Query Not reflected with Updated Data

Dear Experts,
I am facing a Problem in query data updation. Data has been daily updating in infoprovider successfully ,But when user run query through Bex he is always shown old data. Then I go to RSRT and generate the query and data got updated.
Every Time for new data updation I need to Generate the query.
What could be reason for this. Is this related to cache data ?
Any Advise .
Thanks in Advance.

Dear Michael,
This problem is coming only for one Multiprovider. Running this program would affect all other queries also . This will Delay the reporting.
Any other reason why query is reflected with old data Though infoprovide is loaded with new data.

Similar Messages

Report doest get refreshed with updated data

Hi All,
I am facing a strange problem, where my report doest get refreshed with updated data when it’s called second time.
1.     Screen1 – Preview option – Preview Screen
2.     Preview Screen – Print option (Button) – Report generated and displayed in the IE Browser window with a dynamically generated PIN (Query written in WHEN-BUTTON-PRESSED trigger)
3.     Screen2 is displayed in the backend
4.     Screen2 – Cancel option – Screen1
5.     Screen1 – Preview option – Preview Screen
6.     Preview Screen – Print option (Button) – Report generated and displayed in the IE Browser window with a same PIN as in step2. Actually here the Query written in WHEN-BUTTON-PRESSED trigger generates a new PIN.
7.     When checked in the backend this new PIN is updated, but the same is not displayed on the Report. That means to say that report is not refreshed. When I click on the refresh button in the IE Browser window explicitly, the report is refreshed and displays the PIN as found in the backend.
What I expect is that the report should get refreshed automatically with a new PIN, when I choose Print option in Preview Screen.
Can anybody help me in overcoming this challenge?
Regards,
SAM

Hi All,
What i did was i encoded the PIN and sent it as a paramter to call the report.
In the report i decoded the PIN and printed it. This way my URL to call the report was always updated with the decoded PIN value and would refresh the page successfully, everytime its called.
Regards,
SAM

Non-cumulative initialization is not possible with historical data

Hi all,
While loading inventory cube.. 0IC_C03 .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
<b>Non-cumulative initialization is not possible with historical data</b>
Regards
siva.

You sure you didn't use BF instead of BX? This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time... Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.

RFC does not get the updated data

Hi Experts,
I am not getting the updated data via RFCs.
The scenario is like this.
Step 1: I open the Application running on System "B".
Step 2: I add a record in second Application which is on system "A".
Now I want the same data to be reflected on Application running on System "B" on some event.
I observed the data is never reflected in Application running on System "B", but when I refresh the page of this Application, I get the updatred data. Do you have any clues why this is happening.
Best Regards,
Arti.

Hi,
Can you be bit more clear about the requirement. It is logical that without refresh updated data wont be shown.
Thanks,
Vinod.

How to Keep Content Types Current with Updated Data

Let’s say that I have four content types—content type 1, content type 2, content type 3, and content type 4—all based on the same list, say list A.
Each content type has its own workflow.
When the workflow for content type 1 is completed, the data is saved to an individual item, say item Z, in a separate list, list B.
When the workflow for content type 2 is completed, the data is saved to the same item (item Z) in list B. The reason that there are two lists is that the creation of content types causes new items to be created, but the each
new item must reference data from the previous item. That means that data has to be copied from the first item to the second item. But what happens to the data in the second item when data from the first item is changed? The solution is to have a single item
in another list to which all content types write their data.
What I need to know is how can all the content types retrieve data from list B when those content types are based on list A? For example, let's say that content type 3 uses data originally input through content type 1. As the
user inputs and saves data through content type 3 he sees data that had been originally input through content type 1. Another user then accesses content type 1 to update and save data through it. When content type 3 is opened again that user will not see the
updated data entered through content type 1 because it is tied to a different item. The solution seems to be for all content types to save their data to the same item in another list. But then how can those content types be designed so that when they open
they show updated data from List B when those content types are based on List A?
Other applications have the notion of a folder containing all the up-to-date data fields. Another way to look at this problem is to state what SharePoint 2007 does to mimic the notion of a folder.

Thanks for responding, but I don't think that the solution provided solves my problem. What you described will keep the item in List B in sync with the changes made to List A. However, the content types from List A will not be in sync when they are opened
from List A. Say content type 1 makes changes to various fields. When content type 3 opens it displays some of the fields that content type 1 changed; however, content type 3 and content type 1 by definition display different items--and those items are not
in sync. Either I have to copy the updated item from List B back to the related items in List A or there has to be another solution.
Is it possible to have a workflow update all the items in a list based on a key field whenever changes are made to that item. Say content types 1, 2, 3, and 4 already exist and each refers to a different item in List A, but they are "tied" together
by a key field. When content type 1 is reopened and changes are made, is it possible to iterate over the items in a list to find other items whose key field matches the key field from content type 1? If so, then when matching items are found the fields in
them can be updated by the same changes made to content type 1.
If this latter scenario is possible, how is that iteration set up in a SharePoint 2007 workflow? Thanks again.

