Query not refreshed when workbook is broadcasted.

Dear All,
I have an issue in a very critical workbook. It fetches data from around 14 diff queries. there are three variables to as inputs required for this workbook. The setting is set to refresh all qureies when wb is open. So when i execute the wb, it first asks the first variable and refreshes all relevant quereies and then the second and third .. Now when i am broadcasting this workbook in BI 7.00, in the workbook pre-cal setting-> variable assignment , all three variables are appearing and so i am giving the variable values there. but when i have executed the setting, and checked the workbook, only queries related to first variable have been refreshed.
Let me know if any other setting needs to be changed.
Thanks
Naisha

Hello,
There is a recently bug which Precalculation does not precalculate/refresh some queries.
Please, review note  * 1476546 - PrecalculationServer: wrong data is calculated/broadcasted
Unfortunately there is no solution yet.
The correction will be delivered on next Precalculation Server SP, on CW 33.
Best regards,
Edward John

Similar Messages

  • Error when executing the query or refreshing the workbook

    Hi All,
    Whenever I am trying to execute a query or refresh a workbook a error message is poping up saying that
    Error: <internal error> Problem when writing table: E_T_cel.
    I face this error in few of the queries and when i refresh workbooks. These queries have lot of calculations and filters and they sum up lot of records.
    Any help greatly appreciated.
    Thanks
    Raj.

    Hi Maik,
    Thanks for reply, I went into tran sm21 but i could not understand the messages there. Below is the list of messages in sm21
                         System Log: Local Analysis of cdsap9d                    1                                                    
    From date/time............. 04/20/2005 / 10:00:00
    To date/time............... 04/21/2005 /        
    User....................... KADALPR    
    Transaction code...........                    
    Terminal...................        
    Task.......................  
    Problem class..............           
    Further restrictions.......                                                                               
    Sorted ? ................ SOFI
    Pages with single entries 00000100
    With statistics............ 
                         System Log: Local Analysis of cdsap9d                    2                                                    
    Time     Ty. Nr Cl. Tcod MNo Text                                                                                Date : 20.04.05 
    12:58:10 DIA  0 100      R49 Communication error, CPIC return code 019, SAP return code 728                                                 
    12:58:10 DIA  0 100      R5A > Conversation ID: 29858195                                                                               
    12:58:10 DIA  0 100      R64 > CPI-C function: CMSEND(SAP)                                                                               
    12:58:10 DIA  0 100      R68 Perform rollback                                                                               
    12:58:10 DIA  0 100      R47 Delete session 001 after error 003                                                                             
    23:54:49 DIA  1 100      R49 Communication error, CPIC return code 019, SAP return code 728                                                 
    23:54:49 DIA  1 100      R5A > Conversation ID: 44959947                                                                               
    23:54:49 DIA  1 100      R64 > CPI-C function: CMSEND(SAP)                                                                               
    System Log: Local Analysis of cdsap9d                    3                                                    
    Time     Ty. Nr Cl. Tcod MNo Text                                                                                Date : 21.04.05 
    09:32:50 DIA  2 100      R49 Communication error, CPIC return code 019, SAP return code 728                                                 
    09:32:50 DIA  2 100      R5A > Conversation ID: 83536783                                                                               
    09:32:50 DIA  2 100      R64 > CPI-C function: CMSEND(SAP)                                                                               
    Reading:  
    Number of records read.........       2777
    Number of records selected.....         11
    Old records skipped............       2733
    Records of invalid users skippe         33
    Further selection:  
    Number of records read.........         11
    Number of records selected.....         11
    Number of records printed......         11
    End of system log
                         System Log: Local Analysis of cdsap9d                    4                                                    
                        C o n t e n t s                              
    Contents              Page              Start            End  
    Selection criteria     1
                           2        20.04.2005  12:58:10 - 23:54:49
                           3        21.04.2005  09:32:50 - 09:32:50
    Contents               4
    End of program  -
    If you can help me out as where to look at these messages then it great.
    Thanks,
    Raj.

