Query not converted in to change mode

Hi all
i have an issue
i have created a query in bex in development system and saved the query, at the time of saving the query it didn't ask
any request but it saved in favorites on save window.
second time i try to open the query it opened but i try to change it in to display mode it's not changed it's give error like no request is applicable to the query.
I created one request in rsa1 transport connection
rsa1->TR->query element->object type
i collected the query and click the bex truck buuton.
it asked me the package name and description and project name, i have given all the detailes .
finally it created one request.
But my problem is not solved the query is not changed in to display mode.
can some one help me is it right process and can some one explain about grouping, display and install options.
these are necessary options or not.
please help me sir
bhaskara
Edited by: bhaska on Aug 27, 2011 4:28 PM

> i have created a query in bex in development system and saved the query, at the time of saving the query it didn't ask
> any request but it saved in favorites on save window.
There were an open request for the query , those change been made as another task to the existing Request.
> second time i try to open the query it opened but i try to change it in to display mode it's not changed it's give error like no request is applicable to the query.
Either this request been released or moved to production or Quality
> I created one request in rsa1 transport connection
> rsa1->TR->query element->object type
> i collected the query and click the bex truck buuton.
> it asked me the package name and description and project name, i have given all the detailes .
> finally it created one request.
> But my problem is not solved the query is not changed in to display mode.
> can some one help me is it right process and can some one explain about grouping, display and install options.
> these are necessary options or not.
> please help me sir
> bhaskara
go to RSA1 Transport Connection
On top of window there is truck button as BEX
Create Request Assign
Close Bex Designer and try to reopen
Open Query
Hope it will be in change mode.
----Thanks
BVR
Edited by: binu v. rajan on Aug 29, 2011 12:12 PM

Similar Messages

Service entry sheet release flag is not appearing in the change mode.

Hi,
In Service entry sheet release flag is not appearing in the change mode(ML81N). though release strategy is exsists in the header level.
note:
1.No changes done release setting, classes, or any other parameter.
2.Last day Few service entry sheets have been released by user .
3.And also i tried with different user , whereas he is geeting release flag, but concern user is not getting?
wht could be reasons?
Please provide suitable solution.
regards,
kumar.

Issue here is user is having authorization issue. Please run ML81N and execute /NSU53 report.
Also execute ML81n and then /NSU53 report for the other user whos does not have this problem. Then send both the reports to Security team asking them to add the missing object in the user's role who has the problem.
Hope this helps.
Ganesh

Delivery Output Type not updated automatically in change mode

Hello,
I am dealing with a strange problem.
If i open delivery to change using VL02N then, output type configured for reissue is updated properly and on save ouput type is getting successfully processed also.
Now if i open VL03N and then using change mode button on application toolbar i go to change of delivery, then output type is not getting created. The issue was figured out when i tried to open delivery from shipment and then using change button i tried to change and save delivery....
Expectiing solution from experts.
Thanks
Hari

Hi,
May be this behaviour is due to the application in which you are opening the delivery. When you open the delivery from shipment, check the transaction code in the screen in system status. If it is VL03N, then it is correct. But if it is VT03N, then it is expected that even in change mode, the output is not triggered. Pls check this once.
I tried the same thing in an invoice from where i opened a SO and then went in change mode, and the otuput is getting retriggered.
I hope teh configuration of your output is correct. Ensure that the Multiple Issuing button is ticked on, if you want yoru output type is to be triggered everytime you go in change mode.

ABAP Query - Not showing the required changes through Z T.Code

Hi,
I have a ABAP Query for OPEN DELIVERY QUANTITY (T.Code - ZABC). I change something in QUERY and activate. After that i execute it, and saw required changes.
But when i execute it with the T.Code - ZABC, it does not show the changes. Even i Save and Test with the SQ01 t.code.
Please tell me, what is the problem in it. Why not showing the required changes through T.Code - ZABC.
Regards...

HI,
Dear, it seems that you have changed the query in SQ02 and then just save it and not generated.
or may be after generation again clicked on SAVE button.
So untill unless you will not generate the query, it won't work.
Secondly, by chanegs in the query, i don't think it changes the name of the main program.
Regds,
Anil

Add new rows when query not input-ready

In the Web Application Designer, is it possible to detect whether a query is in display or change mode, and depending on the outcome to set an Analysis Item parameter ? This would provide a solution to the following:
Background: I have a Web template used for sales quantity planning which contains two Analysis Items, each with their own input-ready query: ANALYSIS_ITEM_EXISTING allows users to enter plan values based on existing characteristic combinations, ANALYSIS_ITEM_NEW_ROWS allows users to enter new characteristic combinations and their plan values (using the 'Number of New Lines' parameter). These two separate Analysis Items are needed so that I can restrict the characteristic values differently for each. ANALYSIS_ITEM_NEW_ROWS shows only new rows, since I have set both parameters 'Number of New Lines' and 'Data Row to' to 5.
Problem: If the query underlying ANALYSIS_ITEM_NEW_ROWS is not able to go into change mode (such as when there is an active data slice, or a locking conflict), then instead of seeing 5 empty rows the user sees existing data from the underlying query. This looks bad and is confusing for the user.
Can anyone think of a solution?

Hi Jacky,
The Bex analyzer works in the same way as in the web. You've restrict all charateristics which are not in your rows or columns to a single value. Then you can see that in excel the last blank row has a black border. If this is the case you can add a new row.
By pressing F4 in an empty cell you can select values or if you've know the key you can type it directly. Also you can add multiple rows at once. IP collects all rows below the query.
If this not works, just put all chars from your aggr. level in the rows and check if this works. And then for each change to the restriction/layout run the query and look if you can still add new rows.
Hope it helps.
Regards,
J.

