Query not showing data correctly

Hi All
i have one query on FILG cube in which FIscal period and one amount field is in columns
when i see in display data i have seen that there is a data for the period 001/2009, 002/2009 and 006/2009
but when i run the query it only display the data for the period 001/2009, 002/2009 and 006/2009 data is displayed in the overall result columns
this is happening only for one company code
please reply if anyone has came across this issue
Thanks

HI,
when i run the query with selection on Fisper - 001/2009 to 006/2009 and comp code -2000
then it displays data for 001/2009, 002/2009
but the data of 006/2009 is displayed in overall result column
there should be one another column with 006/009
for example
Fiscal Year/Period 001/2009 002/2009 Overall Result
Amount Amount Amount
but when i see in listcube it shows the data for Fiscal period 001/2009, 002/2009 and 006/2009

Similar Messages

Please see this query, not showing data Why?

I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO

Where "first table" is merch_order and "second table" is export_order1?
How many distinct orders are in each table?
Are there any NULL order numbers in either table?
I'd put money on the fact that if commenting out a clause causes a number of rows to be returned, that clause is filtering out all the rows. You'll need to go through your data to figure out why the NOT IN clause is filtering out all your rows.
Justin

Query not showing data

Hi,
I have an infoset which is on top of two ODSs.
Data for a particular cost center is present in both the ODSs.
There is no data prsent in RSISET for that CC.
Also the query is not showing any data for that CC but data is showing data
for other CC for the same date.
Please help.
*points assured*

Dear Sourav,
You can Check if there is some other primary Key differences in the Infosets .Have you declared only Costcenter as the Key for both the ODS Objects ?? Check the other links that you have maintained as a part of key in Infoset.
Hope it helps..
Thanks,
Krish

Problem between SSMS and Report ! Filter query not showing data or showing wrong data

Hi all,
In short: I have a report with multiple values such as name of shop, postal code etc. The parameters have no default value and act as "like". If someone enters "krant" he'll get all the shop names that contain "krant" in their
name etc.
Same goes for postal code, if someone enters 2550 he'll get all data for 2550. The problem although is that if a user start with postal code as parameters and leaves the shop name empty, the shop name is not shown in my report! The other way around it works,
when I enter shop name i'll get all shops + postal code in my report.
I know this is because POS name cannot be shown in report because it's left blank, but I want my MDX query to be able to give me the POS names even if I only enter postal code.
Can someone please please look at my query below? I need to add 4 more parameters this way later on too!
SELECT
[Measures].[Sales amount]
ON COLUMNS, NON EMPTY
Filter(
[Point of sale].[POS name].AllMembers,
InStr(
[Point of sale].[POS name].CurrentMember.MEMBER_CAPTION,
@PAR_POSName
) > 0
*Filter(
[Point of sale].[POS postal code].AllMembers,
InStr(
[Point of sale].[POS postal code].CurrentMember.MEMBER_CAPTION,
@PAR_POSTAL_CODE
) > 0
*[Point of sale].[Client id].[Client id]
*[Point of sale].[POS id].[POS id]
*[Point of sale].[POS street].[POS street]
*[Point of sale].[POS town].[POS town]
*[Point of sale].[POS housenumber].[POS housenumber]
ON ROWS
FROM [mycube]

You have to use
StrToMember (MDX) /
StrToSet (MDX) /
StrToTuple (MDX) to convert the Parameter; see
Parameterized Reporting Services Reports with Analysis Services as a Data Source
Olaf Helper
[ Blog] [ Xing] [ MVP]

Discoverer Plus 10gR2 not show data when the script of view have package

Hi my friends.
I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
SELECT d.price,
d.total,
d.min,
d.mx,
TO_CHAR (SYSDATE, 'q') quarter,
d.fid,
k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
k_xpxpd_qry.f_xpeds_salary_ca_u (
d.prod,
d.id) xp --> package
FROM px_prices_proc c,
xp_sla_max d,
xmp_sla_puc b
WHERE a.prod = b.prod
AND a.id = b.id
AND a.prod = k_xps_tools.f_obt_prod --> package
When I used the views on discoverer plus for construct the report, when execute the query not show data.
Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.

