Query on graphics display in SCM 5.1

Dear All,
I am using SCM 5.1 and facing some issues while displaying the graphics
1. In interactive planning, when I select the Graphics options, system displays the name of the planning book as graph title. What are the settings, so that it actually displays the selection characteristics on the graph.
2. I also want to display the selection characteristics, on the screen when I execute a statistical forecast.
3. When I select a subset of key figures, from the planning table, the graphic display does not get updated. It still shows all the key figures.
The graphics function has changed significantly in SCM 5.1. Does anybody have a document listing the enhancements in SCm 5.1 for graphics?
regards,
Kedar

Hello there Kedar,
First of all you're very right, there are lots of changes from SCM 5.0 to 5.1 in graphics, but unfortunately I did not find anywhere a guide with changes introduced.
In order to try to solve all your issues I'll strongly recomend you to update SCM until SP7, which introduces quite a lot of corrections in graphic displays.
Then, have a look at this notes, which do solve more issues regarding graphics:
Notes:  1228211, 1279862, 1151482
Main new features, regarding my experience in implementations are these:
- Users can modify default configured graphic in the interactive table through Switch to Design mode.
- You can see key figures in table view but not in graphic and viceversa (correct usage of this function require having a look at notes and sp update)
- Configuration of lines, fonts, sizes and rest of options is a bit more complex but complete.
Hope this helps.
Miguel Garcí

Similar Messages

  • Is it possible to export the graphical display of a Query Result to .xls ?

    Hi Guru's
    Is it possible to export the graphical display of a Query Result to .xls ?
    Please give me some assistance
    Points will be assigned
    Thanks and Regards
    Srikanth

    Hi Srikanth,
    Checked it....I am able to save that as a .XLS in the above mentioned process.
    Try it again.
    Regards,
    Ram.

  • Graphical Display of Marketing Calender

    hi CRM GURUS,
    We are trying to use the Marketing Calender.
    we defined the Queries and we are able to see the Respective Campaigns according to the QUery.
    But we are just able to see the list of the campaigns and we are not able to see the camapigns Graphically.
    The help file states that we will be able to see the campaigns Graphically in the Calender But I am not able to see them.
    Also we are not able to go to the respective campaigns by clicking them and here also the help file states that we should be able to enter in to the respective campaigns and be able to do the changes
    Any help for me

    Hi,
    What do you mean by 'graphical display'? You can either have standard view or ALV. You can switch between the two being in the report and going to Menu - Settings - Switch list.
    Regards,
    Eli

  • RE-FX and graphical display

    Hi,
    I would need to display the architectural view of RE-FX (buildings, properties etc.) in a graphical display tool.
    What are the settings required in RE-FX? Should the geocoordinates (longitude, latitude) be maintained in the RE object master data, and if so is there some enhancement or similar for adding those?
    Thanks a lot!

    Hi, 
    sorry, do you mean this is available in RE or not?
    Would anyone have some examples how the link from RE-FX to GIS systems has been made?
    Should the mapping of the RE objects to the map be done in some external tool like some geodatabase? Is this typically something that is provided by the external map tool e.g ESRI?
    In SAP help is mentioned the architectural view is recommended for this link ,but I can't find any practical information about how this should be done:
    "Use of the architectural view is optional. It is recommended in the following cases:
    .... You want to link to graphical systems."
    If you have any ideas about this it would be really great!

  • Color graphics display, on PSC 2400 part #H100632782 is bad.

    Color graphics display port number H100632782 is bad. This is on HP PSC 2400 photosmart series all–in-one. The display over a period of time just faded away. The chassis number is CA02124640-0001  model 5610.  I have found another part  number  that may work in its place it is 7Rh100680782.  All these suppliers that I checked,no longer have the part available. I am running this printer from a  MacBookPro.  The software is Mac OSX version 10.7.5. All help is greatly appreciated.
    CB
    This question was solved.
    View Solution.

    The HP Partsurfer site lists the display as Q3083-60016.  This is no longer available through HP but you may be able to find a replacement with a Google search.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Extending Expert Query VO but Query doesn't display in standard VO

    I need to add a new attribute to an export query VO (oracle.apps.icx.por.reqmgmt.server.GroupReqsPublicVO), but when I edit the standard VO in JDeveloper the existing query doesn't display (query is blank and no attributes are listed). I can get the query from the xml file, but does this mean there is a problem? Should I just copy the query from the xml file and use that?

