Query on BDC Screens

Hai All,
My Problem is : Creating Pricing conditions using BDC.
My Questation is : I have a doubt on scale screens, I am using 031 Screen for
Value scale and 0303 Screen for quanty scale.
Why and When we are using Screen 0300. 
Standard Program is : RV14BTCI , I checked the standard program but i did not understand. Can any one help me.
Thanks,
Naga.

I have tested your program up to the BDC part, looks like you program is uploading the data and putting it in to the RECORD internal table correctly. This leads me to believe that the problem is in the BDC code itself. As Srinivas has suggested, run the program with mode "A". You can set this in the selection screen. Currently it is mode "N". Mode "A" will allow you to see all of the steps that the BDC is doing and you can find out what the error is at that time.
Regards,
Rich Heilman

Similar Messages

BDC screen resolution

How to do screen resolution in BDC table control ?

so there so many threads for screen resolution check it
how to solve screen resolution in bdc
Screen Resolution in Bdc
How to make screen resolution independent in BDC
Re: Screen Resolution problem in BDC
screen resolution problem in table control
whats the screen resolution problem with bdc's how to solve it?
Screen Resolution Problem in Session Method

Query For Btach Screen

Hi Experts
I need query for Batch Screen
When we make Delivery Document then Batch Screen appear for selection batch here three windows are appear query for selection batch screen here we have enter manually quantity i need FMS for this quantity automatic appear when click on FMS
BR
Manish

Hello Manish,
it is easy like given bellow syntex,
Every think is possible
Select $[$4.3.number]
Thanks
Manvendra Singh Niranjan

Selecting fields in BDC screens

Hai,
   Can we select fields(check boxes) from BDC screen if so, tell me how can we select fields in BDC programming.
                                           Thank you in advance

Hai,
    as u said that we can select check boxes while recording, but my problem is i'm using this procedure in creating STO delivery in VL10B, here we enter ship-to party and date as input and in second screen we click on show/hide documents button and after that we check the STO document no. which was created for our suppl. plant on given date and press background button, so here my problem is STO document no. place is getting changed every time.
                      Thank you can you once verify recording for VL10b.

Can not select and delete a query in the screen designer

I am getting mad with that problem...
The problem is that I had a query(query1) based in another query(query2), both created in the query designer.
I think some changes been made to query2 so query 1 was giving some erros.
I am trying to delete query 1, but it still appears in the data sources.
And when I try to erase it from the screens, when I select the query visual studio closes...
So please, how can I erase that query definitely?
Thank you for your help!

Hi promqueen,
Thank you fro posting in MSDN forum.
Since this forum is to discuss: visual studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer
Documentation and Help System, and Visual Studio Editor. So I am afraid that this issue is out of support range of this forum.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Not getting BI query variable selection screen for few test users

Hi,
i am having problem when i am executing the reports. i am not getting variable screen for the test users ID's. but i am getting the screen when when 0BI_ALL authorization selected.
i want role based authorization, and not complete authorization.
the parameters in su01 are scl(X) and wlc(X X XX X)
Thanks,

Can you please check into Infoobject Maintenance screen in Bex Tab i.e. Query Execution Filter Value Selection. assign "Values from Masterdata Table".
Try again and let me know.
Nagesh Ganisetti.

Sap query report-selection screen modification

Hi
I have created a SAP query report using the logical database KDF ,the selection screen was created automatically.For vendor report open item and Cleared item Push button would be there in FBL1N but here it only displays Open key date,clearing dates.The open key date is mandatory to give though i give clearing dates as i need vendor cleared items.
Is ther way to change the selection screen to get the option open item and cleared item push button as in FBL1N.
This is because i was filtering a vendor only for particular doc type only for clearing items but report takes open item too though i meantioned clearing date rate.How to modify the selection screen in sap query report when Logicaldatabase is selcted.

