Query on auto-refreshing frames / linked .pdf docs on link
All,
I'm in the process of building a website on an intranet which, heavily uses content from a .pdf document. I'm using a frame-structured website (two Vertial frames), with the left-hand side frame used as a nav bar and the pdf content displayed on the right. I've been able to link the links on the left to bring up and display the .pdf doc on the right-hand frame, however after the first link has been clicked the clicking of further frames does not either seem to refresh the doc or change the position to the relevant .pdf bookmark.
My questions are therefore as follows. Does anyone know how to:-
A) Add a html command onto each link which will force the pdf document to reload?
B) Force a refresh of the right-hand side content frame every time a link has been clicked on the left?
C) Alter the .PDF document so that it will allow the moment to the correct bookmark/destination when called by a link selection in the left-hand nav frame?
D) Save the .PDF into an alternate working format which may bypass any potential problems with moving to a requested bookmark in an already-open doc?
E) Force the opening of the .PDF in the browser, rather than in an opened adobe .PDF viewer?
Sorry guys I'm not the most technical person in the world, but would certainly appreciate any help anyone can offer!
Al
You should keep it simple and best practice. Keep lag enabled even if you are only going to use one port on the wlc. When you disable lag, then that is when the configuration becomes tricky and that's why it's not supported.
Sent from Cisco Technical Support iPhone App
Similar Messages
-
Newbie problem - how to refresh frames when selected by a link
A few weeks ago I was handed an antiquated frame-based site to update which has given me more than a few headaches. I’ve managed to acquire a copy of Dreamweaver CS 3 from the power that be, and have been trying to find a solution to the following problem:
I am attempting to tie in a .pdf document into a simple frame template, with a static left-hand frame allowing the user to select and display the anchored point on a .pdf document on the right. This I’ve done with few peoblems, however when the user tries to click another link the dispayed .pdf doc after an initial selection the right-hand frame doesn’t move position to the newly selected anchor point.
This I think is due to the fact that the link refers to the same document, despite the fact that it’s to a different location on the doc. I have been trying to find a way to ‘refresh’ the page when a link is selected so that the right-hand side diplay moves to the correct anchor point, but I’d had little luck.
My question to you all is as follows: is there I can tell CS3 to refresh the right-hand side frame every time a link is clicked? Any help would be appreciated!
Yours, a very naiive newbie Dreamweaver userThe website I'm currently working on is an internal network, so unfortunately it's unavailable for general view. The layout sticks pretty close to the normal two frame dreamweaver template, with a series of created links on the left frame opening an adobe document in the right frame. Very basic but that's largely the intention.
The reason why I am linking to a .pdf document is simply because my work task demands I keep it in use, however since this means future revisions should be fairly easy (working off the same anchor/destination points in the .pdf document text this isnt a huge issue).
Not entirely ideal I know but at least it creates an interesting problem!
If anyone has a easy to create, newbie-friendly alternative to frames whereby I could create a site which links directly to specific areas in a .pdf document on demand I would be a very happy man! Willing to potentially offer beer/first-born as payment. -
Framemaker link to open a PDF doc (internet link) on spcific page?
Hey guys,
I have a Framemaker book (that will eventually be a PDF book) and I want a document file in the FM book to have a hyperlink to an EXTERNAL PDF, an internet address (http,) but I need the external PDF to open on a specific page, pg 24.
I can get the hyperlink to open the external PDF, but I cannot get the pdf to open on pg 24.
Any ideas?
Thanks!What version of Acrobat do you have? This feature worked in Acrobat 6 and it works in 8.1.2. (It wasn't fixed in 8.0, don't remember about the other 8.x point releases.) It does NOT work in Acrobat 7.x. You do not need the quotation marks. There is an Acrobat thread about using named destinations (better to use than page numbers, if in the future the page number for the content might change), but this thread also touches on the use of the page reference in the link. See http://www.adobeforums.com/webx/.3bc5423d/32 - it might help. Another thing I don't know about is whether Frame does anything to that link during the Frame-to-PDF conversion. (It shouldn't, but I can't check this right now.)