    All of the info is in the standard VO xml file (ie query, attributes, etc), but when I choose Edit VO ... in JDev nothing is displayed. A similar standard VO (slightly different query) appears fine in JDev - query and attributes displayed.
    I ended up trying the following, which appears to be working (although I am still waiting on some test data from the users):
    Create new VO, extending standard
    Copied the query from standard VO xml file
    This left me with all of the queried attributes, but none of the transient attributes.
    I tried to copy the additional attributes from the standard VO xml file to the extending VO xml file in JDev, but the extending VO xml file is protected.
    Then I closed JDev, manually edited the extending VO xml file to include the additional transient attributes that are in the standard VO xml file.
    Whether it was related or not, but when rebuilding my project, it complained that it couldn't find the standard VO's Impl java file, so I decompiled the class file to produce that.

  • Graphical display partly covered time to time

    My graphical display sometimes get partially covered with black boxes. It goes away once I close that application and reopen again.

    krispiekream wrote:
    can you take some screen shots and show us?
    Yes that would help!
    Most weird graphic problems in LV can be fixed by turning attention to the graphic interface of your machine. Reducing hardware acceleration settings or getting driver updates for your graphics adapters seem to fix most weird displays.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Graphics Display in Report

    Hi,
    I put a graphics display in a report. I always got 'Floating exception r25desm (core dumped)'. I am using Reports 2.5 and Graphics 2.5 on Unix. What is the problem?
    Lu

    What error did you get? Please give the original error code and message to help us diagnose the problem.
    In order to run OGD, you definitely need Oracle Graphics installed on the same oracle home as reports.
    Thanks,
    -Shaun

  • BEx Query Analyzer Value Display of +/- Sign

    The KeyFigure values in the BEx Analyzer are being displayed as 512.740000000-  with a negative sign in the back. I tried to change the settings in Bex Query Designer -- Query Properties -- Value Display to "Before the Number -123.45" setting. It looks like it doesn't have any effect.
    Please let me know if I need to change the setting from the backend, we are on BI 7.0.
    Venkat

    It should work. Try to refresh the query if not come out of Bex and Relogin. This should fix

  • Solution Directory Graphic Displays as XML

    We are runing Solution Manager 4.0.
    If I perform the following actions...
    - Run transaction SOLUTION_MANAGER.
    - Select "Goto Solution Directory" (pencil icon) for a solution.
    - Expand the solution structure by clicking on the solution name.
    - Select the Systems sub-item or the Servers sub-item.
    Instead of seeing any graphics in the Graphic tab, I see XML tags.  The XML is formatted using Internet Explorer's default appearance.
    Any idea what could be causing this?  I downloaded and installed the latest version of Microsoft XML (MSXML 6.0), but this didn't change anything.

    Hi Steve,
    Can you help us how to change this default name mapping.... we too are in a similar problem...where the graphics display is in XML code.
    The error shows : URL http://blrkecsolman.XXXXXX.com:8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm call was terminated because the corresponding service is not available.
    Thanks for your help.
    Br,
    Sri

  • Unable to get the graphical display of Business process in BPMon

    Hi,
    I am working on solution manager 7.1. I have set up a business process for monitoring in the BPMon session. But i am not getting the graphical display in the business process operations workcenter in the graphical view tab.
    Can anyone tell me how can i get that.
    Regards
    Vishal

    Hi,
    Please run run report RTCCTOOL and see if any addon is not up-to-date.
    Please run this repport and follow the recommendations to update those
    components to the latest status.
    Afterwards please also intall the latest version of following note: 1570282 - Advance Corr. BPMon ST-A/PI 01N
    Finally please deactivate BPMon, regenerate and re-activate agin.
    Also check BPM troubleshooting guide:
    https://websmp102.sap-ag.de/~sapdownload/011000358700001186112010E/
    Troubleshooting_for_BPMon.pdf
    Thanks
    Vikram

  • Auto Query in Before Display Page Section

    The following code is querying master and detail blocks automatically in before display page section. It was working fine. But now I don't know why it doesn't work any more. Does any one know what's the problem?
    declare
    l_fs varchar2(4000);
    l_s varchar2(4000);
    L_user varchar2(4000);
    begin
    l_fs := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK',
    p_attribute_name => '_FORM_STATE');
    l_s := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK',
    p_attribute_name => '_STATUS');
    L_user := portal30.wwctx_api.get_user;
    if l_fs = 'QUERY_AND_SAVE' and l_s is null then
    p_session.set_shadow_value(p_block_name => 'MASTER_BLOCK',
    p_attribute_name => 'A_E_MAIL_ID',
    p_value => L_user,
    p_language => portal30.wwctx_api.get_nls_language
    WWV_MASTER_GENSYS_1(p_block_name => p_block_name,
    p_object_name => p_object_name,
    p_instance => p_instance,
    p_event_type => p_event_type,
    p_user_args => p_user_args,
    p_session => p_session);
    p_session.save_session;
    htp.p('<script>window.location.reload();</script>');
    end if;
    end;

