Query on Legacy Upload Format for EMIGALL

HI ,
I need to upload around 500000 records for a particular data object(ex. PARTNER) in EMIGALL .
For that i need to prepare a file in the legacy system to upload into the SAP using EMIGALL.
Question
1. What should be the format of file that is to be prepared .
FORMAT1:
LEGACY NUM BU_TYPE NAME_ORG1 NAME_LAST NAME_FIRST TEL_NUMBER
15070005 ..............2................. COUNTY .......... test1.......... abc........ 123456
This is the format of file i have received from the customer . Does it need to be converted into another format for uploading .
If yes ...is there a way by which i can convert this file into desired format to upload or i have to manually convert each record to the desired format.please help
Thanks in advance.I shall appreciate any quick help in this regard.
Regards
Gaurav

Hi Gaurav
Within transaction EMIGALL go to menu item "IS-U migration: User Handbook".
The User Handbook describes the file layout under
General information
Sequential Import Files
After setting-up a migration object a sample file layout can be found via menu item "Utilities: Structure display: Display customer structure" and within the next screen pressing button "Import File Layout".
Yep
Jürgen

Similar Messages

Line Drawing best file format for import in InDesign

i was wondering what is the accepted and recommended file format for files to be imported in InDesign. I was under the impression that AI files should be saved as EPS but I just read an article that says that Adobe's Dov Isaacs said that eps will be shortly obsolete.What should I do. I work on curriculum that contains both photographs and line drawing and we use tiff for the former and eps for the latter. Most of our line drawing is done in AI. Howeverwe have a cartoonist that sends us files in jpg format. What would be the best file format for him and for us as we draw in AI?
Article link: http://www.prepressure.com/library/file-formats/eps
The future of the EPS file format
EPS is rapidly becoming an outdated file format which is being replaced by PDF just like PostScript itself is also being phased out and replaced by PDF. Don’t just take my word on this. Here is what Dov Isaacs from Adobe said in a discussion on a PrintPlanet forum about the future of PostScript: “ …Adobe will continue to support EPS as a legacy graphics format for import of non-color managed, opaque graphical data into Adobe applications (such as InDesign and Illustrator). Although we certain do not recommend that new graphical content be stored in EPS format (except to satisfy the need to import data into page layout programs that aren’t quite PDF-centric — no need to mention names here!), our user base should feel comfortable that there is no need to worry about a need to convert their very sizable libraries of EPS-based graphic assets.”

Yes, I drag the AI file in.
If after it's in place I need to change I can just right click and chose edit original make the changes and save and the illustration in inDesign will reflect the changes.
On the other hand I can make changes to the original and all iterations of the file will automatically update, say if I used the illustration in several documents.
As an example I had completed a set of documents for a new company, i.e., biz cards, brochures, product labeling, stationery, etc. and in their wisdom they decided to make changes in their logo, which, of course, is on everything. I opened the AI file with the logo made the changes saved and all the documents then reflected the changes. The only caveat to do this seamlessly is to make sure that your file logo size is the same as the original or you might have to tweak placement in the other documents
It is this interoperability that to me makes the Creative Suite so much more than the sum of their parts.
Craig

Want to upgrade from snow leopard to lion, need to purchase an external harddrive to b/u my stuff. will formating for snow leopard be ok when uploading to the new system (lion)?

oh sorry, I thought that was where we put the question I am on an extremely tight budget, but since I do shift work, I wanted to use the iCloud funciton to keep my calendars uptodate on my pc/mac mini/and iphone. Wish there were a way to do it for free on my snow and snow leopard OS, but sinc e I cannot, I am wondering about formatting the external harddrive (which I have to purchase). If I format for the snow leopard, will there be a problem re installing the information into the new snow leopard OS machine? Also, I am wondering about the older Mac Pro I have that is the OS before snow leopard (Snow, I believe) will I be able to use this same HD for backing it up to upgrade it (at a later date)?
Thank you for your help.
Deb

so sorry, I mean uploading information from the back up (ex HD) onto the new Snow Lion OS. (and later doing the same with the Mac Pro which is the system before snow leopard.) TY

What's the mdfile format for the fcsvr_client upload command option?

