Query of Queries Error

I am using the same datasource to create a query of queries
but one of my queries is not being recognized. The code and error
message are as follows:

You don't use the datasource property with a query of query
<cfquery...>
tag. When you do query of query you are dealing with record
sets in
memory. Drop the 'datasource' parameter in the third
<cfquery...> tag.

Similar Messages

Query Of Queries : Error When Trying To Fake Left Outer Join

Hi there
I am trying to replicate a left outer join, combining two query of queries using a method I located here
However, I keep getting an error message..
Here is the code I am using....
    <cfquery dbtype="query" name="qry">
                SELECT *
                FROM returnQry, returnQry2
                WHERE returnQry.mediumImage = returnQry2.mediumImage
                ORDER BY returnQry.name
            </cfquery>
            <cfquery name="returnQry3" dbtype="#application.mx#">
                SELECT *
                FROM trackmeanings AS t
            </cfquery>
           <cfquery dbtype="query" name="endQry">
                SELECT name,nameRcd,mediumImage, COUNT(sMessage) AS comments
                FROM qry, returnQry3
                WHERE qry.name = returnQry3.sNameTrack
                UNION
                SELECT name,nameRcd,mediumImage, COUNT(sMessage) AS comments
                FROM qry, returnQry3
                WHERE #qry.name# NOT IN (#QuotedValueList(returnQry3.sNameTrack)#)
                GROUP BY name,nameRcd,mediumImage
            </cfquery>
When I try to use the query output in a page, i get the error message "Incorrect conditional expression, Expected one of [like|null|between|in|comparison] condition"
Would anyone have any ideas?
Many thanks

Actually , spoke a little too soon, my query now seems to be outputting duplicates when the value is found on both sides of the union, my group by clause doesnt seem to be eliminating them like it usually does.
My SELECT code now reads
<cfquery dbtype="query" name="endQry">
SELECT name,nameRcd,mediumImage, COUNT(sMessage) AS comments
FROM qry, returnQry3
WHERE qry.name = returnQry3.sNameTrack
GROUP BY name,nameRcd,mediumImage
UNION
SELECT name,nameRcd,mediumImage, 0 AS comments
FROM qry
WHERE qry.name NOT IN (<cfqueryparam
value="#returnQry3.sNameTrack#"
cfsqltype="cf_sql_varchar"
list="yes"
/>)
GROUP BY name,nameRcd,mediumImage
ORDER BY name DESC
</cfquery>
and my ouput...is producing duplicates
<cfoutput query="rc.qryTopTracks" group="name">
#rc.qryTopTracks.name#
</cfoutput>
Would you have any idea of how to eliminate them here? Thanks

Coldfusion query of queries error

I have a long query named "Results.Itinerary" in a CFC which
I have to add this query to.
<CFLOOP QUERY = "Results.Itinerary">
<CFQUERY NAME = "GetPorts" DATASOURCE="x">
SELECT *
FROM Itinerary_Ports
WHERE (ItineraryID = #ItineraryID#)
AND (Name NOT LIKE '%At Sea%')
</CFQUERY>
<CFSET ThisPortList = ValueList(GetPorts.Name)>
<CFSET QuerySetCell(Results.Itinerary,
"PortList","#ThisPortList#", CurrentRow)>
</CFLOOP>
Now this query below gives me an error, I know I need to have
the single quotes around PortList for it to work , but coldfusion
is getting confused and throwing errors.
<cfquery name="Search.Results.ThisShip" dbtype="QUERY">
SELECT *
From Search.Results.Itinerary
Where ShipID = #ShipID#
AND NumberOfNights = #NumberOfNights#
AND PortList = '#PortList#' < - Coldfusion will sometimes
get screwed up on this line.
ORDER BY DepartureDate ASC
I need to know a different way to write this. Thanks.