So, if you are using Acrobat 7.x, you will need to upgrade. HTH, GMc -
Broken link - pdf doc - Oracle lifetime datasheet
There are plenty reference to this below url which doesn't work anymore :
http://www.oracle.com/support/library/data-sheet/oracle-lifetime-support-policy-datasheet.pdf
As I understand, it has been replaced by this one :
http://www.oracle.com/support/library/brochure/lifetime-support-technology.pdf
Isn't it possible to make a link from the first to the second ?
Nicolas.Thanks Nicolas,
We have set up a notification at the old URL of http://www.oracle.com/support/library/data-sheet/oracle-lifetime-support-policy-datasheet.pdf to direct users to the new location for an overview of the Oracle Lifetime Support Policy.
Regards,
Lawrence/OTN -
A PDF document with links to other PDFs corrupts the URL and get 404. Works in IE.
One of our supplier sites has manuals online that are PDF docs with links from one to another. For example, when I click on "Tanaka" I get a PDF menu of Tanaka service manuals, etc. When I click on a section, such as "Chainsaw" I get a 404. Part of the directory structure in the URL is missing. For example when in the Tanaka PDF menu I click on Chainsaw I go to http://www.parklands.net/Resources/Tana%20CSaw%20Menu.pdf which is wrong. It should be http://www.parklands.net/Resources/Tanaka/Tana%20CSaw%20Menu.pdf, and in IE it is.
== URL of affected sites ==
http://The linked documents will not be automatically converted to PDFs and merged
with your file, neither in Acrobat Standard nor in Acrobat Pro. You can do
it, but you'll need to do it manually by converting all the files to PDFs,
merging them and then adding the links between them. -
UDF at header level will not auto refresh before & after adding the invoice.
Hi All,
I have a FMS query in the UDF at AR Invoice header level. I have set the FMS query to auto refresh when tax rate field changes but the UDF doesn't auto refresh when there is a tax code in the document.
I will need to add the invoice first then open the added invoice and press shift+F2 to get the calculated amount in the UDF to update the invoice.
How to get the UDF to auto refresh whenever the tax code has changed? Or after the invoice has added?
The FMS query:
SELECT sum(T0.[TotalSumSy]) FROM INV1 T0 inner join OINV t1 on t1.docentry = t0.docentry WHERE T0.VatGroup in ('SR','DS','AJS') and t1.docentry = $[OINV.docentry]
Thanks & BR,
LengHi,
I solved the problem following the steps in SAP note 633285 - Printing the total Vat amounts in each Vat group, https://websmp130.sap-ag.de/sap/support/notes/0000633285
In order to print in the order the Vat amount in each vat group Please perform the followed stages:
Go to Tools (in the SBO tool bar ) and chose Manage User Field
In Marketing Documents (Rows) add new fields according to the Num of the vat groups that you are using in Orders (e.g. A1, A2 ,A4) The type : Units and Totals - the Structure: sum in the order each column will represent the vat amounts in the line but only for certain Vat Group
in order that each column will display the vat amount in the line only if it belong to certain Vat group we attach a query to each column: (e.g. we have 3 columns : A1, A2, A4) .the queries are;
SELECT $[$38.82.NUMBER] WHERE $[$38.18.0] = 'A1' FOR BROWSE SELECT $[$38.82.NUMBER] WHERE $[$38.18.0] = 'A2' FOR BROWSE SELECT $[$38.82.NUMBER] WHERE $[$38.18.0] = 'A4' FOR BROWSE Now each column will display the vat amount only if it in the relevant vat group
in the order document printing template you need to add those Vat column in our example we add 3 data fields : the file: Order - Rows , the Field: A1/A2/A4 - you can hide (un visible ) this columns as needed
in the Repetitive Area Footer add a calculation field for each vat groupthe Type: Column Total , the Column: Order; A1/A2/A4 in each calculate field you will get the sum amount of the vat in the relevant Vat group. (in addition you can add text fields with a relevant description for the calculation fields)
Thanks & BR,
Leng -
Auto refresh when opening a workbook
Hi
When I open a workbook, I would like the query to auto refresh. In that way the planning user will see the latest planning values and not the ones saved in the workbook.
Is there any functionality for running the planning function refresh automatically when the workbook is opened?