Posting complete retirement not poss.with value date

Hello,
The error is coming as "Posting complete retirement not poss.with value date" when i am executing ABUMN. I am providing the asset value date same as the old assets Capitalisation date.The output comes as:
Diagnosis
Transactions have been posted to asset 900035 0 with an asset value date or posting date later than the retirement date 15.06.2009.
I have tried with later date but same result.
JK

Hello Paul,
I am not retiring the asset. I am just transferring the old asset class to a new asset class. Like: 100001 was created wrongly under 1020 class. Now we have created 500005 asset under 1040 class which is a correct class. Now I am transferring from 100001 to 500005 with the transaction code ABUMN. I am providing the same capitalisation date as of 100001 in asset value date in ABUMN.
Hope you understand.
JK

AA318 Posting complete retirement not poss.with value date...

Hi, please I need your help...
I get this error:
Posting complete retirement not poss.with value date 31.12.2011
Message no. AA318
I have an asset that has values in the year 2012, but I reversed all of them. It´s necessary to transfer the asset to a new asset with ABUMN dated 31.11.2012. How can I solve this?
Thnaks for your colaboration!

Hi,
Thanks, but my sap version is 6.0 and the release of that note is valid to 470. Do you have any other idea?
Thanks for you colaboration!

Chart size does not extend with the data

Hi,
One of my reports has a horizontal bar and the chart size does not grow with the data. The chart displays fine if I have minimal amount of data. If the data grows, the display is bizarre, it's just messed up. Is there an option I need to set? Please provide your inputs.
Thanks
Arch

Hi,
I tried with all these options, but no success. I remember I used to get full visible charts initially. Not sure what has happened charts are getting chopped off by at least 50px right and bottom. Interestingly When I export the chart to Excel it looks perfect.
Any suggestion. Has anyone faced this issues. I am using 11.1.1.5 version.

Hierarchies Job Failing The job process could not communicate with the dat

Hi Experts,
We have a group of hierarchies that run as a separate job on the DS schedules. The problem is this when we schedule the job to run during the production loads it fails but when we run immediately after it fails it runs completely fine. So it basically means that if i run it manually it runs but when its scheduled to run with the production job it fails. Now the interesting thing is If i schedule the job to run anytime after or before the production jobs are done. It works fine.
The error i get is
The job process could not communicate with the data flow <XXXXXX> process. For details, see previously logged
                                                           error <50406>.
Now this XXXXX DF has only Horizontal Flatenning and it does not run as separate process because if i have it has separate process it fails with an EOF . So i removed the run as separate process and changes the DF to use in memory .
Any Suggestion on this problem...

Thanks Mike.. I was hoping its a memory issue but the thing i don't understand is when the job is scheduled to run with the production job it fails. when i manually run the job during the production job it runs, this kinda baffles me.
DS 3.2 (Verison 12.2.0.0)
OS: GNU/LINUX
DF Cache Setting :- In Memory
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
Thanks for your help

While deleting sms in a row one one ios 7 hang up and restart. This is happening in my iphone 4. Ps help. Not happy with update, it is extremely slow. Would request apple to provide an option of restoring it back to ios 6

While deleting sms in a row one one ios 7 hang up and restart. This is happening in my iphone 4. Ps help. Not happy with update, it is extremely slow. Would request apple to provide an option of restoring it back to ios 6

I'm having same problem with my iPhone 4. Even after restoring twice. Simple tasks casue the phone to lock up and restart, which, thanks to iOS 7 takes much longer than with iOS 6.
I love my phone, but it is almost unsuable after update.

