Query on MDX used in EVEXP

Hi All,
I am using MDX for filtering values in EXEXP formula. In EVEXP formula's last field of Filter, I am giving the following MDX:
-->  ENTITY .currentmember.properties("Dropdown") ="Y"
I am getting the filtered values of Dropdown property having values Y. But I want to have members having property value of Y as well as N. What MDX sshould I write for the same?

Hi,
You can use
ENTITY.currentmember.properties("Dropdown") ="Y" and ENTITY.currentmember.properties("Dropdown") ="N"
Hope this helps.

Similar Messages

  • SAP BW BEx query - WEBi MDX query

    Hi Experts, have we had some discussion on this?
    Does MDX query send by WEBi report to BW use the same program to extract data from BW database?
    One of the option for WEBi report source of data is to build Universe on top of BEx query. Could you share how this process actually happen.
    I think
    - WEBi query will pass parameters that is relevant for BEx query filter of the universe
    - the BEx query will then extract the data (following normal process if we run BEx query independently)
    - if WEBi has further filtering, it will then get the BEx result above and filter it further ..??
    So, how is MDX query come into the picture?
    Or is it:
    - WEBi query and the BEx query will determine what MDX query will be generated, and this MDX query will then fetch the data.
    But why BEx query extract data faster then MDX query?
    Sorry, i am new to this. hope someone could share some light here. In the meantime i continue to real those documentation and try to get some more ideas of what is actually happening.
    Thanks.

    Hi Thanks a lot for pointing this out.
    Did i understand it correctly that BEx query is using a different set of program (platform) to retrieve data compare to MDX query, and not MDX uses those program that is used by BEx to retrieve data from BW database and have extra steps on top of that?
    Can anyone share what is actually happen WEBi MDX query is executed (how the database is hit with SQL, and what are the tools to evaluate the efficiency of the WEBi (or the used BEx). As for BEx we have RSRT to analyze it right.
    And even to test the MDX query using MDXTEST and try to get the data from WEBi report, i found WEBi report still take considerably a lot longer. Why is this so? just because BO is a different system then BW?
    And as it's shared the BO 4.0 is using the same platform as BEx to retrieve data from BW database, does this mean we don't need to care about MDX usage in BW anymore as far as BO data extraction concern?
    Thank you very much.

  • What query should I use to find all versions of Office 2013 64-bit installed on client computers?

    What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
    appreciate it!

    Hi,
    You could edit the following query to meet your requirement.
    SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                          dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                          CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
    THEN 'SP3' WHEN
                           arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
    THEN 'SP1' ELSE '' END
                           AS 'Service Pack', arp.Version0
    FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                          dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                          dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                          dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
    WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                          arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                          arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                          (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
    AND
                          (arp.InstallDate0 NOT LIKE 'NULL')
    ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
    Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

    Hi,
    I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
    http://server/pages/Default.aspx?Title=Arup&Title=Ratan
    But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
    I have followed the
    http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
    Please suggest me.
    Thanks | Arup
    THanks! Arup R(MCTS)
    SucCeSS DoEs NOT MatTer.

    Hi DH, sorry for not being clear.
    It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
    (or a Performance Point Dashboard etc.) and you insert it into your page and add
    a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
    with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

  • Can we use Result from another query in Webi using Bex uery universe?

    Hi,
    Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
    I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
    I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
    I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
    Has anyone run into the same issue and if this is possible and what should be the solution?
    Thanks in advance!
    Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

    In that situation:
    Create two queries : Oracle and BW query.
    @ Report:
    As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
    Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
    In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
    Hope it helps you.
    Thank You!!

  • Issue While executing the Query for Pagination using ROWNUM with like

    Issue While executing the Query for Pagination using ROWNUM with like.
    Database is Oracle11G.
    Oracle Database Table contains 8-9 lakh records
    1) SQL equal (=)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE = 'KMF22600920'
    Execution Time:- 0.00869245 seconds
    Returns 2 resultsets
    2) SQL like (one %)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE = 'KMF22600920%'
    Execution Time:- 0.01094301 seconds
    Returns 2 resultsets
    3) SQL like (two%)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE like '%KMF22600920%'
    Execution Time:- 6.43989658 seconds
    Returns 2 resultsets
    In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
    4) SELECT * FROM (
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
    Execution Time:- Infinite
    ResultSets:- No as execution time is infinite
    a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
    b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
    Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
    Could you please let us know what is the issue with two % used in like and rownum
    5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
    SELECT * FROM (
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
    Execution Time:- 7.41368914 seconds
    Returns 2 resultsets
    Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?

