Query of Queries problem
Over the past several weeks we've been experiencing periodic
hangs of the ColdFusion service. We finally invested in SeeFusion
and found the problem, but aren't sure how to fix it
The code that hangs is a query of queries block. Basically we
are getting a result set from verity (~1000 rows), then getting a
result set from SQL server (~3000 rows), and joining the two with
the query of query statement. Everything will run fine for a few
hours, then that block of code will bog down. When I dumped the
threads during the error, everything gets hung like so:
"jrpp-255" runnable
at
coldfusion.sql.imq.rttExpr.guesstimateJavaType(rttExpr.java:439)
at
coldfusion.sql.imq.rttExpr.guesstimateJavaType(rttExpr.java:371)
at
coldfusion.sql.imq.imqTable.guessColumnType(imqTable.java:443)
at
coldfusion.sql.QueryTableMetaData.InferMetaDataTypes(QueryTableMetaData.java:350)
at coldfusion.sql.imq.TableList.validate(TableList.java:166)
at
coldfusion.sql.imq.rttSelectExprSpec.validate(rttSelectExprSpec.java:498)
at
coldfusion.sql.imq.rttSelectStmt.validate(rttSelectStmt.java:84)
at
coldfusion.sql.imq.jdbcStatement.fetchResult(jdbcStatement.java:538)
at
coldfusion.sql.imq.jdbcStatement.execute(jdbcStatement.java:131)
at coldfusion.sql.Executive.executeQuery(Executive.java:775)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:240)
at
coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:500)
at
cfauctionManagement2ecfc978963305$funcJOINAUCTIONSTOVERITY.runFunction(D:\inetpub\wwwroot \CustomTags\mysite\component\auctionManagement.cfc:137)
at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344)
at
coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47)
at
coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290)
at
coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254)
at
coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56)
at
coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207)
at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:366)
at
coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:198)
at
coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:157)
at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:1594)
at
coldfusion.tagext.lang.InvokeTag.doEndTag(InvokeTag.java:341)
at
cfact_search_auctions2ecfm1040202400._factor47(D:\inetpub\wwwroot\CustomTags\mysite\actio n\act_search_auctions.cfm:849)
at
cfact_search_auctions2ecfm1040202400.runPage(D:\inetpub\wwwroot\CustomTags\mysite\action\ act_search_auctions.cfm:1)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.filter.CFVariablesScopeFilter.invoke(CFVariablesScopeFilter.java:63)
at
coldfusion.tagext.lang.ModuleTag.doStartTag(ModuleTag.java:255)
at
coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:1925)
at
cfindex2ecfm1952396859.runPage(D:\inetpub\wwwroot\mysite\cfml\auctions\index.cfm:18)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at
coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915)
at
cflas2dvegas2dtimeshares2ecfm1477369516.runPage(D:\inetpub\wwwroot\mysite\cfml\las-vegas- timeshares.cfm:1)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
...etc
I believe this means CF is trying to "guesstimate" the java
type of each column in the result set. We tried to work around that
by CASTing each column as a varchar, but we still have the same
issue.
If anyone has an idea what the problem could be, we'd really
appreciate any help. Also, if anyone can suggest a way to merge the
two result sets without using SQL, that would be great too. I've
already tried nested loops to manually build the final result set,
but that was taking up to 5 seconds to run.
Environment:
CFMX 7.0.2
Win2K
SQL Server 2K
> We need more information than that to display a record,
so we select
> everything out of the database (which is fairly quick),
then JOIN that to the
> verity results (WHERE auctionID = KEY).
Right. And what do you need THOUSANDS of matches for, in one
hit, here?
And what do you need ALL those columns for, when dealing with
all these
thousands of rows. You've not really answered my question as
to "what's
the end result here?" What are you trying to achieve? I don't
mean what
you're doing to aggregate the data, but simply *why*? What is
the
requirement you have here to be engaging in this enterprise
in the first
place? Search screen? Stock control report? What?
Is there any way of optimising how much processing you're
doing?
If - say - you're doing a search results screen, you probably
don't need
1000s of results: you probably need 20. So just ask the DB
for 20: WHERE
id IN (#list of 20 IDs from Verity search results#)
If the user goes "NEXT >>", then grab the next 20
(cache the Verity query
somehow, rather than re-query it).
