Query of the cube # is getting displaced

Hi All,
In the query of the cube for characteristics whereever it is blank from the cube it is getting displayed by a '#".I want it to display a blank. how to overcome this problem.
thanks

Hi Pavan,
Please try to seach thr forums before posting a question. See this thread:
Replace the default u0091#u0092 in BEx
Re: replacing '#'-sign for 'not assigned' in queries
Hope this helps...

Similar Messages

Data in the Cube not getting aggregated

Hi Friends
We have Cube 1 and Cube 2.
The data flow is represented below:
R/3 DataSource>Cube1>Cube2
In Cube1 data is Stored according to the Calender Day.
Cube2 has Calweek.
In Transformations of Cube 1 and Cube 2 Calday of Cube 1 is mapped to Calweek of Cube 2.
In the CUBE2 when i upload data from Cube1.Keyfigure Values are not getting summed.
EXAMPLE: Data in Cube 1
MatNo CustNo qty calday
10001 xyz     100 01.01.2010
10001 xyz      100 02.01.2010
10001 xyz      100   03.01.2010
10001 xyz     100 04.01.2010
10001 xyz      100 05.01.2010
10001 xyz      100   06.01.2010
10001 xyz      100   07.01.2010
Data in Cube 2:
MatNo CustNo qty calweek
10001 xyz     100 01.2010
10001 xyz      100 01.2010
10001 xyz      100   01.2010
10001 xyz     100   01.2010
10001 xyz      100   01.2010
10001 xyz      100   01.2010
10001 xyz      100   01.2010
But Expected Output Should be:
MatNo CustNo qty calweek
10001 xyz     700 01.2010
How to acheive this?
I checked in the transformations all keyfigures are maintained in aggregation summation
regards
Preetam

Just now i performed consisyency check for the cube:
I a getting following warnings:
Time characteristic 0CALWEEK value 200915 does not fit with time char 0CALMONTH val 0
Consistency of time dimension of InfoCube &1
Description
This test checks whether or not the time characteristics of the InfoCube used in the time dimension are consistent. The consistency of time characteristics is extremely important for non-cumulative Cubes and partitioned InfoCubes.
Values that do not fit together in the time dimension of an InfoCube result in incorrect results for non-cumulative cubes and InfoCubes that are partitioned according to time characteristics.
For InfoCubes that have been partitioned according to time characteristics, conditions for the partitioning characteristic are derived from restrictions for the time characteristic.
Errors
When an error arises the InfoCube is marked as a Cube with an non-consistent time dimension. This has the following consequences:
The derivation of conditions for partitioning criteria is deactivated on account of the non-fitting time characteristics. This usually has a negative effect on performance.
When the InfoCube contains non-cumulatives, the system generates a warning for each query indicating that the displayed data may be incorrect.
Repair Options
Caution
No action is required if the InfoCube does not contain non-cumulatives or is not partitioned.
If the Infocube is partitioned, an action is only required if the read performance has gotten worse.
You cannot automatically repair the entries of the time dimension table. However, you are able to delete entries that are no longer in use from the time dimension table.
The system displays whether the incorrect dimension entries are still being used in the fact table.
If these entries are no longer being used, you can carry out an automatic repair. In this case, all time dimension entries not being used in the fact table are removed.
After the repair, the system checks whether or not the dimension is correct. If the time dimension is correct again, the InfoCube is marked as an InfoCube with a correct time dimension once again.
If the entries are still being used, use transaction Listcube to check which data packages are affected. You may be able to delete the data packages and then use the repair to remove the time dimension entries no longer being used. You can then reload the deleted data packages. Otherwise the InfoCube has to be built again.

Error Message on query of the cube 0PUR_C01

Hi Gurus,
I am executing the standard query 0PUR_C01_Q0004 on cube 0PUR_C01 (Purchasing).
For some results lines I see the following message "No calc possible" on key figures values. Has anybody seen this error before??
I will really appreciate any help.
thanks
Ricardo Okazaawa

Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Cube not getting all the data from DSO

Hi experts ,
I have a scenario where i have 256 records in the DSO . I am loading the DSO data into Cube .but the cube is getting loaded with 200 records . Can any body help me in this regard ???
Samir

Hi samir,
This might be usual because the records in the cube get aggregated. so u will not add records in the cube but data will be updated correctly.

Modelling the fields in the cube from different source system.......

