Query on MCJC - MTTR/MTBR Functional Location report in Plant Maintenance

We have recently upgraded our SAP 4.7 system to mySAP ERP 2005 ecc6.0.
We are facing problem in report derived using tcode'MCJC' in Plant Maintenance.When we execute MCJC (MCJC - MTTR/MTBR Functional Location ) transaction, there is no data appearing in the report output.This report is used to get the functional locationwise data from maintenance order. The transactions are entered for creating maintenance order & notifications through IW31. This is getting updated in table s070.
This is a standard report and was working fine in SAP 4.7.

Hello Mr Subrahmanyam,
                                        When you are saying that the Equipment is in Breakdown, it may happen that the whols FLock could be considered in Break down, but not necessary,
say we take an Example of a Work Shop, where Mechanical Workshop is the Functional Location and it has N no of Equipments like Lath, Grinding m/c, Welding M/c, Shaper Etc.... in this case can you please tell me if only one of the above mentioned Equipment is under Break down can the Whole Mechanical Workshop be termed as under Shut down.
What you are saying is correct in the Line Production, where we can have the Predessing as well as the Succeding Equipments, there for the Critical Equipment you generally have a Back-up Equipment, may be possible the capacity of the Backup might not be same as the mail Equipment, but still it can serve the Purpose for the Time Being. in that condition how can you say that the whole FLock is in Breakdown.
Hope I am able to clarify.
Regards,
Yawar Khan

Similar Messages

  • SAP Standard Reports for Plant Maintenance

    Dear Gurus,
    Am a newbie in SAP trying to do Plant Maintenance.
    Is there a list of standard reports for Plant Maintenance ?
    What T-Code is that ?
    Regards,
    Tootsie

    Hi Thyaga,
    Thanks. The answer is correct, and helpful. I can't see how the answers are awarded yet. Maybe I did not mark it as question when I create it?
    Will try again next time. Happy Dewali to you.
    Regards

  • Equipment with Functional Location Report

    Hi,
    Can you please tell me which report I can see function location for each equipment.
    Thanks
    John.

    Hi,
    Check these tcodes.
    IH01     Functional Location Structure
    IH02     Reference Location Structure
    IH03     Equipment Structure
    IH04     Equipment Structure
    IH05     Material Structure
    IH06     Display Functional Location
    IH07     Display Reference Location
    IH08     Display Equipment
    IH09     Display Material
    IH10     Display Equipment
    IH11     Display Functional Location
    IH12     FunctLocation Structure
    IH18     Ref. Location List (Multi-Level)
    IH20     Where-Used List Time
    IH22     Where-Used List Time Interval
    IL07     Funct. Location List (Multi-Level)
    IE07     Equipment List (Multi-level)
    Thanks & Regards,
    Kiran

  • Damage Analysis report in plant maintenance

    Hi,
    I need to display the damage cause analysis via Transaction code MCI5. But the report does not display the description of the damage code. Could someone help me to fetch a report for the damage analysis with the text description.
    Thanks,

    Please clsoe this duplicate thread.

  • MTTR MTBR Report on Assembly Level

    Dear All
    Standard MCJB report give the MTTR and MTBR report on Equipment Level. we need it on Assembly level. for that we did changes on LIS. we create the new Info Structure by coping S070 and added Assembly.
    with this Assembly is now coming in the report but the Time is not getting Update. Please help me on this..
    Regards
    Ankit..

    Hello
    First You need to create the notification for assemblies then you can see the MTTR & MTBR Time in report.
    Can you explain that ,your creating any Notification for Assemblies if so please check the weather that notification in Completed status
    Regards,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Jul 29, 2010 4:39 PM

  • MCJB MTTR/MTBR

    Dear Sir's,
    Our User want to know the process, How to calculation of MTTR/MTBR in MCJB Report.
    And I am new for PM.
    Please tell me the whole process , step by step how to put the values and what is the master data for this and how to calculate the MTTR/MTBR report.
    Thanks in advance.