    This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.

  • In Query of Query, can't use LEFT() function?

    Hi All,
    I've got an LDAP query that I use for our employee directory. I then do a Query of Queries and do LEFT(SN,1) to separate out by first character of last name [A,B,C,D,E...] etc.
    I had this working just fine in Railo CFM, but now I'm using Adobe CF and can't get that to work. I'm on CF9 Standard.
    I've read the Query of Queries guide, but didn't find anything helpful there. Even when I do
    '#LEFT(SN,1)#' as FirstCharacterOfLastName in my query, what I get is the value for the last row, not the value of each row as it's looping through the recordset.
    Am I missing something? Any way to get that to work? Is that addressed in CF10?
    thx.Ben

    You need to understand two things:
    1) any CFML in your SQL string within a <cfquery> tag pair is processed by CF before the SQL string is passed to the DB driver.  So your #left()# expression won't be processed "per row", because it's processed before the DB engine does any "per row" operations.
    2) QoQ's SQL support is tragically minimalist.  This lists all the functions it supports:
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec0e4fd -7ff0.html#WSc3ff6d0ea77859461172e0811cbec0e4fd-7fcc
    With the addition of two string functions: UPPER() and LOWER().  Oh, and CAST() (if that can be seen as a function).
    That's it.  That page in the docs describes all the functionality QoQ has.  There's nothing missing 9as far as I know).  That's it.  There's not much to it.
    I've been lobbying Adobe for a number of years to pull finger and improve QoQ to the point that it's more than just a curio, but they don't seem interested.
    As to why your code works on Railo?  Railo does some weird things, and doesn't stick to the precedent Adobe dictates their language should follow.  Depending on who you talk to, this is either a feature or a barrier to entry (I'm mostly ambivalent, but err towards the latter camp).  But perhaps Railo's QoQ processor supports LEFT().
    Basically... you're gonna have to approach this differently: loop over the query with <cfloop> (etc) and update it row by row.  This is pretty much what QoQ is doing anyhow, so I don't think you'll see a performance degradation.  Well: you won't... because you can't do what you want to do with QoQ at all, I guess ;-)
    Adam

  • Please suggest a select query / sub query with out using any subprograms or

    source table: Three columns ORIGIN, DESTINATION,MILES
    Origin      Destination Miles
    Sydney      Melbourne      1000
    Perth      Adelaide      3000
    Canberra      Melbounre      700
    Melbourne      Sydney           1000
    Brisbane      Sydney           1000
    Perth      Darwin           4000
    Sydney      Brisbane      1000
    out put :Three columns ORIGIN, DESTINATION,MILES
    Duplicate routes are to be ignored so the output is
    Origin      Destination      Miles
    Sydney      Melbourne      1000
    Perth      Adelaide      3000
    Canberra      Melbounre      700
    Brisbane      Sydney           1000
    Perth      Darwin           4000
    Please suggest a select query / sub query with out using any subprograms or functions/pkgs to get the out put table.

    Hi,
    user9368047 wrote:
    ... Please suggest a select query / sub query with out using any subprograms or functions/pkgs to get the out put table.Why? If the most efficient way to get the results you want involves using a function, why wouldn't you use it?
    Here's one way, without any functions:
    SELECT     a.*
    FROM           source_table  a
    LEFT OUTER JOIN      source_table  b  ON   a.origin          = b.destination
                                          AND  a.destination       = b.origin
                          AND  a.miles          = b.miles
    WHERE   b.origin  > a.origin    -- Not b.origin > b.origin
    OR     b.origin  IS NULL
    ;If you'd care to post CREATE TABLE and INSERT statements for your sample data, then I could test this.
    Edited by: Frank Kulash on Nov 6, 2012 7:39 PM
    Corrected WHERE clause after MLVrown (below)

  • Query a table using Multi Select Item

    Hi everyone!
    I got a page where I have this multiselect item, and I want to query a table using its values.
    For example: The Multiselect item has this values: 1,2,3,4,5,6,7,8,9 and 10
    And I want to query every person who has ID_CLASS 1,4,7 and 9 by selecting those IDs from the list, and when I click que Consult button the Report displays those persons.
    Whowever I can't accomplish this, I was trying to find a post about this without success.
    Can anybody help me with this?
    Thanks!!