  • Image does not refresh when I undo

    This seems only to happen when using my Wacom. A lot of friends have the same problem.
    The viewport/canvas does not refresh when undoing a paint stroke done with my Wacom Intuos4 Wireless. But when I make a new paint stroke or zoom in or something else that requires the viewport to refresh it looks correct. I am using Photoshop CS5.1 (Production Premium CS5.5). I am running Mac OS X Lion on a MacBook Pro 13" 2011.
    Anyone else having this issue? It seems like a nasty bug to me.

    OK, I have done some testing and this happens on three friends computers. What we have in common is Wacom Tablets (different kinds, intous3, intuos4, bamboo and intuos4wl), Photoshop CS5.5, OS X Lion and Macbook 13" 2011.
    However, another friend just bought a new intuos4wl for his Macbook Pro 15" late 2008 (MacBook Pro5,1) thats running Snow Leopard. So far this seems to only happen with wacoms + cs5.5 + lion. And another friend is running CS5 on a MacBook Pro 13" 2011 without problems.
    I would say that the problem is PS CS5.1 in conjunction with Lion and Wacom tablets. Scratch what I said earlier about external monitors.

  • Exchange 2010 SP3 - RU3 RU4 Public Folders issues ( not refreshing ) when grouping by Categories for "(None)" Group

    After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
    Thx

    Hi,
    From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
    As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
    grouping by flag.
    Should you need more assistance, feel free to tell me.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Macro not refreshing in workbook with SP 14

    Hi Gurus,
    We have developed worbooks which uses macros to transform data from query to the report sheet. After installing SP front end 14, the macro's are not getting refreshed when the workbook opens., This was fine untill SP 13. Pl let me know if anyone is encountering this issue.
    Just a note my macro code gets called from CallBack subroutine.
    Thanks

    Hi Syed,
    I got the same problem with Frontend Patch 15 here. It allready worked with FEP14. The macro I defined in the workbook properties is not used when you initially open a query. When you do a refresh manually everything works fine.
    Could you solve this problem? If so please let me know how...
    Regards,
    Joerg

  • Report does not refresh when link to page

    I have a report on page 1 with a column link to a report on page 2.
    The link sets items on page 2.
    If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
    If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
    I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
    The items on page 2 are select lists and text (always submit when enter pressed).
    How can I get the report on page 2 to auto refresh without the user having to click the Go button?
    Message was edited by: kgamble
    kgamble

    I can't post the pages (site reasons) but here's the debug.
    All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
    I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
    Any ideas?
    Thanks
    Kathryn
    0.00:
    0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
    0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
    0.02: alter session set nls_language="ENGLISH"
    0.02: alter session set nls_territory="UNITED KINGDOM"
    0.02: NLS: CSV charset=WE8MSWIN1252
    0.02: ...NLS: Set Decimal separator="."
    0.02: ...NLS: Set NLS Group separator=","
    0.02: ...NLS: Set date format="DD-MON-RR"
    0.02: ...Setting session time_zone to dbtimezone
    0.02: NLS: Language=en-gb
    0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
    0.03: ...Supplied session ID can be used
    0.03: ...Application session: 8392008407576157812, user=PENTESTER
    0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
    0.03: Session: Fetch session header information
    0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
    0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
    0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
    0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
    0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
    0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
    0.05: ...Metadata: Fetch page attributes for application 129, page 8
    0.05: Fetch session state from database
    0.05: Branch point: BEFORE_HEADER
    0.05: Fetch application meta data
    0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
    0.06: Clear cache: request=RP
    0.06: ...Resetting pagination for page
    0.06: Clear cache: request=8
    0.06: ...Clearing Cache for Page 8
    0.06: Nulling cache for application "129" page: 8
    0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
    0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
    0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
    0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
    0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
    0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
    0.08: Computation point: BEFORE_HEADER
    0.08: Processing point: BEFORE_HEADER
    0.09: Show page template header
    0.09: Computation point: AFTER_HEADER
    0.09: Processing point: AFTER_HEADER
    0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
    0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
    Home New Complaint
    Existing Data
    Logout |
    Complaints Complainants
    0.14: Region: Complainant Search
    Complainant Search
    0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
    SD Number
    0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
    0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
    NI Number
    0.16: Region: criteria_go
    0.16: Item: P8_GO BUTTON
    0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
    0.17: Region: Complaint Search
    Complaint Search
    The list of complaints must match ALL of these specified search criteria:
    0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
    Start
    0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
    End
    0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
    0.20: Item: P8_TARGET COMBOBOX
    Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
    0.22: Item: P8_RECUR COMBOBOX
    Recurrent? -- All -- YES NO
    0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
    Payments -- Select -- YES NO
    0.23: Item: P8_IDR COMBOBOX
    Type of Complaint -- All -- IDR Other Complaint
    0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
    0.23: Computation point: BEFORE_BOX_BODY
    0.23: Processing point: BEFORE_BOX_BODY
    0.25: Region: Complaints List
    Complaints List
    0.25: show report
    0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
    0.28: determine column headings
    0.28: activate sort
    0.38: parse query as: GENERAL1
    0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
    0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
    0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
    0.39: binding: ":P8_START"="P8_START" value=""
    0.39: binding: ":P8_END"="P8_END" value=""
    0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
    0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
    0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
    0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
    0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
    0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
    0.41: print column headings
    0.41: rows loop: 15 row(s)
    There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
    0.42: Computation point: AFTER_BOX_BODY
    0.42: Processing point: AFTER_BOX_BODY

