Query of capacity availability

hi experts,
I am testing capacity availability check when release work order,
I have done configuration to active this function by T-code:OIOI,
but when release the order, a dialogue pop up
No reqmts/caps exists or not relevant to finite scheduling
and the help text is that:
No reqmts/caps exists or not relevant to finite scheduling
Message no. CY298
Diagnosis
In the capacity availability check either no capacities were found or none were found that were relevant for finite scheduling or no capacity requirements were found.
The possible causes are:
no capacities have been assigned to the work centers checked
in the capacities at the work centers checked the indicator Relevant to finite scheduling is not set. Thus the capacities can have an unlimited load.
no capacity requirements exist for the order checked
System Response
The capacity availability is checked.
Procedure
Assign capacities to the work centers affected by the order.
Set the indicator Relevant to finite scheduling at the capacities in the work centers affected.
Find out why no capacity requirements exist and, if possible, solve the problem.
Carry out the capacity availability check again.
I have checked my work center, I have assigned capacity to work center, and marked the finite scheduling indicator in capacity head screen.
can anyone give some suggestion?
thanks

Hi,
Did you maintianed the Release order condition in OIOI transaction? Pls maintain one of them. And the No check in capacity window of OIOI must be un selected.
And in work center did you maintain the number of capacities. If so it should work.
Regards,
N.Nagaraju

Similar Messages

HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason? I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL. it is WIFI and internet via AT&T??? Can you h

Can anyone help me? Why does my ipad kick me out of FB? Sometimes to the 'settings' page and sometimes to the desk top? I would like to know why this happens and what I can check or change to make it stop. I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL. It is WIFI and internet via AT&T? Can anyone give me some clues on what to do; or change in settings??? Thank you very much!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Reg Capacity used and capacity available

Dear all,
How can I see the capacity available and capacity used for a particular resource for previous month , is there any standard report available in standard SAP.
Regards
madhav

Try transaction MCP7

Unable to Transport Querys Object (ELEM) of type 'Query' is not available in version 'A'

Hi,
We need to transport some querys from production BW 7.3.1SP7 to synch with Dev. I know, I know but had no choice but to created querys in PBW due to no data in DEV...
In RSA1, we collect query and get errors for every object (ckf,rkf, vars etc) and when changing dsiplay from hiearchy to list, there are no objects included under the query element.
Opened the system in SCC4 for automatic recording of changes and changes to repository and cross clinet customization allowed and changed the client role to Test.
Tried opening and resaving the query in query designer.
Query is active in table RSRREPDIR
Checked SCN and OSS have yet to find a solution
http://scn.sap.com/thread/1758171
http://scn.sap.com/thread/1623756
Here are the error details
Object '4T3M5JI7050ENPG6G336XWYNK' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '4T3M5JI7050ENPG6G336XWYNK' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thank you so much for your time!
Lee Lewis

This is an SAP BUG which is corrected by this note:
> 1762785 - Object '!XYZ...' (ELEM) of type Query is not available.
> 1816332 - Object 'XYZ...' (ELEM) cannot be collected (RSO296)
Lee Lewis

System status for capacity availability in Process order

Hi,
I have activated the capacity availability check in SPRO to have a capacity check while process order creation.
But system doesnt provide any status in the process order for this. No status is appearing even if I do a manual capacity check in process order.
Is there any system status for capacity is available?.
Thanks in advance
Prathib

Hi Prathib
System will be give any status if capcity is available, but it will give a status MSCP if there is Capacity shortage.
Rgds
UK

ATP based on material and capacity availability

Hi Experts,
Is there a way to implement ATP with finite capacity availability and material availability in a Make to stock (MTS) environment in R/3? In other words, when a sales order is created for a material, the confirmation date that is recd. should be based on Capacity and Material availability. What planning strategy would you use?
I understand that this can be implemented in assembled to order environment (planning strategy 82 or 83), but my question is more related to MTS environment.
Regards,
Praveen

Hi Praveen,
SAP recommends APO as a solution for your scenario. Check out their documentation on Capable to Promise (CTP) under
http://help.sap.com/saphelp_scm2007/helpdata/en/64/7294375960a42be10000009b38f8cf/frameset.htm
This is not a trivial implementation. You need to be sure that this is what your business wants before you embark on the change.
Regards,
Bruce

