Query Not Running Via BEX Analyzer Role Menu

Hi All,
I have a problem when executing queries via the BEX Analyzer role menu. I can select a query from a role but, when I select the query to run, nothing happens. When I select the same query from the infoarea it runs without any problems. This behaviour occurs for all our queries so is not specific to a particular query.
We're running on version 3.5 and I've just upgraded to the latest patch but this hasn't helped at all.
If I use the role menu via the web application designer the queries all work fine so the problem looks to be pointing at the role menu within BEX Analyzer.
Any ideas ?
Dave

this issue is more related to Security , Roles & authorisation.
u will have to talk to Security team.
While installing latest patch,usuallys uch trouble occurs.
the excel extensions , roles gets affected sometime..

Similar Messages

Query not Opening using Bex Analyzer

Hi Experts,
We have developed queries in Designer, and we can execute them from query designer.
But if we try to run the query from Bex Analyzer no query output comes.
Output comes as No Data Available.
This issue is happening from past 3 days..before that we were able to execute from Analyzer also.
I am wondering has any setting is changed.
Kindly suggest , as this is very important for us to solve ASAP.
Thanks
Mayank

Hello,
After applying the latest patches for core GUI and BI components, and the MS Office patch (sap Note 1025122), it should work correctly. I have faced the same issue and corrected it by applying these patches. (The MS office that I am using is MSOffice2003.)
Can you try opening the analyzer from the start menu, instead of using transaction RRMX?
If this way it is working correctly, then the softwares pieces are setup correctly.
Then you may want to check the customizations of your BI system. i.e. IF it was upgraded from the BW3.5 system? What strategy are you using for the report migration? The administrator might have changed the settings according to the strategy and current phase of the report migration.
Regards,

Working with documents via BEx Analyzer not using the portal

Hello,
i read that we are able to create (work) with documents (comments) via
BEx Analyzer. When i want to add a comment how it is described in the
help we get connected to the portal. We dont want to use the portal for
that. Therefore we searched a way to skip the portal. We read that in
BW Versions before 7.0 the portal was not connected but since 7.0 we
have the portal connectivity, but it should also possible to not use
the portal and to access directly the BI Server. I searched for the
Customizing to do so but i could not find it where to switch to the old
logic.
And another question is when we use the Portal with the knowledge base . The documents are stored in the document framework (SKWF). Is it the same as the Datawarehousing Workbench --> documents. This storage we want to use.
Can anyone give me a hint?
Kind regards,
Murat

Hi Murat,
We are also facing the same issue of when trying to create/access the documents from BEx analyzer it is connecting portal , we need to bypass portal and directly access the document browser in BW server.
In your thread you mentioned it is done. So can you please let me know how did you enable the old configuration?. It will be very much helpful to us.
Awaiting for your reply.
Thanks,
V.Senthilkumar

Problem in executing query in browser and bex analyzer

i am not able to execute query in browser nor bex analyzer...
problem is that i dont have option to run in bex analyzer in query designer (menu bar seems missing in query designer and how can i get enabled
and when execute the query in browser using bex query designer ..it prompts me with following error
URL http://saperpdev.saperpdev.com:8002/sap/bw/BEx call was terminated because the corresponding service is not available
Note
■The termination occurred in system ERD with error code 403 and for the reason Forbidden.
■The selected virtual host was 0
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:SAPERPDEV_ERD_02-v:0-s:403-r:Forbidden
and i tried to open the query from bex analyzer level
it prompts me as follows
macros are disabled because the security level is set to high and digitally signedtrusted certificate is not attached to the macros,to run the macros change the security level to lower settings
pls suggest me

hi suman,
thanks for your response.. but let me be more clear
i am using sap gui 7.20 front end and when i execute rrmx i am able to navigate to BEx analyzer but when i tried to open a report which i create i get following error message..
you do not have sufficient authorization for infoprovider zic_proj
function module /SDF/AL_MAP_TRANSID_LOGH doesnt exit
second thing is that i tried from bex query designer to execute the report ..but i am not able to execute the report...
i hope some connections seems missing..please let me know what to do ASAP..
and where can i post this question to get fast reply

Roles not displayed in BEx Analyzer for NW2004s

We are evaluating a technical upgrade only from BW 3.5 to Netweaver2004s. Under this plan, the 3.5 security will not be migrated to 7.0. We are using SAPGui Frontend 6.40 for BI. The existing BW 3.5 roles are not display in the Role Menu of SAP NetWeaver BEx.
Any ideas on this?
Isbell