Obviously there's some heavy-lifting processing that might
need to process
the whole lot. Can this not be done in a sliding window of
results? Or
could you not pass the list of IDs from the Verity resultset
into the DB
somehow, and do the filtering on the DB engine, rather than
with CF (which
is not very good at bulk data processing, as you're seeing.
It's not what
it's designed for).
I find QoQ to be very flaky for all ut the most basic
operations. For
basic stuff it's fine. It does not surprise me that it seems
to leak
memory (or whatever it's doing) and eventually give up the
ghost. This
does not help you, I realise, but as a suggested practice:
don't expect too
much out of QoQ. Try some other method instead.
Adam
Similar Messages
-
Query of queries problem or bug
Hello Everyone,
I have used cfdirectory to get a list of files. As the result
I receive query with the files.
Then I want to search it using query of queries. I' ve found
a problem and I wonder if it is a bug of Coldfusion or perhaps
wrong usage of QoQ. The thing is that the files that I have are
using '_' and then are followed by number of week. It seems that
searching something like this '%_6' returns results *_*6. See
attached code.
Thanks for all answers in advance.> I think you'll find "_" is a single-char wildcard when
used with the LIKE
> operator.
Found out how to escape it:
WHERE Name LIKE '%[_]6%'
I'm glad you brought this up... I didn't know about this
until I looked @
your issue. That's my new thing learned for the day: I can go
to the pub
now ;-)
Adam -
Problem using DECODE() function with a Query of Queries
I
posted
on my blog about an issue I was having trying to use the PL/SQL
DECODE() function with a Coldfusion Query of Queries. This function
works fine when you query a database for information. However, when
you query another query, it seems that CF doesn't recognize it. I
got errors stating that it found a left parenthesis where it
expected a FROM key word. Here is a simplified version of what I am
trying to do:
quote:
<!--- Simulated query; similar to what I was calling from
my database --->
<cfscript>
qOriginal = queryNew("Name,Email,CountryCode",
"VarChar,VarChar,VarChar");
newRow = queryAddRow(qOriginal, 5);
querySetCell(qOriginal, "Name", "Joe", 1);
querySetCell(qOriginal, "Email", "[email protected]", 1);
querySetCell(qOriginal, "CountryCode", "AMER", 1);
querySetCell(qOriginal, "Name", "Sally", 2);
querySetCell(qOriginal, "Email", "[email protected]", 2);
querySetCell(qOriginal, "CountryCode", "AMER", 2);
querySetCell(qOriginal, "Name", "Bob", 3);
querySetCell(qOriginal, "Email", "[email protected]", 3);
querySetCell(qOriginal, "CountryCode", "ASIA", 3);
querySetCell(qOriginal, "Name", "Mary", 4);
querySetCell(qOriginal, "Email", "[email protected]", 4);
querySetCell(qOriginal, "CountryCode", "EURO", 4);
querySetCell(qOriginal, "Name", "John", 5);
querySetCell(qOriginal, "Email", "[email protected]", 5);
querySetCell(qOriginal, "CountryCode", "EURO", 5);
</cfscript>
<cfquery name="qCountries" dbtype="query">
SELECT DISTINCT(CountryCode) AS CountryCode,
DECODE(states, "AMER", "North America & Canada",
"EURO", "Europe & Africa", "ASIA", "Japan &
Asia","") CountryName
FROM qOriginal
ORDER BY CountryCode
</cfquery>
<cfdump var="#qCountries#">
<!--- ========== END OF CODE ========== --->
So running this returned the following error:
Query Of Queries syntax error.
Encountered "(. Incorrect Select Statement, Expecting a
'FROM', but encountered '(' instead, A select statement should have
a 'FROM' construct.
Does anybody know why this doesn't work? Is it just not
supported? Please note that I have also tried to use the CASE()
function instead of DECODE() and that resulted in basically the
same error. For now I an looping over my distinct query with a
switch statement and manually loading a new query with the data how
I want it. But it would be a lot cleaner and less code to have the
DECODE() to work. Thx!DECODE() is an Oracle function, not generic SQL. Q-of-Q is a
very limited subset of SQL and lacks many functions and clauses
available in standard SQL, especially what you may be used to using
in your particular RDBMS.
See
Query
of Queries user guide
Phil -
Can't find answer to Query Of Queries runtime error
Not only I browsed this forum but also googled this problem but unfortunnately I have no luck in finding the answer.