  • IChart Trend does not refresh when NULL returned

    I have a problem with an iChart displaying a trend. The chart receives data based on a selection from a dropdown box. Everything works fine as long as there is data, the trend updates correctly for the line selected from the dropdown. If, however, you select a line that is down, no current data available, then the iChart continues to display the trend from the last selection. These are based on a query that runs when a new selection is made and a button clicked.
    When the page is first opened the iChart is blank until a selection is made. If the frame is refreshed, it refreshes the iChart to a blank state until a selection is made. What we need it to do is reset it to blank when no data is returned from the query, rather than caching the previous trend.
    Any suggestions greatly appreciated.

    Mark,
    Three dashes (---) and 12/31/1969 dates are an indication that the InitialUpdate has been suppressed for the chart, meaning it doesn't run the query template.  Because the query is time based, but does not actually run the query it has 'null' dates to display for the start and end.
    There is currently no way to use JavaScript to tell the iChart applet to revert back to this state.  Your best alternative may be to run a query that returns no values to display (something that doesn't produce a FatalError, which would lead to the 'No Data Available' message).
    Regards,
    Jeremy

  • Swing problem: table is not refreshed when i open it  from jdialog

    Hi , my situation is this one :
    1. i have a swing form.
    2. i have created a panel form where i have a drop down list and a table. wich are depndend with each other. When i choose an item to the drop down list the value in the table is changed.
    3. i invoke this panel into the form with drag and drop, with invoke jDialog from button option.
    4. First time i run the form and open the panel from button the drop down list and the table are working correctly.
    5. i close the panel and open it again: And at this time when i choose an item from drop down list the table is not refreshed anymore. I have to run the form again if i want that this panel to work correctly.
    Am i doing smth wrong? I dont have too much experience in swing , and the documentation for adf-swign are really poor .
    Ps: Maybe i should explain the way i have created the drop down list and table in the panel . i am not using smth like execute with parameters for the view in the table. I have created a link between the view in the drop down list and the view in the table. It seems they work correcly if i run the panel for the first time.
    Thanks in advance !

    To answer your question, Restore the iPhone with current iTunes on your computer. If fixed, it was software. If still problem, most likely hardware, and then make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

  • QBE style(Find-Execute) Query not executing when VO has bind parameter

    I have an Entity Based ViewObject that is composed of 3 Entities so the entities are related through an Assoc. Then the ViewObject also has a bind paremeter defined and used in the WHERE clause.
    In my page everything is fine until when I use/click on the Find operation on the JSF page. When the Find operation is executed the page/form goes blank so I can enter by QBE query. Now when I Execute my search by executing the ExecuteWith params operation. Nothing is happening to the screen, it seems that query was not executed. Although there was no errors or exceptions displayed.
    However if I remove the bind parameter, and execute the Execute operation instead after going to Find mode, the query is executed properly and I get expected results.
    My problem is a bit general, but are there anyone who had a similar problem like this? Im still in the process of creating a test case.
    regards,
    Anton