I need to get only the cleared items.I donot need open items.Then if go for BSIK is it wrong.Should go only for BSAK.
I couldnt find the table BSAK in logical database KDF.
Edited by: mysap query on Mar 18, 2009 3:15 PM
Edited by: mysap query on Mar 18, 2009 3:15 PM

Infoset query ('At Selection-Screen') - Urgent

Hi All,
The below code for selection criteria 'At Selection-Screen' for an infoset-query works ok, but i find 2 problems, can someone help.
1. When user presses F4, i wanted the output to display
   SG Singapore
   IN   India
   But at the moment it just displays
   SG
   IN
2. If the user enters any other value apart from the above 2 i do not want the query to execute, instead show something like enter a valid value. But at the moment if i enter another country code manually just to test eg: US, the query runs with this selection which i do not want.
Hope my problem is clear, await inputs.
Code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR VEN_CTY-LOW.
        IT_LAND-VEN_CTY = 'SG'.
        IT_LAND-LTEXT   = 'Singapore'.
          APPEND IT_LAND.
        IT_LAND-VEN_CTY = 'IN'.
        IT_LAND-LTEXT   = 'India'.
          APPEND IT_LAND.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD   = 'VEN_CTY'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = IT_LAND
      RETURN_TAB = IT_RETURN
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2.
IF SY-SUBRC = 0.
    READ TABLE IT_LAND INDEX 1.
    MOVE IT_RETURN-FIELDVAL TO VEN_CTY-LOW.
ENDIF.

Hi vivek,
for the 2nd problem,
create a range for ingapor and india say r_range.
and
r_range will have two values say india, singapore.
loop at VEN_CTY.
if ven_cty not in r_range.
display error message.
exit.
endloop.
try this and let me know.
reward if helpful.
thanks .
ranya

Query views - selection screen fields double

Hi expects,
BW 3.5 SP13.
Do you know why I have double fields in WEB report selection screen ? example Month/year ?
In WEB properties I flag 'Display same variables only once'.
I have a WEB report with one table based on a query and with two charts based on query views from the query. Some fields are mandatory in selection screen Month/year.
Br,
Ole Paludan

Hi,
It's query views based on same query also use in WEB report, so variables are the same.
Query view Purpose: to get fewer key figures to charts - but still by query show all key figures in table.
BR,
Ole

BDC screen fields differ from one to another

Hi,
I want to do a recording for tcode KE21. When we run KE21 it has nearly 21 fields on the first screen. But when i do the recording for KE21 using SHDB, the number of fields are just 12 on the first screen. So after the recording, I am getting the error saying that field mismatch or similar to that. I dont want to use KE21N. There is no 'POSITION' button like what we find in VA01. How to solve this?
Thanks
Vijay

Vijay,
There may be a difference in the screens that you see when you execute the transaction normally and via SHDB for recording. But from a functionality aspect, the SHDB also should cover all the options that you are looking for. This is primarily because the BDC runs in the background and might differ in the way it runs in the foreground.
Regards,
Ravi
Note - Please mark the helpful answers

Query on bdc program

hi friends,
I really have doubt on bdc program. I wantedto complete this task.
1. Create a BDC program for the following
- Read a flat file containing Vendor Master details (keep the record structure as simple as possible). The file should contain a list of Vendors to be created in the SAP system.
- Using BDC technique, create the Vendor master using FK01 transaction
- Repeat the steps for creating all Vendors listed in the file. For each transaction, print out if the BDC was successful or not, and if successful print out the Vendor Number that was created.
but nothing is woking out.
I jus wnated to know what was my mistake.
I would provide my screen shots with expalnations for each and ery step.
Kindly please anyone of help me to know my mistake and to get the program done. i need to finish this by today since theres a lot of pressure in my work place.
Pls provide me ur mail id to send my documents as attachmnents..
I would be very thankful for your timely help.
Thanks in advance
rinky123

I have tested your program up to the BDC part, looks like you program is uploading the data and putting it in to the RECORD internal table correctly. This leads me to believe that the problem is in the BDC code itself. As Srinivas has suggested, run the program with mode "A". You can set this in the selection screen. Currently it is mode "N". Mode "A" will allow you to see all of the steps that the BDC is doing and you can find out what the error is at that time.
Regards,
Rich Heilman

Query regarding selection screen

Hi experts,
I have a requirement that once I get my output on a selection screen, suppose it has just 1 row and 4 columns. If I click on each of these 4 columns, a new transaction/report etc. needs to be called. How can I achieve this functionality?
Thanks,
Ajay.

