Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Similar Messages

Spotlight is not showing any results!

I just upgraded to Leopard and now my spotlight app will not show any results when typed upon. I have tried to re-index the volume through system pref. but it didnt work. Anyone know any other methods to get it back into shape? thanks

enter the following terminal commands form an admin account:
sudo mdutil -i off /
sudo mdutil -E /
sudo mdutil -i on /
please copy and paste them exactly as given. you'll have to enter your admin password (which you won't see) after the first command. that's normal.
the commands turn spotlight off, delete the index and turn it back on.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

:-) the problem is solved. Thanks to a great typ in one of the other discussions with alt+cmd+S iTunes looks again like something I recognize. After removing the iPod from iMac and also from the connecting "holder", turning it on ad off, rebooting the iMac, maggic happens and the iPod now shows in iTunes and everything works just fine.

Business rule not showing the result

When i am executing a business rule, it runs successfully but it does not show any result. But when i enter any amount in that specific cell where the BR should calculate the amount and then run the BR then it shows me the required result. What can be the reason for that?
We are on 11.1.2
and im making BRs through Calc Manager (Wizard Based)
Edited by: ar_aff on Mar 24, 2011 9:56 PM

I think that's about Block problem (value of a cell). The BR can't open block automatically. In BR sorce usually used a command Set Createnonmissngblk on before calculating value;

Not showing any results V_V2 resheduling sales and stock transfer documents

My client using IS Retail . First i create sales order i want resheduling perticular order through V_V2 i enter article and site ,process sales documents,process stock transfer order,unconfirm quantity and leave simulation but it does not showing any results...previous showing from 2008 to 2010 sales orders only....
Please give answer i am waiting your reply...
Edited by: amitp2121 on Mar 3, 2011 11:57 AM

Hi Hweiling,
In my opinion V_V1 used to create confirmed backorder (line item where confirm quantity in first schedule line is 0 and there is no second schedule line) .
V_V2 is used when you want to alocate your stock based of priority or some criteria.
For example you have order 1 that created on 07.2007 confirmed but you hasn't delivered yet, then you have order 2 that created on 08.2007 it's not confirmed, and you have the other order 3 that create on 01.2008 and it's confirmed ready to deliver 03.01.2008. You can use V_V2 to alocate the stock to first order, 2nd order and third order. So you can deliver the first order first, 2nd order and then the 3rd order will be in backorder.
If you run V_V1, it's only update the stock for second item (if stock is enough).
If you think why it's not update the order that you want when you run V_V2, please check the criteria and the stock.
Guys please correct me if I am wrong.
tsalasi

QUnit not showing any results - VisualStudio 2013

In Mircrosofs book:
"Programming in HTML5 with JavaScript and CSS3" there is testing with QUnit.
Have done exactly as the book describes with in an example with an webcalculator in excersise 3.
But when I run the debugging with QUnit does not show any results.
It does not matter if I program an
error..nothing is displayed when I´m start debugging.
Only a blue line with the following:
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.95 Safari/537.36
My question:
How do I make QUnit to show something?
I really appreciate your answer
:0)

Hello,
Please post your question in ASP.NET forums here:
http://forums.asp.net/
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

cm:search is not returning any result when logical operator '!' is used.

<cm:search is not returning any result when logical operator '!' is used.
I am using BEA 9.1 content management services API. When I run the following query I am not receiving any results. Also no error or exceptions are seen in the weblogic or cmspi log.
The query is <cm:search id="docs" query="!(object_name like 'Sport*')" />

HI cam
Thanks for your reply, but i found the problem it was because my server administrator password has changed by network guys... and because of it crawler unable to access the content
I wrote my solution here i hope it will help other people
http://bvs-sharepoint.blogspot.com/2015/03/sharepoint-search-is-not-returning.html
RB

Console not seeing Media Centre when wired through...

