Query on B2B_In_Queue/B2B_Out_Queue

Hi
I am using SOA Suite for HealthCare/B2B 11.1.1.7 version and had the below query-
Similar to listening on B2B_IN_Queue for exception messages(with MSG_TYPE='3'), need to listen to success messages for logging.
But B2B_IN_Queue/B2B_Out_Queue seems to be point-point queues, in which case the messages are removed after the XEngine successfully processes it and the custom BPEL component which I have deployed to listen to these queues do not get to pick these success messages.
Is there any way we can change this queue configuration to topic, so that the logging BPEL can also pick this message?

Hi Ganesh,
1. Should I configure a AS2 listening channel or it is received on /b2b/httpReceiver?It should be received via /b2b/httpReceiver.
2. How to unit test receiving a document using AS2 channel? Is there a tool to send AS2 messages to a particular b2b server (how to set AS2 identifier?)Use another B2B setup (may be a fresh local setup or a new domain in existing installation) to simulate your trading partner
3. ssl and encryption is next step, but I would like to test basic connectivity first. Is it possible?Yes, just do not select anything in security tab of AS2 channel.
Regards,
Anuj

Similar Messages

Data not reaching SOA from B2B

Hi All,
i have configured a generic file listening channel. B2B is picking up the file succesfully and it is also getting processed succesfully without any error
But data is not getting read by the B2b adapter(configured in default mode) which i have configured in SOA layer neither i can see in the queue(IP_IN_Queue). if i undeploy the soa process then i am able to see the data in IP_IN_Queue.
Strangely, if instead of generic file channel, if i configure my trading partner to listen the data using MLLP over TCP. then data is getting read by SOA layer.
Now i have a couple of questions:
1. In B2b 11g, we have 4 queues, IP_IN_Queue, IP_OUT_Queue , B2B_IN_Queue, B2B_OUT_Queue. Now which of these are used by B2b to pass data to soa in default configuration.
2. Why in case of generic file listeing channel my SOA composite is not receiving the data from B2B.
Regards,
Saurav Singla

Hi Anuj,
I have checked the application message. Application message does not have any detail about the composite instance or any location where its dumping the data.
In diagnostic logs i can find the following error.
[oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@466f92] [userId: <anonymous>] [ecid: 74f716a25b8ba015:-4fb641d9:130ae246230:-8000-00000000000043a5,0] [APP: soa-infra] Error -: B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.[[
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToFabric(MessageHandler.java:1588)
     at oracle.tip.b2b.msgproc.MessageHandler.doDeliverMessageToDestination(MessageHandler.java:629)
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:246)
     at oracle.tip.b2b.msgproc.Request.putMsg(Request.java:690)
     at oracle.tip.b2b.msgproc.Request.continueRequest(Request.java:500)
     at oracle.tip.b2b.msgproc.Request.incomingRequest(Request.java:421)
     at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:2819)
     at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1660)
     at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4047)
     at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3687)
     at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3160)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:619)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:220)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:323)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1664)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1555)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1487)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1328)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at oracle.tip.b2b.utility.XMLUtil.parseDocument(XMLUtil.java:130)
     at oracle.tip.b2b.utility.XMLUtil.parseDocument(XMLUtil.java:146)
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToFabric(MessageHandler.java:1190)
     ... 15 more
oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:323)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1664)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1555)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1487)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1328)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at oracle.tip.b2b.utility.XMLUtil.parseDocument(XMLUtil.java:130)
     at oracle.tip.b2b.utility.XMLUtil.parseDocument(XMLUtil.java:146)
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToFabric(MessageHandler.java:1190)
     at oracle.tip.b2b.msgproc.MessageHandler.doDeliverMessageToDestination(MessageHandler.java:629)
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:246)
     at oracle.tip.b2b.msgproc.Request.putMsg(Request.java:690)
     at oracle.tip.b2b.msgproc.Request.continueRequest(Request.java:500)
     at oracle.tip.b2b.msgproc.Request.incomingRequest(Request.java:421)
     at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:2819)
     at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1660)
     at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4047)
     at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3687)
     at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3160)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:619)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:220)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToFabric(MessageHandler.java:1588)
     at oracle.tip.b2b.msgproc.MessageHandler.doDeliverMessageToDestination(MessageHandler.java:629)
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:246)
     at oracle.tip.b2b.msgproc.Request.putMsg(Request.java:690)
     at oracle.tip.b2b.msgproc.Request.continueRequest(Request.java:500)
     at oracle.tip.b2b.msgproc.Request.incomingRequest(Request.java:421)
     at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:2819)
     at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1660)
     at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4047)
     at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3687)
     at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3160)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:619)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:220)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:323)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1664)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1555)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1487)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1328)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
     at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
     at oracle.tip.b2b.utility.XMLUtil.parseDocument(XMLUtil.java:130)
     at oracle.tip.b2b.utility.XMLUtil.parseDocument(XMLUtil.java:146)
     at oracle.tip.b2b.msgproc.MessageHandler.deliverMessageToFabric(MessageHandler.java:1190)
     ... 15 more
It looks like dat errro is coming while delivering message to fabric.
But i have no idea why this error is coming because with the same configuration and ecs files, when i am sending the data through MLLP, its working perfectly fine.

