Query on CRM Campaign Determination in ECC

Hi Friends,
Can anyone help me with a doubt on campaign determination in ECC?
My query is 'what happens during campaign determination in SAP ECC Sales Orders, if we have multiple CRM campaigns hits for the same access sequence?". Does the system give a pop-up and allow the user to select one of them? Or is there any other way the system deals with this?
Any inputs are highly appreciated. Kindly help.
Thanks in advance !
Neeraj Sharma

Hi Neeraj,
if multiple campaigns are determined for an item they are basically all assigned to that item: see http://help.sap.com/erp2005_ehp_04/helpdata/EN/da/145142a238bd30e10000000a155106/content.htm for further details.
Best Regards,
Michael

Similar Messages

CRM Campaign determination on R/3 sequence access

Hi all,
into my CRM system, I use Trade Promotion object. The access sequence are present into R/3 system:
SPRO > Integration with Other SAP Components > Customer Relationship Management > Basic Functions > Campaign Determination > Maintain Access Sequences.
Into Accesses folder, is present a 'Requirement' column, but, How can I use VOFM transaction for create a new requirement? This transaction is correct?
Plese, could you give me any suggests?
Thanks,
Andrea

Dear Diogo (myself!) and Sara,
After some hard work finally the answer is clear. It is possible to have campaign determination in R3 sales order for an marketing trade promotion (without customer or pricing conditions).
As an example if there is a trade promotion for indoors(publicity) and no pricing discount or free goods, you can have this campaign determined in correspondent sales orders.
Indeed it is necessary to used conditions technique but not pricing condition in CRM trade/spends tab.
Please reward points if it helped.
Best Regards,
Diogo

Campaign Determination in ECC sales Orders

Hi Experts,
I'm able to configure the campaign determination correctly and is working fine for single customer and product. Now my requirment is that I need to configure for a group of customers. So in that case I will create a target group. But when I check the ECC system to see if there is a field "Target Group" availabe in the Condition table maintenance it does not exist. So can any one help me how to configure this situation.
Regards
Vinod

Hi Vinod,
you might want to review http://help.sap.com/saphelp_crm70/helpdata/EN/46/01a0078aa1703fe10000000a155369/content.htm. In Ecc field catalogue for campaign determination there is the field TARGET_GROUP_ID available, which you can use to setup your condition table.
Hope this helps.
Best Regards,
Michael

How to link CRM Campaign to ECC Sales Orders

Dear all,
How to see Sales (R/3) that happened as a result of Specific CRM Campaign execution.
while creating R/3 Sales Order where do we refer relevant Campaign ID.
In SAP how to analyse with respect to Budget, Cost and Actual Sales for a Campaign.
In Campaign where do we enter Budget and Cost information and how will it synchronize with R/3 system for revenue analysis purpose.
What is the standard solution for this and what is the required landscape for this.
Please help me to resolve the above issues, Each suggestion will be highly appreciated.
Best regards
Raghu ram

Hi Raghu,
You have to do the configuration related to Campaign Determination for geting the campaign Id in ECC sales Order.
Pls find the related link to do the configuration
http://help.sap.com/saphelp_crm40/helpdata/en/6b/160ade5eda5b42a0d756961f99a2a1/content.htm
Regards
Vinod

Campaign determination in R/3 based in CRM campaigns

Hi,
We have CRM4.0.
Can you confirm me if I create a campaign in CRM with planned dates without condition records when I create a sales order in R/3 that campaign is determined automatically? Or the R/3 only works with pricing/condition campaigns?
Thanks and Regards,
SF

Dear Diogo (myself!) and Sara,
After some hard work finally the answer is clear. It is possible to have campaign determination in R3 sales order for an marketing trade promotion (without customer or pricing conditions).
As an example if there is a trade promotion for indoors(publicity) and no pricing discount or free goods, you can have this campaign determined in correspondent sales orders.
Indeed it is necessary to used conditions technique but not pricing condition in CRM trade/spends tab.
Please reward points if it helped.
Best Regards,
Diogo

Campaign Determination

Hello All,
We are configuring campaigns in Webshop. CRM 2007 with ECC 6.0. I have some of the questions as mentioned below. I would really appreciate if you guys could help me out.
1. If the entry of campaign codes on the Sales Orders/Webshop Order is Manual, DO we STILL Need to configure Campaign Determination?
2. Does the condition types of type PR(pricing) need to have condition tables that has Campaign GUID field in them?If So does campagn GUId field needs to be the key?
3. What is the best Practice of creation campaign Determinations conditioj records. is it from ECC-CRM or from CRM-ECC?
4. If the condition records are to be created in ECC-CRM, then in Campaigns what is the discount tab for?
5. Where is the connection that says given a Campaign, execute this pricing?
6. preferable 1 small example with both PR and CD, how they work together, would be really helpful.

anybody has any idea about this ?