I have an issue that is causing no end of problems. My current wired network and wifi SSIDs
BT Home Hub 2----- DHCP - Wifi 802.11g only {SSID}OLD
|             |
|           Sky HD Box (Wired)
|           XBOX360_1 (Wired)
|
TP-Link WR1043N router --- Wifi 802.11n {SSID}N
|            |
WinXP1   WinXP2
Connected to {SSID}OLD I have:
                                          2 PS3 consoles
                                          XBOX360_2
                                          WinXP3 (laptop)
                                          WinXP4 (desktop)
Connected to {SSID}N I have:
                                          XBOX360_3
                                          3 tables
                                          4 android phones
                                          Win7_1
All hardware can connect to the internet without problems and anything connect to both {SSID}N and {SSID}OLD or wired running through the WR1043N router can communicate without issue.
WinXP1 hosts a a number of services (Web, POP, FPT) which communicate out to the internet as well as all internal devices and also hosts a Tversity Media Server. It also acts as a print server for the house with all devices taking advantage of the network printing, both Win and LRP, once again without issue.
Thanks to WMP11, WinXP1 also hosts a secondary media player and the WR1043N router also hosts a media player. All devices on both and either wireless network can see all 3 media players and play video and media flawlessly.
However I am having a problem with the 1 piece of hardware that is wired into the Home Hub itself. The device named XBOX360_1 can communicate fine on the internet (XboxLive, Lovefilm, IE) but it cannot reliably see any of the 3 media servers running on the network. Sometimes it sees nothing, then it sees them all but cannot connect, then it sees 1, lists the media available but will not play anything.
I have tried all 3 XBOX360 consoles in that port and non of them can see the media servers when wired into the Home Hub, yet all 3 can see it when wireless. I have not tried wiring the consoles into the WR1043N router but as the WinXP2 can see everything on WinXP1 fine, I am happy it is nothing to do with the TP-Link kit.
Also as anything connecting through {SSID}OLD has to pass through a wired network through WR1043N, I can say it is not a comms issue between WR1043N and HH2.
I am only left with the possiblity that something on the HH2 is blocking traffic between 2 wired ports or is introducing an increased amount of network lag, worse than over wifi. I have tried a combination of all 4 ports on the HH2 and tried 3 different network cables between HH2 and the console and nothing seems to work.
Is there any experience of there been communication issues between the ports on HH2 previously, or is there anyone out there with any more ideas because I am all out of them.
Thanks
I am guided by a force much greater than luck.

ps3 Wired to HH - dlna protocol error 7531 - Appears to be a generic comms failure.
Win7 Wired to HH - intermittant, slow, not Ideal
** Decided rather than moving my consoles about I would swap out the routers first **
Swap out the WR1043N entirely for a switch - same results as previous test when running through HH. No/intermittant connection to DLNA/Media servers slow/intermittant connection over HTTP, port 8080 etc
Now the good news
Swap out the HH2 entirely for a switch - flawless performance across all connections and protocols. HH2 spurred off the switch so still had internet enabled and HH still acted as DNS, the only difference is the XBOX is not passing through the HH to talk to media server.
It appears there is some interferance being introduced between the ethernet ports on the HH2 so time to replace it. The Win7 laptop is able to compensate for this to some expent but the consoles cannot.
I unplugged the Sky box which also plugs into the HH and it does seem to at least transmit the Media Server library, but as soon as streaming starts, it cuts off again.
I only see 3 solutions
1. Ask BT for a new HH, unlikely due to its age
2. move to another provider and get a new modem/router free
3. buy another modem and move the WR1043N, great more money and not what I bought the WR1043N
Personally I am thinking option 2 is the least hassle and most cost effective. Thanks for the bounce off anyway.
I am guided by a force much greater than luck.

Capacity bar does not show detail in itunes

Capacity bar does not show detail in itunes 10 when iphone is connected via wifi
when I connect via cable it corrects itself
running os 5.01

PLEEEEASE
i bought Apple TV 2 days ago but i couldnt bind it to my i tune??? i tried everything , my apple TV doesnt show on my I tune ?? theu are on the sam WIFI network ( Time capsule) same account and both updated !!
can anybody help me to solve this problem

Form when running through menu

Hi
I have a form - and when I run it from forms, it runs with the a toolbar up the top with icons for save, delete record etc. However when I run it through a menu (.mmb), it doesn't have this toolbar at the top. How do I make it show this toolbar when running from a menu?
Thanks
Martin

Sorry, I didn't see your reply before.
I think the problem could be that you specify No_Replace. This means that [Oracle Forms will keep the default menu module of the calling form active for the called form|http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builta_c/callform.html?tp=true].
You should look into using the FORMS_PATH variable instead of using the full path to the form, it's not essential but it's more flexible. On earlier versions this is FORMS90_PATH, FORMS60_PATH etc, and is set in the .ENV file (assuming you're on webforms).

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

IOS 8: spotlight not showing wikipedia result snippets

hi
running 8.0.2.
iOS 8: spotlight not showing wikipedia result snippets.
it does show the static Search Wikipedia link however.
how to get the spotlight search snippets of wikipedia to show, as advertised?
thanks

Turn Spotlight Suggestions on and off a few times. If it still doesn't work try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
I'm using a iPad but I can't see that making a difference.

CC Bridge slow-. adjustment brushes not showing size, adjustments when done blind are slow to react

I am running Imac 2.7 GHz    16 gb ram    600 gb hard drive available
adjustment brushes not showing size, adjustments when done blind are slow to react.

Bridge is far more than a file browser.   Bridge does what lightroom does.
When working with Raw files, there are tools,   **adjustment brushes** that allow you to dodge and burn raw files.
These brushes are size adjustable and now with CC, I can not see the size of the tool I am using.
So you might want to look at Bridge differently, as it is a very powerful tool.
Anyone else have a similar experience with CC version of Bridge?

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

Query not showing detailed result when run through query Designer or Portal

Similar Messages

Maybe you are looking for