Query on loaded the data from ECC to BI
Hello Bw guys,
I kept one responsibility in my resume as Loaded the data from ECC to BI and used intialization with delta update and full update methods.What does it means? Can u please help me out?
Thanks
Amarnath K
Very simple.
This is somewhat like how you updated your resume by transfering from another and did a fake update to your resume.
The difference is ECC does that using a authorized route to update it in BI.
PS:If you have provided the client name you are going to join it will be easy for us to explain to them directly.
~Andrew
Edited by: Andrew J on Dec 18, 2009 3:44 PM
Similar Messages
-
Error in code page mapping for Source system whil loading the data from ECC
HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
JagadeeshHI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh -
BPC:NW - Best practices to load Transaction data from ECC to BW
I have a very basic question for loading GL transaction data into BPC for variety of purposes, would be great if you can point me towards best practices/standard ways of making such interfaces.
1. For Planning
When we are doing the planning for cost center expenses and need to make variance reports against the budgets, what would be the source Infocube/DSO for loading the data from ECC via BW, if the application is -
YTD entry mode:
Periodic entry mode:
What difference it makes to use 0FI_GL_12 data source or using 0FIGL_C10 cube or 0FLGL_O14 or 0FIGL_D40 DSOs.
Based on the data entry mode of planning application, what is the best way to make use of 0balance or debit_credit key figures on the BI side.
2. For consolidation:
Since we need to have trading partner, what are the best practices for loading the actual data from ECC.
What are the typical mappings to be maintained for movement type with flow dimensions.
I have seen multiple threads with different responses but I am looking for the best practices and what scenarios you are using to load such transactions from OLTP system. I will really appreciate if you can provide some functional insight in such scenarios.
Thanks in advance.
-SMFor - planning , please take a look at SAP Extended Financial Planning rapid-deployment solution: G/L Financial Planning module. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is free to licensed customers of SAP BPC. This RDS leverages the 0FIGL_C10 cube mentioned above.
https://service.sap.com/public/rds-epm-planning
For consolidation, please take a look at SAP Financial Close & Disclosure Management rapid-deployment solution. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is also free to licensed customers of SAP BPC.
https://service.sap.com/public/rds-epm-fcdm
Note: You will require an SAP ServiceMarketplace ID (S-ID) to download the underlying SAP RDS content and documentation.
The documentation of RDS will discuss the how/why of best practice integration. You can also contact me direct at [email protected] for consultation.
We are also in the process of rolling out the updated 2015 free training on these two RDS. Please register at this link and you will be sent an invite.
https://www.surveymonkey.com/s/878J92K
If the link is inactive at some point after this post, please contact [email protected] -
I am extracting the data from ECC To bw .but Data Loading taking long tim
Hi All,
i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last 6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
Thanks ,
chanduHi,
There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''. Also give '*' to user name.
Job name: REQ_XXXXXX
User Name: *
Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
Let me know if you still have questions.
Assigning points is the only way of saying thanks in SDN.
Thanks,
Kumar. -
Unable to extract the data from ECC 6.0 to PSA
Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanksECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks -
Unable to load the data from PSA to INFOCUBE
Hi BI Experts, good afternoon.
I am loading 3 years data( Full load ) from R/3 to Infocube.
So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
SID 60,758 is smaller than the compress SID of cube ZIC_C03; no request booking.
Please give me the solution how to solve this problem.
Thanks & Regards
AnjaliHi Teja,
Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
Anjali -
Regarding Loading the data from DSO to cube.
Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
ThanksHi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks -
Load the data from a transparent customised table in BW to an ODS
Hi there,
How can you load the data from a transparent customised table created in BW to an ODS.
Many thanks.
SarahHi,
just create a generic datasource in rso2 for that table, replicate the datasource for source system 'myself', create a infosource and assign the new datasource to that infosource. Create a update rule from infosource to ods, create a infopackage and load the data.
regards
Siggi -
Loading the data from a text file to a table using pl/sql
Hi Experts,
I want to load the data from a text (sample1.txt) file to a table using pl/sql
I have used the below pl/sql code
declare
f utl_file.file_type;
s varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
loop
utl_file.get_line(f,s);
insert into sampletable (a,b,c) values (s,s,s);
c := c + 1;
end loop;
exception
when NO_DATA_FOUND then
utl_file.fclose(f);
dbms_output.put_line('No. of rows inserted : ' || c);
end;
and my sample1.txt file looks like
1
2
3
The data is getting inserted, with below manner
select * from sampletable;
A B C
1 1 1
2 2 2
3 3 3
I want the data to get inserted as
A B C
1 2 3
The text file that I have is having three lines, and each line's first value should go to each column
Please help...
Thanksdeclare
f utl_file.file_type;
s1 varchar2(200);
s2 varchar2(200);
s3 varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
utl_file.get_line(f,s1);
utl_file.get_line(f,s2);
utl_file.get_line(f,s3);
insert into sampletable (a,b,c) values (s1,s2,s3);
c := c + 1;
utl_file.fclose(f);
exception
when NO_DATA_FOUND then
if utl_file.is_open(f) then utl_file.fclose(f); ens if;
dbms_output.put_line('No. of rows inserted : ' || c);
end;SY. -
When Loading the data from a french Language
Hi all
First let me Wish u Happy Friendshipday
When iam loading the data from a french system. Do i need to have a french key board.
And wht measures should i take to load a load when it is not in english language..Hi
You dont need a french keyboard!
Just make sure that the french language is installed in your BW system
TO check this go to transaction RZ10 and select a defined parameter.
In it, see if apart from English and German, if french is also checked. Installation of language is job of basis guys and check with them too
Hope this helps
Prakash
Assigning points is a way of saying thanks on SDN -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
Error while loading the data from text file
Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?
Maybe you are looking for
-
(this post was previously titled: Quick Access: Anoying extra navigation to browse to desktop etc. - User space should be under Quick Access - please relocate or add such an option to move Desktop, Documents etc. to be listed under Quick Accesss) Qu
-
Which virtualization utility should I use on my Macbook?
I'm trying to run Auto Cad and Matlab on my Mac. I just want to install the applications I don't want to have to install the whole Windows system on my machine. Is not clear to me if Parallels or VMWare can do this, they seem to need to have Windows
-
Hi Experts, Iam doing a Idoc to file scenario. Based on the sales organization(VKORG),i need to create the multiple records in the file. For example : E1MARAM 0..Unbounded | |E1MARMM 0..Unbounded | E1MARMM | E1MARMM | E1MARMM | E1MVKEM 0..Unbounded |
-
帖子被trinight在02-19-2006 07:14 AM时编辑过了 Attachments: save data to array.vi 11 KB
-
How to get Javascript plugin?
I cannot load images into a layered stack in Photoshop. The error message says it's because I don't have the Javascript plugin. I have Java installed, but I don't see how to get the plugin.