Hi,
I need to create one query on the cube.
User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube.
These are master data fields ( 7 fields in total) from other source system.
Cube gets data from one ODS.
some steps I need to do are :
1) create new source system
2) Create corresponding objects in BW.
3) Model the things in ODS and cube
Can somebody let me know what is the best way/steps to model such scenario.
Thanks, Jeetu

Hi,
Replicate both the data sources to BW.
Create 2 infosources/transformations, map them to respective fields and infoobjects.
Now assign them to cube and load the data
hope this helps.
Rgs,
I.R.K

Query on Inventory Cube 0IC_C03

Hi All
When running a query on Inventory Cube, I get some of the values like this "[2,000]" and the value is not taken into account in the total row.
Any Idea about the "[Value]"?
Thanks
Dror Golani

Hi,
Probably it could be a NUMC data type.Just check.
venkat

Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Runtime Error when executing Query in the web

Hello,
when i try to execute a query on the web, i get the error
Exception in BI runtime
Log ID: 005056BD15DA005E000000A900000A3400043C8F00E4DD8B
Initial cause
Message:
'user' missing
Stack trace:
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
Message:
No connection possible to BI master system VB0CLNT800
Stack trace:
com.sap.ip.bi.base.service.connection.ConnectionException: No connection possible to BI master system VB0CLNT800
Can anyone please tell me , how to fix this ..
Thanks
Raj

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Problem regarding request not coming to the cube,

Hello,
I created infocube then in source of transformation , select object type( data source) and specifed the name and source system u2022 Activate created transformation u2022 Create Data transfer process (DTP) by right clicking the master data attributes u2022 In extraction tab I specified extraction mode ( full) u2022 In update tab I specified error handling (requestgreen).I activated DTP and executed tab click execute button to load data in data targets.
Then I right clicked data targets and selected manage and in contents tab select contents to view the loaded data. But the duplicate records were there.So i deletd the requets from cube and again ran the infopackage but the request didn't come again.
So please tell me what to do in this point of time to bring the request again into the cube and get the selected contents.
Thanks
JINI

This is a known issue and the workaround is to do ctrl+alt+bksp+bksp(kill session) or disable USB redirection for that pool
if you are not using USB-R.
Thanks
P.S.M.Swamiji
Note: These are my personal opinions, nothing to do with my employer

Regardnig the Cube Processing.

Hello Team,
When I tried to process the cube, am getting the folowing window, which shows the cube processing whch is in progress.
My Questions are
. What is the number which we can see as 9 of 13?. Why It is different for each partittion of one measure group?
. For few partitions, the Inprogress one's which we are getting as 9 or 13/12 or 13/7/200000?. What It doest meant for?

Hi,
This is the way that SSAS engine displays that Indexes are getting created.
Regards,
Venkata Koppula

Ispoke and load to the cube

I have a pricing cube. I also have a Ispoke which extracts the data from this cube. I want to run the Ispoke for a particular month for year 2005. Will there be any conflict between the load to this cube and the Ispoke ? Meaning, if i run the Ispoke while the cube is getting loaded, will there be any problem ?

You should not be extracting the Data, which is getting loaded. Means if you are giving selection say, year 2005, then the data gettting loaded should not be for year 2005. Otherwise there might be some inconsistencies in the Data extraction.

Get metadata of the cube or query

Hello all,
is there a function module,give a query or infocube name,I can get the meta data of the
cube or the query.
regards
kaushik

Hi there,
The best way to know the metadata from the cube or the query is to use the transaction rsa1->metadata repository.
To see the metadata from the Cube with function module you can use the function module BAPI_CUBE_GETDETAIL.
To see the contents of the query you can create a program to read the content of the query. I use a program from SDN to do that.
Diogo.

Time-dependent master data in the cube and query

Hello,
I have a time-dep. masterdata infoobject with two time-dep attributes (one of them is KF). If i add this infoobject into the cube, what time period SID will be considered during the load? I assume it only matters during load, if i add the KF to the query it gets its value based on the SID in the cube.. right?
Thanks,
vamsi.

If its Time Dependent Master Data object when you run your Master Data if that time any changes to the Master Data that value will be overwrite to the old value you will get the new value. When you run the Query execution the Infocube Master Data infoobject will having the SID that time it will to there it will be displayed at that moved what is the value you have in the Master Data table.
This is what my experience.
Thanks,
Rajendra.A

Java.sql.SqlRecoverableException error while querying the cube

Hi
I get the following error when I try to query the cube from a Java program
java.sql.SqlRecoverableException: no more data to read from the socket.
This error occurs sometimes and sometimes it does not occur.
We observed that if many people simultaneously try to query the cube the error crops up.
Is this a bug or is there a solution or a method to deal with this sort of situation

That sounds like the connection to the database is not there, or was dropped. Check that you are not maxed out on the number of processes.

How to get the histoical data for newly added field in the cube?

Hi Experts,
I have small doubt on remodeling the infocube.
After adding the characteristic or keyfigure to a cube by using remodeling concept, how can I get the historical data for that particular field.
I have searched in SDN also but I didn't get proper information.
Please excuse me if I posted repeated question.
helpful answer will be awarded with poitns.
Thanks & regards,
Venkat.

hi
depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
Advantages
that will cost less effort and guarantee the result.
Drawbacks
data is redondant for a while
space (depending on the volume of historical data)
So here are the steps :
step 1Adjust your extraction process according to the fields you need to add to populate the cube.
step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
step 3 Copy the query to the previous built multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
bye
Boujema

Query of the cube # is getting displaced

Similar Messages

Maybe you are looking for