabled it with the default settings, make sure that the client is sending in the data at a schedule
other than 7 days, unless you want to keep it at the default.
Also, you'd need to specify which file types that should be inventoried. If I'm not mistaken, by default there's no file types specified.
Enable this feature with caution, as it could if configured in a bad manner, end up sending a lot of data over the network.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja
Similar Messages
-
The scanner in my MX432 is not working...it always say not connected to PC...
The scanner does not work!...I was able to use it only once when I bought it...now I want to scan some photos but it kept saying not connected to PC...what should I do??
Hi smrdhdmom,
To resolve this, please follow these steps:
1. Click on the Canon IJ Network Scan icon in the upper right hand corner.
2. Click on Open Settings.
3. Click Register Scanner.
4. The Twain Data Source Name should read Canon MX432 Series Network. Click on the MAC address and then click Apply.
5. Make sure that the PIXMA MX432 has a checkmark next to it in this list.
6. Click OK. Once the MX432 is selected, please make sure that the MX432 is selected in MP Navigator as well.
To do this, please follow these steps:
1. Open your Applications folder, click on the Canon Utilities folder and then open the MP Navigator.
2. Click on the Preferences button.
3. The PIXMA MX432 that should be selected is the network attached, not the USB attached. The network PIXMA MX432 will be named PIXMA MX432 (xxx) with the mac address of the unit in parenthesis, just as it appeared in the Canon IJ Network Scan Utility.
4. Click OK. Scanning should now be possible over your network. -
Temporary Table In SAP Query - Does not Work?
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
CREATE TABLE ##tab
[Date] date,
[Delivery Rows] varchar(40),
[Delivery Total Units] varchar(40),
[Receipts Rows] varchar(40),
[Receipts Total Units] varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
FROM ODLN
INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
WHERE ODLN.[CreateDate] = @date
SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
FROM OPCH
INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
WHERE OPCH.[DocDate]=@date
SET @a=@a+1
INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM ##tab
{/code}
Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
Edited by: Chris Candido on Feb 2, 2011 8:38 PMChris,
There are several areas in your code which needed changes.
1. On the field name for your temp table you had spaces.
2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
[dbo].[ODLN]
3. You really need not have ## in front of your temp table, it could just be #
The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result. I would suggest you put the whole code into a Stored Procedure and call the SP from SAP. Corrected SQL below. If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF object_id('tempdb..#tab') IS NOT NULL
BEGIN
DROP TABLE #tab
END
CREATE TABLE #tab
[Date] date,
DeliveryRows varchar(40),
DeliveryTotalUnits varchar(40),
ReceiptsRows varchar(40),
ReceiptsTotalUnits varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
FROM [dbo].[ODLN]
INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
WHERE [dbo].[ODLN].CreateDate = @date
SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
FROM [dbo].[OPCH]
INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
WHERE [dbo].[OPCH].DocDate=@date
SET @a=@a+1
INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM #tab
Suda Sampath -
Query is not working correctly
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5user9522927 wrote:
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
"Here's a picture of my car sitting in the driveway. Why won't it start?" -
Select query is not working in BDC Program
Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond -
My select query in not working
hi
this my select query
select * from J_1IEXCHDR where werks = 'DT*'
this is not working
i want result where werks like DT01, DT09 and many statting with DT
so plz tel me how to write for like .
thankHi,
>
Guptaprashant wrote:
> hi
>
> this my select query
>
> select * from J_1IEXCHDR where werks = 'DT*'
>
>
> this is not working
>
> i want result where werks like DT01, DT09 and many statting with DT
> so plz tel me how to write for like .
>
> thank
Use:-
select * from J_1IEXCHDR where werks like 'DT%'.
Regards,
Tarun -
The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
Bex Query is not working in portal
Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENUHi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
Hi,
I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
Satishwould be best if you can download the guide here
http://support.apple.com/manuals/#iphone -
i downloan and updated my iphone software ...i have tried to activate it back but it is not working out error message always what can i do?
this is the error message........we are sorry we can not continue with your activation please contact customer care
another message will say actiavtion server not available;
please what should i do? -
The volume of my MacBook Pro is not working I see but I can't hear
The volume of my MacBook is not working I see on screen but I can't hear.
Mute button? F10
Have you used the headphone Jack? Look in there see a red light.
Try plugging and unplugging the jack to flip the switch -
Why select query is not working?
CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1 PLS-00103: Encountered the symbol ")" when expecting one of the
following:
, not pragma <an identifier>
<a double-quoted delimited-identifier> final instantiable
current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1 PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH -
Excel 2010 MS Query is not working
Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010. I am running into problem with the MS Query. Spreadsheets have MS Query linking to MS database. However, when I open some of the spreadsheets, the MS Query
is not working ie. the blue circle keeps turning and then not responding. It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria. I
tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database. Once I set up the criteria and click Return data, the Query gets stuck.
Please help! Any comments/suggestions will be appreciated.
ThanksHi,
There are many possible causes that can crash MSQuery in Excel 2010.
First, please make sure we have installed the latest Office 2010 and Windows patches.
Second, Please read the Blog, it explains one typical crash scenario.
=====
AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
There are several possible resolution you can try to resolve the above crash:
1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
2. Repair all the keys into registry at the following place:
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
For example:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
"TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
"TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
=====
Third, start the Excel 2010 with
safe mode, it helps us confirm if some add-ins cause this issue.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs. -
Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting the phone as a new phone but nothing works. When connected to the pc it shows on the iphone screen '1 connection' but the pc says 'no internet connection' I've spoken to three who say it must be a phone fault. Any help appreciated. :-)
If you have restored as new that pretty well covers software issues
Looks like a trip to an Apple Store and a likely Out of Warranty exchange unit £159 over the counter
May e consider an upgrade with the money ?
Maybe you are looking for
-
How can you get rid of the stripe on the homescreen created in ios 7?
I found this question some months ago, but no one had a method to resolve it. I wanted to remove the solid stripe across the bottom of my ipad 4 homescreen. I think it's been called an app park, a shelf, and an applications easy access. Whatever it
-
Like the title says... I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried
-
How to maintain GR/IR clearing account
Dear all, Can anyone tell me how the GR/IR clearing account maintained manually - i.e., prevent or stop system from auto posting. Is there any possibility - if yes can you tell me the steps and t.code where this has to be maintained. Regards, M.M
-
Row background color in dataTable control based on criteria
It is relatively straightforward to give a pattern of color to rows in a dataTable control, for instance to alternate colors from white to gray. However, I have not yet figured how the row background color could be decided based on data fields associ
-
Hello! I am new to Lightroom and have thousands of photos I would like to import. I have them stored on an external drive and just imported my first batch and saved them to another external drive. The problem is that after the first batch I lost abou