All I did was writing this simple query:
<cfquery name="test" dbtype="query">
select SSN,BirthDate from myquery where SSN <> '' OR BirthDate <> ''
</cfquery>
and I got this error:
Query Of Queries runtime error.
Comparison exception while executing <>.
Unsupported Type Comparison Exception: The <> operator does not support comparison between the following types:
Left hand side expression type = "DOUBLE".
Right hand side expression type = "STRING".
I tried the following and did not work either, still got the same error.
<cfquery name="test" dbtype="query">
select SSN,BirthDate from myquery
where SSN <> <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value=""/>
OR BirthDate <> <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value=""/></cfquery>
Has someone ever encountered the same problem and know how to solve it?HELP ! ! ! Going into testing soon. I need this to work to get correct report results ! ! ! !
My issue seems similar to the one under discussion and the reply from lawhite01 caught my eye. Can you roll my issue into this discussion?
This is a 2 parter. The second part is the QoQ part, but the 1st part has a line in the query that is similar to the QoQ one and it uses the same data. Part 1 also throws an error.
PART # 1.
I'm trying to use a query table created through QueryNew and then query it.
I need multiple columns in the query table I create:
<cfscript>
tot_AllCurrentDraftListing = QueryNew("AnnounceNum, JP_PDLoc, JP_JS_Title, JP_JS, JP_KW_1, JP_JobTitle, JP_Open, JP_Close, JP_CloseType, JP_CloseName, JP_PosNeed, JP_DirectHire, JP_Desc, JP_Draft, JP_Archived, JP_State, JP_AreaName, JP_AreaID, JP_AreaAlias, JP_Fac_SU, JP_Fac_Facility, JP_FAC_ID, JP_Grade1, JP_sal_low1, JP_sal_high1, JP_Grade2, JP_sal_low2, JP_sal_high2, JP_Grade3, JP_sal_low3, JP_sal_high3, JP_Grade4, JP_sal_low4, JP_sal_high4, JP_Grade5, JP_sal_low5, JP_sal_high5, JP_Posted, JP_TypeHire, JP_HRemail");
</cfscript>
Then I populate all the cells of the query table.
Then I set up to use the created query table.
I do this first:
<cfquery name="qAltPostID" datasource="#at_datasource#">
SELECT AltPoster, fk_Job_AnnounceNum
from JOB_JPContacts
Where AltJPContactType = 'AltPosterID'
and AltPoster = '#session.IHSUID#'
</cfquery>
Then, in my first query using the created query, I expect to need to choose from multiple values, so I'm using this line in the query (this is NOT a QoQ query):
and AnnounceNum IN (<cfqueryparam cfsqltype="CF_SQL_varchar" value="#ValueList(qAltPostID.fk_Job_AnnounceNum)#">)
I've also tried:
and AnnounceNum IN (#ValueList(qAltPostID.fk_Job_AnnounceNum)#)
and:
and JOB_AnnounceNum IN
SELECT fk_Job_AnnounceNum
from JOB_JPContacts
Where AltJPContactType = 'AltPosterID'
and AltPoster = '#session.IHSUID#'
ERROR is: one record should return. I get 0.
PART # 2: Here's the QoQ part.
I get the error:
Query Of Queries runtime error.
Comparison exception while executing IN.
Unsupported Type Comparison Exception: The IN operator does not support comparison between the following types:
Left hand side expression type = "LONG".
Right hand side expression type = "STRING".
A tutorial I found gave an example using only one column for this part of the fix:
tot_AllCurrentDraftListing = QueryNew("AnnounceNum", "CF_SQL_VARCHAR")
How would I set up the query with the datatype when I'm using multiple columns:
<cfscript>
tot_AllCurrentDraftListing = QueryNew("AnnounceNum, JP_PDLoc, JP_JS_Title, JP_JS, JP_KW_1, JP_JobTitle, JP_Open, JP_Close, JP_CloseType, JP_CloseName, JP_PosNeed, JP_DirectHire, JP_Desc, JP_Draft, JP_Archived, JP_State, JP_AreaName, JP_AreaID, JP_AreaAlias, JP_Fac_SU, JP_Fac_Facility, JP_FAC_ID, JP_Grade1, JP_sal_low1, JP_sal_high1, JP_Grade2, JP_sal_low2, JP_sal_high2, JP_Grade3, JP_sal_low3, JP_sal_high3, JP_Grade4, JP_sal_low4, JP_sal_high4, JP_Grade5, JP_sal_low5, JP_sal_high5, JP_Posted, JP_TypeHire, JP_HRemail");
</cfscript>
I used this code after all the cells contained values and before running my QoQ query:
<cfloop index="intID" from="1" to="#tot_AllCurrentDraftListing.recordcount#" step="1">
<cfset tot_AllCurrentDraftListing["AnnounceNum"] [intID] = JavaCast("string", intID) />
</cfloop>
Is that correct?