    Hi Frank,
    But the "ExecuteWithParams" operation provides the bind variable right? (i had the value hardcoded on the pagedef). So it must have supplied a value. I also noticed that this is happening only when if the VIewObject contains two or more Entities. If the Viewobject has only 1 entity, the ViewObject queries properly.
    Anyway Frank, I had found a fix for this. I set an InvokeAction on the pagedef that binds to the ExecuteWithParams that is invoked during page load only(!postback condition). and then I just use the Find-Execute operations instead of the Find-ExecuteWithParams operations that I used previously.
    I will try to replicate the issue again to investigate what's really going on. I just want to know if its a bug or just an expected behavior or i just made a mistake.
    regards,
    Anton

  • Adobe Captivate 8.1 TOC not refreshing when published

    I have Adobe Captivate v8.1. In my project, which originated in PPTX, the slides are not refreshing in the TOC in Captivate. I have used the 'reset' button in TOC but when I publish, it is not picking up the slide title?
    thanks Lynn

    PowerPoint is not the best about managing slide titles. Unless you created the content in outline mode, or laboriously added titles to each slide in outline mode, you may find that what appears to be a slide title in PowerPoint is not recognized as a slide title by Captivate.
    The good new is, once you add the titles (either in Captivate or in PowerPoint), you should be able to see them in the TOC after refreshing it.
    Just be aware, you'll loose any customization to the TOC contents when you refresh.

  • Splitter Problem - ALV Grid not refreshed when selected another item

    Hi Experts!!
    I have a container on screen 100 which has to be split into 3 areas. Left area ->tree, Right top area -alv grid and bottom also alv grid. I created the program without splitter and it was working fine. After I added this splitter, I see that in ALV grid, the data is not being refreshed. When double clicked on an item in tree struct, ALV grid (CL_SALV_TABLE) to be shown.. Firstly it's fine but when I double click on another item, it's not refreshing the data but is showing the same previous data.
    I have searched existing posts and implemented, but no luck.
    PFB my code:
    * In PBO of screen 100
      CREATE OBJECT go_cc_area1
        EXPORTING
          container_name              = 'CC_AREA1'
        EXCEPTIONS
          cntl_error                  = 1
          cntl_system_error           = 2
          create_error                = 3
          lifetime_error              = 4
          lifetime_dynpro_dynpro_link = 5.
      IF sy-subrc <> 0.
        MESSAGE e025 WITH sy-subrc.
      ENDIF.
      CREATE OBJECT go_splitter
        EXPORTING
          parent        = go_cc_area1
          orientation   = 1              "Vertical split
          sash_position = 40
        EXCEPTIONS
          OTHERS        = 1.
      IF sy-subrc <> 0.
      ENDIF.
      go_container_tree  = go_splitter->top_left_container.
      go_container_2 = go_splitter->bottom_right_container.
      CREATE OBJECT go_splitter_2
        EXPORTING
          parent        = go_container_2
          orientation   = 0              "Horizontal split
          sash_position = 40
        EXCEPTIONS
          OTHERS        = 1.
      IF sy-subrc <> 0.
      ENDIF.
      go_cc_area2 = go_splitter_2->top_left_container.
      go_cc_area3 = go_splitter_2->bottom_right_container.
      CREATE OBJECT go_tree
        EXPORTING
          i_parent                    = go_container_tree
          i_node_selection_mode       = cl_gui_column_tree=>node_sel_mode_single
          i_item_selection            = gc_x
          i_no_html_header            = gc_x
          i_no_toolbar                = space
        EXCEPTIONS
          cntl_error                  = 1
          cntl_system_error           = 2
          create_error                = 3
          lifetime_error              = 4
          illegal_node_selection_mode = 5
          failed                      = 6
          illegal_column_name         = 7.
        CALL METHOD go_tree->set_table_for_first_display
          EXPORTING
            i_background_id = space
            is_layout       = gs_layout
          CHANGING
            it_sort         = gt_sort
            it_outtab       = gt_tree_output
            it_fieldcatalog = gt_fieldcat_tree.
        CALL METHOD go_tree->expand_tree
          EXPORTING
            i_level = 2.
    * End - PBO 100
    *       CLASS lcl_tree_event_receiver DEFINITION
    CLASS lcl_tree_event_receiver DEFINITION.
      PUBLIC SECTION.
        METHODS: handle_item_double_click
                   FOR EVENT item_double_click OF cl_gui_alv_tree_simple
                   IMPORTING fieldname
                             index_outtab
                             grouplevel.
    ENDCLASS.                    "lcl_tree_event_receiver DEFINITION
    *       CLASS lcl_tree_event_receiver IMPLEMENTATION
    CLASS lcl_tree_event_receiver IMPLEMENTATION.
      METHOD handle_item_double_click.
          IF go_alv_area2 IS BOUND.
            go_alv_area2->refresh( ).
          ENDIF.
          cl_salv_table=>factory(
            EXPORTING
              list_display   = space
              r_container    = go_cc_area2
            IMPORTING
              r_salv_table = go_alv_area2
            CHANGING
              t_table      = gt_table ).
          go_alv_area2->display( ).
      ENDMETHOD.                    "handle_item_double_click
    ENDCLASS.                    "lcl_tree_event_receiver IMPLEMENTATION
    I am facing the same problem with area 3 as well. Can somebody please help me out.
    Thanks a lot!!
    Edited by: Srinivas Kalluri on Jan 28, 2012 1:39 PM

