Query iView does not display DB2 tables

Hi All,
I'm trying to connect to a DB2 database and have created a System object for that. When I'm creating the Query iView, in the third step when I select the node for my JDBC system, "Loading..." is displayed but nothing happens after that.
I have tested the connection for my system and it's working properly. When I go to Metadata Loader in DQE, I can see the schemas for my system but not the tables (in the left pane).
Any ideas on how to solve this problem?
Rajiv
PS: I'm on EP 6, SP 16.

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

Similar Messages

Query iView Does Not Display Sql Server Tables

I have a system connected to a SQL Server (2000 Enterprise) and the Connection Tests works properly.
When I start to create a Query iView, I get to the point where I must select a JDBC system and select tables from it. When I select the tree node of my system, it displays "Loading ..." and then this disappears and nothing is displayed for this system.
Funny thing, I can create a Stored Procedure iview for this system, and it displays the available stored procedures.
Any ideas of the problem?
Daniel

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

Dashboard Design 4.0 Query Browser - Does not display universe

Hello Gurus,
We have an issue with our QA system which is not showing universes in query browser. It was working until yesterday.
Now the dashboard does not work in design mode as well as in BI Launch pad. It keeps running but does not do anything.
Xcelsiuswebservice & Dashboards services are not showing any issues.
Any help would be appreciated.
We have a load balance on our tomcat servers and the default webservice url is botst ( not botst:8080 ) as the port has been configured in load balancer . Same configuration in boprd and works fine.
Thanks
Sanjay

hi.
sorry that i dont know about your problem but i want to ask question about "load balancer"..can u give me a mail adress please

REUSE_ALV_LIST_DISPLAY does not display internal table contents

Hi,
Im having a weird problem at my hand. Im using the function module REUSE_ALV_LIST_DISPLAY to display a basic list. I have the contents in an internal table. I have built a field catalog and its working fine. Im passing the internal table to the FM, but in the output I can't see any of the table entries.
Im new to ALV programming. Please guide me in this regard. Also I would be thankful, if I could be provided with some links for learning more about 'ALV Lists'.

Hi,
Check out whether the data is present in the intenaltable or not. Try to debug ur program where it is not processing.
If the problem persists try to post ur code in this thread. Let me check it.
ALV programs.
http://www.geocities.com/mpioud/Abap_programs.html
. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
ALV
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Regards,
Priyanka.

SQL Developer 1.1 Query Builder does not display connection tree

I have installed SQL Developer 1.1 on a PC running Windows XP SP2. I am connecting to Oracle 9.2.0.7.0.
After connecting to the database, I right click in the SQL Worksheet and select Query Builder and when the new window is displayed, there are no tables to select from.
What is causing this?

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

The BI report created by Query designer does not display all columns

Dear Experts,
I have created a BI report using the Query Designer.
When I execute the query, only 6 columns have been displayed.
The total columns are 12. I need to display all 12 columns at the first instance.
Could any one help me to resolve this problem?
Thank you very much!
Arthur

Hi Athul,
Thanks for your reply.
There is not marked for '.Supress Zero' in the Rows and Columns.
And I did not check for 'Hide repeated values' in the Display tab.
Any other place you could suggest to verify?
Thanks
Arthur

Bex Analyzer 70 opens query but does not display results

Hi Gurus,
My computer is windows XP 2002with Service Pack2. I have MS Office 2003.
My SAP GUI is 7.1 with SP 5. ( I am unable to install Windows XP SP3 on my computer).
70 Analyzer is not working for me. When I log in, the XL sheet comes up but the Bex realted icons are not showing up.
When I open 3.x Analyzer, it works fine. The XL has BEX icons andI can open the query and get results.
Any suggestions are greatly appreciated andI would award points.
Thanks in advance.

Rao,
This is common problem.
Try to get latest patches in 7.0 and u can take help of any Basis person.
bhaskar

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Query on SQL Developer Connections Tree Does Not Display Objects

Hi Gurus, Could you please clarify on the below. As per the note ID 1458753.1, SQL Developer Connections Tree Does Not Display Objects to user in order to access database objects outside the owned schema/account. ------------------------- By default, and without granting wide privileges such as DBA, a user will only see his or her own objects in the first level object nodes under their connection. Objects in other schemas must be accessed via the Other Users node under the connection. This is the intended functionality/display in SQL Developer. ------------------------- Is there any other way we can achieve this? Requirement is very common - user A owns all objects and user B granted read/read-write privileges on user A objects. Now user B wants to Display user A objects in the corresponding objects node of SQL developer. Could any one shed some light here? Thanks Venu

First off, there is a dedicated SQL Developer forum where lots of the developers hang out. Those folks are way more knowledgable that we are about the tool.
That said, I have no problem displaying dates. Do you just have a problem with this particular query/ field/ table? Or does it affect all dates? What version of SQL Developer are you using? 1.1 is out now.
Justin

User-Defined Type does not display values in Table Data grid

I have a User defined Type that is a collection of one character VARCHAR2 values. In the Table Data grid it does not display the character values. I know on all our other Oracle development applications these values display. Is this a bug or is there a snippet to display these values?

Version: 1.0.0.15
DB: 10.2.0
Workstation OS: Windows XP

The query does not reference any table when attempting to build the WHERE clause. (IES 00022)

Hi
I am getting below error.
The query does not reference any table when attempting to build the WHERE clause. (IES 00022)
This error is in Validating Measue object in IDT.
It is not throwing error for dimensions objects but only for measure objects.
My BO version is 4.1
Backend is Teradata 14.1.
Regards
Gaurav.

Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

Hello Everyone,
How to update zero to a column value when record does not exist in table but should display the column value when it exists in table
Regards
Regards Gautam S

As per my understanding...
You Would like to see this
Code:
SELECT COALESCE(Salary,0) from Employee;
Regards
Shivaprasad S
Please mark as answer if helpful
Shiv

ADF swing: JTabbedPane does not display column names.

Hi all,
I have created an ADF Panel, which allows the user to run a few simple queries against an Oracle database done using ADF view objects and ADF view links and ADF application module.
From the data control area I drag and drop a view link containing a query into a JTabbedPane. But when I run the ADF panel, JTabbedPane does not display the column headers from the SQL as opposed to JScrollPane which does.
Suppose you do a select * from departments(dep_id, manager, state_cd), you will see all column headers meaning dep_id, manager, state_cd, and under each column the corresponding data which was retuned by the SQL if you use JScrollPane. But if you use you use JTabbedPane then you would only see the data which was retuned by the SQL without seeing the column header names meaning dep_id, manager, state_cd.
What do I need to do to make JTabbedPane display columns headers?
I would appreciate your input.
Thanks.
Bobby A.

Hi,
JScrollPane should be used. You can add this into a JTabbedPane if you like. Not all Swing panel show table headers
Frank

Object Builder does not display

I installed SAP Front End on my computer.
I need to use program to assess SAP , so I need to use SAP R/3 DCOM Connector.
After I do some setting in SAP R/3 DCOM Connector, and when I connect to a destination, I find the connection is OK.
But when I open the page which contains Object Builder, I find it does not display.
My OS is windows 2000. I don' t have MTS in my computer, but there are Component Services. When I open Component Services, I can't find anything related to SAP.
Can anybody help me?

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

Query iView does not display DB2 tables

Similar Messages

Maybe you are looking for