Thanks.
Whoever can help me with this should be awarded extra points ! ! ! ! -
Query of queries disallows SQL right() function
We're attempting to do a query of queries using the SQL
right() function like this:
select *
from getresults
where right([key],charindex('\',reverse([key]),1)-1) not in
(#quotedvaluelist(getexcluded.file_name)#)
We've even replaced that where clause with a much more simple
where right([key])='m'
just to make sure that it wasn't the nesting functions that
were causing the problem.
In either case, we get the error:
Query of Queries syntax error.
Encountered "right" at line 0, column 0. Incorrect
conditional expression,
Expected one of [like|null|between|in|comparison] condition,
What SQL functions are disallowed from query of queries?
Thanks,
KrisNasty stuff huh. Just happened to discover myself today that
Left doesn't work. I'd suspect that Aggregate functions are the
ONLY ones that will work. It would have been nice if they'd at
least allowed CF vs DB functions in their own "database" language.
BTW, also discovered that Count() returns Null rather than 0
when there aren't any per your WHERE clause. -
Bug in CF11 regarding Query of queries syntax?
So I have decided to try CF11 because of an official outstanding CF10 bug.
Once I installed CF11, I get an error when running code like this:
<cfquery name="LOCAL.stat_questions" datasource="#APPLICATION.dsn#">
SELECT survey_questionID
FROM tbl_survey_questions
</cfquery>
<cfset LOCAL.this_statID = 1>
<cfquery name="LOCAL.subset" dbtype="query">
SELECT survey_questionID
FROM [LOCAL].stat_questions
WHERE survey_questionID = <cfqueryparam cfsqltype="cf_sql_numeric" value="#LOCAL.this_statID#">
</cfquery>
The error I receive is: "Query Of Queries syntax error.
Encountered ";. "
If I remove the semi-colon... No error! Is this a bug, or was the semi-colon always bad, but just ignored?
ThanksI just always put it in out of habit from typing out actual MySQL queries (non QoQ). Never was a problem and I always did it. Now running CF11... it requires fixing. Thought it was strange.
I actually didn't even notice that the semi-colons weren't required in QoQ until I ran into this CF11 bug. I also notice the semi-colon isn't necessary for a MySQL query either in cfquery! Seems weird that it accepts them, but isn't required. Just ignores them? -
Query of queries date comparison
Cut to the basics, I'm trying to run the following code:
<cfset qData = QueryNew("dataDate,ID")>
<cfset padDate = "#DateFormat(Now(),"dd mmm yy")#
23:59">
<cfset queryAddRow(qData)>
<cfset QuerySetCell(qData,"ID",1)>
<cfset QuerySetCell(qData,"dataDate",padDate)>
<cfset delDate = "#DateFormat(Now(),"dd mmm yy")#
00:00">
<cfquery name="qZero" dbtype="query">
SELECT ID
FROM qData
WHERE dataDate = '#delDate#'
</cfquery>
This works fine in MX7 but I need to put it on a server using
MX6.1. It appears that in 6.1 query of queries considers the
dataDate field to be a date but will not accept a date on the right
hand side of the equals sign in the where clause so comes up with
'Unsupported type comparison'. Is there any way round this?I just ran into this problem actually.
What appears to be happening is QoQ has trouble comparing SQL
date types and DB date types. I had to perform an lsdateformat on
the data to get it to process.
I am also looking into a problem where QoQ is switching my
dates to strings. CF has yet to impress me. For every kind of cool
thing they do there are 25 lame things. -
I am getting this error when trying to run a query of queries
on a query constructed with QueryNew(): The value "" cannot be
converted to a number
My hosting company recently upgraded to Coldfusion 7 and this
is when the error began. It worked fine before this and I have not
been able to figure out what to do to correct the issue.
I have dumped the query that I am constructing with QueryNew
and beside some values being null the query looks fine. I don't
think having some null fields should pose a problem.
