Query: Not Update the resource provisioned AD
Someone can help me with this case, I configured the connector for the supply of Active Directory, up here all goes well, when trying to enter the domain with the user supplied I do not take into consideration the assigned password and other details to update any data, this is the password I fearlessness the following error in the log.
ERROR [XL_INTG.ACTIVEDIRECTORY] Problem modifying object: javax.naming.OperationNotSupportedException: [LDAP: error code 53 - 0000001F: SvcErr: DSID-031A0FBC, problem 5003 (WILL_NOT_PERFORM), data 0
]; Remaining name 'cn = JLK SENSI'
Thank
Message was edited by:
JLK
Friend: Kunwar.nitesh
No custom attribute, the only set default,
The second comment mentioned that could be another BUG, I infer that that version of the connector that use the 9.04 is not as good
Friend: Martin_Sendren
To you mean with this message that gives me the connector: WILL_NOT_PERFORM
The fact that I was the administrator's default Identity Manager (xelsysadm).
As for the password of the resource provision in the active directory will disable the complexity of passwords in the political choices of security.
What do I recommend to solve this problem?
Thank
Similar Messages
-
I've changed iPad carriers but iTunes will not update the carrier settings,
I've changed iPad carriers but iTunes will not update the carrier settings, stating that the requested resource could not be found. Does anyone know how I can download the ipcc file and force an update.
Your iPad may already have the latest carrier settings, especially if you have updated to iOS 4.3.3.
-
Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
CheersHi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support -
I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
Not Updating the Values in the JComboBox and JTable
Hi Friends
In my program i hava Two JComboBox and One JTable. I Update the ComboBox with different field on A Table. and then Display a list of record in the JTable.
It is Displaying the Values in the Begining But when i try to Select the Next Item in the ComboBox it is not Updating the Records Eeither to JComboBox or JTable.
MY CODE is this
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.DefaultComboBoxModel.*;
import javax.swing.table.*;
import java.sql.*;
import java.util.*;
public class SearchBook extends JDialog implements ActionListener
private JComboBox comboCategory,comboAuthor;
private JSplitPane splitpane;
private JTable table;
private JToolBar toolBar;
private JButton btnclose, btncancel;
private JPanel panel1,panel2,panel3,panel4;
private JLabel lblCategory,lblAuthor;
private Container c;
//DefaultTableModel model;
Statement st;
ResultSet rs;
Vector v = new Vector();
public SearchBook (Connection con)
// Property for JDialog
setTitle("Search Books");
setLocation(40,110);
setModal(true);
setSize(750,450);
// Creating ToolBar Button
btnclose = new JButton(new ImageIcon("Images/export.gif"));
btnclose.addActionListener(this);
// Creating Tool Bar
toolBar = new JToolBar();
toolBar.add(btnclose);
try
st=con.createStatement();
rs =st.executeQuery("SELECT BCat from Books Group By Books.BCat");
while(rs.next())
v.add(rs.getString(1));
catch(SQLException ex)
System.out.println("Error");
panel1= new JPanel();
panel1.setLayout(new GridBagLayout());
GridBagConstraints c = new GridBagConstraints();
c.fill = GridBagConstraints.HORIZONTAL;
lblCategory = new JLabel("Category:");
lblCategory.setHorizontalAlignment (JTextField.CENTER);
c.gridx=2;
c.gridy=2;
panel1.add(lblCategory,c);
comboCategory = new JComboBox(v);
comboCategory.addActionListener(this);
c.ipadx=20;
c.gridx=3;
c.gridwidth=1;
c.gridy=2;
panel1.add(comboCategory,c);
lblAuthor = new JLabel("Author/Publisher:");
c.gridwidth=2;
c.gridx=1;
c.gridy=4;
panel1.add(lblAuthor,c);
lblAuthor.setHorizontalAlignment (JTextField.LEFT);
comboAuthor = new JComboBox();
comboAuthor.addActionListener(this);
c.insets= new Insets(20,0,0,0);
c.ipadx=20;
c.gridx=3;
c.gridy=4;
panel1.add(comboAuthor,c);
comboAuthor.setBounds (125, 165, 175, 25);
table = new JTable();
JScrollPane scrollpane = new JScrollPane(table);
//panel2 = new JPanel();
//panel2.add(scrollpane);
splitpane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,panel1,scrollpane);
splitpane.setDividerSize(15);
splitpane.setDividerLocation(190);
getContentPane().add(toolBar,BorderLayout.NORTH);
getContentPane().add(splitpane);