Thanks to you and Dan. I think the key was getting rid of the
apostrophies that coldfusion added. I still dont know if its a
QuerySetCell that adds them or what, but having them makes
problems.
Here is what I did to fix it
In the query I used QuotedValueList and used a delimiter.
Then I stripped out the apostrophies that coldfusion added.
Then I reset the QuerySetCell with the apostrophies removed.
<CFLOOP QUERY = "Results.Itinerary">
<CFQUERY NAME = "GetPorts" DATASOURCE="Cruises">
SELECT *
FROM Itinerary_Ports
WHERE (ItineraryID = #ItineraryID#)
AND (Name NOT LIKE '%At Sea%')
</CFQUERY>
<CFSET ThisPortList =
QuotedValueList(GetPorts.Name,";")>
<CFSET QuerySetCell(Results.Itinerary,
"PortList","#ThisPortList#", CurrentRow)>
<cfset a = replace(PortList,"'","","all")>
<CFSET QuerySetCell(Results.Itinerary, "PortList","#a#",
CurrentRow)>
</CFLOOP>
The next part I did was the "PortList IN ('#PortList#'). "
SELECT *
From Search.Results.Itinerary
Where ShipID = #ShipID#
AND NumberOfNights = #NumberOfNights#
AND PortList IN ('#PortList#')
ORDER BY DepartureDate ASC

Can't find answer to Query Of Queries runtime error

Not only I browsed this forum but also googled this problem but unfortunnately I have no luck in finding the answer.
All I did was writing this simple query:
<cfquery name="test" dbtype="query">
select SSN,BirthDate from myquery where SSN <> '' OR BirthDate <> ''
</cfquery>
and I got this error:
Query Of Queries runtime error.
Comparison exception while executing <>.
Unsupported Type Comparison Exception: The <> operator does not support comparison between the following types:
Left hand side expression type = "DOUBLE".
Right hand side expression type = "STRING".
I tried the following and did not work either, still got the same error.
<cfquery name="test" dbtype="query">
select SSN,BirthDate from myquery
where SSN <> <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value=""/>
OR BirthDate <> <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value=""/></cfquery>
Has someone ever encountered the same problem and know how to solve it?