    Hi Sharma,
    Thanks for using the BPX!  However you are one the Higher Education & Research BPX. Please try one of the following sites to get the appropiate experts helping you out:
    - Enterprise Asset Management (SAP EAM)
    Or outside the SAP SDN bpx:
    - http://www.sap-basis-abap.com/sappm.htm
    - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/86f7b690-0201-0010-c49c-eade0473022a
    - http://www.itjobswatch.co.uk/contracts/uk/sap%20pm.do
    - http://www.sap-img.com/sap-pm.htm
    - http://www.sap-img.com/plant/questions-answers-on-pm-equipment.htm
    - http://www.sap-img.com/plant/sap-pm-questions-answers-on-functional-locations.htm
    - http://www.sap-img.com/sap-pm.htm
    br,
    Rob

  • Functional location not reflected in connection object

    HI...
    I created a functional location in the plant maintanence module..however when i try to check this from the connection object SAP gives me an error sayin the Location does not belon to IS type C(connection Object).
    during FL creation i had specified the category as A (connection Object) and structure indicator as AO_GP (ISU defaults)...wat am i doing wrong..?

    HI MICK
    I  HOPE I  HAVE FOUND UR ANSWER
    JUST  GOI TO
    SPRO-SAP UTIL-MASTER DATACONNEC OBJECTBASIC SETTINGS-
    HERE IN THIS SCREEN  ENETR THE FOLLWONG  ENTRUIES
    IF U  HAVE ONE DELETE ANDMAKENEW AS HERE
    C     AO_GP   A
    C is connection object
    AO_GP  str
    A is fucnt  location  categ
    make it
    and u  will get ur issues solved
    kr
    raj

  • Table for maintenance plant for equipment & functional location

    Hi,
    I am trying to identify a table that will give me maintenance plant for a particular equipment & functional location.
    Can you help me identify this.
    Regards,
    Vijay

    Hi
    ITOB is Table for Functional Location which will give Maintenance Plant & for Equipment which will give Maintenance Plant
    Regards,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Jul 29, 2010 4:32 PM

  • Cannot change company code for functional location in PM module

    Dear Gurus,
    When I try to change the maint plant for topmost level hierarchy FL, I get error. So I cleared the data in organization tab (planning plant....) and tried to click location tab but receive warning (After changing PM planning plant, please check dependent objects) & cannot proceed. Kindly advice me on how I can change the company code for all the functional location in the plant.
    Thank you.

    Dear Gurus,
    Is there any way I can mass change the company code for all FLs?
    Thank you.

  • Plant maintainence -Functional Location

    Dear PM Experts !
    One generic question.
    When we maintain the Equipment Masters from IE01.
    We Define the Work center, Plant, Location.
    Now in the Functional Masters in the Structure:
    the equipment will be automatically populated.
    Please suggest that whether we have to manually assign the Equipment to the functional Location
    regards,
    SAP

    Hi
    You have to install the equipment into Functional Location manually
    Like
    After creating a equipment -  go to structure tab. Where you wil find install struture - Install the Functional Location there.
    In the equipment create / Change Window
    Go to Structure in the tool bar - Select Change or install Funcational Location
    In Spro
    Plant Maintenance and Customer Service - Master Data in Plant Maintenance and Customer Service - Technical Objects - Equipment - Equipment Usage Period - Define Installation at Functional Location
    Define which equipment category should be accepted to install functional location
    - Pithan
    Edited by: Pithan Pithan on Sep 25, 2008 11:37 AM

  • Query , logical DB or report about plan maintenance and functional location

    Hi,
    I've to do a report about a list of plan maintenance. I've to show the functional location affected by the plans but in the table MPOS the field TPLNR doesn't exist.
    But I have maintenance plans that affects to functional location only. I've not found any useful logical database or report to show this information.
    Could anybody help to me?
    Thanks
    Best Regards

    Dear
    The SAP is provded the option please check once again
    Table MPOS- Field ILOAN 
    First take the ILOAN from ILOA table by object reference is 2 (Field: OWNER) in output.
    Then put the Loc/acct assignment value at input of the MPOS table which is u received from ILOA table

  • MTTR/MTBR Report in PM

    Dear Guru's,
       My client has a query that why SAP not Provides MTTR/MTBR report for functional location when an equipment is breakdown corresponding functional location is also breakdown but the system consider only the equipment, not consider the functional location that is linked to the equipment.
    Regards,

    Hello Mr Subrahmanyam,
                                            When you are saying that the Equipment is in Breakdown, it may happen that the whols FLock could be considered in Break down, but not necessary,
    say we take an Example of a Work Shop, where Mechanical Workshop is the Functional Location and it has N no of Equipments like Lath, Grinding m/c, Welding M/c, Shaper Etc.... in this case can you please tell me if only one of the above mentioned Equipment is under Break down can the Whole Mechanical Workshop be termed as under Shut down.
    What you are saying is correct in the Line Production, where we can have the Predessing as well as the Succeding Equipments, there for the Critical Equipment you generally have a Back-up Equipment, may be possible the capacity of the Backup might not be same as the mail Equipment, but still it can serve the Purpose for the Time Being. in that condition how can you say that the whole FLock is in Breakdown.
    Hope I am able to clarify.
    Regards,
    Yawar Khan