public void actionPerformed(ActionEvent ae)
Object obj= ae.getSource();
if(obj==comboCategory)
String selecteditem = (String)comboCategory.getSelectedItem();
displayAuthor(selecteditem);
System.out.println("Selected Item"+selecteditem);
else if(obj==btnclose)
setDefaultCloseOperation(JDialog.DISPOSE_ON_CLOSE);
else if(obj==comboAuthor)
String selecteditem1 = (String)comboAuthor.getSelectedItem();
displayavailablity(selecteditem1);
//System.out.println("Selected Item"+selecteditem1);
System.out.println("Selected Author"+selecteditem1);
private void displayAuthor(String selecteditem)
try
{ Vector data = new Vector();
rs= st.executeQuery("SELECT BAuthorandPublisher FROM Books where BCat='" + selecteditem + "' Group By Books.BAuthorandPublisher");
System.out.println("Executing");
while(rs.next())
data.add(rs.getString(1));
//((DefaultComboBoxModel)comboAuthor.getModel()).setVectorData(data);
comboAuthor.setModel(new DefaultComboBoxModel(data));
catch(SQLException ex)
System.out.println("ERROR");
private void displayavailablity(String selecteditem1)
try
Vector columnNames = new Vector();
Vector data1 = new Vector();
rs= st.executeQuery("SELECT * FROM Books where BAuthorandPublisher='" + selecteditem1 +"'");
ResultSetMetaData md= rs.getMetaData();
int columns =md.getColumnCount();
String booktblheading[]={"Book ID","Book NAME","BOOK AUTHOR/PUBLISHER","REFRENCE","CATEGORY"};
for(int i=1; i<= booktblheading.length;i++)
columnNames.addElement(booktblheading[i-1]);
while(rs.next())
Vector row = new Vector(columns);
for(int i=1;i<=columns;i++)
row.addElement(rs.getObject(i));
data1.addElement(row);
//System.out.println("data is:"+data);
((DefaultTableModel)table.getModel()).setDataVector(data1,columnNames);
//DefaultTableModel model = new DefaultTableModel(data1,columnNames);
//table.setModel(model);
rs.close();
st.close();
catch(SQLException ex)
}Please check my code and give me some Better Solution
Thank youYou already have a posting on this topic:
http://forum.java.sun.com/thread.jspa?threadID=5143235 -
Work order should not update the fields in PR
Hi Gurus
My requirements is that workorder should not updates the purchasing data fields in PR do not go to the shoping cart. How can make it possible.
Thanks in AdvanceHi,
I am not sure of your requirement clearly but check up the below user exits :-
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
regrds
pushpa -
Login settings will not update the local testing server files
When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
It does however update the Connections file and the login wizard form.
What is the best way to change login settings before uploading site to web server?
Thanks
DanDan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.
-
DYNP_VALUES_UPDATE not Updating the Field on my Dynpro
Hi.
I want to create a dynpro where two fields are. Field 1 allows the user to enter a customer number, field two shall come up with a number that is calculated somehow. The calculation can last up to 20 seconds, so I dont want to make the user waite for this number.. .he shall be able to work with the rest of the dynpro.
Therefore I called the function that does the calcuiation like that:
MODULE user_command_0100 INPUT.
DATA: lv_guid_16 TYPE guid_16.
IF kna1-kunnr IS NOT INITIAL AND kna1-kunnr <> gv_kunnr
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_16 = lv_guid_16.
gv_taskid = lv_guid_16+8(8).
CALL FUNCTION 'YDETERMINE_DEPOTDISTANCE'
STARTING NEW TASK gv_taskid
PERFORMING receive_depent ON END OF TASK
EXPORTING
i_kunnr = kna1-kunnr.
ENDIF.
ENDMODULE.
The next piece of code shall get the returning value if the function wants to return its results.
FORM receive_depent USING i_task TYPE clike.
TABLES: d020s.
DATA: dyname LIKE d020s-prog,
dynumb LIKE d020s-dnum.
DATA: BEGIN OF dynpfields OCCURS 1.
INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
IF i_task = gv_taskid.
RECEIVE RESULTS FROM FUNCTION 'YDETERMINE_DEPOTDISTANCE'
IMPORTING
e_depent = kna1-yydepent
e_accuracy = gv_accuracy.
MOVE 'KNA1-YYDEPENT' TO dynpfields-fieldname.
MOVE kna1-yydepent TO dynpfields-fieldvalue.
APPEND dynpfields.
dyname = sy-cprog.
dynumb = '0100'.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = dyname
dynumb = dynumb
TABLES
dynpfields = dynpfields
EXCEPTIONS
invalid_abapworkarea = 01
invalid_dynprofield = 02
invalid_dynproname = 03
invalid_dynpronummer = 04
invalid_request = 05
no_fielddescription = 06
undefind_error = 07.
