Query on editing standard report ,adding dynamic selection screen

Hi All to Abap Guru's,
I am facing this requirement for the first time ..
My requirement is to add dynamic selections on the selection screen of a predefined report and make some changes in the output..
I want to change the standard prog for the t-code "FBL5N"
this t-code contains LDB so plz help me out..this is an urgency......
based on this I have more 5 requiremnts if u could help
me out in the first object then other four I can manage my self..
so plz give me the idea how to approach this requirement ..
awaiting for u r reply...
and whoever it may be plz give u r contact number(requesting)...so that i can be in touch with u...
regards,
Ravi V Ganji

Hi Ravi,
From the transaction itself you can find out the corresponding program name.
Make an Zcopy of this program and do the changes as per the requirement, means you can add Select-options or Parameters and change the program logic accordingly.
Find out where the WRITE statements are happened , add/ remove the fields according to the user requirement.
If find successful create a transaction code for it(SE93).
I think it will solve your problem.
Regards,
Antony Thomas

Similar Messages

Dynamic Selection Screen Fields

Hi All,
I have made a copy of the program FI_RFSOPO00. This report uses dynamic selection screen. I wanted to know the names of these dynamic selection screen. As I have to make some database selections based on the user entries in these fields.
Is there a way to find this out?
Regards,
Stephen

Hi Stephen,
1) FI_RFSOPO00 is unknown- i think you mean <b>RFSOPO00</b>
2) RFSOPO00 uses logical datbase SDF, which uses
free or dynmaic selections from the tables ska1,skb1
and bsis.
see F1 to <i>SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab </i> and ta SE36 to SDF too.
regards Andreas

How to call dynamic selection screen from another report

hi,
i have transaction ZFAGLL03.
it has got standard selection screen.. and dynamic selection screen...
i am calling this transaction from another report, now how do i display this dynamic selection screen.....

Try following code and see if it helps:
TYPE-POOLS : rsds.
TABLES:tgsb.
DATA: trange TYPE rsds_trange,
       trange_line
         LIKE LINE OF trange,
       trange_frange_t_line
         LIKE LINE OF trange_line-frange_t,
       trange_frange_t_selopt_t_line
         LIKE LINE OF trange_frange_t_line-selopt_t,
          trange_line1
         LIKE LINE OF trange,
       trange_frange_t_line1
         LIKE LINE OF trange_line-frange_t,
       trange_frange_t_selopt_t_line1
         LIKE LINE OF trange_frange_t_line-selopt_t,
       texpr TYPE rsds_texpr.
DATA: seltab TYPE TABLE OF rsparams WITH HEADER LINE,seltex TYPE rsds_texpr.
SELECT-OPTIONS:so_gsber FOR tgsb-gsber.
LOOP AT so_gsber.
   trange_line-tablename = 'FAGLFLEXA_FS'.
   trange_frange_t_line-fieldname = 'RBUSA'.
   MOVE-CORRESPONDING so_gsber TO trange_frange_t_selopt_t_line.
   APPEND trange_frange_t_selopt_t_line
   TO trange_frange_t_line-selopt_t.
ENDLOOP.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
   EXPORTING
     field_ranges = trange
   IMPORTING
     expressions = texpr.
submit FAGL_ACCOUNT_ITEMS_GL with FREE SELECTIONS texpr   AND RETURN .

How to create user editable Crystal Report with dynamic dataset

What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.

The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

Submit report with dynamic selections

Hi All,
I am trying to Submit a report with dynamic selections. I am using the option SUBMIT REPORT WITH FREE SELECTIONS.
But the dynamic selections are not getting passed.
Request you to kindly provide some inputs
My code is
DATA: trange TYPE rsds_trange,
      trange_line LIKE LINE OF trange,
      trange_frange_t_line LIKE LINE OF trange_line-frange_t,
      trange_frange_t_selopt_t_line LIKE LINE OF trange_frange_t_line-selopt_t,
      texpr TYPE rsds_texpr.
trange_line-tablename = 'PA0002'.
*trange_frange_t_line-tablename = 'PA0002'.
trange_frange_t_line-fieldname = 'GBJHR'.
trange_frange_t_selopt_t_line-sign   = 'I'.
trange_frange_t_selopt_t_line-option = 'EQ'.
trange_frange_t_selopt_t_line-low    = '1987'.
trange_frange_t_selopt_t_line-high   = '1987'.
APPEND trange_frange_t_selopt_t_line TO   trange_frange_t_line-selopt_t.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
    field_ranges = trange
IMPORTING
    expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
                WITH SELECTION-TABLE rspar_tab
                WITH FREE SELECTIONS it_texpr
                and returN.
Kindly provide your inputs
Regards
Reshma