Tree table is not reflecting the updated model data changes at the front end

I have two tables ,
1) Provider table(tree table) 2)member table
I have implemented drag and drop functionality using jQuery UI on both tables.
In my scenario when I drag a member from the member table and drop it on the Provider table and also when I delete an assigned member from the provider table I will update the data fetched from odata model and again I will call the method which binds the data to the provider table so that the table will reflect the changes.
here is the code,
on drop:
$("#Provider tbody tr").droppable({
drop: function(event){
oController.AssignMember(oProviderId, oMemberId)
}).disableSelection();
Assign member function: here am updating the model.
AssignMember : function(oProviderId, oMemberId){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var oParameters = {};
oParameters.PROVIDER_ID = oProviderId;
oParameters.MEMBER_ID = oMemberId;
oParameters.CREATED_ON = new Date();
oModel.setHeaders({"content-type" : "application/json;charset=utf-8"});
oModel.create( "/PROVIDERMEMBERS", oParameters, null, function() {
var oController = sap.ui.controller("adsm.provider.member_assignment_view");
oController.GetProviderData();
},function(jqXHR) {
var errorMessage = jqXHR.response.body;
var jsondata = JSON.parse(errorMessage);
sap.ui.commons.MessageBox.alert(jsondata.error.message.value);
GetProviderData function: here i bind the data to the table
GetProviderData: function(){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var Context = "/PROVIDERS?expand=ASSIGNEDMEMBERS&$select=NAME,ID,ASSIGNEDMEMBERS/NAME,ASSIGNEDMEMBERS/ID,ASSIGNEDMEMBERS/PROVIDER_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
var outputJson = {};
var p = 0;
var r = {};
if (oEventdata) {
r = oEventdata;
try {
if (oEventdata.d){
r = oEventdata.d;
} catch(e){
//alert('oEventdata.d failed');
try {
if (oEventdata.d.results){
r = oEventdata.d.results;
} catch(e){
//alert('oEventdata.d.results failed');
try {
if (oEventdata.results){
r = oEventdata.results;
} catch(e){
//alert('oEventdata.results failed');
$.each(r, function(i, j) {
outputJson[p] = {};
outputJson[p]["NAME"] = j.NAME;
outputJson[p]["ID"] = j.ID;
outputJson[p]["PROVIDER_ID"] = j.ID;
outputJson[p]["DELETE"] = 0;
var m = 0;
if (j.ASSIGNEDMEMBERS.results.length > 0) {
$.each(j.ASSIGNEDMEMBERS.results, function(a,b) {
outputJson[p][m] = { NAME: b.NAME,
ID : b.ID,
PROVIDER_ID: b.PROVIDER_ID,
DELETE: 1};
m++;
p++;
var oModel = new sap.ui.model.json.JSONModel();
oModel.setData(outputJson);
oTable.setModel(oModel);
function onError(oEvent){
console.log("Error on Provider Members");
oTable.bindRows({
path:"/"
Its working fine in chrome but in IE the model data gets updated but the table is not reflecting the changes at front end.Can anyone suggest me a possible solution to fix this?
Please have a look at the attached screen shots.
Best regards,
Amala Suganya.

Hi Amala,
I think this will help you:
Disabling Cache for CRUD/FI OData scenarios for a UI5 Application on Internet Explorer
Kind regards,
RW

Spry Data Set will not Refresh with New Data?

I'm using the Dreamweaver CS4 "Spry Data Set" Wizard and created the following layout on one of my pages:
In the wizard, under "Specify a Data Source", I chose "HTML", and selected my cfm page that has a simple Table with the datasource below:
<cfparam name="URL.id_com" default="1">
<cfquery name="rsTickets" datasource="Ctickets">
SELECT ticketNum, ticketType, ticketDate, acctNum, firstName, lastName, businessName, city, status, owner, ticketDetails
FROM tickets
WHERE acctNum = <cfqueryparam value="#URL.id_com#" cfsqltype="cf_sql_numeric">
</cfquery>
When I display the page in IE8, The Spry Master/Detail page will not filter my records based on the URL parameter?
(Note: All my other "Non-Spry" datasets filter fine by the URL)
Question: How do I make the Spry data "Refresh" or "Re-run the query" so the data filters properly?
Thanks,
jlig

Ben, Thanks for the reply..
Here is my Source Data page which I created & selected in the Spry Data Wizard: http://cerberus.clearwave.com/jerry/Spry2.jpg
(this page takes my query, filtered by the URL Acct field and makes a simple table to feed the Spry Wizard)
- In the Spry Data Wizard, I selected the file and it properly found the table data: http://cerberus.clearwave.com/jerry/Spry3.jpg
- Then I clicked Next and changed a few of the field types: http://cerberus.clearwave.com/jerry/Spry4.jpg
- Next I chose Master-Detail and used the Acct field to be the Master : http://cerberus.clearwave.com/jerry/Spry5.jpg
- Lastly, I open up the webpage, click on the Tickets Spry Tab: http://cerberus.clearwave.com/jerry/Spry6.jpg
As you can see in the picture on this page: http://cerberus.clearwave.com/jerry/Spry6.jpg, the URL parameter is = 3902 which is the Acct number
being passed from the previous page in my application. (Ex..http://192.168.1.77/COE/salespipeline_mi.cfm?id_com=3902)
The first one is correct, but once I move to a different Acct number the Spry data will not update to reflect the correct Tickets?
Once I move to say, Acct 4413, the Spry Tickets Tab does not change or update to reflect this Acct's tickets?
(see link--> http://cerberus.clearwave.com/jerry/Spry7.jpg)
Here is my code listing for the Tabbed Webpage: http://cerberus.clearwave.com/jerry/Spry8.txt (see images 6 & 7)
It seems like I'm missing some kind of "Trigger" or "Requery" or "Refresh" that "Re-runs" the Source Data page (http://cerberus.clearwave.com/jerry/Spry2.jpg)..?
Thanks again,
jlig