  • Functional location for the respective material and equipment in a report

    i want to show the functional location for the respective material and equipment in a report designed for plant maintenace module..how should i add a field in the report which already contains the order , material and equipment no ?..just have to add a field  functional location in that report. Can anyone plzz tellme from which table should i fetch the data .?

    From EQUI get the recent/valid EQUZ record.
    From EQUZ get the ILOA record.
    ILOA holds the TPLNR for the equipment.
    And from ILOA you can get IFLOT.
    edit: just noticed you can use V_EQUI as well.
    Edited by: Maen Anachronos on Nov 26, 2010 12:40 PM

  • MTTR/MTBR Report edit.

    Dear SAP PM experts,
    In My case ,My MCJB Report is running correctly .But one notification type is not a breakdown. I want to generate the report without a one notification type.How to edit the report without  one notification type.
    Thanks,
    Jana

    Hello Mr Subrahmanyam,
                                            When you are saying that the Equipment is in Breakdown, it may happen that the whols FLock could be considered in Break down, but not necessary,
    say we take an Example of a Work Shop, where Mechanical Workshop is the Functional Location and it has N no of Equipments like Lath, Grinding m/c, Welding M/c, Shaper Etc.... in this case can you please tell me if only one of the above mentioned Equipment is under Break down can the Whole Mechanical Workshop be termed as under Shut down.
    What you are saying is correct in the Line Production, where we can have the Predessing as well as the Succeding Equipments, there for the Critical Equipment you generally have a Back-up Equipment, may be possible the capacity of the Backup might not be same as the mail Equipment, but still it can serve the Purpose for the Time Being. in that condition how can you say that the whole FLock is in Breakdown.
    Hope I am able to clarify.
    Regards,
    Yawar Khan

  • MTTR/MTBR report......

    Dear All,
    As per my knowledge we have mttr/mtbr reports straightway available in system, but they calculate from the start date till current time..............accumulative.
    But if i want some month wise comparison, or monthly MTTR/MTBR reports,,,,,,,,and others like COST Comparison,,,do we have available in SAP??
    PLz guide
    rgrd
    DM

    Dear
    For SAP std Report u have the look at MCI1 to MCI 8. If you need any specific dates not from Period wise , Better u can create ABAP report.
    The Breakdwon, Costing (MaterialactivityServices), Planner Grps, Actions (agst Brk down) in one report.
    Make mandatoty fields for Planr Grp, Wrk center, Cause, Damage at Notification , order.
    U can go for own according to the client requiremnet. I think u got some points from all submited earlier post also.
    If any ?
    Thenna

Maybe you are looking for

  • Poll: Development in ABAP Objects / Webdynpro vs. classical Dynpro

    Hey there ABAP developers, I just want to ask if you can give me one or two minutes of your attention for two poll questions. At the moment I´m writing my master thesis about the development of a monitoring tool in ABAP. One of my bigger chapters is

  • I updated to 5.0 and now Firefox crashes when I click browser bar, Signature: nsAutoCompleteController::HandleText(), how can I fix?

    I am running Vista. I upgraded to Firefox 5.0 when prompted yesterday. Since then, whenever I try to click on the browser bar, Firefox crashes. I can use Firefox using the Google search bar and clicking on links, but as soon as I try to enter a URL i

  • Cost of Poor Quality

    Dear All, My client wants the cost of customer return should be booked as Cost of Poor Quality. as after analysing the returned goods, the defective parts will be scrapped with reference to cost center this cost will be booked as cost of poor quality

  • Error when installing apps: Cannot connect to iTunes store

    I have a 3G and i've been able to download and install apps through the app store via iPhone. Recently, the iTunes store on my computer gives the error "We could not complete your iTunes store request. An Unknown error occured (5002)" anytime i searc

  • Macbook keyboard not working in X11

    I just installed arch on my macbook 2,1 and I got X11 to detect my screen, but the keyboard doesn't work. i.e. absolutly NO input. The only thing to do is to emergency shutdown. I haven't really done anything to my xorg.conf except set the keyboard m