Hi Reshma,
Use the FM - RS_REFRESH_FROM_DYNAMICAL_SEL before FREE_SELECTIONS_RANGE_2_EX.
data: trange type rsds_trange,
          g_repid type sy-repid.
g_repid = 'RPCADVQ0'.
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
    exporting
      curr_report        = g_repid
      mode_write_or_move = 'M'
    importing
      p_trange           = trange
    exceptions
      not_found          = 1
      wrong_type         = 2
      others             = 3.
if sy-subrc eq 0.
" Do the changes to the trange
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar_tab
WITH FREE SELECTIONS it_texpr
and returN.
endif.
Cheers,
Kothand

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Dynamic selection screen for custom ABAP report

Hi,
His it possible to create a custom ABAP report with a dynamic selection screen. The report doesnot use a logical database. If possible sample code will be appreciated.
Regards,
Chandra Kumar

hi
use this link
Dynamic selection screen
Cheers
Snehi

Adding Standard Text to the Selection Screen obtained using PARAMETERS

Hi all,
I have a report program which has the selection screen declared by the key word PARAMETERS.
Now I need to make the changes to this program such that a Text Editor appears on the Selection Screen and has a Standard text that should be displayed.
How can I do it?
I saw the screen number of the Selection Screen and went to screen painter and tried to add the Text Editot..but it did not let me dou2026.Why?
How should I add a standard text to a selection screen? The standard text should not be on top , but some where on the screen.
Regards,
Jessica Sam

Hi Sam,
I dont want to create a new screen for this. On the existing screen whihc was built using PARAMETERS key word..i should insert a blokc of text whihc is mpre than 5-6 lines..how should i do it.
I navigated to Text Elements---->Selection Texts
it is now asking for Name and Text and i see in Name column the name of the parametsr that they used for Check box, radio button etc and in Text i see the text that is appearing on the screen
Now i am not sure what is should do next
My req is..i should display a block of standard text that doesnt change and whihc is of 4-6 lines?
how should i do it?
please also help me with what data declartions that i should do in parametrs key word in program?
Regards,
Jessica Sam

Adding a BSEG field to the FB03 dynamic selection screen

Hello,
We have a requirement wherein we want to add a field from BSEG in the dynamic selection screen of FB03.
We found that the logical database behind this is BRF. So we created a u2018CUSu2019 selection view for the logical database and added the field from BSEG to the functional group
and checked the checkbox u201CPreselectu201D for it to appear automatically in the FB03 screen.
But we still couldnu2019t see the field in FB03 dynamic selection.
On analysis, we found that only tables are that are defined in the nodes (Extras  Selection views) can be used to create the dynamic selection and BSEG was not available
as one of the node. So we added BSEG as one of the node by adding the below code to the SELECTION of the logical database.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE BSEG.
Even after that, we couldnu2019t see the field from BSEG in the dynamic selection.
Are we missing anything here?
I see many threads here on similar lines but no one has posted the exact step. Any help is highly appreciated.
Thanks a lot.
Regards,
Suganya

Hi
If you want to take the line item details than you can refer these t-codes rather than customizing.
S_AC0_52000887 - Receivables: Profit Center
S_AC0_52000888 - Payables: Profit Center
S_ALR_87012332 - G/L Account Statements
Here by using the dynamic selection you can get the results. Use object list display and select the layout for more fields.
Thanks

Adding new table dynamic selection screen of transaction FBL5N (LDB DDF).

Hi,
I have a requirement to add SEGMENT (CEPC-SEGMENT) field on the dynamic selection screen of transaction FBL5N (LDB DDF).
Please let me know how can I meet this requirement
Thanks

I did not find any screen exits for this Tcode, may be you need to use enhancement spots.

How to deal with dynamic selection screen elements when macros are used?

Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
                    for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
      position pos_high.
selection-screen: pushbutton (15) text-028
                    user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.

In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Dynamic Selection Screen In Transaction

Hi all,
My first post here, and i got a good problem.
I try to create a specific transaction , At the top: I got a LISTBOX with a pushbutton.
When you select datas into the listbox, i wish to create a dynamic selection screen dependant on the selected data, below the listbox. Does it clear?
And i have no idea how to proceed.
Thanks for answers
Message was edited by:
Gunther OLTRA

Thanks Karthik ,
But it's not helpfull.
The dynamic selection screen must be created from a transparent table.
I draw you a schematic:
I select data in the listbox, with this Key, i will select datas in the transparent table and create the dynamic selection-screen below the listbox.
It's not a report, it's a transaction.
I know how to create dynamic SS, but i don't know how to display it (subscreen? Custom control?)

Exclude one field from Logical Database's dynamic selection screen

Hi Guru,
I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
I have use the below syntax in my zprogram.
selection-screen exclude select-options: doc-no.
However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
Please advice.
Best Regards,
Fung

The selection part of the logical database defines input fields for selecting data.
          The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
          Include called DB<ldbname>SEL.
        SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
                                                                SELECTION-SCREEN EXCLUDE ... .
                                                SELECTION-SCREEN END OF VERSION ver.
Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
          SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

Need to disable one of the select-options in dynamic selection screen

Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
Ravi

Hi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name.

Query on editing standard report ,adding dynamic selection screen

Similar Messages

Maybe you are looking for