LOV in Picklist is not reflected with Value Set maintained.

Value set A is contained the latest/updated list of Responsibility Center. Wheres one of the Picklist in Employee Self Service(OTL) which showing the lists of Responsiblity Center which query/calling the values maintained in Value Set A. However, the list of values does not contain the latest information which being maintained in Value Set A. On the other hand, when query from backend table for the Picklist function, the updated value in Value Set A is there.
Additional Infomation: Apache and application was bounced but the result still the same.
Please advice. Thanks.

Hi Hussien,
For your information, it is Release 12.1.1, db version is 10.2.0.4 and platform version is Oracle Solaris on SPARC (32-bit).
The article that you have provided does not applicable. This is only happen to the Cost Center LOV in the picklist which does not reflected even there is no end date in Value Set maintained.
Please advice. Thanks.
Regards,
CF

Organiser of calendar invite is not seeing the updated date & time of a meeting they rescheduled.

A user organised a meeting and sent it to 3 recipients. All 3 recipients responded to the meeting invitation. This invitation appeared in all four calendars. The organiser then dragged the meeting invite to another day, thus changing both the date and time.
As part of this action the organiser accepted ‘save changes and send update’. The organiser received responses to the new meeting time. The meeting appears in all 3 original recipients calendars. However, the new date and time is not visible in the organisers
calendar. This calendar still reflects the original date and time – nothing has changed.
Background: the client is running Outlook 2010 (14.0.6023.100). Exchange 2007 RU 15.
On the organisers Outlook profile I can see two items in the sent items folder. One for the original meeting invite and one for the second updated meeting invite. The option to accept the meeting invite is greyed out for the organiser as expected. If I drag
the second meeting invite (with the new date and time) to organisers calendar, with the intention of adding this to their calendar, I am prompted that ‘…as meeting organiser, you do not need to respond to the meeting…’.
There are no errors reported in the synchronisation folder.
The same experience is visible in OWA.
Any ideas?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Not able to update data in iterator

Our scenario is something like this:
We do not directly bind UI components to VO, that is, for example we do not directly drag and drop a VO as a table. Instead we use POJO to exchange data between the UI and model layers.
Our requirement is to show form with pagination. If there are 5 records we show each record in form layout with navigation keys to show next, previous, first and lat records.
Since we do not bind the data directly to VO, the form data is coming from pojo. Our implementation is as below
A java class named personPojo with fields
fname
lname
code
A method getAllPersons which queries all the person records from db table, populates it in a list<personPojo> and returns this list.
We are using an iterator which is based on this List<personPojo> that is returned from the method. Inside this iterator we have a panelFormLlayout with input components mapped to the pojo fields as below
<af:iterator value="sampleBackingBean.getAllPersons" var="row"
               id="i4">
          <af:inputText value="#{row.fname}" id="it6">
<af:inputText value="#{row.lname}" id="it7">
<af:inputText value="#{row.code}" id="it8">
     </af:iterator>
The problem we are facing is, when we update the fields in the form, the data is not getting stored in the field of the pojo. That is, if currently 3rd record/element is shown from the list and we update name to "John". Then click on next button to go to next record and update name to "Smith". Now on clicking previous, we should be able to see the name "John", instead in our case no data is shown. But, if we hard code the data in the list, then the list shows the data properly. The issue is when we update it does not show the updated value as it is not getting set in the pojo. We have made sure the pagination works fine, that is clicking next or previous is correctly showing the records
Can you please let us know what we may be missing here or if you have any other suggestions to implement a form with pagination

hi,
Hope following useful
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e12419/tagdoc/af_iterator.html
http://blogs.oracle.com/shay/entry/working_with_the_afiterator_co

Query Not reflected with Updated Data

Similar Messages

Maybe you are looking for