Query on Time Scheduling ............................Urgent pls help

Dear Friends
Here is my query on Background processing,
I want to run a program in background which ll save the details in AL11.
I want to schedule this object between 12 AM night to 2 AM night as per the indian time standard.
The data should be save the data in al11 as the following format=>
1-It ll show the PO details that has been created between 12-1 and 1-2,it should not show 12-1 data in 1-2 means between 12 to 2 i ll store the data in AL11 that has been created between these one hour time if it would more than one hour than last one hour data it wont show in al11.
Now the Pos that has been created between 2 am to next day night should be display when the user ll run the report at next day 12 o'clock.
Can you give me the following idea,
1-Which table stores the background scheduling time,if NAST than what is the field name.
If anyone solve this kind of prob,pls help me on this.
Thanks a lot
mrutyun^

Hi,
Try table<b> TBTCS</b> which stores Background Processing: Time Schedule.
Regards,
Amit

Similar Messages

Delete duplicate entriess from the internal table its urgent pls help.

Hi friends,
Hope everybody is doing good,Here is m query on delete duplicate data from the intenal table.
I have an internal table which contain data in the following format.
Doc No Comp Cod Vendor Assignment
1500000009 JM11 00000000
1500000008 JM11 20070212(Repeating)
1500000007 JM11 20070212
1500000006 JM11 00000000
1500000005 JM11 00000000
1500000004 JM11 00000000(Repeating)
1500000003 JM11 00000000 (Repeating)
1500000002 JM11 00000000
1500000001 JM11 20050302
1500000000 JM11 00000000
1500000003 JM11 10000088
1500000001 JM11 10000088
1500000030 JM11 10006260
1500000010 JM11 10006269
1500000008 JM11 10006269
1500000006 JM11 10006269
1500000004 JM11 10006269
if you see the document numbers,there are some document number which are repeating here,there are some document numer which contain vendor number but not the assignments,some of the document numbers contain the assignments but not the vendors.
If my internal table contain this kind of data with repeted document numbers than i want the document number which contains only the vendor number.
Pls help me with the appropriate logic,its urgent.
Thanks a lot
mrutyun^

Hi,
<u><b>Deleting Adjacent Duplicate Entries</b></u>
To delete adjacent duplicate entries use the following statement:
DELETE ADJACENT DUPLICATE ENTRIES FROM <itab>
[COMPARING <f1> <f2> ...
|ALL FIELDS].
The system deletes all adjacent duplicate entries from the internal table <itab>. Entries are
duplicate if they fulfill one of the following compare criteria:
Without the COMPARING addition, the contents of the key fields of the table must be
identical in both lines.
If you use the addition COMPARING <f1> <f2> ... the contents of the specified fields <f1>
<f2> ... must be identical in both lines. You can also specify a field <fi> dynamically as
the contents of a field <ni> in the form (<ni>). If <ni> is empty when the statement is
executed, it is ignored. You can restrict the search to partial fields by
specifying offset and length.
If you use the addition COMPARING ALL FIELDS the contents of all fields of both lines
must be identical.
You can use this statement to delete all duplicate entries from an internal table if the table is
sorted by the specified compare criterion.
If at least one line is deleted, the system sets SY-SUBRC to 0, otherwise to 4.
Examples
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE HASHED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
LINE-COL1 = 1.
DELETE TABLE ITAB: FROM LINE,
WITH TABLE KEY COL1 = 3.
LOOP AT ITAB INTO LINE.
WRITE: / LINE-COL1, LINE-COL2.
ENDLOOP.
The output is:
2 4
4 16
The program fills a hashed table with a list of square numbers. The DELETE
statement delete the lines from the table where the key field COL1 has the contents 1 or 3.
Regards,
Bhaskar