    Hi All,
    I am still facing this problem. Can somebody please help me out?
    I created a test program wth sflight and spfli tables. Can somebody look into this and tell me where I am going wrong?
    On screen 100 i have one cust container named CC.
    When I test it, it's showing the same refresh problem. But in this test program refresh is atleast happening once.
    REPORT ztest.
    PARAMETERS: p_carrid TYPE sflight-carrid.
    CLASS lcl_tree_event_receiver DEFINITION DEFERRED.
    CONSTANTS: gc_x VALUE 'X'.
    DATA: go_cc_area1 TYPE REF TO cl_gui_custom_container,
          go_tree TYPE REF TO cl_gui_alv_tree_simple,
          go_tree_event_receiver TYPE REF TO lcl_tree_event_receiver,
          go_cc_area2 TYPE REF TO cl_gui_container,
          go_alv_area2 TYPE REF TO cl_salv_table,
          go_cc_area3 TYPE REF TO cl_gui_container,
          go_columns TYPE REF TO cl_salv_columns_table,
          go_cc_editor TYPE REF TO cl_gui_custom_container,
          go_editor TYPE REF TO cl_gui_textedit,
          go_content TYPE REF TO cl_salv_form_element,
          go_container_tree TYPE REF TO cl_gui_container,
          go_container_2 TYPE REF TO cl_gui_container,
          go_splitter TYPE REF TO cl_gui_easy_splitter_container,
          go_splitter_2 TYPE REF TO cl_gui_easy_splitter_container,
          go_cc_comp TYPE REF TO cl_gui_custom_container,
          go_alv_comp TYPE REF TO cl_salv_table.
    DATA: gt_sflight TYPE TABLE OF sflight,
          gt_data TYPE TABLE OF spfli,
          gt_fieldcat TYPE lvc_t_fcat,
          gt_sort TYPE lvc_t_sort,
          gs_sflight TYPE sflight,
          gs_layout TYPE lvc_s_layo.
    *       CLASS lcl_tree_event_receiver DEFINITION
    CLASS lcl_tree_event_receiver DEFINITION.
      PUBLIC SECTION.
        METHODS: handle_item_double_click
                   FOR EVENT item_double_click OF cl_gui_alv_tree_simple
                   IMPORTING fieldname
                             index_outtab
                             grouplevel.
    ENDCLASS.                    "lcl_tree_event_receiver DEFINITION
    *       CLASS lcl_tree_event_receiver IMPLEMENTATION
    CLASS lcl_tree_event_receiver IMPLEMENTATION.
      METHOD handle_item_double_click.
        READ TABLE gt_sflight INTO gs_sflight INDEX index_outtab.
        IF sy-subrc EQ 0.
          SELECT * FROM spfli INTO TABLE gt_data WHERE connid = gs_sflight-connid.
          IF go_alv_area2 IS BOUND.
            go_alv_area2->refresh( ).
            cl_gui_cfw=>flush( ).
          ENDIF.
          cl_salv_table=>factory(
            EXPORTING
              r_container    = go_cc_area2
            IMPORTING
              r_salv_table = go_alv_area2
            CHANGING
              t_table      = gt_data ).
          go_alv_area2->display( ).
        ENDIF.
      ENDMETHOD.                    "handle_item_double_click
    ENDCLASS.                    "lcl_tree_event_receiver IMPLEMENTATION
    START-OF-SELECTION.
      CALL SCREEN 100.
    *&      Module  STATUS_0100  OUTPUT
    *       text
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'MAIN'.
    *  SET TITLEBAR 'xxx'.
      CREATE OBJECT go_cc_area1
        EXPORTING
          container_name              = 'CC'
        EXCEPTIONS
          cntl_error                  = 1
          cntl_system_error           = 2
          create_error                = 3
          lifetime_error              = 4
          lifetime_dynpro_dynpro_link = 5.
      IF sy-subrc <> 0.
    *    MESSAGE e025 WITH sy-subrc text-e01.
      ENDIF.
      CREATE OBJECT go_splitter
        EXPORTING
          parent            = go_cc_area1
          orientation       = 1              "Vertical split
          sash_position     = 25
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
    *    MESSAGE e025 WITH sy-subrc text-e02.
      ENDIF.
      go_container_tree  = go_splitter->top_left_container.
      go_container_2 = go_splitter->bottom_right_container.
      CREATE OBJECT go_splitter_2
        EXPORTING
          parent            = go_container_2
          orientation       = 0              "Horizontal split
          sash_position     = 40
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