Capacity availability check

Hi All,
I need to check the capacity availability for a person who assigned to workcenter which is assigned to the activity in the network. I maintained the cap.planning profile for network order type.
I have created 2 activity under the same network and assigned the same person to those activities. If i do check the capcity it always saying ALL THE CAPACITIES ARE AVAILABLE.Eventhough there is a capacity overload.
PLease tell me what i shall i do...
Thanks

Hi ALl,
I want to do capacity availability check for network. can you please explain waht are all the steps to be followed.....
Thanks

Capacity availability check during prod order creation

When i create many production order for a particular material with different huge quantities , while doing capacity availability check system issues a message *" No reqmts/caps exists or not relevant to finite scheduling*
Here as per the message i have checked all the possible errors and everything is fine.
As per actual requirements, work centers are overloaded. But here system displays that all work centers are available.
Any help regarding this.

Dear Nandi,
Please refer the below link,
No reqmt/capacity exist or not relevnt for finite scheduling: Mesage: CY298
Regards,
Sundhu

Auto Material & Capacity Availability check when releasing Production Order

Dear Experts,
Is there any configuration in Production Planning that will automatically check material availability and capacity availability automatically when a Production Order is released?
Meaning to say, users will not need to manually click on the Check Material Availability and Check Capacity Availability button.
Please advise.
Thanks in advance.

Hi,
I've solved the problem. Just maintain the config in transaction OPJK.
Thanks

Capacity planning: capacity available at all workcenters

Dear all,
We have configured all the requirement for capacity availability check. the planned order is showing overload of capacity. but while doing conversion and checking in production order i am getting "capacity available at all work centers, which is actually overloaded.
Can anyone suggest how to resolve this?
Regards,
Sharmila

Sharmila,
I will assume this is a new implementation. Have you calculated the basic load yet?
http://help.sap.com/erp2005_ehp_06/helpdata/EN/60/13e30b133a11d3bf550000e83235ee/frameset.htm
http://help.sap.com/erp2005_ehp_06/helpdata/EN/60/13e314133a11d3bf550000e83235ee/frameset.htm
Best regards,
DB49

Capacity availability

HI Friends,
i am facing a problem in capacity planning, while checking capacity for an order i am receiving the following error. i have given SAPSFCG015 (SFC: Evaluation, standard overview) as the overall profile in production schedular profile and in availability check, checking control. please give solution
The profile entered for the capacity availability check is not suitable
Message no. CY297
Diagnosis
The control profile for the overall profile in the capacity availability check has not been correctly defined.
Procedure
Correct the control profile as follows:
presentation: 4 (capacity availability check)
layout type: 1 (display per period).

Check your settings in transaction OPJK
Note 160613 explains them.
best regards

Trying to create a FMS query that shows available stock quantity on each Sales Order line

Using SAP B1 v 8.82
I realize that I may be going about this in completely the wrong way. Here's my code:
SELECT (T0.OnHand - T0.IsCommited + (SELECT SUM(ISNULL(T3.U_BO, 0)) FROM RDR1 T3 INNER JOIN OITM T4 ON T4.ItemCode = T3.ItemCode WHERE T3.U_BO > 0 AND T3.ItemCode = $[RDR1.ItemCode])) [available]
FROM OITW T0
INNER JOIN RDR1 T1 ON T1.ItemCode = T0.ItemCode
INNER JOIN ORDR T2 ON T2.DocEntry = T1.DocEntry
WHERE T0.WhsCode = 'ATL' AND T1.WhsCode = 'ATL' AND T2.DocNum = $[ORDR.DocNum] AND T1.LineNum = $[RDR1.LineNum]
GROUP BY T0.OnHand, T0.IsCommited
There is a UDF that I call upon in the RDR1 table called BO. I created this field so that if a person wants to wait for a new batch they can "backorder" it. In another UDF called "Available" I set up a user-defined value based on the above query. The end result should be that whenever someone enters an item, the query finds the level of stock in the warehouse, subtracts the amount already committed, and adds back in any backorder quantities on other orders for the same item. For example, say there's 1000 units of ITEM1 in stock, 2000 are ordered on SO # 1 and 500 are ordered on SO # 2. The salesperson who created SO # 1 wants to wait for a new batch and types "2000" in the BO field. I try to enter a new SO # 3 for 300 pieces. When I key in ITEM1 on the first line, the field "Available" should update to say "500" (1000 - 2500 + 2000 = 500).
It seems to be working, but only after the document is added. In the example above I enter SO # 3 with a qty of 300 and when I go back to that SO I see that "Available" shows 200. Ideally I'd like to see it say 500 while I'm working in the SO before I add it.