Default Exception Handling in B2B

Hi All,
Need your help and advise on the below requirement we have currently:
Source system sends an XML input to MW and therein, we transform it into PO_850 XSD and sends it to B2B. We are validating the XSD in B2B and then generating an EDI_PO_850 file and sending it to the Trading Partner. We are going to have 5 different Target Trading Partner. I have 2 questions w.r.t the default exception handling in place for Oracle B2B:
1. Which Queue will have the Error Information for the above case? B2B_IN_Queue/B2B_OUT_Queue/B2B_IP_IN_Queue
2. We would like to consume the error messages specific to a trading partner from the JMS Queue directly, how can we achieve it?
Appreciate your help in this regard.
Thanks in Advance
Priyanka

Hi Priyanka
B2B operates in two modes for default internal queue communication - AQ and JMS. This is controlled in the Admin/Configuration page "use JMS queues" checkbox.
In AQ, the queue to which the exception message is delivered would be IP_IN_QUEUE
In JMS the queue to which the exception message is delivered would be B2B_IN_QUEUE. Since you speak about reading error message from the JMS queue directly, am thinking this would be the one of interest to you.
In addition to the above we can create custom JMS internal delivery queue and this can be associated to the Exception Queue which can be assigned in the Admin/Configuration page.
With regards to reading the exception msg specific to the trading partner from the JMS Queue directly, this can be done by adding a check on the dequeue process. Each exception message is populated with From_Party and To_Party information. In the outbound delivery case, the exception message should have To_Party set as the partner's name. This can be checked.
Hope that helps.
Regards
Arun

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Logical database in adhoc query

Hello All,
Can anyone tell me what is the logical database in adhoc query?

Hi
When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
Infosets are created from Transaction SQ02.
There can be four methods through which an Infoset can become a source of data:
1. Table join ( By joining two or more tables from Data dictionary)
example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
Custom Logical DBs can be created in T_Code SE-36.
4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
Reward Points, if helpful.
Regards
Waseem Imran

Query help on Goods Receipt Query with AP Invoice

Looking for a little help on a query. I would like to list all the goods receipts for a given date range and then display the AP Invoice information (if its been copied to an AP Invoice). I think my problem is in my where clause, I plagerized an SAP query to show GR and AP from a PO as a start. SBO 2005 SP01. Any help would be great appreciated. Thanks
SELECT distinct 'GR',
D0.DocStatus,
D0.DocNum ,
D0.DocDate,
D0.DocDueDate,
D0.DocTotal,
'AP',
I0.DocStatus,
I0.DocNum ,
I0.DocDate,
I0.DocDueDate,
I0.DocTotal,
I0.PaidToDate
FROM
((OPDN D0 inner Join PDN1 D1 on D0.DocEntry = D1.DocEntry)
full outer join
(OPCH I0 inner join PCH1 I1 on I0.DocEntry = I1.DocEntry)
on (I1.BaseType=20 AND D1.DocEntry = I1.BaseEntry AND D1.LineNum=I1.BaseLine))
WHERE
(D1.BaseType=22 AND D1.DocDate>='[%0]' AND D1.DocDate<='[%1]')
OR (I1.BaseType=20 AND I1.BaseEntry IN
(SELECT Distinct DocEntry
FROM PDN1 WHERE BaseType=22 AND DocDate>='[%0]' AND DocDate<='[%1]'))

