Query Limits - Max Time not working

A Max Time Query Limit has been set for a DB but it never acknowledges it and the query carries on running in the underlying DB even after cancelling the query, and closing the browser.
Has anyone seen this before? The Max Time is enabled, and the connection is always via a shared user.

Hi,
Try this below link
http://shivabizint.wordpress.com/2008/10/02/to-avoid-request-cancelled-message-when-running-long-reports-in-obiee-answers
Regards
Naresh

Similar Messages

  • Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down

    Hello,
    We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
    Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down
    Any pointers how to do it please
    Thanks
    Krishna

    Hi,
    WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
    You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
    Regards,
    Loic

  • Have 5s is crooked and button Sam time not working good I buy it in may 2014 .

    have 5s is crooked and button Sam time not working good I buy it in may 2014 still under warranty  .

    If this is a hardware problem, contact Apple Support or visit an Authorized Apple Service Provider to get it serviced.
    iPhone - Contact Support - Apple Support
    To rule out a software issue, set it up as new device, explained here:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • Query key Date Variable not working

    Hi Folks -
         I am coming across an issue with which some of you might be able to help me. I have a time dependent master data object which I've marked as a datatarget and have created a report on it. I wanted to give the user an option of specifying the key date and hence have created a variable in the query properties for the key date. This variable is of the type SINGLE VALUE, MANDATORY, USER ENTRY and CAN BE CHANGED DURING QUERY NAVIGATION.
         Now my issue is that even though I enter a specific key date, the query is not pulling the records according to the key date. But instead if I use the option of specifying a particular date (instead of a variable in query properties), the query is running fine!!! Can someone please let me know why this is happening? Why is the query working fine when I mention a single constant value but not when I use a variable? Thanks for your help in advance.

    hi
    This clearly shows your variable is not working fine
    So in RSRT transaction debug using your variable
    See in every step whether the variable is working properly
    Assign points if useful
    Thanks
    N Ganesh

  • ReadObject query by idfr does not work first call

    I am running Toplink 10.1.3.0.0 inside the oc4j container. A basic example is that I have an object Employee that has a String attribute id. This class goes to the employee table. I have set an Expression in the Toplink Workbench to do Read Object and it just checks that id = the idfr passed in as an argument. When running the query by the idfr in the container, the idfr is set as the argument and the data exists in the database. With Toplink logging turned onto FINE I see the query being run "select xyz from employee where idfr = x". But the return value from the query is null. But if I run the query through a second time it returns with the correct object. I have tried changing this to a Read All query, and then just accessing the 0th element from the List returned, and this seems to work fine. I am still concerned, though, as to why the Read Object query does not work on the first go around as is expected?

    Any reason you set the Read Object query? The Expression you've provided is the same as what TopLink generates.
    Out of interest, does the problem occur if your primary key attribute is an int/long, or some other numeric type. Does your String attribute value or query id value have trailing or leading spaces? Oracle database will trim leading and trailing blanks on INSERT/UPDATE which can lead to confusion.
    Turn the logging up to FINEST and look for log messages relating to registration of existing objects. If you can post the test code and log that would help.
    --Shaun                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Content query web part is not working after chaning the DNS entry

    Hi all,
    We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
    quey server its not working fine and its giving error message as bellow.
    Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
    Can anyone help me to fix this issue please.

    I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
    web part is added to the page the fallowing error message is displayed.
    Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
    Can anyone help me to fix this issue please.

  • Ichat - getting started for first time NOT Working ..please help

    I opened the Ichat application for th every first time today. When I open the app a box pops up and asks you to enter your user name and password and with which type of account you want to log in with, etc. First, I chose my mobile me account ( I also have a mac.com account and teh same thing I am going to describe happens with it as well for it is not an apple id dependent problem). I do so and click continue. The next screen comes up in the box and it is titled " encrypted ". Then in the box it says you are now ready to use ichat" . At the bottom of the box it says click done to begin using ichat.
    Thus, is my problem. There is no "done" option to click on. The only button options to click on are: "learn more" , "go back" or "continue" . If I click "continue" nothing happens and I cannot do anything or begin using ichat. If I like "learn more" nothing happes at all - thus, the same result as clicking "continue". If I click back it will goto the previous screens but nothing changes.
    Has anyone experienced this before? It seems strange and odd for an apple software to be so deleterious. How do i fix it so I can use iChat?
    Any help is greatly appreciated. Thank you in advance. Jenna