HELP ! ! ! Going into testing soon. I need this to work to get correct report results ! ! ! !
My issue seems similar to the one under discussion and the reply from lawhite01 caught my eye. Can you roll my issue into this discussion?
This is a 2 parter. The second part is the QoQ part, but the 1st part has a line in the query that is similar to the QoQ one and it uses the same data. Part 1 also throws an error.
PART # 1.
I'm trying to use a query table created through QueryNew and then query it.
I need multiple columns in the query table I create:
<cfscript>
        tot_AllCurrentDraftListing = QueryNew("AnnounceNum, JP_PDLoc, JP_JS_Title, JP_JS, JP_KW_1, JP_JobTitle, JP_Open, JP_Close, JP_CloseType, JP_CloseName, JP_PosNeed, JP_DirectHire, JP_Desc, JP_Draft, JP_Archived, JP_State, JP_AreaName, JP_AreaID, JP_AreaAlias, JP_Fac_SU, JP_Fac_Facility, JP_FAC_ID, JP_Grade1, JP_sal_low1, JP_sal_high1, JP_Grade2, JP_sal_low2, JP_sal_high2, JP_Grade3, JP_sal_low3, JP_sal_high3, JP_Grade4, JP_sal_low4, JP_sal_high4, JP_Grade5, JP_sal_low5, JP_sal_high5, JP_Posted, JP_TypeHire, JP_HRemail");
    </cfscript>
Then I populate all the cells of the query table.
Then I set up to use the created query table.
I do this first:
    <cfquery name="qAltPostID" datasource="#at_datasource#">
         SELECT AltPoster, fk_Job_AnnounceNum
         from JOB_JPContacts
         Where AltJPContactType = 'AltPosterID'
         and AltPoster = '#session.IHSUID#'
         </cfquery>
Then, in my first query using the created query, I expect to need to choose from multiple values, so I'm using this line in the query (this is NOT a QoQ query):
          and AnnounceNum IN (<cfqueryparam cfsqltype="CF_SQL_varchar" value="#ValueList(qAltPostID.fk_Job_AnnounceNum)#">)
I've also tried:
               and AnnounceNum IN (#ValueList(qAltPostID.fk_Job_AnnounceNum)#)
and:
             and JOB_AnnounceNum IN
                SELECT fk_Job_AnnounceNum
                from JOB_JPContacts
                Where AltJPContactType = 'AltPosterID'
                and AltPoster = '#session.IHSUID#'
ERROR is: one record should return. I get 0.
PART # 2: Here's the QoQ part.
I get the error:
Query Of Queries runtime error.
Comparison exception while executing IN.
Unsupported Type Comparison Exception: The IN operator does not support comparison between the following types:
Left hand side expression type = "LONG".
Right hand side expression type = "STRING".
A tutorial I found gave an example using only one column for this part of the fix:
     tot_AllCurrentDraftListing = QueryNew("AnnounceNum", "CF_SQL_VARCHAR")
How would I set up the query with the datatype when I'm using multiple columns:
<cfscript>
        tot_AllCurrentDraftListing = QueryNew("AnnounceNum, JP_PDLoc, JP_JS_Title, JP_JS, JP_KW_1, JP_JobTitle, JP_Open, JP_Close, JP_CloseType, JP_CloseName, JP_PosNeed, JP_DirectHire, JP_Desc, JP_Draft, JP_Archived, JP_State, JP_AreaName, JP_AreaID, JP_AreaAlias, JP_Fac_SU, JP_Fac_Facility, JP_FAC_ID, JP_Grade1, JP_sal_low1, JP_sal_high1, JP_Grade2, JP_sal_low2, JP_sal_high2, JP_Grade3, JP_sal_low3, JP_sal_high3, JP_Grade4, JP_sal_low4, JP_sal_high4, JP_Grade5, JP_sal_low5, JP_sal_high5, JP_Posted, JP_TypeHire, JP_HRemail");
    </cfscript>
I used this code after all the cells contained values and before running my QoQ query:
        <cfloop index="intID" from="1" to="#tot_AllCurrentDraftListing.recordcount#" step="1">
            <cfset tot_AllCurrentDraftListing["AnnounceNum"] [intID] = JavaCast("string", intID) />
        </cfloop>
          Is that correct?
Thanks.
Whoever can help me with this should be awarded extra points ! ! ! !

Query Of Queries syntax error.

Hi all,
I have the following query:
<cfquery name="agent" datasource="datasourcename">
SELECT * FROM quotes where status = 'Pending'
<cfif isDefined("form.agent")>
AND agent = '#FORM.agent#'
</cfif>
</cfquery>
Then, I have the following query of that query
<cfquery name="totalvalue" dbtype="query">
SELECT SUM(value) as total FROM agent
</cfquery>
however I get the following error:
Query Of Queries syntax error.
Encountered "SUM ( value. Incorrect Select List,
on line 20 which is:
<cfquery name="totalvalue" dbtype="query">
now i'm sure this is identical to what ive used before but
getting the error. the totals query works fine when querying the
database direct, only got this error when I changed it to query the
master query.
i appreciate any help in advance, as no matter how much i
stare at it I can't see whats wrong!

I believe that
value is a reserved word that is probably causing your
current error. I would rename this column, or alias it in your
original query. Also, I would add WHERE value IS NOT NULL to your
Q-of-Q to cover your NULLs.
Phil

Query of Queries Runtime error

I have a query pulled from an XML file, with a column that
contains mixed numeric and alphanumeric strings, like 103, 112,
A12,
etc.
When running a QofQ on this query, I get this error:
Query Of Queries runtime error.
Can't convert the string A1 to java type LONG
Apparently, according to a livedocs comment I found here
http://tinyurl.com/y24qda
=====
if the column's value in the first row of the recordset is
something that is all numeric, like: 123456 When an all-numeric
value
like this is encountered as the first value, CF assumes that
ALL values in that column are numeric... thus, it errors out if it
comes accross a record containing both numbers and letters,
since a mix of letters and numbers will be considered a string.
=====
Is there any known way around this?
Michael Evangelista
Evangelista Design
www.mredesign.com