ASSERT sy-subrc = 0.
ENDIF.
Problem is: The DYNP_VALUES_UPDATE does not update the field on my dynpro at all. If I hit enter another time, then the field is provided by the value as another PBO will be processed. What is my mistake here?
Regards
Manfred
Edited by: Rob Burbank on Oct 29, 2010 12:07 PMHi Manfred,
Replace all the DYNP_VALUES_UPDATE-related content by the following statement:
SET USER-COMMAND 'xxx'.
While DYNP_VALUES_UPDATE does update the fields, a roundtrip is not triggered so the content of the fields will not be refreshed. The SET USER-COMMAND does that.
Hope this helps you!
Cheers, Roel -
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank youMy programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi -
BAPI_SALESORDER_CREATEFROMDAT2 is not updating the ITEM Qty after Free ITEM
Hi,
I am using BAPI_SALESORDER_CREATEFROMDAT2 to create a order.We have customization for populating a FREE ITEM for a Order ITEM.
Now the Problem is that .....if I am passing more then one Material as ITEM it is not updating the next ITEM Qty and also not populating FREE ITEM afterwords first one.
Please help me.
Regards
RickyHi,
Find below the code :
read table i_table_t into lwa_table_s index 1.
if sy-subrc eq 0.
*Order Header
lwa_ord_head_in-doc_type = 'ZSO'.
lwa_ord_head_in-sales_org = '1000'.
lwa_ord_head_in-distr_chan = '10'.
lwa_ord_head_in-division = '10'.
lwa_ord_head_in-req_date_h = lwa_table_s-delivery.
*Order Header Update
lwa_ord_head_inx-doc_type = 'X'.
lwa_ord_head_inx-sales_org = 'X'.
lwa_ord_head_inx-distr_chan = 'X'.
lwa_ord_head_inx-division = 'X'.
lwa_ord_head_inx-req_date_h = 'X'.
lwa_ord_partners-partn_role = 'AG'.
lwa_ord_partners-partn_numb = lwa_table_s-sold_to.
append lwa_ord_partners to lt_ord_partners.
if lwa_table_s-ship_to is initial.
lwa_ord_partners-partn_role = 'WE'.
lwa_ord_partners-partn_numb = lwa_table_s-sold_to.
append lwa_ord_partners to lt_ord_partners.
else.
lwa_ord_partners-partn_role = 'WE'.
lwa_ord_partners-partn_numb = lwa_table_s-ship_to.
append lwa_ord_partners to lt_ord_partners.
endif.
lt_table_it_t = lwa_table_s-zsd_table_it_t.
loop at lt_table_it_t into lwa_table_it_s.
lwa_ord_items_in-material = lwa_table_it_s-matnr.
lwa_ord_items_in-plant = wa_table_s-plant.
lwa_ord_items_in-target_qty = lwa_table_it_s-qty.
lwa_ord_items_in-comp_quant = lwa_table_it_s-qty.
append lwa_ord_items_in to lt_ord_items_in.
lwa_ord_items_inx-material = 'X'.
lwa_ord_items_inx-plant = 'X'.
lwa_ord_items_inx-target_qty = 'X'.
lwa_ord_items_inx-comp_quant = 'X'.
lwa_ord_items_inx-updateflag = 'I'.
append lwa_ord_items_inx to lt_ord_items_inx.
Schedule Line Information
lwa_schedule_lines-sched_line = 'X'.
lwa_schedule_lines-req_date = lwa_table_s-date_del.
lwa_schedule_lines-date_type = '1'.
lwa_schedule_lines-req_qty = lwa_table_it_s-qty.
append lwa_schedule_lines to lt_schedule_lines.
lwa_schedule_lines_x-updateflag = 'I'.
lwa_schedule_lines_x-sched_line = 'X'.
lwa_schedule_lines_x-req_date = 'X'.
lwa_schedule_lines_x-date_type = 'X'.
lwa_schedule_lines_x-req_qty = 'X'.
append lwa_schedule_lines_x to lt_schedule_lines_x.
endloop.
Here I am getting First Item and it's free configured Item perfectly for the Qty 1.
But when I pass more then 1 Qty or Multiple ITEMS it is not populating other respective free configured ITEMS with them.Also IT is not updating the other ITEM Qty other the first one.
For Example:
Item No ITEM Qty .......
10 ITEM1 1 EA ..........
20 FREE1 1 DAY ..........
30 ITEM2 0 ..........
40 ITEM3 0 .........
In above example After 30 and 40 two Free ITEM should be generated with 1 Day and for Qty 1 EA
Regards
Ricky -
ITunes could not update the carrier settings on your iPhone
When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?Jim VanLeeuwen wrote:
You will find them in separate folders within your user account Library/iTunes folder.
