Query names in transports

Hi,
I have transported a bulk of bw queries. Now I want the list of these queries that were transported. I am able to
see only the object name and NOT the query name(description). I wnat to see the technical name /description of
these queries. How to do this??
Thanks

Hi,
this is not possible.....
copy the technical IDs of elements tranported (from the tp request object list)
and paste them in field ELTUID of table RZSELTDIR (OBJVERS = A) via SE11/SE16.
You can also use RSZCOMPDIR or RSRREPDIR (queries only) tables
hope this helps...
Olivier.

Similar Messages

Find Query Name in Transport Request or In TR what are Queries.

Dear All,
I would like to find a Query Name in Transport Request(DEVK.....) or Vice-Versa in Transport Request (DEVK........), what are the queries are included. I created SAP Query using SQ01 and assigned the InfoSet. The query is succesfully executing and getting the required result but I dont know the Transport Request Number which was created. In stead of creating New request, I would like to know the existing Transport Request what are the Queries are assigned.
Regards,
Ujed.

Hi
If you have included the Query in Transport using SAP Query Transport tool, it creates Transport request and makes an entry in the table AQTDB. Check the table entries in the table AQTDB.
~~~Ganesh Kumar K.

How to find query names in transport?

Hi Experts,
We have collected around five queries for transport. But in SE10, we do not see the query names. How to find out the query names there?
With Kind Regards,
Kannan

Open query in query designer.
From 'Properties' window (right side Window) dropdown select query.
From 'Advanced' tab copy the UID. U can search that in SE09.
OR
Copy that query ID from SE10, use table RSZELTDIR with that ID.

How to collect the deleted query in a transport request.

Hi Friends,
I have created a query and transported it to the Quality, the data content is all ok, except that i have not used the Project Naming conventions. Now i have a defect against my name for this. I have to copy the same query with the correct Naming convention and transport it.
My question is after copying the query with correct name i have to delete the old query (if not there would be 2 versions of the same query). How do i collect the deleted image of the query in a transport and send it to quality?.
I tried deleting a test query from Bex Designer, but this does not ask me for a transport. should i use RSZDELETE?. Not sure if it asks for a transport request when i delete the query.
Can someone pls tell me how to go about this?.
Thanks in advance.
BN

Hi BN,
I do agree that deleting directly in Quality and Prod is not good way and not recommeded.
I have not tried and deleted.But if the system is configured in such a way that if it doesnt ask for a request
then i feel you have no option.
If any object is deleted then you must have the deletion image collected into request at the same point when you are deleting.Because later when we go to transport connection we wont find the object itself.
What i think from your point as you said you have done earlier is you must have any open request regrding this query and when this query is deleted , the deletion image is also included in the same request.
So go to se03 and give your deleted query name and check all the requests.
Check in the requests when the deletion image is captured or not. we might be knowing that this is cpatured.
Regards
vamsi
Edited by: vamsi talluri on Nov 9, 2010 9:14 PM

Query Element in Transport Connection

Gurus,
    When i transported my report to production it failed because some elements are
    missing;
    Question1 - How do i identify the objects based on the GUID (that long alpha
                      numeric number).
    Question2 - I don't know how i missed couple of elements because i have
                      collected the query element in transport connection, thought it
                      would bring any object associated with the query.
Thanks a lot..

Hi Geni,
I would take the objects which are in red in the failed request.
copy that object from the list which is the ELTUID.
Then goto se16 > RSZELTDIR table
Enter that ELTUID which is the first field and execute
This will give u the name of the element which is missing from the transport request.
Then collect that element and transport again.
Hope this Helps.
Thanks
Majeed

How to find Query Name from Report Name

I am trying to find a the query name for program AQFKSYSTQV000045ZCHECKNUMBERLU I have looked in Standard Work Area under all of the user groups but no luck. It is currently only in our Production System. Please suggest any other places I can look.
Thanks in advance for your help!

I apologize for not seeming like I have a clue....I did search the Forum...and maybe I wasn't clear with my question....again I apologize.....I am somewhat familiar with query and I understand that the query name is probably ZCHECKNUMBERLU. My issue is that I cannot find the user group. I have broken It is not a user group under Global Area or Standard Area. For example....We have a query named ASETAQUISITION. The program name is AQFKAM==========ASETAQUISITION...This query is located in the AM User Group....Easy Find. However, the program in question is AQFKSYSTQV000045ZCHECKNUMBERLU. I have broken this program name apart every way I can think of and I cannot find a user group in my global or standard Area. So I guess I should ask, by looking at that program name, how do you determine what the user group name is so I can find the actual query?

How to find out Query name if i have Program generated by Query

Hi Gurus,
Can you please let me know the Query Name if i have the Program name.
The program name is : AQTQP2P=========INVENTORY_SUM=
I thought P2P is the user group and either "INVENTORY_SUM" or "AQTQP2P" is the
Query name but both doesn't exists in the system.
Is there any way to get the correct Query name and User Group from the Program name.
I have an FM : RSAQ_DECODE_REPORT_NAME to get Query name and User group name