    Hi,
    This is my problem, I select 2 or more options in the multiple select item, then after I click the "Consult" buttom it submits the page, however only 1 option is highlighted. For example I choose the first two options, then I click Consult and the page is submitted. After that only one of the 2 options are selected, but I need to get the 2 options highlighted as selected items.
    If I clear cache I think I'll lost everything. (selected items)
    Thanks again!

  • Restrict Query Resultset  which uses Analytic Function

    Gents,
    Problem Definition: Using Analytic Function, get Total sales for the Product P1
    and Customer C1 [Total sales for the customer itself] in one line.
    I want to restrict the ResultSet of the query to Product P1,
    please look at the data below, queries and problems..
    Data
    Customer Product Qtr Sales
    C1 P1 19991 100.00
    C1 P1 19992 125.00
    C1 P1 19993 175.00
    C1 P1 19994 300.00
    C1 P2 19991 100.00
    C1 P2 19992 125.00
    C1 P2 19993 175.00
    C1 P2 19994 300.00
    C2 P1 19991 100.00
    C2 P1 19992 125.00
    C2 P1 19993 175.00
    C2 P1 19994 300.00
    Problem, I want to display....
    Customer Product ProdSales CustSales
    C1 P1 700 1400
    But Without using outer query, i.e. please look below for the query that
    returns this reult with two select, I want this result in one query only..
    Select * From ----*** want to avoid this... ***----
    (Select Customer,Product,
    Sum(Sales) ProdSales,
    Sum(Sum(Sales)) Over(Partition By Customer) CustSales
    From t1
    Where customer='C1')
    Where
    Product='P1' ;
    Also, I want to avoid Hard coding of P1 in the select clause....
    I mean, I can do it in one shot/select, but look at the query below, it uses
    P1 in the select clause, which is No No!! P1 is allowed only in Where or Having ..
    Select Customer,Decode(Product, 'P1','P1','P1') Product,
    Decode(Product,'P1',Sales,0) ProdSales,
    Sum(Sum(Sales)) Over (Partition By Customer ) CustSales
    From t1
    Where customer='C1' ;
    This will get me what I want, but as I said earlier, I want to avoid using P1 in the
    Select clause..
    Goal is to Avoid using
    1-> Two Select/Outer Query/In Line Views
    2-> Product 'P1' in the Select clause...
    Thanks
    -Dhaval Rasania

    I don't understand goal number 1 of not using an inline view.
    What is the harm?

  • What query can we use ...for over 30 days

    select PROPERTY,RELAVANTDATE ,
    sum(NOTICES) over (
    partition by property
    order by RELAVANTDATE
    range between interval '30' day preceding and current row
    ) "SUM"
    from Test_Data
    what query can we use ...for over 30 days
    can i use following or preceding

    SCOTT@soti_9> WITH Test_Data AS (
      2    select 10100 as property, to_date('25-JAN-07') as RelavantDate, 20 as notices from dual union all
      3    select 10100 as property, to_date('25-DEC-07') as RelavantDate, 5 as notices from dual union all
      4    select 10100 as property, to_date('02-JAN-08') as RelavantDate, 10 as notices from dual union all
      5    select 10100 as property, to_date('01-DEC-08') as RelavantDate, 10 as notices from dual union all
      6    select 10100 as property, to_date('02-DEC-08') as RelavantDate, 20 as notices from dual union all
      7    select 10100 as property, to_date('31-DEC-08') as RelavantDate, 20 as notices from dual union all
      8    select 10100 as property, to_date('03-JAN-09') as RelavantDate, 30 as notices from dual union all
      9    select 10100 as property, to_date('25-JAN-09') as RelavantDate, 20 as notices from dual
    10  )
    11  select PROPERTY,RELAVANTDATE ,
    12    sum(NOTICES) over (
    13      partition by property
    14      order by RELAVANTDATE
    15      range between current row and interval '30' day following
    16    ) "SUM"
    17  from Test_Data
    18  ;
      PROPERTY RELAVANTD        SUM
         10100 25-jan-07         20
         10100 25-dec-07         15
         10100 02-jan-08         10
         10100 01-dec-08         50
         10100 02-dec-08         40
         10100 31-dec-08         70
         10100 03-jan-09         50
         10100 25-jan-09         20
    8 rows selected.Regards,
    Dima