Hi Dalen ,
I believe it is because of the condition
(D1.BaseType=22 AND D1.DocDate>='%0' AND D1.DocDate<='%1')
OR (I1.BaseType=20 AND I1.BaseEntry IN
(SELECT Distinct DocEntry FROM PDN1 WHERE PDN1.BaseType=22 AND DocDate>='%0' AND DocDate<='%1'))
Try changing
D1.BaseType=22 OR D1.DocDate>='%0' AND D1.DocDate<='%1
PDN1.BaseType=22 OR DocDate>='%0' AND DocDate<='%1'))
Lets see what would be the result . Lets have some fun with troubleshooting
See what would be the difference in the result .
Thank you
Bishal

Can you check for data in one table or another but not both in one query?

I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID     Name
123               John Doe
124               Jane Donaldson
125               Harold Douglas
MARKETER_ACCOUNT
Key     AccountID     Marketer    StartDate     EndDate
1001     123               10526          8/3/2008     9/27/2009
1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
1023     124               10541          12/03/2010     12/31/4712
ARCHIVE
Key     AccountID     Marketer    StartDate     EndDate
1015     124               10526          8/3/2008     12/02/2010
1033     125               10987         01/01/2011     01/31/2012
So my query needs to return the following:
123     John Doe                        10526     8/3/2008     9/27/2009
124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
          select AccountID
          from
                 ACCOUNT A,
                 MARKETER_ACCOUNT M,
                 ARCHIVE R
           where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                where M2.AccountID = A.AccountID),
                                                  (select max(R.EndDate) from Archive R2
                                                where R2.AccountID = A.AccountID)
               and upper(A.Name) like parameter || '%'
<can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)

if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
    id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
     , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
     , a.name
     , b.MktKey
     , b.FromDt
     , b.ToDate
from account a
join filtered_basedata b
    on (a.id = b.AccountId)
ID NAME                     MKTKEY FROMDT     TODATE
123 John Doe                  10987 28.09.2009 31.12.4712
124 Jane Donaldson            10541 03.12.2010 31.12.4712
125 Harold Douglas            10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin

Query help : Query to get values SYSDATE-1 18:00 hrs to SYSDATE 08:00 hrs

Hi Team
I want the SQl query to get the data for the following comparison : -
Order Created is a Date Column , and i want to find out all the values from (SYSDATE-1) 18:00 hours to SYSDATE 08:00 hours
i.e.
(SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 08:00:00.
Regards

Hi, Rohit,
942281 wrote:
If i want the data in the below way i.e.
from (SYSDATE-1) 18:00 hours to SYSDATE 17:59 hours ---> (SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 07:59:00.If you want to include rows from exactly 18:00:00 yesterday (but no earlier), and exclude rows from exatly 08:00:00 today (or later), then use:
WHERE   ord_dtl.submit_dt >= TRUNC (SYSDATE) - (6 / 24)
AND     ord_dtl.submit_dt < TRUNC (SYSDATE) + (8 / 24)
So can i use the below format : -
ord_dtl.submit_dt BETWEEN trunc(sysdate)-(6/24) and trunc(sysdate)+(7.59/24) . Please suggest . .59 hours is .59 * 60 * 60 = 2124 seconds (or .59 * 60 = 35.4 minutes), so the last time included in the range above is 07:35:24, not 07:59:59.
If you really, really want to use BETWEEN (which includes both end points), then you could do it with date arithmentic:
WHERE   ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - (6 / 24)
                  AND         TRUNC (SYSDATE) + (8 / 24)
                                           - (1 / (24 * 60 * 60))but it would be simpler and less error prone to use INTERVALs, as Karthick suggested earlier:
WHERE   ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - INTERVAL '6' HOUR
                  AND         TRUNC (SYSDATE) + INTERVAL '8' HOUR
                                           - INTERVAL '1' SECONDEdited by: Frank Kulash on Apr 17, 2013 9:36 AM
Edited by: Frank Kulash on Apr 17, 2013 11:56 AM
Changed "- (8 /24)" to "+ (8 /24)" in first code fragment (after Blushadown, below)