Very Urgent Pls help : Change of payload type to user-defined types

Hello Experts
I was using sys.xml_type as payload type in my queue table creation.
consider xml message
<order>
<id>1</id>
<load rerer="mq" erere='gg" > </load>
</order>
This i inserted into queue table using enqueue process.
this is done.
BUT NOW My manager wants to change the payload type.
he created a type
create or replace type systype as object (msg varchar2(4000));
Now payload type of queue table is changed to
PayloadType==>aq.systype.
Pls help me how can i insert xml messages into this queue table.
This is very urgent. Pls help me
S

I've just read this thread three times and I have absolutely no idea what you are doing, in what version, and what you are asking for help with.
Do you want to change the message type? If you do you MUST drop the queue and start over again from the beginning.
Do you want to enqueue messages?
Post your DDL and other relevant information or you are on your own. We can not guess at your issue.

QUERY CLARIFICATION RQD : gurus, experts pls help

Hai,
I am facing problem in performance of the query. sample scenario i have created here pls help me to solve
**VEH_MAIN* TABLE (MASTER TABLE)*
CREATE TABLE VEH_MAIN
   (     VIP_MOT_IND VARCHAR2(10 BYTE),
     VIP_IND NUMBER(10,0)
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',1);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT02',5);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('M0T03',1);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',2);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT02',6);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',3);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',4);
**VEH_ENGINE_SUB* (table for engine subclass)*
CREATE TABLE VEH_ENG_SUB
   (     ENG_SUBCLASS VARCHAR2(50 BYTE),
     ENG_MOT_IND VARCHAR2(10 BYTE)
Insert into VEH_ENG_SUB (ENG_SUBCLASS,ENG_MOT_IND) values ('ENGSUB001','MOT01');
Insert into VEH_ENG_SUB (ENG_SUBCLASS,ENG_MOT_IND) values ('ENGSUB001','MOT02');
*VEH_ENG_IND( Detail table for engine subclass)*
CREATE TABLE VEH_ENG_IND
   (     "ENG_SUBCLASS" VARCHAR2(50 BYTE),
     "ENG_IND" VARCHAR2(10 BYTE)
Insert into VEH_ENG_IND (ENG_SUBCLASS,ENG_IND) values ('ENGSUB001','1');
Insert into VEH_ENG_IND (ENG_SUBCLASS,ENG_IND) values ('ENGSUB001','2');
*VEH_AXIS( Master table for Engine Axis)*
CREATE TABLE VEH_AXIS
   (     ENG_AXIS VARCHAR2(50 BYTE),
     AXIS_MOT_IND VARCHAR2(10 BYTE)
Insert into VEH_AXIS (ENG_AXIS,AXIS_MOT_IND) values ('ENGAXIS001','MOT01');
Insert into VEH_AXIS (ENG_AXIS,AXIS_MOT_IND) values ('ENGAXIS002','MOT02');
*VEH_AXIS_IND( Details table for engine axis)*
CREATE TABLE VEH_AXIS_IND
   (     ENG_AXIS VARCHAR2(50 BYTE),
     ENG_IND VARCHAR2(10 BYTE)
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','1');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','2');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','3');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','4');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS002','5');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS002','6');
Condition 1
if i select only ENGINE_SUBCLASS='ENGSUB001' then
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )output is
MOT01     1
MOT01     2
Condition 2:if i select only the Engine Axis='ENGAXIS002' then the
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_axis vaxis,
veh_axis_ind vaind
WHERE v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002';MOT02     5
MOT02     6
Condition 3:
BOTH ENGINE AXIS AND ENGINE SUBCLASS
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind,
veh_axis vaxis,
veh_axis_ind vaind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )
AND ( v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002');Null values returned. this is correct.
But the query PERFORMANCE fails in OR CONDITON as below
Condition 4;
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind,
veh_axis vaxis,
veh_axis_ind vaind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )
OR ( v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002');output
MOT02     5
MOT02     5
MOT02     5
MOT02     5
MOT02     6
MOT02     6
MOT02     6
MOT02     6
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
This is sample example. when i implement in huge table with partition this scennario takes much time even 2 hours to run.
i want the output must be as below if i use OR condition like condition 4
MOT01     1
MOT01     2
MOT02     5
MOT02     6
Gurus and experts pls help me to solve this problem. Dont give any suggestion like
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_axis vaxis,
veh_axis_ind vaind
WHERE v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002'
union
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )
}this will give correct result...
MOT01     1
MOT01     2
MOT02     5
MOT02     6
but the problem is we cannot implement this in query. because query get framed at runtime there will be so many implement has to be done. other than UNION pls give me more suggesion
waiting..
S
Edited by: A Beginner on Sep 11, 2010 12:51 AM