but the reults given by them are P2P as user group and "INVENTORY_SUM" as Query name.
I did not find any one of them in SQ01.
Can you please help me out.
Thanks,
Vinay.

Hi ,
Thank for the information.
In have both the Function modules.
1. To get Query name from report name
2. To get Report name from Query name
I did all that stuff, still i did not find the User group or alteast some where near to it..
there is no User Group that starts with letter P.
But The report name is there
i could execute it in both foreground and in background and able to get the Output as well.
May be it is deleted from Development system.
I do not have auth in QA and in PRD to check it.
Can you please let me know
By any chance the Query can get deleted and the corresponding program exists for that Query and
we can work with the report even if the Query is deleted.
Any ways i am goind to give you points (Vinod/Atish) for your help.
Thanks,
Vinay,

How to get the query name from portal report name

Hi Experts ,
I am given a portal report Name and asked to do changes to the queries of that ,so how do i get the query name ,
Thanks in Advance
Nitya

Hi Nithya,
You can get the technical name by selecting the role in the portal where the report is enclosed you will generally find the report in description then identify the report you are looking then double click on that you will get a window pop-up in that you will have details tab there click on the details the your Query technical name will be displayed.
EX : zqry_w001 Then replace W with Q and seach in analyser or Designer.
Regards
Amar.

How to find a query name from report name

I have a report in my system with the name AQICMM==========P2============ . I believe this was created from a query. How to find the query corresponding to this report ? I need to change the logic for certain columns of the report. How to know if this was created from SQVI or SQ01 or any other transaction.
THanks.

Found it..Query name is P2. It was in a different query area..Standard area and not custom area where I was initially looking at.
Edited by: Shareen Hegde on Aug 22, 2008 5:14 PM

How to change the default sql servery query name?

Whenever we click on new query button, Sql server automatically opens a new query with default name SQLQuery1.sql.
Can I change this default name? What I mean to say is I have to work with quite a number of databases on different servers. So I open multiple queries on different server. So I was finding a way where whenever I click on
New Query button it inherits servername or database name (e.g If I have database name like ABCD new query name should look like ABCDquery.sql ?)
So that I can distinguish which query belong to which Database?
I would be very greateful if you can please answer this.
Many thanks

Please try with different color code option for your servers:
Ref: http://technet.microsoft.com/en-us/library/hh213617.aspx
Set the Status Color for a Server in Object Explorer
To set a server status color in Object Explorer
In Object Explorer, select the Connect button and then select Database
Engine….
On the Connect to Server dialog, select Options >>.
Select the Use custom color check box.
To select the color, select the Select… button.
Select either a basic or custom color, then select OK.
Fill in the rest of the connection information, and then select the Connect button.
Note: This is to identify different server connected not for databases.

In ST03 , how can i see the Query name, user id,how many times executed the

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,

Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

Query Name in Excel Sheet tab

Hi Friends,
Instead of display Sheet 1 in the Excel sheet tab(Bex), is there a way we can display Query Name in the excel sheet tab? please let me know.
Thanks,
KK

Hi Kumar
Can you please share how it was solved ?
Ashish

POWL 'Query Name is already open in another session'

Hi there,
Our users are constantly getting the following error message when using POWL's in the Portal.
Query <Name> is already open in another session' (POWL 016)
The error occurs when a user tries to refresh a query and the query is locked in another session (ENQUEUE_EPOWL_QUERY_EDIT Exception foreign_lock).
There are various root causes to why this error happens, system, application, communication etc. The one I am seeking help on occurs when the user abruptly terminates the browser session (forced or unforced) and the orphaned session is unable to close properly leaving the POWL query locked.
We are currently informing the users to
1.) close all windows and reload the worklist.
and in certain circumstances
2.) log off and log on again
The above workaround doesnt always solve the problem. We are reluctant to give users access to SM12.
Has anybody encountered something similar, if so were their specific settings, notes, code etc. which needed to be implemented?
Cheers
John P

Try the following steps
Please implement the note 1836401 and the prerequisites 1873487,1902580 .
Identify the POWL Query name and set the refresh type as: 'refresh on every LIST VISIT'.
Important: Run the report POWL_D01 and remove the result list of your POWL
Application ID, it#s very important because the cache would still contain the old refresh type and will not recognize the new refresh type, please run the report at first for one user ant test the behaviour, if it works run it for all other user
Pass the application parameter REFRESHA with value X to your POWL application. After that retest your issue, it should work. if not implement the note 1975395 and its prerequisites and test again
Best regards,
Robert.

How to find out query name using Elements of the query builder.

Hi SDNers,
how to find out query name using Elements of the query .
thanks,
satyaa

Hi,
For having a look at the relation between BEx tables,check the link below:
http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
-Vikram

Query names in transports

Similar Messages

Maybe you are looking for