Got the following response from SAP and this resolved the issue
please add the parameter
DELETE_DOUBLE_TCODES with PATH = 'NO'
into the table: ssm_cust (via tx: se16)
The settings in SSM_CUST defines a compress mechanism for the user menu
known as "Redundancy avoidance" and described in notes 357877 and 357693
Redundancy avoidance deletes easy access menu entries for doubled
transaction codes whenever SSM_CUST contains
1. an entry CONDENSE_MENU with PATH = 'YES' and
2. either an entry DELETE_DOUBLE_TCODE with PATH = 'YES' or no entry
DELETE_DOUBLE_TCODES, at all.
If you don't want doubled transaction codes to be deleted, then simply
add an entry DELETE_DOUBLE_TCODES with PATH = 'NO' into table SSM_CUST.
Suresh

ROLES not found in BEx Analyzer

Hi Gurus,
I have created a role and assigned it to a user.My problem is when i am trying to assign a query to this role, it says that there is no role defined.
I am not able to see the role i have created in BEx query selection screen.Could someone help me on this.
Thanks in advance.
Regards,
satya

Hi,
when we are trying to save the query my role is not appearing so am not able to save it.
My query appears in that particular role only when it get's saved in that role.But the role I have created doesn't appear at all.
regarda,
satya

Bex Query Not Running

Hello
I have built BI7 Query and run it. It goes to the portal where I use my user password and it comes back with the following results
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sap.ip.bi.base.parameter.ParameterConverter.createFromServletRequest(Ljavax/servlet/ServletRequest;)Lcom/sap/ip/bi/base/parameter/IParameterList;.
Exception id: 01:49_19/01/08_0045_52644550
See the details for the exception ID in the log file
I also cannot save a Web Template neither can I Save a Report using Report Desiner. Both come back with authorisation errror. I think all three could be related or maybe they are differnt.
Please can you guys help and offer a solution?
Thanks in advance.
Steve.

Hi Lambertus,
I also face same problem. Please can you elaborate the solution you described or what should I be asking my basis team to do to solve this issue.
Regards
Anand

Macro not working in BEx Analyzer

Can you please explain why my Macro is not working?
We're on BI 7 with Excel 2007. I have done the following:
1) Open Workbook from BEx Analyzer and the result display on the worksheet. The was inserted in C10 and therefore, the result was display from C10 onwards.
2) I have created a Macro with the following code:
Sub Macro1()
' Macro1 Macro
    Range("C5").Select
    With Selection.Interior
        .Pattern = xlSolid
        .PatternColorIndex = xlAutomatic
        .Color = 65535
        .TintAndShade = 0
        .PatternTintAndShade = 0
    End With
End Sub
3) When click to run the Macro manually, I can see the color of C5 is changed.
4) Now I have include this Marcro in Workbook Setting ->Exits tab, Run Macro on Refresh. Here I enter my Marco name.
5) In Workbook Setting ->General tab, I also set the Refresh Workbook on Open option.
6) I have also set the Trust Center setting: select Trust access to the VBA project and Enable all macros.
7) Then I save the Workbook.
8) when I re-open the Workbook, the color of C5 is not change!!!
Can you please help.

Aglukas,
Thanks again. I understand the name of the Macro can be anything and this is how to create the Macro:
1) Run workbook, the query result display on the screen.
2) In Excel 2007, I click on Developer tab ->Macro.
3) Enter Macro name (Macro1) and click on Create button.
4) I have VB editor open with following:
Sub Macro1()
End Sub
5) So added the following code to Macro routine in VBA Module:
Sub Macro1()
With ThisWorkbook.Sheets("Sheet1")
Stop
.Activate
.Cells(15, 1).Interior.Color = RGB(220, 254, 250)
End With
End Sub
6) I then added the Macro1 to Workbook Setting ->Exit tab, and click on Add Macro button.
When I run/refresh the workbook, I didn't get into debug mode at all!!!
What is wrong in above steps?
Please advice, thanks.

Variable window not showing through BEx analyzer

HI Experts,
I am facing a weired situation with one of the variable.
I have a Customer Exit variable which is Input Ready and entry is Mandatory, i wrote some code in CMOD to fetch default values through I_STEP=1 and my requirement is that user should able to change the values if needed.
now, the problem is, I can able to get the variable input screen when i execute the query through RSRT with Query display mode as HTML. But when i execute the same query in BEx analyzer or through RSRT with different Query Display modes like List/Bex Analyzer am not getting the variable input screen.
The variable is taking the default value generated through CMOD code and the same values are being used in determining the query output..
Please suggest me what do i need to do inorder to view the Variable input screen in BEx analyzer.
I am using BEx Analyzer 3.x for the queries and working with
SAP Version   -
   SAP EHP 1 for SAP NetWeaver 7.0
DB:                  -
   ORACLE 11.2.0.2.0
OS                   -
    AIX

I found the solution in one of the SAP notes and the issue is resolved.
We used Note: "1609237" to resolve the issue. Hope this might help anyone who faces this same problem..

Local formula created in web analyzer not reflected in bex analyzer.