Kind regards
ErikHi Erik,
Once you open the workbook, just right click on result area and select properties.
In that select the Interaction tab and then check Refresh query when opening workbook.
Then dont forget to save the work book.
Regards,
anil -
Auto Scheduled run of the Sql server management studio or a auto refreshing query
Hi ALL ,
This is a very different weird requirement but workaround for one of my requirement . Scenario is that sql server enterprise edition is installed on a vm . I create a session with the vm using the remote desktop . I have scheduled a ssis package
on the server and it should run 4 am daily us timing but its failing . If in case a user is connected to the management studio package runs on time . So i have to disconnect from the remote desktop and its not possible for me to login at 4 am every day for
running package.
Requirement : Is it possible that the sql sever management studio automatically turns on at 03:30 am and authenticates in .If that is possible my package won't fail . If this is not possible is it possible that sql script auto refreshes every
30 min's so what i can do i will run the auto refreshing script in the management studio once and will disconnect the remote desktop not the sql server session so my virtually my session on vm will end but vm is always on from the vcenter and there is some
activity on the sql server management studio so even the application won't be closed after a stipulated time frame leading to running of my package on time.
Please helpHi Latheesh NK ,
Below is the error message SSIS one i extracted from the history :
Date 3/8/2014 11:00:00 AM
Log Job History (SSIS package)
Step ID 1
Server xyz\xyz
Job Name SSIS package
Step Name Package
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: xyz\Administrator. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:00:00 AM Error: 2014-03-08
11:00:01.31 Code: 0xC0208449 Source: Data Flow Task 1 Source - Query [95] Description: ADO NET Source has failed to acquire the connection {68D5B1D7-17B1-4F95-9B1D-7615425C4A07} with the
following error message: "ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". End Error Error: 2014-03-08 11:00:01.31 Code: 0xC0047017 Source:
Data Flow Task 1 SSIS.Pipeline Description: Source - Query failed validation and returned error code 0xC0208449. End Error Error: 2014-03-08 11:00:01.31 Code: 0xC004700C Source:
Data Flow Task 1 SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-03-08 11:00:01.31 Code: 0xC0024107 Source: Data Flow Task 1
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 AM Finished: 11:00:01 AM Elapsed: 0.406 seconds. The package execution
failed. The step failed. -
Does Adobe Reader for iOS have the ability to open inbedded links created with Acrobat Standard to additional PDF docs? If not, then what would be the best way to use these already created PDF's on an I Pad?
driddy61,
As of June 2014, none of the Adobe Reader mobile products support the hyperlink action for opening a separate PDF document.
Adobe Reader for iOS
Adobe Reader for Android
Adobe Reader Touch for Windows 8
In addition, the Reader mobile products do not open multiple windows/documents simultaneously, which would make the navigation between PDF documents nearly impossible. (Once a hyperlink takes you to a different PDF document, you have no way to go back to the original PDF document.)
The only Adobe Reader product that fulfills your department's requirements is Adobe Reader XI (mostly for Windows/Mac desktop/laptop computers). Acrobat Pro and Standard are paid products.
Because you are in search of a less expensive device for your department, you could get a Windows tablet instead of a Windows desktop/laptop computer. Microsoft Surface Pro (that you've mentioned in your previous reply) is just one example. You can also find other less expensive Windows tablets.
Tablets
However, please keep in mind that there are two different types of Windows tablets running two different operating systems.
(a) A Windows tablet with an Intel-based processor running Windows 8.1 Pro
Example: Surface Pro 3
You can install and run traditional desktop apps (e.g. Adobe Reader XI) and new Windows Store apps ("Modern" or "Metro-style" apps).
(b) A Windows tablet with an ARM-based processor running Windows RT 8.1
Example: Surface 2
You can only install and run Windows Store apps (e.g. Adobe Reader Touch) but not traditional desktop apps like Adobe Reader XI.
In general, type (b) tablets are more affordable than type (a) tablets. However, if you want to run Adobe Reader XI, you do need to check the technical specification of each tablet and make sure the following conditions are met.
