Query iView Does Not Display Sql Server Tables

I have a system connected to a SQL Server (2000 Enterprise) and the Connection Tests works properly.
When I start to create a Query iView, I get to the point where I must select a JDBC system and select tables from it. When I select the tree node of my system, it displays "Loading ..." and then this disappears and nothing is displayed for this system.
Funny thing, I can create a Stored Procedure iview for this system, and it displays the available stored procedures.
Any ideas of the problem?
Daniel

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

Similar Messages

Query iView does not display DB2 tables

Hi All,
I'm trying to connect to a DB2 database and have created a System object for that. When I'm creating the Query iView, in the third step when I select the node for my JDBC system, "Loading..." is displayed but nothing happens after that.
I have tested the connection for my system and it's working properly. When I go to Metadata Loader in DQE, I can see the schemas for my system but not the tables (in the left pane).
Any ideas on how to solve this problem?
Rajiv
PS: I'm on EP 6, SP 16.

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."

I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?

Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang

CR 2008 SP3 FP 3.4 does not provide SQL Server Native Client 10.0

One of my clients is running Crystal Reports 2008 SP3 Fix Pack 3.4 on a Windows 2008 R2 server and is running MS SQL 2008 (not R2) on a separate Windows 2008 R2 server. This was installed to correct printer issues. As expected, they started getting errors on some that use dates in the record selection formula.
I informed them that we needed to change the data connection driver from "Microsoft OLE DB Provider for SQL Server' to "SQL Server Native Client 10.0". When they go in to create a new data connection the OLE DB (ADO) Provider list does not list "SQL Server Native Client 10.0" as an option.
As I understand it from another thread on this site, this OLE DB client version is required for CR 2008 to properly interface with SQL 2008 and that it should be available after installing FP 3.2 or 3.3. I made sure that they installed all fix packs in their released order.
Can anyone shed some light on this for me?

Hello,
Actually there is:
{tblCaseData.CloseCodeID} = 2
and {tblCaseData.CaseSplitTrusteeCode} 'A'
and {%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} )
and {%sql_CountACH} = 0
and {%sql_CountNameIDParties} = 0
and {%sql_CourtWageDir} = 0
{%sql_Adj341Date} >= {?pf_BeginDate} and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ) is the result of NOT statement.
Try something like this:
{tblCaseData.CloseCodeID} = 2
and {tblCaseData.CaseSplitTrusteeCode} 'A'
and ({%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ))
and {%sql_CountACH} = 0
and {%sql_CountNameIDParties} = 0
and {%sql_CourtWageDir} = 0
I added AND/OR/NOT etc. logic to:
and ({%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ))
You'll have to figure out what the correct bracketing should be for your data and what you want to get out of it. Possibly moving the date part to the end of the selection formula will "fix" this.
Thank you
Don

User-Defined Type does not display values in Table Data grid

I have a User defined Type that is a collection of one character VARCHAR2 values. In the Table Data grid it does not display the character values. I know on all our other Oracle development applications these values display. Is this a bug or is there a snippet to display these values?

Version: 1.0.0.15
DB: 10.2.0
Workstation OS: Windows XP

Firefox does not display button and table in High Contrast Theme

When i'm using the high contrast theme in Windows 7, the webpage i'm accessing does not show layouts for tables, textboxes and buttons, whereas while accessing the same page with other browsers (i.e Chrome,IE) I can view them correctly. Please suggest whether it is possible to get the layouts in High contrast theme, if Yes, kindly tell the detailed steps to do that!
TIA

This is an image of what displays for me

Dashboard Design 4.0 Query Browser - Does not display universe

Hello Gurus,
We have an issue with our QA system which is not showing universes in query browser. It was working until yesterday.
Now the dashboard does not work in design mode as well as in BI Launch pad. It keeps running but does not do anything.
Xcelsiuswebservice & Dashboards services are not showing any issues.
Any help would be appreciated.
We have a load balance on our tomcat servers and the default webservice url is botst ( not botst:8080 ) as the port has been configured in load balancer . Same configuration in boprd and works fine.
Thanks
Sanjay

hi.
sorry that i dont know about your problem but i want to ask question about "load balancer"..can u give me a mail adress please

SQL Developer 1.1 Query Builder does not display connection tree

I have installed SQL Developer 1.1 on a PC running Windows XP SP2. I am connecting to Oracle 9.2.0.7.0.
After connecting to the database, I right click in the SQL Worksheet and select Query Builder and when the new window is displayed, there are no tables to select from.
What is causing this?