Hello all,
I had created a Local formula in the web analyzer and saved the query as a view. Now, when I open the same view in
bex analyzer then I cannot find the local formula column; i.e. it is not reflected in the bex analyzer.
Is this an error or this is not possible?
Thanks in advance,
Sandy.

Hello Sandy,
If you create the formulo at the web analyzer you will not be able to see it at the bex analyzer. Only if you create at the query designer, so you will be able to see it at the web and bex analyzer.
Thanks,
Diego Ferrary

Report not running in BEx browser and RSRT in production

Hi All,
For one of the report I am getting very different error in production system. I am able to run the query in BEx analyser but when tried to run in Bex browser this gives error and terminates the report. When tried to run through RSRT it gives error and shows that some charcteristics are removed from infocube. This means it is using some very previous version of query. But afterwards the query was changed and transported to production. Still why am I getting this error.
As if the RSRT is accessing the old query and it is not refreshed the new one. If checked in designer it shows the latest query there. Can anybody suggest what could be the issue here?
Thanks in advance for your help.
Regards,
Wrushali

Hi,
Actually if we make a new query and save as then it works but this query doesnt work. The transport is ok. No error just warning is there.
I tried the delet old ABAP and generate query but still geting the same error. Can you tel me what this delete old ABAP does.
When execyted the query it goes to debug mode and some code is executed and if we check the dump is shows RAISE EXCEPTION and error in some SAR...RT19 program.
Please suggest if any idea.
Regards,
Wrushali

User Variables values are not showing in Bex analyzer

Dear Friends,
I created a report in Bex analyzer ( Excel).
Now i want to show the variables values in the report.
i put text item there and click on it but in filter tab there is no variable is exist.
Any help will be highly appricated.
Regards
Naeem

dear i know how to display the variable values.
But unfortunatilly there is nothing appear in filter tab.
my variables are not in filter tab its empty.
i already choose the data provider.
regards
Malik

Query not running in report builder 3.0

hi, i can run my query in mgmt studio (version 2008R2) and within the query designer of report builder 3.0 but it will not run from report builder. i get a generic error message of "an error has occurred during report processing. (rsProcessingAborted)".
the query uses report parameters and is written with dynamic sql (using a pass-through to oracle). any ideas why the query doesn't execute in report builder ? thanks a bunch,

Hi KanataPablo,
According to your description, it seems that you are using linked server to pass value to oracle. Seeing that the query is worked well in Management Studio, you may have the permission to connect to oracle (In this scenario, make sure the users to run the
query in SSMS and Report Builder are the same user). So this issue can be caused by the user’s permission to connect to report server, the credential of data source and the dynamic query.
We can add the current user as a Login, then click Properties and navigate to User Mappings page, enable ReportServer and ReportServerTempDB options.
We can try to type user name and password, and enable “Use as Windows credentials” as the credential used to connect to data source.
Try with dynamic query:
="Select column1, column2 From tableName where ID IN (" + JOIN(Parameters!param1.value, ",") + ")"
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SAP Query not running

Hi,
I am doing SAP query, If I select Company Code, i need to get the resule of
GL a/c, Buss Area, Cost Center, Profit Center
For this in table joints i taken KNA1, KNB1, SKB1, CSKS
then also i could not run the report.
Rgds
sunfico

Hello
When you have chosen a query and a user group on the initial screen, you can execute the query online or in the background.
Executing Queries Online
Executing Queries in the Background
Improving Response Times
Interactive Functions for ABAP Lists
Direct Interaction
Check this link for further notes executing queries
http://help.sap.com/saphelp_erp2005vp/helpdata/en/b7/26ddebb1f311d295f40000e82de14a/frameset.htm
regards

OLAP Query not running

Hi Gurus
I am getting and exception while executing a MDX Query through OLAP Query .
All my queries were running properly until yesterday from OLAP query as well as through MDXTest TCode .
But today it gives me an excetion
com.sap.lhcommon.webservice.SoapException: The XML for Analysis provider encountered an error
I know it is generic error description for any kind of error back from BW but here situation is
My query is running from MDXTest with out any problem .
Any ideas on this like where to see the logs..etc?
Thanks in advance.
-Hari

It is solved.
It was because User which we used for configuring data server doesn't have enough roles.
I have created a new connection with my user name and it works .
But interesting thing here is, it was working with the system user i was using with old roles and security team claims that they haven't changed any role for that user . But last day that user locked because of pswd expriration and it was unlocked .After wards my OLAP Queries are stopped working .
And its really pain with out getting proper error message from OLAP Query.
From my experience to debug these kind of errors:
Make sure your MDX query runs from MDX Test .
If it runs successfully, then we can narrow down to the connection setting in MII .
Thanks
Hari

Query Not Running Via BEX Analyzer Role Menu

Similar Messages

Maybe you are looking for