    *    MESSAGE e025 WITH sy-subrc text-e02.
      ENDIF.
      go_cc_area2 = go_splitter_2->top_left_container.
      CREATE OBJECT go_tree
        EXPORTING
          i_parent                    = go_container_tree
          i_node_selection_mode       = cl_gui_column_tree=>node_sel_mode_single
          i_item_selection            = gc_x
          i_no_html_header            = gc_x
          i_no_toolbar                = space
        EXCEPTIONS
          cntl_error                  = 1
          cntl_system_error           = 2
          create_error                = 3
          lifetime_error              = 4
          illegal_node_selection_mode = 5
          failed                      = 6
          illegal_column_name         = 7.
      IF sy-subrc <> 0.
    *    MESSAGE e025 WITH sy-subrc text-e03.
      ENDIF.
      SELECT * FROM sflight INTO TABLE gt_sflight WHERE carrid EQ p_carrid.
        CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
          EXPORTING
            i_structure_name       = 'SFLIGHT'
            i_bypassing_buffer     = gc_x
          CHANGING
            ct_fieldcat            = gt_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
        IF sy-subrc <> 0.
    *      MESSAGE e025 WITH sy-subrc text-e05.
        ENDIF.
        DATA: ls_fieldcatalog TYPE lvc_s_fcat.
        LOOP AT gt_fieldcat INTO ls_fieldcatalog.
          ls_fieldcatalog-col_opt = gc_x.
          CASE ls_fieldcatalog-fieldname.
            WHEN 'CARRID'.
              ls_fieldcatalog-no_out = gc_x.
            WHEN 'CONNID'.
              ls_fieldcatalog-no_out = gc_x.
          ENDCASE.
          MODIFY gt_fieldcat FROM ls_fieldcatalog.
          CLEAR ls_fieldcatalog.
        ENDLOOP.
        DATA: ls_sort TYPE lvc_s_sort.
        ls_sort-spos = 1.
        ls_sort-fieldname = 'CARRID'.
        ls_sort-up = gc_x.
        APPEND ls_sort TO gt_sort.
        ls_sort-spos = 2.
        ls_sort-fieldname = 'CONNID'.
        ls_sort-up = gc_x.
        APPEND ls_sort TO gt_sort.
        DATA: lt_events TYPE cntl_simple_events,
              lo_l_event TYPE cntl_simple_event.
        lo_l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
        APPEND lo_l_event TO lt_events.
        lo_l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
        APPEND lo_l_event TO lt_events.
        lo_l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
        APPEND lo_l_event TO lt_events.
        lo_l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
        APPEND lo_l_event TO lt_events.
        lo_l_event-eventid = cl_gui_column_tree=>eventid_item_double_click.
        APPEND lo_l_event TO lt_events.
        lo_l_event-eventid = cl_gui_column_tree=>eventid_button_click.
        APPEND lo_l_event TO lt_events.
        lo_l_event-eventid = cl_gui_column_tree=>eventid_node_double_click.
        APPEND lo_l_event TO lt_events.
        CALL METHOD go_tree->set_registered_events
          EXPORTING
            events                    = lt_events
          EXCEPTIONS
            cntl_error                = 1
            cntl_system_error         = 2
            illegal_event_combination = 3.
    * Set Handler
        CREATE OBJECT go_tree_event_receiver.
        SET HANDLER go_tree_event_receiver->handle_item_double_click FOR go_tree.
        CALL METHOD go_tree->set_table_for_first_display
          EXPORTING
            i_background_id = space
            is_layout       = gs_layout
          CHANGING
            it_sort         = gt_sort
            it_outtab       = gt_sflight
            it_fieldcatalog = gt_fieldcat.
        CALL METHOD go_tree->expand_tree
          EXPORTING
            i_level = 2.
        IF NOT gt_sflight[] IS INITIAL.
          CALL METHOD go_tree->set_top_node
            EXPORTING
              i_index_outtab = 0.
        ENDIF.
    * Send data to frontend.
        CALL METHOD go_tree->frontend_update.
      ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    MODULE user_command_0100 INPUT.
      CASE sy-ucomm.
        WHEN 'BACK'.
          SET SCREEN 0.
          LEAVE SCREEN.
        WHEN OTHERS.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    Edited by: Srinivas Kalluri on Jan 31, 2012 4:49 PM