  • Concatenate results SQL query and CASE use Report Builder Reporting Services

    I need to concatenate the results from a SQL query that is using CASE.  The query is listed below.  I do not need permitsubtype but I need to concatenate the results from the permittype. 
    I tried deleting the permitsubtype query and it would not run correctly.  Please see the query and diagram below.  Any help is appreciated.
    select  PERMIT_NO
    ,(case when
      ISNULL(PERMITTYPE,'') = ''
      then 'Unassigned'
      else (select LTRIM(RTRIM(PERMITTYPE)))
      END) AS PERMITTYPE
    ,(case when
      ISNULL(PERMITSUBTYPE,'') = ''
      then 'Unassigned'
      else (select LTRIM(RTRIM(PERMITSUBTYPE)))
      END) AS PERMITSUBTYPE
     ,ISSUED
     ,APPLIED
     ,STATUS 
     ,SITE_ADDR 
     ,SITE_APN
     ,SITE_SUBDIVISION
     ,OWNER_NAME
     ,CONTRACTOR_NAME
     ,ISNULL(JOBVALUE,0) AS JOBVALUE
     ,FEES_CHARGED
     ,FEES_PAID
    ,BLDG_SF
    from Permit_Main
    where ISSUED between @FromDate and @ToDate

    Hi KittyCat101,
    As per my understanding, you used case when statement in the query, you do not need to display permitsubtype in the report, but when you tried to delete permitsubtype from the query, it could not run correctly. In order to improve the efficiency of troubleshooting,
    I need to ask several questions:
    “I tried deleting the permitsubtype query and it would not run correctly.” As we can see, it has no effect to delete permitsubtype from the query you provided, could you please provide complete sql query for the report?
    Could you please provide detailed information about the report? I would be appreciated it if you could provide sample data and screenshot of the report.
    Please provide some more detailed information of your requirements.
    This may be a lot of information to ask for at one time. However, by collecting this information now, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • Query: how to use structure and selection and what's the difference between

    Query: how to use structure and selection and what's the difference between these two?
    Would be appreciated if some experts here give examples to demenstrate on how to use structure and selection in query and what's the difference between these two?
    Thanks in advance!

    Hi Kevin,
    1. Well by default all the KF that you include in your query go into a Key Figure Structure. You can additionally have another structure for defining how your chars are laid out. A common example is a Calmonth structure where you have selections for 12 months, quarers and YTD values. This would be a char structure with different selections (for each month, qtr etc)
    2. Yes, a selection with a KF is the same as restricting a KF. You can use am RKF is you have one on the left hand side, or if you need to do this locally in the query, right click the structure and choose New Selection, then proceed to choose your KF and reqd char values.
    Hope this helps...

  • Where to check when the query was last used.

    Hi all,
    Where can we check the information when a particuler query was last used. (date ). Any table.
    Also how can we check the same from satistics queries.

    Hi..
    run a query and you will immediately see a new record in table RSDDSTAT (SE16) with your user-ID.
    Also check the Query statistics in Tcode ST03N.
    Cheers.

  • Transport Query generated program using SQ01

    Dear All,
    Please let me know how to transport a query generated program using SQ01. I have created a program from SQ01 query creation and assign a tcode to this program. When the program was generated there was no request create so how to make a request to transport this generated program to PRD.
    Thanks in advance.

    Hi,
    for query transport (export/import or download/upload (which I prefer because it can be done between different SAP systems where no transport mechanism exists)) go to SQ02 and tick the button that looks like a car.
    The t-code assignment (and maybe the the T-code is added in an area menu using SE43) needs to be transported seperately (if you use downlaod/upload as this does not create a transport request.
    best regards, Christian

Maybe you are looking for