Any ideas?Try inserting the word null instead of an empty
string. -
Query of queries case sensitive
Hi,
I've a question regarding this issue. I am pulling data from an xml file and dump that data into query of queries then output them. The problem is when I try to order the query ASC, the upper will be top and the lower will be on the bottom. Is there a way to sort them before dump data into query? Or any ways of getting around this?
Thanks.Depending on your requirements, you might want to add a new column to the query, rather than calling upper() on your actual data column... it depends on whether you want your data column to be all upper case (like if you are displaying it).
So instead of this:
SELECT col1, upper(col2)
FROM q
ORDER BY col2
Have this:
SELECT col1, col2, upper(col2) AS col2Sort
FROM q
ORDER BY col2Sort
It doesn't always matter, obviously, but it's handy to keep it in mind.
Adam -
Working with Custom SQL Using Descriptor Query Manager Queries
Hi All,
I am Working on Descriptor Query Manager Queries
Configuring Custom SQL Using Java and Workbench
Using Java I wrote a static method as in the code given below.
public static void insertEmployee(ClassDescriptor descriptor){
descriptor.getQueryManager().setInsertSQLString(
"insert into EMPLOYEE (EMP_ID, EMP_NAME, EMP_JOB, SAL, DEPTNO) values (#EMP_ID, #EMP_NAME, #EMP_JOB, #SAL, #DEPTNO)"
I wrote a insert SQL Query in the custom SQL tab of the Toplink workbench .
Using java and Using Toplink Workbench I had a problem how to call this insert query in the sessionEJBBean .
Can any one suggest me in this regard.
Thanks in advance
regards,
SatishWhat is the problem you are experiencing?
Normally you can just execute the query by calling
'executeQuery(queryName, domainclass) on the session.
See also
http://www.oracle.com/technology/products/ias/toplink/
doc/10131/main/_html/qrybas003.htm#BCFIBGGJ
Just out of curiosity: why do you need a custom SQL
to insert something? Can't you use persist()?
regards,
LonnekeOr even UnitOfWork ? Why go down the route of using custom inserts to insert objects unless you have some business logic that Toplink's UnitOfWork API cannot provide ? -
Hellou everybody.
I need your help. I am using forms 6i and i have a block with some non DB items. But items are synchronize with DB items for viewing results. I use this items for diplaying results from DB tables. In enter query mode i write condition in this text items and execute query.
My problem is that i have text item which is VARCHAR2 type and I need to enter the condition for example > 1000. But i don't know how to convert this field to number. When i execute query under char type it not work properly (other result). I tried to change data type to number but i can't because it's not alowed to mixed types.
select * from table_name where pag_cis > 100 - i need this
select * from table_name where pag_cis > '100' - i have this
Can you help me???You may use the set_block_property procedure built-in and the 'default_where' property so as to execute the query using the contents of your item (with the name of column , of course).
Afterwards , you navigate to the db items block (with go_block('blockname')) and execute the query (built-in 'execute_query').
Hope it helps
Sim -
Combining results with a Query of Queries - NOT QUITE THERE!!!