Yes, running CFmx7... didnt stop to think this might be
different in each, but found something to that effect last night...
also, Dan's link gave me a clue... thanks.
Michael Evangelista
Evangelista Design
www.mredesign.com
"Adam Cameron" <[email protected]> wrote in message
news:[email protected]..
>> Ok.. will do, thanks
>
> Note that the advice Dan gives is specific to CFMX7,
whereas it seems you
> have been looking at the CFMX6 documentation... which
version of CF are you
> running?
>
> --
> Adam

Problem using DECODE() function with a Query of Queries

I
posted
on my blog about an issue I was having trying to use the PL/SQL
DECODE() function with a Coldfusion Query of Queries. This function
works fine when you query a database for information. However, when
you query another query, it seems that CF doesn't recognize it. I
got errors stating that it found a left parenthesis where it
expected a FROM key word. Here is a simplified version of what I am
trying to do:
quote:

<cfscript>
qOriginal = queryNew("Name,Email,CountryCode",
"VarChar,VarChar,VarChar");
newRow = queryAddRow(qOriginal, 5);
querySetCell(qOriginal, "Name", "Joe", 1);
querySetCell(qOriginal, "Email", "[email protected]", 1);
querySetCell(qOriginal, "CountryCode", "AMER", 1);
querySetCell(qOriginal, "Name", "Sally", 2);
querySetCell(qOriginal, "Email", "[email protected]", 2);
querySetCell(qOriginal, "CountryCode", "AMER", 2);
querySetCell(qOriginal, "Name", "Bob", 3);
querySetCell(qOriginal, "Email", "[email protected]", 3);
querySetCell(qOriginal, "CountryCode", "ASIA", 3);
querySetCell(qOriginal, "Name", "Mary", 4);
querySetCell(qOriginal, "Email", "[email protected]", 4);
querySetCell(qOriginal, "CountryCode", "EURO", 4);
querySetCell(qOriginal, "Name", "John", 5);
querySetCell(qOriginal, "Email", "[email protected]", 5);
querySetCell(qOriginal, "CountryCode", "EURO", 5);
</cfscript>
<cfquery name="qCountries" dbtype="query">
SELECT DISTINCT(CountryCode) AS CountryCode,
DECODE(states, "AMER", "North America & Canada",
"EURO", "Europe & Africa", "ASIA", "Japan &
Asia","") CountryName
FROM qOriginal
ORDER BY CountryCode
</cfquery>
<cfdump var="#qCountries#">

So running this returned the following error:
Query Of Queries syntax error.
Encountered "(. Incorrect Select Statement, Expecting a
'FROM', but encountered '(' instead, A select statement should have
a 'FROM' construct.
Does anybody know why this doesn't work? Is it just not
supported? Please note that I have also tried to use the CASE()
function instead of DECODE() and that resulted in basically the
same error. For now I an looping over my distinct query with a
switch statement and manually loading a new query with the data how
I want it. But it would be a lot cleaner and less code to have the
DECODE() to work. Thx!

DECODE() is an Oracle function, not generic SQL. Q-of-Q is a
very limited subset of SQL and lacks many functions and clauses
available in standard SQL, especially what you may be used to using
in your particular RDBMS.
See
Query
of Queries user guide
Phil

SQL 2012 SP1 - How to determine a query that causes Error 8623 in SQL Log: The query processor ran out of internal resources and could not produce a query plan. This is a rare event...