Processor: Intel
Operating system: Windows 8/8.1 or Windows 8/8.1 Pro, not RT
Hope this helps you choose the right device for your department. Please let us know if you have any questions about system requirements or supported features in the Adobe Reader products. -
VO Auto Refresh error - Unsupported query for Continuous Query Notification
I created a read only view object and set the auto refresh property to true. According to the documentation that was all that need to be done in order to enable auto-refresh for a view instance of a shared application module (which I am using to retrieve reference data). When I run a test, I get the following error:
[371] DCBindingContainer.reportException :oracle.jbo.SQLStmtException
[372] oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT
CCIPO_REF_SENSITIVITY_LEVEL.SENSITIVITY_ID SENSITIVITY_ID,
CCIPO_REF_SENSITIVITY_LEVEL.SENSITIVITY_DESC SENSITIVITY_DESC
FROM
CCIPO_REF_SENSITIVITY_LEVEL
at oracle.jbo.server.BaseSQLBuilderImpl.processException(BaseSQLBuilderImpl.java:3721)
at oracle.jbo.server.OracleSQLBuilderImpl.processException(OracleSQLBuilderImpl.java:4722)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1386)
at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:928)
at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:6968)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1183)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1037)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2774)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2751)
at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1580)
at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3500)
at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:9943)
at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:779)
at oracle.adf.model.binding.DCIteratorBinding.refreshControl(DCIteratorBinding.java:679)
at oracle.jbo.uicli.binding.JUIteratorBinding.refreshControl(JUIteratorBinding.java:474)
at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4437)
at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:347)
at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1605)
at oracle.jbo.jbotester.panel.BindingPanel.setBindingContext(BindingPanel.java:116)
at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:88)
at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:71)
at oracle.jbo.jbotester.form.BindingForm.createMasterPanel(BindingForm.java:63)
at oracle.jbo.jbotester.form.BindingForm.init(BindingForm.java:98)
at oracle.jbo.jbotester.form.JTForm.<init>(JTForm.java:72)
at oracle.jbo.jbotester.form.BindingForm.<init>(BindingForm.java:50)
at oracle.jbo.jbotester.form.FormType$1.createForm(FormType.java:63)
at oracle.jbo.jbotester.form.FormType.createForm(FormType.java:199)
at oracle.jbo.jbotester.form.FormType.createTab(FormType.java:270)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:248)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:207)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:203)
at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:140)
at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:123)
at oracle.jbo.jbotester.tree.Tree.processTreeMouseClicked(Tree.java:728)
at oracle.jbo.jbotester.tree.Tree.access$100(Tree.java:96)
at oracle.jbo.jbotester.tree.Tree$TreeMouseListener.mouseClicked(Tree.java:141)
at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
at java.awt.Component.processMouseEvent(Component.java:6292)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: ORA-29983: Unsupported query for Continuous Query Notification
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:924)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1261)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1419)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3806)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1667)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1262)
... 65 more
The query is selecting two varchar2 columns and according to the criteria in the documentation is valid to be registered for QRCN in Guaranteed Mode. Any thoughts?
JDev version: JDeveloper 11.1.1.5.0.Well, could be a DB bug. I seem to remember that there was a bug in that area in an older version of 11g.
Or you could use jnettrace to trace the calls made by the driver to the DB. That should show you what's going wrong.
Sascha -
How to hide linked slides in PDF docs in Keynote?
Well... I want to make a CV (Curriculum Vitae) that should be for the German rules with max two pages. And I would like to make a keynote with two pages and 20 hided linked pages and sent it in PDF. Because... if the person that is reading the document wants more information of any job i did, he could press the button ...More, that would bring more information about it. It will be great for the person that receives this kind of CV because he would see (receive) just two pages, as he expect, but actually the document has another 20 pages or more linked on it, and these pages would be hided to don't confuse the examinator giving more details just if necessary (Avoiding visual polution) So... Can I do it? with Keynote? A PDF doc with one or two pages and 20 or more hided linked sllides? Thank you guys.