Edit2: Okay it so it works fine for any items that have a history, but it seems that if the item hasn't ever been on a Sales Order (i.e. it's not found in the RDR1 table) I get "no data found". How can I make it simply return OnHand - IsCommited if it doesn't exist in the RDR1 table, but do the below query if it does?
Actually that's not true. I've got it working now. I changed the query a bit and the update trigger, and it feels like it's working exactly like I wanted. Query below if you're interested.
/*Available FMS Sales Orders*/
SELECT (T0.OnHand-T0.IsCommited+(SELECT SUM(ISNULL(T3.U_BO, 0)) FROM RDR1 T3 WHERE T3.ItemCode = $[RDR1.ItemCode]))
FROM OITW T0
INNER JOIN RDR1 T1 ON T0.ItemCode = T1.ItemCode
WHERE T1.ItemCode = $[RDR1.ItemCode] AND T1.WhsCode = 'ATL' AND T0.WhsCode = 'ATL'
I have it on Auto Refresh - When Field Changes "Document Total" - Refresh Regularly.
Edit1: fixed grammatical error.

I recently upgraded from Leopard to Snow Leopard and I noticed that I have more capacity available on the Macintosh HD. I checked my files and applications and they are still on my computer. Can capacity on the HD change after an OS upgrade?

I recently upgraded from Leopard to Snow Leopard on my MacBook and I noticed that I have more capacity on the Macintosh HD than before the upgrade. I checked my files and applications and they are still on my computer and nothing appears to be missing. Before the upgrade I had around 111 GB capacity with around 10.50 GB available on the Mac HD but now after the upgrade I have 119 GB capacity and 20.92 GB available. Can capacity on the HD change after an OS upgrade?

No, but the upgrade removed unneeded PowerPC code and changed the way free space is determined.
(72071)

Query.setRange() not available on standard javax.jdo.Query interface?

Hi Kodo people, I'm trying out Kodo 3.2.0, most specifically for the
spiffy new setRange() functionality. However, I'm somewhat confused
because while the docs clearly indicate that the setRange() method is
available on the standard javax.jdo.Query interface, it's not available
on the javax.jdo.Query class that ships with Kodo 3.2.0. I have to cast
my query to a KodoQuery in order for this to work. Is this expected?
Thanks,
-Mike
Michael Allen
Technical Lead
PGP Corporation

I think you missed the note at the beginning of the query chapter in the docs:
Much of the functionality we discuss in this chapter is new to JDO 2. Though
Kodo supports all of the features defined in the following sections, many JDO
implementations may not. Additionally, because official JDO 2 jars are not yet
available, you will have to cast your query objects to kodo.query.KodoQuery to
access any JDO 2 APIs. The UML diagram above depicts these APIs in bold. For
simplicity, casts have been left out of the example code throughout the chapter.

[PM] - Work order (shifted) capacity availability check

Hi all,
I've created a shifted capacity work center (1 person) and attributed to it a planning intervals:
As you see, this person is available during the first shift on Sunday (07.08.2014)
I've tried to see if SAP will check the availability of this work center in the IW31 menu by planifying a WO in a non availability time of this work center (interval 4PM - 8PM)
But SAP mention that capacities are available
Could SAP check the availablity of persons
(sorry for my English)

Hi Anand,
That's why I'm talking about finite scheduling, the example that I've put in the start of this topic shows that:
- The technician is available by default from 3PM to 11PM (capacity)
- Specially, on the 07.09.14 (the last day of the inteval), the technician was declared available from 7AM to 3PM
In the work order, i've requested a job from 4PM to 8PM (normally the technician will not be available in this interval)
But as an output, SAP shows that the capacities are available (in this case, SAP refers to the default capacity and not the special interval..)
So i wonder to know how SAP could deep analyse the availability interval of every capacity (taking on consideration intervals)
@Kaushik: The 3rd screen capture shows "person responsible" that is different from the work center (MT-MED)..
Waiting for your reply guys !
Regards

Query of capacity availability

Similar Messages

Maybe you are looking for