create a view v1 with all the joins
select * from v1 where eng_subclass='ENGSUB001'
union
select * from v1 where eng_axis='ENGAXIS002'
If you really do not like the direct access with union, try this
select * from v1
where vsub_PK in (select vsub_PK from v1 where eng_subclass='ENGSUB001' )
OR vsub_PK in (select vsub_PK from v1 where eng_axis='ENGAXIS002')
--vsub_PK is the primary key of table vsub

How can i detect if my PC is not on Network..... Urgent Pls Help Soon !!!!!

Hello Everyone,
We all know whenever we try to connect to a PC which is not on network, we get UnKnownHostException etc..... by which we can detect that the corresponding PC is not an network(intranet/internet)
But when i send a msg from my PC to my PC, it works fine even if the network is down. I hv provided my PC's IP address instead of using localhost or 127.0.0.1 which reduces the possibility that the msg will not be traversed thru the network.
Any IDEA how this works.
Is There any possible way by which i can detect that my PC is not on network or the PC to which i'm trying to connect is not on network .......
Pls help me out, its really urgent as to be implemented in my Project
Thanks In Advance
Sahil Shaikh

Hello Surtee
I have developed a Messeging Service for the eCRM Apllication my company is developing and we r in the final stage of debugging.
Now whenever a user sends a msg to a PC which is not on network, the messaging service automatically sends an Offline mssg to that PC. But know i want ot distinguish wheather the PC to which i'm sending the msg is not on network or am I not on network based on this i need to perform diff. actions, hence i wanted to know that how can i detect .......
Pls see if u canhelp me out ......
Thanks
Sahil Shaikh

Replenishment lead time & Scheduling Agreements - Please help

Hi,
I have a few questions & issues in regards to Replenishment lead time & Scheduling Agreements.
1.     Where are stock requirements & Replenishment lead times configured?
2.     What is a stock/requirements list?
3.     What is Replenishment lead time in MD02/MD04?
4.     Why do negative supply values appear under replenishment lead time in MD02/MD04?
5.     What are the differences between MD02 & MD04?
6.     How do you get to the following screen, since I canu2019t get here from MD02 or MD04 (missing buttons and Replenishment lead time information):
http://i34.tinypic.com/9hl9hz.jpg
Please help. This is very important.
Thanks,
Laura

Hi Laura,
The RLT can be set in the Masters Materials.MMR and Also in the Documnet Type Configuration.
But as per SAP standard Procedure the Prority will be the document type.
That means the RLT given in the Order document will overseed the RLT given in the MMR.
Go to material master and select MRP3 view. There see what is maintained for "Strategy group". Now go to OVZG, select this Requirement Class and tick the field "Rq" against this.
Now go to OVZH, select your Requirement Type and ensure that the above Requirement Class is assigned to your Requirement Type.
Now create a sale order and check in MD04.
Hope ethis helps u..
Cheerzz..
subbzz..