To create an interactive PDF from a Keynote presentation:
Presentation pane of the Setup inspector > Presentation Type pop-up menu > Hyperlinks only
draw an object using the shapes tool to create a hyperlink button
select the object > right click > Add Link
Link to Slide > Click Go To Slide > select the required slide number
create as many buttons as required to link to the other slides
File > Export > PDF -
I would like to password protect editing of a placed PDF. I have set the PDF Open Doc password to false and the Edit permissions to true. Illustrator still requires the permissions password to OPEN the Illustrator document. This would defeat the purpose, no?
Well, it does seem to work, sort of. The Illustrator document with a placed, protected PDF asks for the password when opening. The password is also required when attempting to embed (edit) the linked PDF, as expected.
I would think the correct behavior should be for the Open Document password protection (or lack of) to control opening the Illustrator document and the Edit Permissions password to be applied when embedding or flattening the linked PDF, making it accessable to editing. Acrobat seems to be able to make this distinction.
This would be a significant feature for users who need to restrict editing of sensitive portions of their layouts while allowing necessary prepress work downstream. -
Is possible auto-refresh the Shared Links sidebar in Safari 6.1?
Is possible to set auto refresh for the Shared Links sidebar in the new Safari 6.1. There's in "View" menu > Refresh Shared Links, but don't have shortcut to refresh, but isn't fast and confortable.. :|
Hello odde2
You can create a shortcut for any application by following the steps in the article below.
OS X Mountain Lion: Create keyboard shortcuts for apps
http://support.apple.com/kb/PH10837
Regards,
-Norm G. -
Links to mp3 files in pdf docs not working on laptops
I'm working in IDCS3 on imac OS 10.4.11, producing pdf documents with links to sound files (mp3) and video (mp4). The sound/video files are not embedded.
The pdfs and sound/video files are placed on a CD. We have tested these pdfs on desktop Macs and desktop PCs, and the links to the sound files work fine, but on a laptop the links to the sound files fail completely (ie usually nothing happens, though sometimes there is a message saying the computer is searching on the C drive for the files, instead of in the correct folder on the disk). The links to the video files do work though. Any ideas?I have tried to embed the mp3 and mp4 files, but the place command will not recognise them (they are always greyed). The only way I have been able to make the sound files play is by linking to the files using a button, but the 'embed all' command on making a pdf doesn't seem to work with this.
-
Link in PDF doc need to open in a new browser window
I am using Adobe Pro 7.0, and in the PDF that someone opens, I want links, but when a user clicks on the link, I dont want them to click and have the link open in the same window, and replace the PDF they are viewing.
Please advise on how to open a link in the previous window, or a new window (sizeable) if possible.
Tried both of these and they dont work
javascript:void(window.open('http://www.link.com'))
javascript: poponload('http://www.link.com')
Thank youSorry, since you posted in the Acrobat Scripting Forum I assumed you knew about Acrobat Scripting and were looking for a scripting solution.
When you create your link with the Link Tool, under Link Action choose "Custom link". Click "Next", go to the Actions tab and add a "Run a JavaScript" action. In the new box that pops up, put in the JavaScript I gave you.
Maybe you are looking for
-
BI 7.0 front end installation problem
Hi Gurus When I click on the Business Explorer -> Analyzer 7.10 It opens up MS Excel but when I click on the connect tool icon the sapgui connect does not showup We are on SAPGUI 7.10 patch 03. Also from the query desiger ,when i go to View>>>standar
-
How to use pl/sql code as ODI user defined function
Hi All, i have a pl/sql code and i want to create ODI user defined function using this code . please find the pl/sql code below: ============================ declare v_no_of_duplicate_rec number := 0; begin select count(*) into v_no_of_duplicate_rec
-
Getting list of reports and related tables used in those reports using sdk
some columns are changing in the database tables. we like to know how many reports are affected by that . please can any one help me in getting list of reports and tables associated with them using bo sdk. thanks for your help in advance
-
Pre-Configured Cisco VPN Client install
Im looking at creating a pre-configured install for the 4.8 client. This normally involves editing cab file contents?? I've been unable to locate a 'how 2' guide for this, does anyone have any ideas, has anyone tried this before, can it be done???
-
Just purchased CS5 and installed. InDesign refuses to come up. No matter what I do it comes up with the "InDesign has quit unexpectedly." I read some things that I tried and nothing worked. I repaired permissions with no luck. I reinstalled and same