Dear all:
Does anyone know what's the format for the <mdfile> argument on the fcsvr_client upload command?
As I understood, if I want to upload a file to fcsvr's Library device using the CLI, I would write:
sudo ./fcsvr_client upload /dev/4 <file> <mdfile>
where <file> is the path and filename for the file to be uploaded and mdfile is the upload metadata file. I have tried to use the ReadXML file structure and the getmd file structure and I keep receiving the following error message:
KrTrace log /dev/stderr for pid=419 started at BRT 2010/06/13 13:39:41.531111
13:39:41.530813 0xa011d720 WARNING makeNode KsNodeRegistry.C:51 [KsNode] can't find a node called "MdXMLParseNode_FileType"
Bus error

Just one more note to add to the good ones already here: Make sure your source material is as good as it can possibly be. Maybe I'm the weirdo, but in my experience scaling down and compressing video for Web delivery exaggerates rather than hiding shortcomings in the source material. Most of my content is delivered over the Web, but I shoot everything in high-definition with aggressively contrasty lighting and deeply crushed blacks. You might think it wouldn't matter, since it's all getting downscaled and compressed for distribution anyway, but at least to my eyes, material that's shot in high resolution (and yes, at 23.976) with a lot of in-camera contrast compresses better. You end up with fewer subtle areas of mostly-the-same luminance, like in the backgrounds, and that's where Internet compression really falls apart. By keeping everything in sharp contrast, and especially by underlighting your backgrounds and really crushing your blacks, I feel you give the encoder a little advantage and let it produce a better result.
But that might just be me.

Switzerland ESR file format for Bank statement upload

Hi,
I want to how the Switzerland ESR file format for bank statement upload looks like?
Can i get the sample of the file format from anywhere?
I just want to input this file to program RFEBCH00 to convert it into multicash file format.
Please if anybody can help regarding this?
Thanks,

Hi Gordon,
Thank you so much for your welcome and prompt reply. The localization is Chinese. But the client is using HSBC service which only provides swift MT940 format. I believe Dutch is included in the system of 2007A. Unfortunately, our system is 2007B. Is there any chance I can download the bfp file from SAP portal site or other places? Thank you very much again for your help. I am looking forward to hear from you!
Cheers,
Leon

Best format for upload to a website

i would like to know what is the best format for upload to a website, what i got now is an exported quicktime self contained movie from fcp 25 minutes in length.
the footage itself is shot on mini dv and edited on an uncompressed 8 bit sequence, when exported to quicktime it is 28 gb in size so it is kind of a heavy one.
is it possible to upload it in one piece ( apple recommends exporting to mpeg4 yet i got a bad quality out of this using mpeg streamclip.
what would be the best compreessor for this
than you very much

i got a bad quality out of this using mpeg streamclip.
Check the links that Cristina posted, then let us know if your quality improved, using Compressor...it should.
One question for you regarding quality...are you referring to overall quality of the full frame image, or are you displeased with text/graphics.
If this is the case, then I'd wonder if you edited in a DV sequence, then dropped the edited content into an 8bit timeline for exporting at better quality.
This can cause degradation of the image (particularly text/graphics), since you're taking a 720x480 frame and ever-so-slightly vertically scaling the frame up to 720x486.
Let us know what you did...and your results w/Compressor.
K

How can you convert a PDF File into a picture format for uploading?

How can you convert a PDF File into a picture format for uploading?

If you have Acrobat 11, you'd select: File > Save As Other > Image
and select one of the available image formats.

Asset Initial Upload & reporting for uploaded value

Hi SAP Gurus,
I have uploaded the asset data using AS91 and also updated the GL values in OASV.
The initial upload seems to be all correct in this manner since TB is tallying.
However when i view the FA reports for the date of upload i am finding discrepancies in the Accumulated Depreciation values as shown in the report & the values uplaoded in AS91.
Let me explain further, say for eg. the Cost of the asset was Rs. 10,000/- and Accumulated Depreciation as per legacy (as on date of upload) is Rs. 1858/-. However the actual Accumulated Depreciation should have been Rs. 1863 --- the diffference in legacy data was due to runding offs in previous months.
Now when i uploaded the intial data i used the legacy figures i.e. Rs. 10,000 & Rs. 1858 since trial balance had to be tallied.
However when i run reports in FA for the initial upload date, i find that the reports are showing the Acc. Depn (plan values) as Rs. 1863 & not the value that i have uploaded.
What possibly is the reason for this ?
Can anyone tell me any report to view only the uploaded information ?
Points will be awarded for useful answers.
Thanks & Regards
Piyush Kothari

Hi,
There is an error appearing as below:
"Report date 31.08.2007 is invalid for this report.
Reports of this kind can only be run for the last day of the period in which the last depreciation posting run took place (or in a subsequent period) in the relevant fiscal year.
It is not possible to run a report on posted depreciation in a fiscal year in which no depreciation posting run has yet taken place."
My legacy upload date was 31.08.2007.
When i run for 31.12.2007 (last period in the fiscal year for which dep. run has taken place) then the results are ok.
But still i would like to assign some points to you since this would have helped indeed.
Thanks
Piyush Kothari

'Activation error..' message when uploading rules for multiple territories

Hi All,
When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
The create_rule() and save_rule() methods of CL_CRM_FDT class and FM CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
Kindly suggest some ways to unlock or any other alternatives.
Thanks & Regards
Jagathshree

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Legacy data transfer for new depreciation area for already existing assets

Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
Srinivas

HI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas

Date formats for SQL statements used by recordset object

Hi,
Date formatting appears to be quite problematic for Business One. I did a forum search for date issues and I don't think I saw any of them with an "answered" status. I have an issue with formatting a date for the creation of an SQL statement that the DI sends to SQL Server 2005. I need to format a date so that the localization parameters don't matter for either the client machine or SQL Server's machine. We don't have a problem as long as our machines are localized as USA.
I have PL 22 and I have a form - ours - where I use the Today() function to fill a date field. So this is a date that is not entered by the user. The result of this function is consistent with the localization parameters on my machine. We have two other date fields on the form where the user must type in the date.
As a test, I changed my machine to the UK parameters. I then set up the language parameters of Business One for English(United Kingdom). I changed the date format specifications in Business One so that its format is dd/mm/yy. I then brought up the form and the field that is formatted by the above function arrived in the form's field as dd/mm/yy. I then typed in the two other dates in the same format and added the record to the database. The form's table is user-defined.
I dismissed the form then brought it back up loaded with the new record. The date that was entered by the function appeared in USA format (mm/dd/yy). The dates that were typed in appeared in the Business One format (dd/mm/yy). This of course is not consistent.
When I looked at what got into the database, the formats were the opposite. Weird! To make matters really confusing, I run an SQL statement within SQL Server Mgt Studio, and use the WHERE clause to filter on the date that was based on the function. It didnt matter what format I used for the WHERE clause, the record came up. Does anyone have any idea about how I can ensure that I always use the correct date format for SQL statements passed by Business One to SQL Server regardless of where in the world the application is being run?
Thanks,
Mike

Ian,
Here's what I'm concerned about: Im using the date in a WHERE clause.
Assume the date is Aug 3, 2007.
"SELECT * FROM Table WHERE StartDate > 8/3/2007"
OR
"SELECT * FROM Table WHERE StartDate > 3/8/2007"
If the client machine is set up as USA, the today function will provide the date as formatted in the first query. If the database server is setup as lets say the UK, I believe that SQL Server query parser will interpret the date as Mar 8, 2007.
If the client machine is set up as UK, the today function will provide the date as formatted in the second query. If the database server is setup as lets say USA, I believe that SQL Server query parser will also interpret the date as Mar 8, 2007.
In both cases it would be wrong.
I know I could use the DATEPART function to get the three parts and this will make the code indifferent to the localization specs of the client machine. I need to then be able to concatenate those date parts for the WHERE clause so that the localization specifications of the database server dont matter.
Thanks,
Mike

How do I change the default file format for saving files in Preview

I often take screen clips and save them as files to my desktop, then upload them to my website or include them in emails. The default file format for Preview seems to be TIFF, but I'd prefer jpg. How do I convince Preview to use jpg as the default file format?
TIA,
Thad

I should have been a little clearer...
If I'm emailing a screen-clip, I can just paste it right into the email, but I post on a lot of discussion boards and it's often nice to be able to include a screen shot in those. My preferred way to do that is to post the clip at my personal website and then put a link in the post. It gives me the ability to delete the image whenever I want (a plus for any security freak) and it works on every discussion board I know. Some boards allow attachments, some don't. Plus I don't want to have to remember different d/b file attachment procedures. Anyway, when I make a screen-clip, I need to temporarily save it (usually to my desktop), then ftp it to my website. I use Preview to do that. It's simple. But I'd like it to default to .jpg instead of .png or .tiff. (FWIW, I just tried it and the default was .png, but I swear I did something similar earlier that defaulted to .tiff when I first tried to save the newly-created file).

Multiple page format for single smartforms

We have a requirement to get the output in different page formates for a smartform.
How to achieve this???

suppose you r using a program to print the smartform.
Just check this program.
REPORT z_sf_demo1 .
PARAMETERS p_bukrs LIKE ekko-bukrs.
DATA: fm_name TYPE tdsfname.
DATA: ssfctrlop LIKE ssfctrlop.
Function to get the function name to run SMART FORM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZJAYRA_DETAIL'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To pass parameters for CONTROL_PARAMETERS
ssfctrlop-no_open = ' '.
ssfctrlop-no_close = 'X'.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To pass parameters for CONTROL_PARAMETERS
ssfctrlop-no_open = 'X'.
ssfctrlop-no_close = ''.
ssfctrlop-startpage = 'PAGE2'.
Function to run SMART FORM from third page to last page.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ssfctrlop-no_open = 'X'.
ssfctrlop-no_close = ''.
ssfctrlop-startpage = 'PAGE3'.
Function to run SMART FORM from third page to last page.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I have also sent a mail to your gmail id regarding the details of my program.
Hope your query will be solved.
<b>Rewards pioint for helpful answers.</b>
Regards,
Abhay.

Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Query on Legacy Upload Format for EMIGALL

Similar Messages

Maybe you are looking for