    Hi
    Welcome to the    Discussions
    Unfortunately although very rare some people do find that iChat does this.
    Do this first.
    Open your Home Folder (Little House icon)
    Go to the Preferences Folder within and then find all the com.apple.iChat(xxx).plist items and delete them.
    Try iChat again.
    You should see several Start Up Screens.
    1) A Welcome Screen.
    2) A Valid AIM name (Includes options for MobileMe and @mac.com as well as AIM) plus confirming your Name (Your name maybe Prefilled from the Address Book)
    3) the Bonjour Enable (or not) screen.
    4) The Jabber option (Includes GoogleTalk) This Screen includes options to change Server Names and Ports under the text fields for the Jabber ID.
    5) A Video Preview pane. (You can use this to take a Snapshot for your Buddy Pic)
    6) a Details of Accounts you have set up screen.
    7) the Done Screen.
    More on this with Pictures here
    If this does not work we may have to get you to Reinstall iChat.
    How much work this entails depends how far your OS has been updated above the Install Disk Level.
    Could you tell me what OS version the Install Disk is (What came on your Computer when new) ?
    And what OS level you are currently using ?
    7:23 PM Friday; December 3, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • "Show my windows and tabs from last time" not working, Mac OS 10.6.4, FF 3.8.10 or FF 4 Beta 6

    I have tried any number of times to get this to work, but it's still not working. On my other Mac with OS 10.6.4 and FF 3.6.8/10 the "show my windows and tabs from last time" is working just fine.
    I have checked some of the settings in about:config per some of the other forum posts with resolution to this issue, but this hasn't worked for me. Especially Since some settings have changed in the more recent versions of FF.
    I'm pretty sure my settings are correct. Is anyone else having this same issue?
    On the Mac exhibiting the issue it prompts me if I want to close all open tabs when the red X is clicked, when I quit firefox it keeps my tabs open just fine when firefox starts up the next time. This is normal behavior, but when the feature in question is active it overrides this behavior, on my other mac, and just stores my last session so that when I open firefox all is as it was before it was closed (either closing it via quit or with the red X will do the trick).
    On my new mac, the prompt to close open tabs never goes away and my tabs just vanish, whichever way I close firefox.
    I hope that was clear enough. Thanks for any help.

    See http://kb.mozillazine.org/Session_Restore
    If you use [[Clear Recent History]] in Firefox 3.5 and later to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

  • Query on database column not working

    Hi
    i have a block which has around 40 columns.the block is based on a table which has more than 20000 records.When i try 2 make query on a Database column in Enter-Query mode its not working.It fetching all the records instead of the respective records
    THe block property is said to yes
    i have even set the query allowed,only propery of the column to YEs
    Can any one help me out of this??? do i need to set any other property???

    Thanks a lot for james and THomas and to all. The error is that i have missed the bracket for OR in my where condition ...Now im able to query all the columns.
    Thanks very much...
    I have one more doubt .i have a requirement in which when the user goes to the child block and makes a query is it possible to bring the associates parent records..wht code or trigger we need to rite ?
    normally we do for parent block when we query we populate the child. is this can be done?

  • TS2755 I living in Israel using Hot Mobile an 3.9G network, transferred my old number from another carrier and for some reason the imessage / face-time not working anymore even restore not helped, it stuck on "waiting for activation" please help

    when i try to active the imessage or facetime it typing "Waiting for activation" and stuck like this.
    when i go to setting > phone > i see the correct number.
    i think i read the whole google already trying resolving this issue tried everything, even restored my phone and actived the new sim using itunes.
    but still not working same error.
    the NEW sim of HOT MOBILE gave me a temporary number which worked fine its was 053-xxxxxx
    after somthing the transfer like 24 later hours they transfered my old number from another carrier witch is 054-xxxxxx
    and now not working.
    called my carrier and they has no idea how to fix that.
    they told me contact apple.
    P L E A S E    H E L P. . .

    Hi guys,
    I keep getting "waiting for activation" on my iMessage. I can only send/receive iMessage from my email address, NOT my phone number.
    I have done all kind of fixing suggestions that I can find online, but nothing works so far.
    - Date & time set as automatic (I don't know why this matter, but mine was already set as automatic from the begining)
    - Reset network setting
    - Changing the DNS to 8.8.8.8.
    - Restore to factory setting (from back up & as new iPhone)
    - Turning on/off iMessage & facetime
    - Sign out/in of apple ID
    - Change location from apple ID
    - Hard reset/reboot
    And many others.
    ...me too. I'm in Portugal having the same issue!! Hopefuly Apple will give us a solution, shortly...