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

The BI report created by Query designer does not display all columns

Dear Experts,
I have created a BI report using the Query Designer.
When I execute the query, only 6 columns have been displayed.
The total columns are 12. I need to display all 12 columns at the first instance.
Could any one help me to resolve this problem?
Thank you very much!
Arthur

Hi Athul,
Thanks for your reply.
There is not marked for '.Supress Zero' in the Rows and Columns.
And I did not check for 'Hide repeated values' in the Display tab.
Any other place you could suggest to verify?
Thanks
Arthur

Bex Analyzer 70 opens query but does not display results

Hi Gurus,
My computer is windows XP 2002with Service Pack2. I have MS Office 2003.
My SAP GUI is 7.1 with SP 5. ( I am unable to install Windows XP SP3 on my computer).
70 Analyzer is not working for me. When I log in, the XL sheet comes up but the Bex realted icons are not showing up.
When I open 3.x Analyzer, it works fine. The XL has BEX icons andI can open the query and get results.
Any suggestions are greatly appreciated andI would award points.
Thanks in advance.

Rao,
This is common problem.
Try to get latest patches in 7.0 and u can take help of any Basis person.
bhaskar

Query on SQL Developer Connections Tree Does Not Display Objects

Hi Gurus, Could you please clarify on the below. As per the note ID 1458753.1, SQL Developer Connections Tree Does Not Display Objects to user in order to access database objects outside the owned schema/account. ------------------------- By default, and without granting wide privileges such as DBA, a user will only see his or her own objects in the first level object nodes under their connection. Objects in other schemas must be accessed via the Other Users node under the connection. This is the intended functionality/display in SQL Developer. ------------------------- Is there any other way we can achieve this? Requirement is very common - user A owns all objects and user B granted read/read-write privileges on user A objects. Now user B wants to Display user A objects in the corresponding objects node of SQL developer. Could any one shed some light here? Thanks Venu

First off, there is a dedicated SQL Developer forum where lots of the developers hang out. Those folks are way more knowledgable that we are about the tool.
That said, I have no problem displaying dates. Do you just have a problem with this particular query/ field/ table? Or does it affect all dates? What version of SQL Developer are you using? 1.1 is out now.
Justin

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

SQL Server Management 6.5.1.0 and 6.5.4.0 does not discovery SQL 2008 databases on Windows 2003

SQL Server Management 6.5.1.0 and 6.5.4.0 does not discovery SQL 2008 databases on a custom instance name or when multiple SQL instances are installed on Windows 2003.
OS Version: Windows 2203 x64 with SP2
Database Version: 10.3.5869.0
The instance in this case: I01 is running on port 49168.
SQL Server Network Configuration | Protocols for I01 | IP Addresses | IPAll | TCP Port = 49168
The DB Engine class is discovered but not the "Tcp Port" property.
The database discovery script then fails as it is missing the 8th parameter; The Port.
Looking at the discovery script DiscoverSQL2008DBEngineDiscovery.vbs i see the following WMI query.
Set oWMI = GetObject("winmgmts:\\" & computerName & "\root\Microsoft\SqlServer\" & SQL_WMI_NAMESPACE)
Set oQuery = oWMI.ExecQuery("SELECT * FROM ServerNetworkProtocolProperty
Using WMI Explorer if I connect to namespace: root\Microsoft\SqlServer\ComputerManagement10
and query "SELECT * FROM ServerNetworkProtocolProperty". There are no instances.
What am I missing or doing wrong?
Closely related to this article. https://gallery.technet.microsoft.com/Hotfix-Management-Pack-SQL-17cf1118#content.
Thanks
Gavin

Hi,
I would like to know is there any update about the issue. If the issue is solved, will you please share the resolution here to help others in this forum who encounter similar issue.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

RH7 - Custom WebHelp Pro skin custom "Print" button does NOT display in version published to RH Server 8

I customized a WebHelp Pro skin using the Omega skin as the basis. Everything works fine except the Print button, which I added using the same Action as shown in the BeautifulVista skin's Print button.
Local Version (C: drive)
When I generate my help project and view it locally from my C: drive after I accept the warning about viewing locally, I see the Print button.
However, it does NOT work. I've attached a graphic that shows the local version and the skin dialog where I set up the action for the Print button.
RH Server 8 version
When I view the same project after I publish it to the server, the Print button does NOT display.
QUESTIONS ARE:
How do I get the Print button to function properly (active printer dialog)?
If it can't work until it is published that fine but then how do I get it display when I view from server?

Hi there
Have you tried editing your Window Definition?
Click View > Pods > Project Setup
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Query iView Does Not Display Sql Server Tables

Similar Messages

Maybe you are looking for