Download data to Excel- very urgent pls help

Hi Experts
Following is my coding. i need to download and save the it_material table as Excel file.
pls help me out
REPORT zvio1001 LINE-SIZE 190
           LINE-COUNT 55
           MESSAGE-ID zz
           NO STANDARD PAGE HEADING.
TABLES: mara,marce,makt,marc,mvke,zmpkg,t005t,cdhdr.
DATA : BEGIN OF it_mara OCCURS 0,
         mandt LIKE mara-mandt,          "Client
         matnr LIKE mara-matnr,
         meins LIKE mara-meins,
         laeda LIKE mara-laeda,
         aenam LIKE mara-aenam,
       END OF it_mara.
DATA : BEGIN OF it_marc OCCURS 0,
       matnr LIKE marc-matnr,
       werks LIKE marc-werks,
       END OF it_marc.
DATA : BEGIN OF it_makt OCCURS 0,
       matnr LIKE makt-matnr,
       maktx LIKE makt-maktx,
       END OF it_makt.
DATA : BEGIN OF it_zmpkg OCCURS 0,
       matnr LIKE makt-matnr,
       zppqt LIKE zmpkg-zppqt,
       zspqt LIKE zmpkg-zspqt,
       zpmqt_3 LIKE zmpkg-zpmqt_3,
       END OF it_zmpkg .
DATA : BEGIN OF it_material OCCURS 0,
         mandt LIKE mara-mandt,          "Client
         werks LIKE marc-werks,
         matnr LIKE marc-matnr,
         maktx LIKE makt-maktx,
         meins LIKE mara-meins,
         zppqt LIKE zmpkg-zppqt,
         zspqt LIKE zmpkg-zspqt,
         zpmqt_3 LIKE zmpkg-zpmqt_3,
         laeda LIKE mara-laeda,
         aenam LIKE mara-aenam,
         date LIKE sy-datum,
         time LIKE sy-uzeit,
         user    LIKE sy-uname,
       END OF it_material.
P a r a m e t e r s                                                 *
Start of tabbed screens
SELECTION-SCREEN BEGIN OF TABBED BLOCK list FOR 20 LINES.
SELECTION-SCREEN TAB (30) gc_gen USER-COMMAND gen_tab
                                    DEFAULT SCREEN 1001.
SELECTION-SCREEN TAB (30) gc_view USER-COMMAND view_tab
                                    DEFAULT SCREEN 1002.
SELECTION-SCREEN TAB (30) gc_outp USER-COMMAND outp_tab
                                    DEFAULT SCREEN 1003.
SELECTION-SCREEN END OF BLOCK list.
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK box01 WITH FRAME TITLE text-401.
PARAMETERS : p_werks LIKE marc-werks OBLIGATORY.
PARAMETERS : p_vkorg LIKE mvke-vkorg OBLIGATORY.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
SELECT-OPTIONS : s_mtart FOR mara-mtart.
SELECT-OPTIONS : s_mmsta FOR marc-mmsta.                           "A01
SELECT-OPTIONS : s_dispo FOR marc-dispo.
SELECT-OPTIONS : s_beskz FOR marc-beskz.
SELECT-OPTIONS : s_lgpro FOR marc-lgpro.
SELECT-OPTIONS : s_lgfsb FOR marc-lgfsb.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-014.
PARAMETERS : p_repall RADIOBUTTON GROUP sel2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-011.
PARAMETERS : p_change RADIOBUTTON GROUP sel2.
SELECTION-SCREEN COMMENT 36(1) text-013.
PARAMETERS : p_chgdat LIKE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-010.
PARAMETERS : p_excdel AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END   OF BLOCK box01.
SELECTION-SCREEN END OF SCREEN 1001.
View Selection Screen
SELECTION-SCREEN BEGIN OF SCREEN 1002 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK box05 WITH FRAME TITLE text-403.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(77) text-109.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-021.
PARAMETERS: p_sales AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 38(20) text-022.
PARAMETERS: p_mrp AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-023.