Hi,
Say you have an internal table with fields as:
VBELN (sales order)
POSNR (sales order line item)
WERKS (plant)
MATNR (matnr)
And you write all these fields on output screen using reporting and when you click on any column field then a particular transaction/report should be called, then follow the below mentioned logic:-
DATA : BEGIN OF it_final OCCURS 0,
 vbeln TYPE vbap-vbeln,
 posnr TYPE vbap-posnr,
 werks TYPE vbap-werks,
 matnr TYPE vbap-matnr,
 END OF it_final.
DATA : fldname(25) TYPE c,
 fldvalue(25) TYPE c.
START-OF-SELECTION.
"select query into it_final internal table
AT LINE-SELECTION.
GET CURSOR FIELD fldname VALUE fldvalue.
CASE fldname.
 WHEN 'IT_FINAL-VBELN'.
 WRITE : / fldvalue.
 "code to call transaction/report
 WHEN 'IT_FINAL-POSNR'.
 WRITE : / fldvalue.
 "code to call transaction/report
 WHEN 'IT_FINAL-WERKS'.
 WRITE : / fldvalue.
 "code to call transaction/report
 WHEN 'IT_FINAL-MATNR'.
 WRITE : / fldvalue.
 "code to call transaction/report
ENDCASE.
END-OF-SELECTION.
ULINE.
FORMAT HOTSPOT.
LOOP AT it_final.
 WRITE : /1 it_final-vbeln, 10 it_final-posnr, 20 it_final-werks, 30 it_final-matnr.
 HIDE : it_final-vbeln, it_final-posnr, it_final-werks, it_final-matnr.
ENDLOOP.
ULINE.
Now to call a transaction user:-
SET PARAMETER ID '<param_id>' FIELD '<field_value>'.
CALL TRANSACTION '<t_code>' AND SKIP FIRST SCREEN.
To call a report use:-
SUBMIT <report_name> WITH <parameter_name1> = <field_value1>
 WITH <parameter_name2> = <field_value2>
 "and so on use parameters
 AND RETURN.
<paramater_name> refer to the parameter of the called report <report_name>
and <field_value> refer to value for the parameter to be passed.
Hope this helps you.
Regards,
Tarun

SAP Query and selection screen fields

Hi,
I am currently modifying a Query. I have added a new selection field. The fieldname for this selection field has been autogenerated within the query and I have pasted a bit in here:
SELECT-OPTIONS SP$00015 FOR ZERROR_FLG LOWER CASE.
SELECT-OPTIONS SP$00022 FOR KNA1-ERDAT.
SELECT-OPTIONS SP$00023 FOR KNA1-ERNAM.
SELECT-OPTIONS SP$00027 FOR ZLOEVM LOWER CASE.
SELECT-OPTIONS SP$00030 FOR ZPARTNERNO
NO INTERVALS NO-EXTENSION.
I relation to this select -option, I want to execute a few lines of code that only is executed if the user has filled in a value in teh ZPARTNERNO field. However, no matter if I use the field name ZPARTNERNO or SP$00030 it has no effect.
Any good ideas ?

HI,
In the AT SELECTIOn-SCREEN event, you can write the code
IF not SP$00030[] is initial.
write the code which you want to execute before the output
ENDIF.
if you want in START-OF-SELECTION>
IF not SP$00030[] is initial.
write the code which you want to execute before the output
ENDIF
Regards
Sudheer

SAP Query DB - Selection screen

Hi!
I am workin with a DB for SAP Query. I tried it and there is just one problem: In the report selection screen there is a field (from the DB) that is mandatory. I wanted to exclude that field or at least to make it not mandatory. Is it possible? How?
Thank you

Hi,
Go to SQ01. Input your Query. Press change button. Press Basic list. In the left side you will see check box for list fields and selection fields. Remove the check box for whatever field you dont wan in the selection screen.
Thanks,
Senthil

BDC Screen Problem

Hi All,
I made a BDC in foreground mode for tcode 'IW21' it is working fine but problem is that there are 3 screen coming in foreground while user want to see only last screen with input data and first two screen must not display to user, can anyone please help me? how can i execute first two screen in Bckground and last one in foreground?
regards,

Hello,
Use the mode 'E' for this. Fill the values for the first 2 screens in the program and leave the data for the the required screen blank. This will be interpreted as a error and the BDC will stop directly at this screen filling the previous screens.
Vikranth

Query on BDC Screens

Similar Messages

Maybe you are looking for