    Hi,
    To query records before displaying and to refresh the page, you can call the same form (by using the code given below)with necessary parameters from ..before displaying page..section of your form.
    declare
    l_fs varchar2(4000);
    l_s varchar2(4000);
    L_user varchar2(4000);
    begin
    l_fs := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK',
    p_attribute_name => '_FORM_STATE');
    l_s := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK',
    p_attribute_name => '_STATUS');
    L_user := 'PPP';
    if l_fs = 'QUERY_AND_SAVE' and l_s is null then
    htp.p('<SCRIPT LANGUAGE="JavaScript">
    window.location.href = "PORTAL30.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=<MODULE ID>&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=E_MAIL_ID&p_arg_values='||l_user||'&p_arg_names=_E_MAIL_ID_COND&p_arg_values=%3D";
    </script>');
    end if;
    end;
    Replace <MODULE ID< with the module id of your master detail form.
    Hope this helps!..
    -Krishnamurthy

  • Hp 6250 printer - Color Graphics Display came off machine

    The graphics display screen pulled right out of the machine. I have opened it up but I can not find where the white cable (more like a flat ribbon) should be located and inserted inside the machine. If anyone can provide me with a picture of the inside of the printer where it should go or detailed insurctions on where it goes I think the machine will still work just fine.

    Hello, 
    Please call HP Tech Support for further assistance. The pritner has to be replaced.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Graphical Display of Standard Reports

    Hi Gurus,
    In standard report like FBL1N, FBL3N etc. Can we get a graphical display of these reports?
    If yes, tell me the steps.
    Thanks

    Hi,
    What do you mean by 'graphical display'? You can either have standard view or ALV. You can switch between the two being in the report and going to Menu - Settings - Switch list.
    Regards,
    Eli

  • Graphics display problems (dialog boxes) Lenovo G50 AMD A6 Win 8.1

    Graphics display problems Lenovo G50 AMD A6 Win 8.1 Greetings to all. After having spent a number of days trying to find a solution to a display problem, I turn to this forum for help. I own a Lenovo G50 AMD A6 Win 8.1 ever since November 2014, and have had display problems ever since the first day, be it while using internet (Firefox or Explorer) or various software (Text editors, etc.). Many dialog boxes, including colour settings and controls (open, close etc.) either have an inappropriate appearance or even do not appear at all! I manage to "click" on the right places using memory: most areas are INVISIBLE! Another example would be that I do not see any backround colour or image on most webpages such as this one).  Some suggestions included checking for graphics updates (but the drivers used were already up-to-date).  I 'd be most obliged for any new suggestions. Thank you very much. George

    Greetings to all, I finally decided to express my utmost discontent with- the Lenovo G50-45 I bought before Christmas 2014,- the summary response with inappropriate links that I received after exposing  my problem- the fact that I tried to dowload the following graphics driver  (Beema) AMD Driver (VGA, HDAudio, SATA) for Windows 8.1 (64-bit)
    exe
    526 MB
    Windows 8.1 (64-bit)
    VGA V14.502.1002.1002-Logo'd_HDAudio v9.0.0.9905_SATA v1.3.1.220;VGA v13.302.1601.1001_HDAudio v9.0.0.9905_SATA v1.3.1.220
    3/19/2015from here(http://support.lenovo.com/fr/fr/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-45-notebook-lenovo/downloads/DS100174), and after REFUSING to accept cookies and some "Lenovo Service Bridge", finally managed to obtain something  HERE(http://www.notebookcheck.net/Lenovo-IdeaPad-G50-45-Notebook-Review-Update.125641.0.html).  I find it quite disrespectful to NOT provide customers with EASY support, as well as avoiding to  answer their requests for further help when some simplistic "assistance" that one can find almost anywhere on the web leads to no further solution. I shall not repeat the problems I have faced till now: vide supra. The problem, however,  is NOT just with browsers.I simply cannot see any dialog box content and colour in MANY software programs, such as OPEN OFFICE; for instance:  PRESENTATION colour dialog boxes show BLANK squares instead of squares filled with different colours. This has occured AVER SINCE DAY ONE! Finally, a new bug has appeared: Windows 8.1 keeps popping up some email program to which I am invited to register - I never created a Windows email account, and certainly don't intend to do so.NOR shall I accept some "Lenovo Service Bridge", however "discreet and inoffensive" it might be. I don't know if there are any legal grounds for customers to complain for all these problems. I DO know, however, that I shall NEVER buy a LENOVO device ever again. The pricing and processor might be competitive => yet,  the support that ensues is, as far as I'm concerned, LAMENTABLE. To make a presentation, I have to switch to a Samsung R20 using XP..... What is the meaning of all this? George    

Maybe you are looking for