  • JPanel do not refresh when minimizing or moving JApplet

    I�m using a JApplet that contains a JTree,some buttons and 3 JPanels. The 3 panels have the same size and are placed in the same place. So, 2 panels have the setVisible(false) and one setVisible(true), and depending on the situation, I change the panel I want to show. The problem is that in the appletviewer, when I move the applet, I minimize it or I put a window in front of it, the JPanel visible (all of them contain JTextFields, JTextAreas, JCombos ...) does not refresh and I cannot see the components inside the panel. This doesn�t happen with the JTree and the buttons.
    Any help ? Thanks !

    I think I got the solution. First you have to add the panel to the frame :
    this.getContentPane().add(panel, new XYConstraints(240, 112, -1, 484));
    and then add the elements to the panel.
    If you first add the elements and then the panel to the frame, the elements inside the panel are not refreshed (they dissapear) if you minimize or move the window.

  • Detail region does not refresh when selecting from a drop-down list in master region

    I am using DW CS3 and have updated to version 1.6.1 of Spry.  Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic.  It works fine in this format (clicking on a row displays the correct graphic).  However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list.  Listed below is the code produced when I used the insert Spry Repeat List.  I got the same results when adding a spry:setrow="dsChartNurse".  I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
    When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
    <div spry:region="dsChartNurse">
           <select name="select" spry:repeatchildren="dsChartNurse">
             <option value="{name}">{name}</option>
           </select>
    </div>
    <div id="image" spry:detailregion="dsChartNurse">
       <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
    </div>
    Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

    Thanks for the quick reply.  I did solve the problem I was having by changing from onclick to onchange in the master region.  But, now I have another problem with, of course, IE.  I just put in online at http://www.minursemap.org/ageDistNurse.html.  When opened in IE, the drop down list displays the last entry, but the image is for the first in the list.  Thanks again for your help.