  • Refresh Query with variable is not working

    I have issue with my query.
    0customer -Property (key and text) and Selection parameter
    When I place 0customer in the filter area and save the query execute the query and refresh the query I am able to change the customer number parameter values.
    Variable has option  Can be changed during query execution. Filter value is also not displaying in the report
    When I move 0customer in the  Row area and save the query -first time it is displaying the selection parameter values and when you hit refresh it will refresh the same query .but it is not populating the selection parameter .
    advance thx

    You can display values& texts for variables using menu button where you can display the text elements.
    Regards
    Pradip

  • Face time not working in egypt

    I bought two iPhone 4 one from apple store in Paris n the other from Vodafone in Egypt and the one from Egypt have face time but is not activating so does anyone know how to activate it although my Paris iPhone is activating face time automatically n it is working fine

    Guys I have just contacted the apple support and i have a little chat with them regarding this issue as i have the same question, my case is i have bought iPhone 6 plus from the UAE apple store and for sure there is no FaceTime application or even FaceTime in the settings as they are disabling this feature in UAE, However i will use this i phone in Egypt which they are enabling this feature in Egypt as i have another i phone with Egypt Sim Card and it works fine so i asked them i want to use the iPhone 6 that i have just bought in Egypt and enabling the FaceTime is that possible ? and they replied with if my country are not denying using FaceTime and iMessage thew will work fine. as they are disabling this function by location only, so once i will be in Egypt i have to restore my phone and it will relocate my location Automatically and the FaceTime and the iMessage will work then as long as my carrier provider is allowing this function.
    and actually that make sense as i never heard before anyone here in Egypt has iPhone with no FaceTime feature am always hearing this in UAE and KSA.
    I searched a lot online for answer for this question and i always find " it will not work " or "it disabled you can't enable it" and i really get disappointed for those answers as i payed a lot for this phone, so i guarantee to you that it will works in your phone as long as you are not in the districted country, and if you don't believe me you contact the Apple support by yourself.

  • FOIP max-conn not working

    max-conn in FOIP is not working properly. Even after i set max-conn to 1, possible to make 2 simultanious faxes to the specific dial-peer.
    Anyone know how to change the FOIP TIF attachemnt name (Cisco_fax.tif) to other name?

    This command applies to off-ramp Store and Forward Fax functions. verify you are using On Ramp or Off Ramp

  • MAX DateTime Not working

      SELECT MAX(DateTimeAdded) OVER(PARTITION BY PatientID ORDER BY DateTimeAdded)as DateTimeAdded
        FROM ClinicalVitalGroup CVG_D
    Msg 156, Level 15, State 1, Line 1
    Incorrect syntax near the keyword 'OVER'.
    Why is this not working???

    GROUP BY looks for unique value combinations of entire columns specified, so when you add one more column the column combination changes and it looks for the unique combination of all columns together. So combination of values for PatientID and
    ClientVitalGroupID  will still be unique though if you look at PatientID individually you
    may see duplicates.
    See this small illustration to understand it
    declare @t table
    Col1 int,
    Col2 int,
    Col3 varchar(10)
    insert @t
    select 1,2,'Test' union all
    select 1,3,'qwerty' union all
    select 1,3,'blah blah' union all
    select 1,4,'jbj' union all
    select 2,6,'jkhk' union all
    select 2,8,'kkjkl' union all
    select 2,8,'kljklj' union all
    select 2,11,'kklljl'
    select Col1,COUNT(*) AS Cnt
    from @t
    group by Col1
    The above code will return just two records as you've only two unique values for COl1 field (1 and 2)
    See output below
    Col1 Cnt
    1 4
    2 4
    Now add col2 also to group by and see
    You will get 6 records as there are six unique combinations for Col1 and Col2
    ie (1,2),(1,3),(1,4),(2,6),(2,8),(2,11)
    see
    declare @t table
    Col1 int,
    Col2 int,
    Col3 varchar(10)
    insert @t
    select 1,2,'Test' union all
    select 1,3,'qwerty' union all
    select 1,3,'blah blah' union all
    select 1,4,'jbj' union all
    select 2,6,'jkhk' union all
    select 2,8,'kkjkl' union all
    select 2,8,'kljklj' union all
    select 2,11,'kklljl'
    select Col1,Col2,COUNT(*) AS Cnt
    from @t
    group by Col1,Col2
    The output is
    Col1 Col2 Cnt
    1 2 1
    1 3 2
    1 4 1
    2 6 1
    2 8 2
    2 11 1
    If you analyze any one column again (Col1 or Col2) in above output you can see the value duplicating as GROUP BY just ensures the
    full combination of values being unique rather than the individual values themselves
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Max is not working in infopath form 2010

    Hi,
    I have created one form in infopath 2010.
    I want to get maximum id of a table when i click on new record.
    I am trying to use max() function for the same.
    But its not working for me.
    Please help to solve the issue.
    Thanks in advance!
    Regards
    Rajni

    Hi,
    According to your post, my understanding is that you want to get maximum item id of list in InfoPath 2010.
    Here is a blog for your reference:
    Auto-Numbering InfoPath Forms
    http://claytoncobb.wordpress.com/2009/06/15/auto-numbering-infopath-forms/
    Best Regards
    Dennis Guo
    TechNet Community Support

Maybe you are looking for