I have included a small sample of my database, specifically the four tables I am trying to work with in the hopes that someone can steer me down the right path. Here are the four tables and the bottom is a visual desciption of what I am trying to achieve;
ORDERS
SALES CALLS
ID
SaleDate
TerritoryManager
UserID
SaleDate
TerritoryManager
ID
UserID
426
01-Oct-09
Mike B
10112
10/1/2009
Mike B
253
10112
427
01-Oct-09
Russ C
10115
10/1/2009
Mike B
254
10112
430
01-Oct-09
Jerry W
10145
10/1/2009
Mike B
255
10112
432
01-Oct-09
Ron H
10118
10/1/2009
Mike B
256
10112
433
01-Oct-09
Ron H
10118
10/1/2009
Ron H
257
10118
10/1/2009
Ron H
258
10118
PRODUCTS ORDERED
10/1/2009
Ron H
260
10118
OrderID
Quantity
NewExisting
UserID
10/1/2009
Russ C
261
10115
426
12
0
10112
10/1/2009
Mike B
267
10112
427
2
0
10115
10/1/2009
Mike B
268
10112
427
3
1
10115
430
1
0
10145
USERS
430
1
0
10145
TerritoryManager
Zone
UserID
432
1
0
10118
Mike B
Central
10112
432
1
0
10118
Russ C
Central
10115
432
1
1
10118
Jerry W
Central
10145
432
1
1
10118
Ron H
Central
10118
433
2
1
10120
Don M
Central
10120
Central Zone
Ttl Calls
Ttl Orders
Ttl Items
Ttl New Items
Mike B
5
1
12
1
Russ C
1
1
5
Jerry W
1
2
Ron H
3
2
6
3
I have tried to achieve this result in many ways to no avail. If I try to combine PRODUCTS ORDERED with ORDERS I get an erroneous count. I finally resigned myself to getting all the info I needed with separate queries and then trying to combine them with a query of queries. This worked fine until the last query of queries which timed out with no results. I am a newbie and would appreciate any constructive help with this. I am including my queries below as well;
<cfquery name="qGetOrders" datasource="manna_premier">
SELECT Count(Orders.ID) AS CountOfID,
Orders.UserID AS Orders_UserID,
Users.UserID AS Users_UserID,
Users.TMName
FROM Users INNER JOIN Orders ON Users.[UserID] = Orders.[UserID]
GROUP BY Orders.UserID, Users.UserID, Users.TMName;
</cfquery>
<cfquery name="qGetSalesCalls" datasource="manna_premier">
SELECT Count(Sales_Calls.ID) AS CountOfID,
Users.UserID AS Users_UserID,
Users.TMName,
Sales_Calls.UserID AS Sales_Calls_UserID
FROM Users INNER JOIN Sales_Calls ON Users.[UserID] = Sales_Calls.[UserID]
GROUP BY Sales_Calls.UserID, Users.UserID, Users.TMName;
</cfquery>
<cfquery name="qGetProducts" datasource="manna_premier">
SELECT Count(ProductOrders.OrderID) AS CountOfOrderID,
Sum(ProductOrders.Quantity) AS SumOfQuantity,
Sum(ProductOrders.NewExisting) AS SumOfNewExisting,
ProductOrders.UserID
FROM Orders INNER JOIN ProductOrders ON Orders.[ID] = ProductOrders.[OrderID]
GROUP BY ProductOrders.UserID;
</cfquery>
<cfquery name="qqCombOrd_Prod" dbtype="query">
SELECT *
FROM qGetOrders, qGetProducts
</cfquery>
<cfquery name="qqCombOrd_ProdtoSales" dbtype="query">
SELECT *
FROM qqCombOrd_Prod, qGetSalesCalls
</cfquery>
PLEASE HELP!!! I'm about to go scouting for bridges to leap from!You might be able to simplify that query by getting rid of the subqueries. Something like this
SELECT TerritoryManager
, count(sc.userid) totalcalls
, sum(po.quantity) total
, sum(newexisting) totalnew
, count(o.userid) totalorders
from users u join salescalls sc on u.userid = sc.userid
join orders o on u.userid = o.userid
join productorders po on u.userid = po.userid
where userzone = 'CENTRAL' -
A strange query of queries bug in CF11?
Hi,
I have this strange query of queries result that could be a bug in CF11. The result is fine in CF10.
Basically, I have 2 queries, qrA and qrB. I do a join of the two in joinQr, after which I do a query of qrA. Since I didn't alter qrA in any way, I would expect newQrA to give me the same result as qrA. However it only gives me one row ("D"). Now, here's the strange thing: If I start off qrA with the letters in ascending order ["A", "B", "C", "D"], then newQrA gives me the right result.
<cfset qrA = queryNew("")>
<cfset queryAddColumn( qrA, "size", "varchar", [ "D", "A", "B", "C" ] )>
<cfset qrB = queryNew("")>
<cfset queryAddColumn( qrB, "size", "varchar", [ "A" ] )>
<cfset queryAddColumn( qrB, "quantity", "integer", [ 0 ] )>
<cfquery name="joinQr" dbtype="query">
select qrA.*, qrB.quantity
from qrA, qrB
where qrA.size = qrB.size
</cfquery>
<cfquery name="newQrA" dbtype="query">
select *
from qrA
</cfquery>
<cfdump var="#qrA#">
<cfdump var="#qrB#">
<cfdump var="#joinQr#">
<cfdump var="#newQrA#">For your interest, by coincidence, my first test was with
<cfset queryAddColumn( qrA, "size", "varchar", [ "A","B","C","D" ] )>
It turns out that the order "A","B","C","D" works, whereas "D","A","B","C" fails. Quite funny, really. -
Query Of Queries : Error When Trying To Fake Left Outer Join
Hi there
I am trying to replicate a left outer join, combining two query of queries using a method I located here
However, I keep getting an error message..