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

How to - only display the price of approved PO (not change mode)

Hi,
Following are our PO release strategy
1. Release id : P has
a. Released indicator (tick)
b. Changeablity - 4
The above setup is working fine, means still after the approval users can change all the fields. New strategy is triggered once the values are changed.
Now the issue is business owner does not want the price, qty in change mode after approval. After approval ME22N to show
1. Price & qty to be in display mode
2. All other fields (except the one which affects PRICE) in change mode.
I tried to all the combinations, but after approval I get to see either all the fields in display mode or all in change mode.
Is it possible to display the price related fields only for the approved PO in ME22N.
Please advice
Thanks,
Raj.

Hi Mani,
Thanks for the fast reply.
1. There is no ME22N - Fsel Key available.
2. Only for the approved PO - we want the price fields in display mode.
3. There is no restriction required for the un approved POs.
Is there any way.
Please reply
Thanks
Raj.

Purchase order reprints when entering header note in change mode

Hi All,
We want to use header note in PO as a worklog. PO should not print when a note is entered but whenever we enter any text in the header note in PO change mode, a change output gets triggered and the PO is getting printed. How can we avoid this?
Thanks
Deepthi

Hi Peter,
Thank you for the reply
We do have an entry for object EKKO, Text ID F02 for standard document type in operation 1 and 2. Do I have to remove an entry for operation 2 here?. If I remove it, Will it cause problem to other header texts i.e I do not want the PO print only when the header note have some changes. But it should print if any other header text is changed.
Thanks
Deepthi

Why Payment Guarantee procedure is not appearing in change mode

Hi All,
I am displaying the customer master. The payment guar field is appearing in customer master. But when I go to change mode for the customer master, the payment guar field disappears.
Can somebody throw some light on this.
Note: Pls donot send the configuration details. I have already done the configuration and double checked on the same.
Kind Regards
Chakradhar

Hi Utpal,
Hmm.. this is rather strange. Are you sure it is not entering the SP? Can you try to cancel all operations by changing your SP (make a backup first) to:
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 9999
select @error_message = N'My test error'
-- ADD YOUR CODE HERE
-- Select the return values
select @error, @error_message
Then try to update your document. It should stop you if it is entering. If not then I'd recommend going to SAP support.
Also, if possible, post the code you are using in your SP.
Best regards,
Pedro Magueija

How to call structure in query change mode

Hi Gurus,
How to call created structure in query change mode?
Is there any other methods?
Thanks in advance
Ramu

HI Ramu,
If ur structure is global then it will be available in the left panel in the structure tree, Just drag and drop into the rowns or colums. Make sure that the structure is saved as global.
Thanks
Khaja

Is it possible to set a "query in change mode" with the Report Designer 7.x

Hi,
I have a query set in "change mode" with an index set as "data can be changed using user entries or planning funcionts".
If I use this query as a "Data Provider" in the Report Designer, the result is still in "change mode" or a result of the Report Designer is only a static image?
Thank's,
Valentina.

Hi Deepu,
I had suspected this...
Thank you very much!
Regards,
Valentina.

OSTC Query Not Showing Correct Percent If Component is Changed

Hello gurus and experts...here is an interesting question:
Question: Why does a query not report proper Sales Tax Code percentage from OSTC table when a component is updated?
Sales Tax Code (STC) of CA-37B, with a rate of 10.25% is made up of three parts:
California (CA) State Tax Jurisdiction of "CA" with a rate of 7.00%,
County Tax Jurisdiction of "CA-37" at a rate of 1.75%,
City Tax Jurisdiction of "CA-37B" with a rate of 1.50%, and the effective date is set at 31 Dec 2008 (in the past).
When the City Tax Jurisdiction is changed to 1.00% and date of 31 Dec 2009, the OSTC of CA-37B should be 9.75%.
However, when a query is run on the OSTC table it strangely reports the old 10.25% (on the Sales Tax Code window it shows correctly as 9.75%).
Here is the query - very simple...as about as simple as it gets...
SELECT
T0.Code,
T0.Name,
T0.Rate AS 'Total Tax Percentage',
T0.Freight AS 'Freight Taxable?'
FROM OSTC T0
ORDER BY T0.Code
IF we go back to the Sales Tax Code Window and change anything (description, one of the components, etc) and hit the update button, then the query reports the correct percentage.
Am I missing something here? I would imagine that the system must be doing something and I cannot believe the workaround is just go back and update something in the Sales Tax Code window - there are a ton of updates to do with taxes each year! Trying to remember which component was updated can cause real confusion. SAP B1 does a ton of automatic updates all over the system - why would it just be this area of information in OSTC???
Thanks for reading the post, and many more thanks for your help and suggestions - Zal

OK - Question Answered - had nothing to do with the query - user did not hit "Update" two times when doing the City Tax Jurisdiction Update...
I knew SAP would be doing an auto update - has to!!!
Thanks all - Zal

Not coming to change mode

hi all,
in that IDOC extension program(customer) user exit for extension it is not coming to change mode in my IDES version.It shows the warning message 'This include program is for user_exit only'.
Rgs,
Venkat.

Once after you get the warning message then click on ENTER key and proceed to create that include and write your logic.
It will accept.
Thanks,
Srinivas

Not able to view release strategy tab in pr(change mode)

Hi,
i have created a pr at DEV and i am not able to view release strategy tab in change mode at DEV. please help???

Hi,
Please check if you activated the user exit EXIT_SAPLEBND_004
(Include ZXM06U31) This exit is relevant for the overall release.
If you activating the userexit, please ensure that you implement
the coding line E_CEBAN = I_CEBAN. in the include
. Please refer to point 3) of the attached note 365604.
BR
Nadia Orlandi

Query not converted in to change mode

Similar Messages

Maybe you are looking for