We are getting multiple 8623 Errors in SQL Log while running Vendor's software.
How can you catch which Query causes the error?
I tried to catch it using SQL Profiler Trace but it doesn't show which Query/Sp is the one causing an error.
I also tried to use Extended Event session to catch it, but it doesn't create any output either.
Error:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that
reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Extended Event Session that I used;
CREATE EVENT SESSION
overly_complex_queries
ON SERVER
ADD EVENT sqlserver.error_reported
ACTION (sqlserver.sql_text, sqlserver.tsql_stack, sqlserver.database_id, sqlserver.username)
WHERE ([severity] = 16
AND [error_number] = 8623)
ADD TARGET package0.asynchronous_file_target
(SET filename = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xel' ,
metadatafile = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xem',
max_file_size = 10,
max_rollover_files = 5)
WITH (MAX_DISPATCH_LATENCY = 5SECONDS)
GO
-- Start the session
ALTER EVENT SESSION overly_complex_queries
ON SERVER STATE = START
GO
It creates only .xel file, but not .xem
Any help/advice is greatly appreciated

Hi VK_DBA,
According to your error message, about which query statement may fail with error message 8623, as other post, you can use trace flag 4102 & 4118 for overcoming this error. Another way is looking for queries with very long IN lists, a large number of
UNIONs, or a large number of nested sub-queries. These are the most common causes of this particular error message.
The error 8623 occurs when attempting to select records through a query with a large number of entries in the "IN" clause (> 10,000). For avoiding this error, I suggest that you could apply the latest Cumulative Updates media for SQL Server 2012 Service
Pack 1, then simplify the query. You may try divide and conquer approach to get part of the query working (as temp table) and then add extra joins / conditions. Or You could try to run the query using the hint option (force order), option (hash join), option
(merge join) with a plan guide.
For more information about error 8623, you can review the following article.
http://blogs.technet.com/b/mdegre/archive/2012/03/13/8623-the-query-processor-ran-out-of-internal-resources-and-could-not-produce-a-query-plan.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Using NVL in Query of Query resulting in error

I'm still using CF8 and Oracle 11G back-end.
When I use NVL in the query of query I got error....Can't I use NVL to check on null value? Please help
Here is my codes:
<cfquery name="GetC2" datasource="#Trim(application.OracDSN)#">
     SELECT CamID2, rel2_2,p_ln2,p_fn2,ins,l_year
     FROM prt_temp
     WHERE Ins = 'CC'
     AND l_year = '1481'
AND NVL(Child_LN2,' ') <> ' '
AND NVL(Child_FN2,' ') <> ' '
    </cfquery>
<cfif GetC2.Recordcount NEQ 0>
<cfquery name="CheckRel2C2" dbtype="QUERY">
SELECT CamID2, rel2_2
FROM GetC2
WHERE NVL(Rel2_2,' ') <> ' '
AND NVL(p_ln2,' ') = ' '
AND NVL(p_fn2,' ') = ' '
AND Ins = 'CC'
AND l_year = '1481'
</cfquery>
</cfif>
The error:
Error Executing Database Query.
Query Of Queries syntax error.
Encountered "NVL ( Rel2_2 ,. Incorrect conditional expression, Expected one of [like|null|between|in|comparison] condition,

NVL is an Oracle function, and is not available in ColdFusion Query of Query. If you are trying to check for null values, then use IS NULL or IS NOT NULL. So
WHERE NVL(Rel2_2,' ') <> ' '
    AND NVL(p_ln2,' ') = ' '
    AND NVL(p_fn2,' ') = ' '
becomes
WHERE Rel2_2 IS NOT NULL
    AND p_ln2 IS NULL
    AND p_fn2 IS NULL
-Carl V.