Campaign Determination - Sales Order

Hi Experts,
Can we do campaign determination at Sales Order level, if yes can any one pls let me know how to do the settings in SAP CRM 2007.
Thanks in advance.
Regards
Vinod

Anyone has any suggestions/ideas for this?
Thanks
Alok

CRM Contract replicate to ECC Debite memo

HI expert team
In standard replication from CRM Contract replicate to ECC Debite memo, I have some material in ECC with Material type KMAT Configurial product, same material code and description created in CRM with material type as service material, When i create service contract and release it is giving replication error with "Product Cannot be recorded in ECC", When i create debite memo with same material code system creating debet memo and item category determination in ecc as debet memo item category in debete memo even though material is configural product,
in the same steps i have some service material in ECC as service material created with service material type, for these material i created in CRM with same code and description, when i create service contract system replicating as debit memo,
Thanks in advance
Regards
Rachappa
9448472121

Hi,
There are prerequisites to be maintained in CRM and ERP for CRM contract to be replicated in ERP as a debit memo.
Please find the details in the below link:
http://help.sap.com/saphelp_crm50/helpdata/en/65/9c4d3bcf95926ae10000000a114084/frameset.htm
In your case I assume Debit memo is not being created for the Service product and giveing error "Product Cannot be recorded in ECC", because system is finding the same product in ECC as configurable material type (Service product in CRM, config material in ECC).
As per the prerequisite Synchronization of master data (SAP CRM and SAP ERP) should be maintained
All business partners used in SAP CRM transaction documents also exist in SAP ERP.
Service products in SAP CRM exist as materials in SAP ERP.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Oct 8, 2009 6:12 AM
Edited by: Chethan Kumar C M on Oct 8, 2009 6:29 AM

Condiion type to Campaign determination

Hi gurus
I´m customizing Campaign Determination, then When I try to create a new condition type to the usage: CD (Campaign Deter.) system don´t let me select that option, always show me PR usage as default, Could someone tell was wrong???
Thanks a lot

Hi
Prakash, very helpful your link, now let me explain you what is my request: I need to check when a product is being used in other campaign/plan when a Camp/Plan is created (error or warning)???
Someone told me, I can use Campaign determination for it under below path:
In the CRM IMG follow the path > CRM> Marketing-> Marketing Planning and Campaign Management -> Condition Maintenance -> Define Condition Generation, using 02 as selection in "Conflit resolution value"
But my problem is why I can not create CD Condition Type
in CRM?
Please, tell me if there is another solution

Campaign determination in billing

Hi,
we have a market requirement wherein they want campaign determination to happen retroactively during billing.
the scenario is this:
1. order to goods issue is created
2. crm conditions are created
3. bill the order, taking into consideration the new crm conditions
thanks.

Hi Octavius,
Not sure if you have got this issue resolved.
You may want to check SAP Note 856313 (Campaign determination in the billing document), there is no campaign redetermination in billing, and that campaign determination should have been done in the sales order in the first place. Only the existing valid conditions in the sales order are passed to the billing document and not possible to re-determine campaign, so basically the sales order would have to be updated first.
The SAP note contains a workaround which executes a campaign determination when you create a billing document, via the following user exits:
Modify the billing user-exit (RV60AFZC) to set a campaign determination flag for pricing type and pre-defined free issue document type and item categories
Modify the billing user-exit (RV60AFZZ) to trigger campaign determination for billing documents using standard SAP function modules, based on the campaign determination flag
Hope this helps
Hian Ong

