Query name from work book id

Hi Guys,
Iam in bex browser, iam seeing a report here how to find a query name using the work book id.
Thanks,
V.Singh.

Hi,
I am not sure how to do it in browser but if you have workbook id and you want to know all the queries inside it, then follow the below given procedure,
Goto table RSRWORKBOOK put your workbook id and collect all the GENUNIID's.
Now goto table RSRREPDIR and copy all the GENUNID's you will get required list of queries.
Regards,
Durgesh.

Similar Messages

Query name from Tcode

Hi
Is there any way to find the Query Name from the Tcode. The Tcode was assigned to the program which was generated form the query.
Regards

Hi,
Have you check SE93. you can find the following object
Report type-(D_SREPOVARI-REPORTTYPE)
User group-who created the query(D_SREPOVARI-REPORT)
Query name-(D_SREPOVARI-EXTDREPORT)
Its depend how you are assigning T code for queries. If you have created T code thru SE93 and with Transaction with parameters (parameter transaction) seting , then you can see the above details.
Kind Regards,
Dinabandhu.

Delete query names from roles and favorites

I deleted some of the queries in production using RSZDELETE but didn't delete those objects from roles and favorites. As the delete option is disabled in query dsigner and bex analyzer, I m looking for other ways to delete the query names from roles and favorites folders

PFCG is surely one of the ways to delete queries assigned to a role. But i doubt you might have access to tat tcode in production.
If you are looking towards deleting the queries from roles and favorites using Bex analyzer, you need specific authorizations. If you have those authorizations you can surely delete the queries from roles and favorites using Bex analyzer.
Hope this helps.
Regards
Gaurav

Mail fails to recognize names from address book

My information in address book shows as follows
Name: J Doe
Email address: [email protected]
If someone has me in their address book as Doe John and sends an email to me at my email address ([email protected]), Mail.app does not recognize me and asks me if I want to 'Add to Address Book'.
The same happens if a sender has a minor change in the Name (such as even a dot in the name) of any recipient, regardless of the fact that I have the correct name in the address book. Mail fails to recognize the recipient even though the email address is identical, and will ask me if I want to 'Add to Address Book'.
One would expect Mail to use just the email address and recognize the contact as already being in the Address Book.
I just spent a good three hours investigating this.
There have been numerous posts discussing this both here and elsewhere over the years but I'm surprised that there has not been a solution. Here are some examples..
1. Mail can't recognize my contact email address
2. Address Book editing
3. Mail doesn't show names from the Address Book
In the 3rd example above, Golden Shoes suggests that this is the same for every email client, but I must disagree because Postbox and Thunderbird does display the information correctly from the Address Book, infact Postbox does this impressively I must add.
It would be great if this was fixable in Mail. Is there a solution for this?

I followed your suggestions.
Both AB and AB within Mail were empty of contacts after I deleted my iCloud contacts from the mac. I even did a reboot just in case. After this, I rechecked contacts and all my contacts appeared again both in AB and AB within Mail.
I quit and reopened Mail to find that the problem still persisted. I know and rechecked that these contacts are not present in my previous recipients list so it is definitely not that database which is preventing this.
The funny thing (maybe not funny since this is really bugging me) is that Mail on iOS (iPhone) works just fine. The Mail on iPhone seems to query the sender/recipient email address, accurately realizes that the contact is already in the AB, and shows as such. The same email in Mail.app on the mac asks me if I want to add the contact to AB.
Is this really a unique situation? Is everyone else not experiencing the same?
If you ask someone to change your name within their address book and send an email to you, does Mail on the mac recognize you regardless of what that sender named you as? Or does it ask you to add to AB?

How to find Query Name from Report Name

I am trying to find a the query name for program AQFKSYSTQV000045ZCHECKNUMBERLU I have looked in Standard Work Area under all of the user groups but no luck. It is currently only in our Production System. Please suggest any other places I can look.
Thanks in advance for your help!

I apologize for not seeming like I have a clue....I did search the Forum...and maybe I wasn't clear with my question....again I apologize.....I am somewhat familiar with query and I understand that the query name is probably ZCHECKNUMBERLU. My issue is that I cannot find the user group. I have broken It is not a user group under Global Area or Standard Area. For example....We have a query named ASETAQUISITION. The program name is AQFKAM==========ASETAQUISITION...This query is located in the AM User Group....Easy Find. However, the program in question is AQFKSYSTQV000045ZCHECKNUMBERLU. I have broken this program name apart every way I can think of and I cannot find a user group in my global or standard Area. So I guess I should ask, by looking at that program name, how do you determine what the user group name is so I can find the actual query?

How to find a query name from report name

I have a report in my system with the name AQICMM==========P2============ . I believe this was created from a query. How to find the query corresponding to this report ? I need to change the logic for certain columns of the report. How to know if this was created from SQVI or SQ01 or any other transaction.
THanks.

Found it..Query name is P2. It was in a different query area..Standard area and not custom area where I was initially looking at.
Edited by: Shareen Hegde on Aug 22, 2008 5:14 PM

Preference for not using middle names from address book in emails

I have quite a few contacts that I have their middle names in my address book. When I type their name in a new email, their full name is displayed in the "To" field. I don't want the middle name to show up in my outgoing emails. I also don't want to delete everyones middle name from my address book. Are there any preferences or plugins that allow this behavior?
I also have some contacts that I have nicknames for...the most glaringly obvious being "Mom" and "Dad." I don't want to send an email to my parents with their name in the "To" field. Is there a plugin or a preference for this as well

Greetings,
Sorry, but there's no way to do what you want. The only way to avoid using a middle name in the To: field is for you to delete that from your contact, and from the Previous Recipients list in Mail. The same would be true for those contacts where you have a nickname.
But ultimately, the name use by Mail and Address Book would be determined by the recipient when they send you an email; if they use their full name, that's what Address Book will change it to.