That was it. Somehow the owner of ~/Library/iTunes got changed to root.
Jim VanLeeuwen wrote:
Have you tried using Disk Utility to Repair Permissions?
Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
I manually changed the owner to steve and was able to download and install the carrier settings.
Thanks! -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
Mobile Sync not update the client or remote store after first sync
Subject: OracleLite 9i does not update the client or remote store during synchronization with a Windows CE device
After the first synchronization, neither the client or remote stores are updated on future synchronization when the publication is created with the fast refresh option. If the publication is created with the complete refresh option, the server will update the client, but the client cannot update the server after the first synchronization. That is once the database (.odb) file is downloaded from the server on the first connect, no updates to either the client, or server are performed for a publication created with the fast refresh option, and only the client store is updated when the publication is created with the complete refresh option. These result are obtained whether I use MSync via Microsoft Active Sync, or I use the Embedded VC++ program I wrote to initiate the synchronization from the Windows CE device.
I am 99% sure the JAVA code that I am programmatically creating the publications with, and the Embedded VC++ code for initiating the synchronization from the Windows CE device are correct. Both programs adhere exactly to the example code provided either in the documentation, or in the sample code shipped with OracleLite 9i Release 5.0.1. My conclusion is that there is a problem with Oracles replication programs either on the Windows CE, or Server side, or both. This conclusion on my part is strongly supported by the fact that MSync operating with Microsoft Active Sync behaves exactly the same as my code that initiates the replication from the Windows CE device. Also, by looking through the discussion forum, I gather that others are experiencing similar, if not identical, replication problems.
To support my contention that it is a Oracle problem, I have prepared a simplified version of the Embedded VC++ code to initiate the synchronization for the CE device, and the JAVA code for creating the publication. This code duplicates the problem and is easy to follow. You may download the zip file containing code via the link https://Yggdrasill.cfr.msstate.edu:4443/SyncProblem.htm or the link http://Yggdrasill.cfr.msstate.edu:7778/SyncProblem.htm. This zip contains the Embedded VC++ project files, that will compile and run correctly on a PocketPC with an Arm processor, or the PocketPC x86 emulator when you have the required include files, and libraries in the path. It also includes the JAVA code I used to create the publication. If you extend the VC++ code to run on additional platforms be sure to add the compile flag (directive) /D SQL_NOUNICODEMAP , and the library files olod2040.lib, and ocapi.lib in the library box from Project settings. On my system the paths to the Arm, and x86 libraries are C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\Arm\LIB, and C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\X86EM\LIB, respectively
I am using a NT 4.0 SP6a server with Database 9i Release 2 Enterprise edition, and OracleLite 9i Mobile Server Release 5.0.1. The Windows CE test device is an iPac running Pocket PC, connected to a system running Windows 2000 Professional SP2, and Microsoft Active Sync 3.1.
Please review this problem documentation, and tell me what I am doing wrong, or point me to a location where I can get a patch to fix the problem.
Thanks,
Thomas G.Matney
[email protected]
(662)325-2791Hi,
I'm also facing a similar problem. I'm using Mobile server as stand alone config with Oracle 8i as server database. After the first download, the data updated at the server is not getting downloaded to client(PDA).
How did u overcome this problem? Is there any work around?
I want to do synch using both serial and dial up.
Thanks in advance,
Sri -
BAPI_PO_CHANGE to update the Price for the line item not updating the Price
Hi,
I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
I am passing following data to the BAPI.
Plant: CQ11
PO Material Price
4500002142 TEST_BATCH 12
Please provide suggestion.
Regards,
Jubin.Hi,
check this link...this has sample code
[http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
Regards,
Surinder
Maybe you are looking for
-
Incorrect Language txt Being Displayed
Hi We have recently gone live using ECC 5.0 in a new region, Spain, when the users logon using using ES, certain transactions are showing the text in German, such as transaction S_ALR_87013624 ? Spanish language has been imported 2 years ago and was
-
The screen on my MacBook appears to have a black background like a picture negitive. The original background was changed by my son, and now I cannot change the screen back to a visible display?
-
Custom Infotype with multiple long text fields
Hi, We have a need to create a custom Infotype (in PA or PD) that will contain more than one long-text area. I've searched this forum and found that there are generally two approaches : 1. use the HR clusters for long-text and setting the ITXEX field
-
Access on more than one computer
redemption code will not allow me to install on two computers
-
Any suggestions for a laser all-one, wireless, print, scan, fax printer for my Mac Air? Suggestions gratefully accepted.