Hi Tux,
This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
Patrick

PLD Report does not show data from Query

Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
Nick

Hi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty

Date difference is not showing the correct result for date interval

Hi Expert,
                I've created two formula variable one for PO date and another for GR date
while i am taking the date difference of GR and PO date for single PO date selection
it showing me correct result , but while i am taking the date interval for PO date it not
showing the correct result.
eg: PO date: 01.01.2010   for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
      it showing the result 2 and 5.
But if i am taking date interval for PO date:
eg: 01.01.2010 - 31.01.2010
PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
it showing me 14, 21 and 29
Thanks and Regards
Lalit Kumar

Hi Expert,
                Through replacement path.
Thanks and Regards
Lalit Kumar

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

EXCEL out put is not showing data

Hi All,
My report is working fine it is showing data in XML but it is not showing data in Excel output. Excel output is empty.
i have attached excel and xml files. please help me.
FYI: these are migrated reports from 10g to 11g.
Thanks in advance for your time

Using ua.bat we upgraded 10g to 11g., we got sucessfully message.
after upgrade if i try to open excel it is not showing opening and showing action instead of excel name . I though excel out put has corrupted. i downloaded excel layout from 10g and uploaded in 11g report using upload layout.
we did not make any changes in database.
below one is not related to this one but .. after upgraded reports multi parametrs did not work if i select more than one column ( i opened as different topic) then i have removed
( (coalesce(null, :P_PPD_REGION) is null) and kept(region.X_REGION in (:P_PPD_REGION) from following statement then i did report is working with multi parameters.
my doubt is is it correct thing i did ? if not how can my multi parameter will work . we are using oracle as database.
AND ( (coalesce(null, :P_PPD_REGION) is null) or (region.X_REGION in (:P_PPD_REGION)) )
AND ( (coalesce(null, :P_COUNTRY) is null) or (region.REGION_CD in (:P_COUNTRY)) )
AND ( (coalesce(null, :P_SITE_NUM) is null) or (ptcl_site.site_num in (:P_SITE_NUM)) )
I really appreciate for your support.

CFGRID does not show data (CF9.0)

Under development server, CFGRID show data , all is fine , correct. (CF9.0 version dev)
Under production server , CFGRID does not show data, only a grey line (like a HR).
How to debug this ?
Thanks,

Kindly check below to troubleshoot this issue:-
Is there any difference between your CF production & developement server setting summary?
Is there any browser script level difference between your both CF server?
Are you getting any relevant logging error in your CF server application.log & exception.log?
Run a very simple cfgrid running app to check, either getting issue with that too or not.

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

2lis_03_bf data is not showing data in RSA3

Hi,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
<b>Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished</b>
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in Advance

ODS Settings
BEx reporting option --> If this indicator is not set, no SID's are generated for the new characteristics when the data in the ODS object is activated.This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries.
Refer this link for more information...
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/frameset.htm

SSAS cube is not showing data

Hi All,
I have build a cube in ssas 2008. The cube processes successfully. but wheni browse the cube it does not show data.
I check it in dsv Fact table--> Explore data --> it displays data. But i cannot see the data when i browse the cube.
I have 3 cubes in one solution, there i also processed the complete solution. There is no problem with other cubes except for this one.
I have only dragged the measure and not the dimension. hence i do not think there can be any relationship issue.
Can anybody please suggest??
Thanks & Regards, Chaitali Thaker

Hi Chaitali,
Check if the CALCULATE; command is present in the Scripts/Calculations tab.
Ensure that you specify the relationship between dimensions and measure groups.
Set any related dimension UnknownMember properties to Visible.
thank you,
Radhakishan

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Query not showing data correctly

Similar Messages

Maybe you are looking for