Here is the code I am using....
<cfquery dbtype="query" name="qry">
SELECT *
FROM returnQry, returnQry2
WHERE returnQry.mediumImage = returnQry2.mediumImage
ORDER BY returnQry.name
</cfquery>
<cfquery name="returnQry3" dbtype="#application.mx#">
SELECT *
FROM trackmeanings AS t
</cfquery>
<cfquery dbtype="query" name="endQry">
SELECT name,nameRcd,mediumImage, COUNT(sMessage) AS comments
FROM qry, returnQry3
WHERE qry.name = returnQry3.sNameTrack
UNION
SELECT name,nameRcd,mediumImage, COUNT(sMessage) AS comments
FROM qry, returnQry3
WHERE #qry.name# NOT IN (#QuotedValueList(returnQry3.sNameTrack)#)
GROUP BY name,nameRcd,mediumImage
</cfquery>
When I try to use the query output in a page, i get the error message "Incorrect conditional expression, Expected one of [like|null|between|in|comparison] condition"
Would anyone have any ideas?
Many thanksActually , spoke a little too soon, my query now seems to be outputting duplicates when the value is found on both sides of the union, my group by clause doesnt seem to be eliminating them like it usually does.
My SELECT code now reads
<cfquery dbtype="query" name="endQry">
SELECT name,nameRcd,mediumImage, COUNT(sMessage) AS comments
FROM qry, returnQry3
WHERE qry.name = returnQry3.sNameTrack
GROUP BY name,nameRcd,mediumImage
UNION
SELECT name,nameRcd,mediumImage, 0 AS comments
FROM qry
WHERE qry.name NOT IN (<cfqueryparam
value="#returnQry3.sNameTrack#"
cfsqltype="cf_sql_varchar"
list="yes"
/>)
GROUP BY name,nameRcd,mediumImage
ORDER BY name DESC
</cfquery>
and my ouput...is producing duplicates
<cfoutput query="rc.qryTopTracks" group="name">
#rc.qryTopTracks.name#
</cfoutput>
Would you have any idea of how to eliminate them here? Thanks -
Query Of Queries syntax error.
Hi all,
I have the following query:
<cfquery name="agent" datasource="datasourcename">
SELECT * FROM quotes where status = 'Pending'
<cfif isDefined("form.agent")>
AND agent = '#FORM.agent#'
</cfif>
</cfquery>
Then, I have the following query of that query
<cfquery name="totalvalue" dbtype="query">
SELECT SUM(value) as total FROM agent
</cfquery>
however I get the following error:
Query Of Queries syntax error.
Encountered "SUM ( value. Incorrect Select List,
on line 20 which is:
<cfquery name="totalvalue" dbtype="query">
now i'm sure this is identical to what ive used before but
getting the error. the totals query works fine when querying the
database direct, only got this error when I changed it to query the
master query.
i appreciate any help in advance, as no matter how much i
stare at it I can't see whats wrong!I believe that
value is a reserved word that is probably causing your
current error. I would rename this column, or alias it in your
original query. Also, I would add WHERE value IS NOT NULL to your
Q-of-Q to cover your NULLs.
Phil
Maybe you are looking for
-
The iPhone cannot be synced. The disk could not be read or written to.
+The iPhone cannot be synced. The disk could not be read or written to.+ That's the message I get when I sync my iPhone now after flawless syncing since the second day they came on sale. I restarted, I repaired permissions. The iPhone is only half fu
-
Can I change the size of the font in Address Book and Mail?
I'd like to make the default font larger in Address Book and in Mail. How do I do it?
-
How do I set a variable within a 'for' loop grid array
I'm afraid I'm stuck again! The next stage in the animation that I'm working on, is to set up a boolean, 'drilled = false', so that all instances of the attachMovie ('openCircle') have a boolean 'drilled = false' associated with them. Then when some
-
Setting alignment of cell content in jtable??
hi, does anybody know how i can set the content of my jTable cells to the center of each cell. thanx, mischa.
-
I know how to search for jpegs or documents by a file name but what about a name of a folder? thanks in advance