Printing "child" names from Address Book on address labels

When I put selected "child" names on Address Books entries and try to print address labels including the kid's names, they don't appear. Example: I add "Jim" as a child name to an Address Book entry for Mike Jones. I try to print the Address Label: Mike Jones and Jim. Jim will not print. "JI" will print. "Jimm" will print. Anybody else have this problem? What's going on?

From another thread:
If you have a spouse or child listed on contact card it will print them all on the mailing label IF the first name of each person is unique to your entire address book. For example, if the contact is John Brown and the spouse is listed as Susan Brown and the child is listed as Chester Brown, the expectation is that the label would print as:
John, Susan and Chester Brown
This assumes that there are no other contacts in your address book with the first name of Susan or Chester. However, if, for example, you have another person in your contact list named Susan (the last name could be anything), Address Book will print:
John and Chester Brown
This is because Address Book looks at all the first names in your contact list and if it sees a first name that is also listed in one of the spouse or child fields then it looks to see if the the other contact shares the same address as the contact you are trying to print. If the address is the same, then it prints properly on the label. If not, then it doesn't print on the label. So if you have two Susans - Susan Anderson and Susan Brown - Address book looks at the address on each card and determines that Susan Brown has the same address as the contact you are trying to print (John Brown) and therefore prints her name on the label.
So, to make a long story short, if you want consistent and predictable results when printing your labels you should assign a unique card to each person that you want to appear on the label and make sure that the individual cards have the same address listed on each. So, in the above example, there would be a card for John Brown, a card for Susan Brown, and a card for Chester Brown. On John Brown's card, Susan Brown would be listed as spouse and Chester Brown would be listed as child. Print John Brown's card and you should get:
John, Susan and Chester Brown
Although this makes logical sense, it's not incredibly intuitive and not very well documented by Apple. I was hoping they would enhance Address Book in Leopard since this seems like a feature that a lot of people would use around this time of year. Unfortunately, that wasn't the case this time around.

ICal incorrectly takes name from Address Book to show in birthday calendar

When I-Cal takes the name of a birthday person from Address Book to post a reminder on the birthday calendar of I-Cal it shows the first name as though it was the last name. I have verified this problem by reversing the names in Address Book, whereupon I-Cal shows the name correctly in the birthday calendar.
Obviously the program is defective and needs to be corrected.

You probably have not clicked the "show birthday calander" in the ical preferences pane

How to get the non technical query name from table?

Hello,
The table RSZCOMPDIR gives me the list of queries. The field COMPID contains the technical query name.
But how can I get the non technical name of a query? Which table holds this information?
Thanks and Regards,
Sheetal

Hi Sheetal,
You can get this info from RSZELTTXT.
Hope this helps...

How to get the query name from portal report name

Hi Experts ,
I am given a portal report Name and asked to do changes to the queries of that ,so how do i get the query name ,
Thanks in Advance
Nitya

Hi Nithya,
You can get the technical name by selecting the role in the portal where the report is enclosed you will generally find the report in description then identify the report you are looking then double click on that you will get a window pop-up in that you will have details tab there click on the details the your Query technical name will be displayed.
EX : zqry_w001 Then replace W with Q and seach in analyser or Designer.
Regards
Amar.

When i changed the names of my books in iTunes, it did not changed in the iPad after i had synced it again with the changes. can anyone help? i had added authors to the author column and deleted their names from the book titles.

i had added books to iBooks on iTunes and synced with my iPad mini. Then I realised that the titles sometimes had the author name, or a random number before it. I made changes to all the books in my iTunes library, edited the titles, added authors to the author columns, year in year column etc and synced my iPad again. but my iPad did not update these changes at all is still in the old way. can this be rectified?

Have you tried closing the iTunes store app via the multitasking bar and seeing if it works when you re-open it
Have you tried closing the app via the taskbar ? (I assume that your iPad is on iOS 6, though the version that your tagline shows, 6.1.6, is not a version for iPads) From the home screen (i.e. not with iTunes store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iTunes app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

TB on new Windows 8.1 computer won't lookup names from address book

The computer came with Windows 8 and TB worked fine. After upgrading to Windows 8.1 Update, I had to reload the address book from an old Outlook Express system under Windows XP. Now the address lookup isn't happening when I create a new email.

I should add that I am trying to get the autofill function working but all that happens is that characters appear in red as I type in the email address until the complete address is typed.

Delete large number of names from address book

By mistake I imported a large database of names and addresses into Address book a while ago.
I now find the Address book is too bulky and wish to remove 80% of the names.
How can I do this easily? Or is is simple to start a new address book from scratch?
Thanks

Thanks, rkaufmann87, I've tried that many times thinking I can sneak up on it (funny when we're to the point to try ANYTHING)----AB not cooperating on that one, either. The group will delete, but the names/cards are still on the main list and won't delete from the main Address Book. If you "select all" it goes back to the Address Book main list, not the group which is wanting to be deleted.

Sorting names from address book

How do I do a secondary sort by first name after I have sorted by last name so that my people are listed alphabetically by first name if they have the same last name?

Thank for the feedback.
In the future, don't forget that the Help and the PDF User Guide are our friends.
Searching for 'sort' returns a link to the page 'Sorting table cells'
which states:
To sort all the cells in a column and then re-sort the results using another column’s values, open the Sort & Filter panel, choose a column and sort order in the Sort pop-up menus, _click +, choose another column and sort order,_ and then click Refresh.
Yvan KOENIG (from FRANCE dimanche 7 décembre 2008 12:46:46)

Query name from work book id

Similar Messages

Maybe you are looking for