  • Query not refreshing all data when run in workbook with other queries

    All,
    I have the following problem. I have a workbook that has two queries, one on each tab.
    The specific thing I notice that the company code is not showing up in the query at first until I hit refresh. Both queries use the same company code and user variables. When running the workbook I have each query set to "refresh query when running workbook". I have been able to duplicate this problem in either of the two queries, depending upon which company code variables I use. When I run the workbook, one of the two queries never updates company code variable unless I "refresh" the query directly after pulling up the workbook.
    I have changed the company code variable and used other company codes in each query, some required, some not, but ultimately a few of the key figures are not populating with current data and the company code is missing...unless I hit refresh on that query. I have tried creating new workbooks and removing and reinserting the queries, but this doesn't work either.
    And both queries run fine when executed alone.
    Again, Both queries use the same company code variable.
    Any help will be rewarded with points and is appreciated.

    Tasha,
    Remove the queries from the workbook and reinsert them. This should show the desired result.

  • ALV OO data is not refreshing when selection changes on previous screen

    Hi All,
    I have a module pool with 2 screens. First screen has plant and 1 button. When button is pressed in screen 1 the 2nd screen shows some data as per the plant selection in screen 1. The output of screen 2 is coded in OO ALV.
    Now the problem is first time when plant is input and button is pressed the data is fine in screen 2. However 2nd time onwards the data is not getting updated on ALV when plant selection is changed! It gets stuck to the data it produced the very first time.
    I've debugged the program and table which passes to method "set_table_for_first_display" is fine i.e. it selects new data everytime as per plant and fills this table. I've also tried GUI FLUSH, calling method "refresh_table_display", FREE, clear, unassign etc. etc. at diff. points but nothing seems to work
    <b>I'll be generously giving away points with any help.</b>
    Thanks.

    Hi,
    1. Please refresh the output table before the select query which you are passing to set_table_for_first_display.
    2. The ALV container needs to be freed & again generated everytime you call the screen.
    so on the BACK button of Screen 2 in PAI, release & clear the container
    In the PBO of Screen 2, Assign grid to container.
    Here is the sample program:
    PROGRAM TEST.
    DATA: OK_CODE LIKE SY-UCOMM,
          GT_SFLIGHT TYPE TABLE OF SFLIGHT,
          G_CONTAINER TYPE SCRFNAME VALUE 'BCALV_GRID_DEMO_0100_CONT1',
          GRID1  TYPE REF TO CL_GUI_ALV_GRID,
          G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
    *       MAIN                                                          *
    SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
    CALL SCREEN 100.
    *       MODULE PBO OUTPUT                                             *
    MODULE PBO OUTPUT.
      SET PF-STATUS 'MAIN100'.
      IF G_CUSTOM_CONTAINER IS INITIAL.  " Check this
        CREATE OBJECT G_CUSTOM_CONTAINER  " DO this
               EXPORTING CONTAINER_NAME = G_CONTAINER.
        CREATE OBJECT GRID1  "DO this
               EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
        CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
             EXPORTING I_STRUCTURE_NAME = 'SFLIGHT'
             CHANGING  IT_OUTTAB        = GT_SFLIGHT.
      ENDIF.
    ENDMODULE.
    *       MODULE PAI INPUT                                              *
    MODULE PAI INPUT.
    *   to react on oi_custom_events:
        call method cl_gui_cfw=>dispatch.
      CASE OK_CODE.
        WHEN 'EXIT'.
          PERFORM EXIT_PROGRAM.
        WHEN OTHERS.
    *     do nothing
      ENDCASE.
      CLEAR OK_CODE.
    ENDMODULE.
    *       FORM EXIT_PROGRAM                                             *
    FORM EXIT_PROGRAM.
    CALL METHOD G_CUSTOM_CONTAINER->FREE. " Do under BACK button
    CALL METHOD CL_GUI_CFW=>FLUSH. "Do under back button
      LEAVE PROGRAM.
    ENDFORM.

Maybe you are looking for