Query of Queries problem

Over the past several weeks we've been experiencing periodic
hangs of the ColdFusion service. We finally invested in SeeFusion
and found the problem, but aren't sure how to fix it
The code that hangs is a query of queries block. Basically we
are getting a result set from verity (~1000 rows), then getting a
result set from SQL server (~3000 rows), and joining the two with
the query of query statement. Everything will run fine for a few
hours, then that block of code will bog down. When I dumped the
threads during the error, everything gets hung like so:
"jrpp-255" runnable
at
coldfusion.sql.imq.rttExpr.guesstimateJavaType(rttExpr.java:439)
at
coldfusion.sql.imq.rttExpr.guesstimateJavaType(rttExpr.java:371)
at
coldfusion.sql.imq.imqTable.guessColumnType(imqTable.java:443)
at
coldfusion.sql.QueryTableMetaData.InferMetaDataTypes(QueryTableMetaData.java:350)
at coldfusion.sql.imq.TableList.validate(TableList.java:166)
at
coldfusion.sql.imq.rttSelectExprSpec.validate(rttSelectExprSpec.java:498)
at
coldfusion.sql.imq.rttSelectStmt.validate(rttSelectStmt.java:84)
at
coldfusion.sql.imq.jdbcStatement.fetchResult(jdbcStatement.java:538)
at
coldfusion.sql.imq.jdbcStatement.execute(jdbcStatement.java:131)
at coldfusion.sql.Executive.executeQuery(Executive.java:775)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:240)
at
coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:500)
at
cfauctionManagement2ecfc978963305$funcJOINAUCTIONSTOVERITY.runFunction(D:\inetpub\wwwroot \CustomTags\mysite\component\auctionManagement.cfc:137)
at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344)
at
coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47)
at
coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290)
at
coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254)
at
coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56)
at
coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207)
at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:366)
at
coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:198)
at
coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:157)
at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:1594)
at
coldfusion.tagext.lang.InvokeTag.doEndTag(InvokeTag.java:341)
at
cfact_search_auctions2ecfm1040202400._factor47(D:\inetpub\wwwroot\CustomTags\mysite\actio n\act_search_auctions.cfm:849)
at
cfact_search_auctions2ecfm1040202400.runPage(D:\inetpub\wwwroot\CustomTags\mysite\action\ act_search_auctions.cfm:1)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.filter.CFVariablesScopeFilter.invoke(CFVariablesScopeFilter.java:63)
at
coldfusion.tagext.lang.ModuleTag.doStartTag(ModuleTag.java:255)
at
coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:1925)
at
cfindex2ecfm1952396859.runPage(D:\inetpub\wwwroot\mysite\cfml\auctions\index.cfm:18)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at
coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915)
at
cflas2dvegas2dtimeshares2ecfm1477369516.runPage(D:\inetpub\wwwroot\mysite\cfml\las-vegas- timeshares.cfm:1)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
...etc
I believe this means CF is trying to "guesstimate" the java
type of each column in the result set. We tried to work around that
by CASTing each column as a varchar, but we still have the same
issue.
If anyone has an idea what the problem could be, we'd really
appreciate any help. Also, if anyone can suggest a way to merge the
two result sets without using SQL, that would be great too. I've
already tried nested loops to manually build the final result set,
but that was taking up to 5 seconds to run.
Environment:
CFMX 7.0.2
Win2K
SQL Server 2K

> We need more information than that to display a record,
so we select
> everything out of the database (which is fairly quick),
then JOIN that to the
> verity results (WHERE auctionID = KEY).
Right. And what do you need THOUSANDS of matches for, in one
hit, here?
And what do you need ALL those columns for, when dealing with
all these
thousands of rows. You've not really answered my question as
to "what's
the end result here?" What are you trying to achieve? I don't
mean what
you're doing to aggregate the data, but simply *why*? What is
the
requirement you have here to be engaging in this enterprise
in the first
place? Search screen? Stock control report? What?
Is there any way of optimising how much processing you're
doing?
If - say - you're doing a search results screen, you probably
don't need
1000s of results: you probably need 20. So just ask the DB
for 20: WHERE
id IN (#list of 20 IDs from Verity search results#)
If the user goes "NEXT >>", then grab the next 20
(cache the Verity query
somehow, rather than re-query it).
Obviously there's some heavy-lifting processing that might
need to process
the whole lot. Can this not be done in a sliding window of
results? Or
could you not pass the list of IDs from the Verity resultset
into the DB
somehow, and do the filtering on the DB engine, rather than
with CF (which
is not very good at bulk data processing, as you're seeing.
It's not what
it's designed for).
I find QoQ to be very flaky for all ut the most basic
operations. For
basic stuff it's fine. It does not surprise me that it seems
to leak
memory (or whatever it's doing) and eventually give up the
ghost. This
does not help you, I realise, but as a suggested practice:
don't expect too
much out of QoQ. Try some other method instead.
Adam