Query help, subtract two query parts

Hi,
I am beginner of PL/SQL and have a problem I couldn’t solve:
Table (op_list):
Item     -     Amount -     Status
Item1     -     10     -     in
Item2     -     12     -     in
Item3     -     7     -     in
Item1     -     2     -     out
Item2     -     3     -     out
Item1     -     1     -     dmg
Item3     -     3     -     out
Item1     -     2     -     out
Item2     -     5     -     out
Item2     -     2     -     in
Item3     -     1     -     exp
Would like to get result of query (subtract amount of 'out/dmg/exp' from 'in' ):
Item - Amount left
Item1     -     5
Item2     -     6
Item3 -     3
I wrote code that returns sum of all incoming items and sum all out/dmg/exp items, but couldn’t solve how to subtract one part of querry from another. Or maybe there is a better way. Also worried what happens if there is no 'out/dmg/exp' only 'in'
select item.name, sum(op_list.item_amount)
from op_list
inner join item
on op_list.item = item.item_id
where op_list.status = 'in'
group by item.name
union
select item.name, sum(op_list.item_amount)
from op_list
inner join item
on op_list.item = item.item_id
where op_list.status = 'out'
or op_list.status = 'dmg'
or op_list.status = 'exp'
group by item.name
Return:
Item1     -     10      [10 in]
Item1     -     5     [2+1+2]
Item2     -     14     [12+2]
Item3     -     7
Item3     -     4     [3+1]
Thanks in advance

Hi,
We can also use simple inline views to get what we need.
select a.item,a.amount-b.amount Balance from
(select item,sum(amount) Amount from op_list
where status = 'in'
group by item) a,
(select item,sum(amount) Amount from op_list
where status in ('out','dmg','exp')
group by item) b
where
a.item=b.item
order by item;
ITEM       BALANCE
Item1                      5
Item2                      6
Item3                      3Regards,
Prazy

Query help: query to return column that represents multiple rows

I have a table with a name and location column. The same name can occur multiple times with any arbitrary location, i.e. duplicates are allowed.
I need a query to find all names that occur in both of two separate locations.
For example,
bob usa
bob mexico
dot mexico
dot europe
hal usa
hal europe
sal usa
sal mexico
The query in question, if given the locations usa and mexico, would return bob and sal.
Thanks for any help or advice,
-=beeky

How about this?
SELECT NAME
FROM    <LOCATIONS_TABLE>
WHERE   LOCATION IN ('usa','mexico')
GROUP BY NAME
HAVING COUNT(DISTINCT LOCATION) >= 2Results:
SQL> WITH person_locations AS
2 (
3          SELECT 'bob' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
4          SELECT 'bob' AS NAME, 'Mexico' AS LOCATION FROM DUAL UNION ALL
5          SELECT 'dot' AS NAME, 'Mexico' AS LOCATION FROM DUAL UNION ALL
6          SELECT 'dot' AS NAME, 'Europe' AS LOCATION FROM DUAL UNION ALL
7          SELECT 'hal' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
8          SELECT 'hal' AS NAME, 'Europe' AS LOCATION FROM DUAL UNION ALL
9          SELECT 'sal' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
10          SELECT 'sal' AS NAME, 'Mexico' AS LOCATION FROM DUAL
11 )
12 SELECT NAME
13 FROM    person_locations
14 WHERE   LOCATION IN ('USA','Mexico')
15 GROUP BY NAME
16 HAVING COUNT(DISTINCT LOCATION) >= 2
17 /
NAM
bob
salHTH!
Edited by: Centinul on Oct 15, 2009 2:25 PM
Added sample results.