Campaign determination integrated scenario

Hi,
I am struggling with campaign determination Integrated scenario. I have followed help documentation for Campaign Determination in SAP ECC Order processing. I have created subscription for Campaigns, target groups and conditions (replication object cnd_m_sup). Campaigns and target groups are replicated ok to erp. Replication object cnd_m_sup seem to miss some data when I look at the content from smw01. KOND3 is not updated in erp and campaign determination is not taken place (we have debugged a bit and it seems that campaign determination would work if cond3 had been filled). Which publication/replication object fills kond3? Should cnd_m_sup fill kond3? Do anyone have any idea of which config is missing?
thanks for replying,
regards Camilla

Hi Octavius,
Not sure if you have got this issue resolved.
You may want to check SAP Note 856313 (Campaign determination in the billing document), there is no campaign redetermination in billing, and that campaign determination should have been done in the sales order in the first place. Only the existing valid conditions in the sales order are passed to the billing document and not possible to re-determine campaign, so basically the sales order would have to be updated first.
The SAP note contains a workaround which executes a campaign determination when you create a billing document, via the following user exits:
Modify the billing user-exit (RV60AFZC) to set a campaign determination flag for pricing type and pre-defined free issue document type and item categories
Modify the billing user-exit (RV60AFZZ) to trigger campaign determination for billing documents using standard SAP function modules, based on the campaign determination flag
Hope this helps
Hian Ong

Difference between SAP CRM Security and SAP ECC 6.0 security

Hi
I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
Can anyone please let me know the difference between CRM security compared to ECC security.
Thanks...

I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
really sad.....
The big difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
2) If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
E.g. transaction code BP allows you to create/change/display any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
another example is business transaction processing...which can be launched by:
a very generic transaction code: CRMD_ORDER
transaction category related transaction codes :e.g.
> CRMD_BUS2000126 for activity management
> CRMD_BUS200115 for Sales processes
Again...allowed activity is not controlled by the tcode, but on authorization object level...
3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links.... controlled by object UIU_COMP.
However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
cheers
Davy Pelssers

" Campaign determination " error in Trade Promotions

I am working on the Trade Promotion functionality on a Target Group . The conditions are getting generated and appearing in the discounts tab. Also the target group is picking up only the relevant BPs and showing them in the Volume/Trade Spend Tab but while releasing the Trade Promotion,I am receiving n error . "Campaign Determination records cant be generated "and "enter a hierachy business partner" . Since the Trade promotions on the BP hierarchy are being realased without errors , I am wondering ,is there any particular configration which needs to be done in specific for the Target Group as customer . Could anybody please help me in this regard?

Look into this and see if it helps: http://help.sap.com/saphelp_crm50/helpdata/en/c1/e60741375cf16fe10000000a1550b0/frameset.htm

How to create custom BOL object for dynamic query in CRM 7.0

Hi,
Could anyone please explain me with steps that how to create the custom BOL object for dynamic query in CRM 7.0, I did it in previous version but its throwing exception when i try to create the object of my dynamic query class. I just defined the entry of my in crmv_obj_btil to create the dynamic query BOL object. do i need to do any other thing also to make it work?
Regards,
Kamesh Bathla
Edited by: Kamesh Bathla on Jul 6, 2009 5:12 PM

Hi Justin,
First of thanks for your reply, and coming to my requirement, I need to report the list of items which are there in the dynamic select statement what am getting from the DB. The select statement number of columns may vary in my example for different countries the select item columns count is different. For US its '15', for UK it may be 10 ...like so, and some of the column value might be a combination or calculation part of other table columns (The select query contains more than one table in the from clause).
In order to execute the dynamic select statement and return the result i choose to write a function which will parse the cursor for dynamic query and then iterate the values and construct a Type Object and append it to the pipe row.
Am relatively very new for these sort of things, welcome in case of any suggestions to make it simple (Instead of the function what i thought to work with) also a sample narrating the new procedure will be appreciated.
Thanks in Advance,
mallikj2.

CRM 2007 integration with ECC 6.0

Hi Friends,
I am currently working on the CRM 2007 Web UI
I have created the copy of existing standalone CRM client which is already having products, organization, BP created in it.
Now I am planning to connect the CRM client with the ECC client.
Is there any special care i need to take while connecting both the systems?
Also while doing replication any extra care do I need to take?
Help will be definately rewarded?
Cheers,
Raj

Hi!
Check the SAP Best Practices documents
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
There have a look at
C71: CRM Connectivity
B09: CRM Customizing Replication
regarding the connection and replication
rollo

Query on CRM Campaign Determination in ECC

Similar Messages

Maybe you are looking for