Query of queries disallows SQL right() function

We're attempting to do a query of queries using the SQL
right() function like this:
select *
from getresults
where right([key],charindex('\',reverse([key]),1)-1) not in
(#quotedvaluelist(getexcluded.file_name)#)
We've even replaced that where clause with a much more simple
where right([key])='m'
just to make sure that it wasn't the nesting functions that
were causing the problem.
In either case, we get the error:
Query of Queries syntax error.
Encountered "right" at line 0, column 0. Incorrect
conditional expression,
Expected one of [like|null|between|in|comparison] condition,
What SQL functions are disallowed from query of queries?
Thanks,
Kris

Nasty stuff huh. Just happened to discover myself today that
Left doesn't work. I'd suspect that Aggregate functions are the
ONLY ones that will work. It would have been nice if they'd at
least allowed CF vs DB functions in their own "database" language.
BTW, also discovered that Count() returns Null rather than 0
when there aren't any per your WHERE clause.

Bug in CF11 regarding Query of queries syntax?

So I have decided to try CF11 because of an official outstanding CF10 bug.
Once I installed CF11, I get an error when running code like this:
<cfquery name="LOCAL.stat_questions" datasource="#APPLICATION.dsn#">
     SELECT     survey_questionID
     FROM     tbl_survey_questions
</cfquery>
<cfset LOCAL.this_statID = 1>
<cfquery name="LOCAL.subset" dbtype="query">
     SELECT     survey_questionID
     FROM          [LOCAL].stat_questions
     WHERE     survey_questionID = <cfqueryparam cfsqltype="cf_sql_numeric" value="#LOCAL.this_statID#">
</cfquery>
The error I receive is: "Query Of Queries syntax error.
Encountered ";. "
If I remove the semi-colon... No error! Is this a bug, or was the semi-colon always bad, but just ignored?
Thanks

I just always put it in out of habit from typing out actual MySQL queries (non QoQ). Never was a problem and I always did it. Now running CF11... it requires fixing. Thought it was strange.
I actually didn't even notice that the semi-colons weren't required in QoQ until I ran into this CF11 bug. I also notice the semi-colon isn't necessary for a MySQL query either in cfquery! Seems weird that it accepts them, but isn't required. Just ignores them?

Coldfusion 7 query of queries

I am getting this error when trying to run a query of queries
on a query constructed with QueryNew(): The value "" cannot be
converted to a number
My hosting company recently upgraded to Coldfusion 7 and this
is when the error began. It worked fine before this and I have not
been able to figure out what to do to correct the issue.
I have dumped the query that I am constructing with QueryNew
and beside some values being null the query looks fine. I don't
think having some null fields should pose a problem.
Any ideas?

Try inserting the word null instead of an empty
string.

Query of queries problem or bug

Hello Everyone,
I have used cfdirectory to get a list of files. As the result
I receive query with the files.
Then I want to search it using query of queries. I' ve found
a problem and I wonder if it is a bug of Coldfusion or perhaps
wrong usage of QoQ. The thing is that the files that I have are
using '_' and then are followed by number of week. It seems that
searching something like this '%_6' returns results *_*6. See
attached code.
Thanks for all answers in advance.

> I think you'll find "_" is a single-char wildcard when
used with the LIKE
> operator.
Found out how to escape it:
WHERE Name LIKE '%[_]6%'
I'm glad you brought this up... I didn't know about this
until I looked @
your issue. That's my new thing learned for the day: I can go
to the pub
now ;-)
Adam

Combining results with a Query of Queries - NOT QUITE THERE!!!