QUERY HELP!!! trying to create a query

i'm creating a summary report
i have a table with sale dates
for example i have a table tab_1 and column saleDate as
saleDat
1923
1936
1945
2003
2005
saleDate contains years and there are some missing years where no sale
was made
My report has to display years starting from earliest year
so i have to create a query that starts with 1923
but the problem is that I have to have years that are not in table.
for example i have to display years 1924 which is not in table
so the part of report has to look like
1923 blah blah summary.........
1924 "
1925
1926
2005
2006
upto current year (2006 may not be in the table, but i have to display)
i just need to know the query that can query all the years starting from
the ealiest saleDate to current year
thanks in advance

Please write the query in the following form:
SELECT a.year, --- place other columns from your table.
FROM (SELECT (:start_num + rownum) year
FROM all_tab_columns
WHERE :start_num + rownum <= :end_num) a,
tab_1 b
WHERE a.year = b.saleDat(+);
Note:
1) if your start year and end year are 1923 and 2006. Then input as below:
:start_num = 1922
:end_num = 2006
2) Since for some of the years (1924 etc) may not be there in your so you may need to use NVL to print proper indicators.
3) If you have more than one record in tab_1 for a particular year then group them based year and then use it.
Hope this helps.
- Saumen.

IF statement in Query

Hi
I have a query / recordset that would be looking at 12000 rows in a database and 10 different variables and potential filters chosen by end users.
Should I put 10 wild card / url Where statements in my recordset query or should I put IF statements in my query.
ie.
If URL colname then ",and BetType= "xzz"" .
Is that the most efficient way to run my queries.
I will be running about 10 recordsets on my page all looking at these url variables so it will be a busy page.
If that is the answer can someone please tell me how to insert the if statement - i've tried allsorts but it wont work.
$colname_Recordset4 = "%";
if (isset($_GET['colname'])) {
$colname_Recordset4 = $_GET['colname'];
mysql_select_db($database_racing_analysis, $racing_analysis);
$query_Recordset4 = sprintf("SELECT BetType, sum(if(season='2006-2007', Bet, 0)) AS '2006-2007', sum(if(season='2007-2008', Bet, 0)) AS '2007-2008', sum(if(season='2008-2009', Bet, 0)) AS '2008-2009' FROM dataextract WHERE BetType Like %s and TrackID = 1 and Distance = 1000 and Class = 1 GROUP BY BetType", GetSQLValueString($colname_Recordset4, "text"));
$Recordset4 = mysql_query($query_Recordset4, $racing_analysis) or die(mysql_error());
$row_Recordset4 = mysql_fetch_assoc($Recordset4);
$totalRows_Recordset4 = mysql_num_rows($Recordset4);
hope someone can help.
Simon

That part of the query cross tabs my data into three columns - not intended to confuse the issue. I'd have the same problem with a basic query.
So Here is a very basic version:
I want an IF statement to go around: "WHERE Distance = 1000" and "AND Class = 1"
That I believe will reduce the effort on the MYSQL Server as it wouldn't be running a bunch of wild card queries and would only run if there is a URL paramter delivered.??
I just don't get how to put the IF statements in PHP.
thanks
$maxRows_Recordset3 = 5;
$pageNum_Recordset3 = 0;
if (isset($_GET['pageNum_Recordset3'])) {
$pageNum_Recordset3 = $_GET['pageNum_Recordset3'];
$startRow_Recordset3 = $pageNum_Recordset3 * $maxRows_Recordset3;
mysql_select_db($database_racing_analysis, $racing_analysis);
$query_Recordset3 = "SELECT * FROM dataextract WHERE Distance = 1000 AND Class = 1";
$query_limit_Recordset3 = sprintf("%s LIMIT %d, %d", $query_Recordset3, $startRow_Recordset3, $maxRows_Recordset3);
$Recordset3 = mysql_query($query_limit_Recordset3, $racing_analysis) or die(mysql_error());
$row_Recordset3 = mysql_fetch_assoc($Recordset3);
if (isset($_GET['totalRows_Recordset3'])) {
$totalRows_Recordset3 = $_GET['totalRows_Recordset3'];
} else {
$all_Recordset3 = mysql_query($query_Recordset3);
$totalRows_Recordset3 = mysql_num_rows($all_Recordset3);
$totalPages_Recordset3 = ceil($totalRows_Recordset3/$maxRows_Recordset3)-1;

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Query on B2B_In_Queue/B2B_Out_Queue

Similar Messages

Maybe you are looking for