I have included a small sample of my database, specifically the four tables I am trying to work with in the hopes that someone can steer me down the right path. Here are the four tables and the bottom is a visual desciption of what I am trying to achieve;
ORDERS
SALES CALLS
ID
SaleDate
TerritoryManager
UserID
SaleDate
TerritoryManager
ID
UserID
426
01-Oct-09
Mike B
10112
10/1/2009
Mike B
253
10112
427
01-Oct-09
Russ C
10115
10/1/2009
Mike B
254
10112
430
01-Oct-09
Jerry W
10145
10/1/2009
Mike B
255
10112
432
01-Oct-09
Ron H
10118
10/1/2009
Mike B
256
10112
433
01-Oct-09
Ron H
10118
10/1/2009
Ron H
257
10118
10/1/2009
Ron H
258
10118
PRODUCTS ORDERED
10/1/2009
Ron H
260
10118
OrderID
Quantity
NewExisting
UserID
10/1/2009
Russ C
261
10115
426
12
0
10112
10/1/2009
Mike B
267
10112
427
2
0
10115
10/1/2009
Mike B
268
10112
427
3
1
10115
430
1
0
10145
USERS
430
1
0
10145
TerritoryManager
Zone
UserID
432
1
0
10118
Mike B
Central
10112
432
1
0
10118
Russ C
Central
10115
432
1
1
10118
Jerry W
Central
10145
432
1
1
10118
Ron H
Central
10118
433
2
1
10120
Don M
Central
10120
Central Zone
Ttl Calls
Ttl Orders
Ttl Items
Ttl New Items
Mike B
5
1
12
1
Russ C
1
1
5
Jerry W
1
2
Ron H
3
2
6
3
I have tried to achieve this result in many ways to no avail. If I try to combine PRODUCTS ORDERED with ORDERS I get an erroneous count. I finally resigned myself to getting all the info I needed with separate queries and then trying to combine them with a query of queries. This worked fine until the last query of queries which timed out with no results. I am a newbie and would appreciate any constructive help with this. I am including my queries below as well;
<cfquery name="qGetOrders" datasource="manna_premier">
SELECT Count(Orders.ID) AS CountOfID,
       Orders.UserID AS Orders_UserID,
    Users.UserID AS Users_UserID,
    Users.TMName
FROM Users INNER JOIN Orders ON Users.[UserID] = Orders.[UserID]
GROUP BY Orders.UserID, Users.UserID, Users.TMName;
</cfquery>
<cfquery name="qGetSalesCalls" datasource="manna_premier">
SELECT Count(Sales_Calls.ID) AS CountOfID,
       Users.UserID AS Users_UserID,
    Users.TMName,
    Sales_Calls.UserID AS Sales_Calls_UserID
FROM Users INNER JOIN Sales_Calls ON Users.[UserID] = Sales_Calls.[UserID]
GROUP BY Sales_Calls.UserID, Users.UserID, Users.TMName;
</cfquery>
<cfquery name="qGetProducts" datasource="manna_premier">
SELECT Count(ProductOrders.OrderID) AS CountOfOrderID,
       Sum(ProductOrders.Quantity) AS SumOfQuantity,
    Sum(ProductOrders.NewExisting) AS SumOfNewExisting,
    ProductOrders.UserID
FROM Orders INNER JOIN ProductOrders ON Orders.[ID] = ProductOrders.[OrderID]
GROUP BY ProductOrders.UserID;
</cfquery>
<cfquery name="qqCombOrd_Prod" dbtype="query">
SELECT *
FROM qGetOrders, qGetProducts
</cfquery>
<cfquery name="qqCombOrd_ProdtoSales" dbtype="query">
SELECT *
FROM qqCombOrd_Prod, qGetSalesCalls
</cfquery>
PLEASE HELP!!! I'm about to go scouting for bridges to leap from!

You might be able to simplify that query by getting rid of the subqueries. Something like this
SELECT TerritoryManager
, count(sc.userid) totalcalls
, sum(po.quantity) total
, sum(newexisting) totalnew
, count(o.userid) totalorders
from users u join salescalls sc on u.userid = sc.userid
join orders o on u.userid = o.userid
join productorders po on u.userid = po.userid
where userzone = 'CENTRAL'

Query of Queries Error

Similar Messages

Maybe you are looking for