PARAMETERS: p_store AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 38(20) text-024.
PARAMETERS: p_accnt AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-025.
PARAMETERS: p_cost AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 38(20) text-026.
PARAMETERS: p_purch AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END   OF BLOCK box05.
SELECTION-SCREEN END OF SCREEN 1002.
SELECTION-SCREEN BEGIN OF SCREEN 1003 AS SUBSCREEN.
extract format selection
SELECTION-SCREEN BEGIN OF BLOCK box04 WITH FRAME TITLE text-402.
PARAMETERS : p_vari LIKE ltdxt-variant OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-009.
PARAMETERS: p_report RADIOBUTTON GROUP sel1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-016.
PARAMETERS : p_repcoo RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-017.
PARAMETERS : p_reppak RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-008.
PARAMETERS: p_extun RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-007.
PARAMETERS: p_extpc RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p_pcfile LIKE rlgrap-filename
           DEFAULT 'c:\#ups\CLIENTIDCCYYMMDDHHMMSS.ITM'.
            DEFAULT 'd:\P0121205MMM_YYYYMMDD HHMMSS.XLS'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(40) text-015.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END   OF BLOCK box04.
SELECTION-SCREEN END OF SCREEN 1003.
F i e l d   S y m b o l s                                           *
FIELD-SYMBOLS: <f>.
D a t a                                                             *
common include for file layouts
INCLUDE zvin1010.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'P_PCFILE'.
      screen-input = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
                 I N I T I A L I Z A T I O N                         *
INITIALIZATION.
gc_gen   = text-401.
gc_outp = text-402.
gc_view = text-403.
SET up the file directory depending on the system id.
GET PARAMETER ID 'WRK' FIELD p_werks.
GET PARAMETER ID 'VKO' FIELD p_vkorg.
CLEAR s_mtart.
s_mtart-sign   = 'E'.
s_mtart-option = 'EQ'.
s_mtart-low    = 'ROH'.
s_mtart-high   = ''.
APPEND s_mtart.
CLEAR s_mtart.
s_mtart-sign   = 'E'.
s_mtart-option = 'EQ'.
s_mtart-low    = 'MFPK'.
s_mtart-high   = ''.
APPEND s_mtart.
CLEAR s_mtart.
s_mtart-sign   = 'E'.
s_mtart-option = 'EQ'.
s_mtart-low    = 'VERP'.
s_mtart-high   = ''.
APPEND s_mtart.
START-OF-SELECTION.
check that the download is active
PERFORM get_data.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
FORM get_data .
SELECT   mandt matnr meins laeda aenam
FROM mara
INTO TABLE it_mara
WHERE matnr IN s_matnr.
IF NOT it_mara[] IS INITIAL.
SELECT matnr werks
FROM marc
INTO TABLE it_marc
FOR ALL ENTRIES IN it_mara
WHERE matnr = it_mara-matnr
AND werks = p_werks.
SELECT matnr maktx
FROM makt
INTO TABLE it_makt
FOR ALL ENTRIES IN it_marc
WHERE matnr = it_marc-matnr
AND spras = 'E'.
SELECT matnr zppqt zspqt zpmqt_3
   INTO TABLE    it_zmpkg
   FROM zmpkg
   FOR ALL ENTRIES IN it_marc
WHERE matnr = it_marc-matnr
AND werks = p_werks.
ENDIF.
LOOP AT it_mara.
READ TABLE it_marc WITH KEY matnr = it_mara-matnr.
IF sy-subrc EQ 0.
READ TABLE it_makt WITH KEY matnr = it_mara-matnr.
IF sy-subrc EQ 0.
READ TABLE it_zmpkg WITH KEY matnr = it_mara-matnr.
IF sy-subrc EQ 0.
it_material-mandt = it_mara-mandt.
it_material-matnr = it_mara-matnr.
it_material-maktx = it_makt-maktx.
it_material-meins = it_mara-meins.
it_material-laeda = it_mara-laeda.
it_material-aenam = it_mara-aenam.
it_material-werks = it_marc-werks.
it_material-zppqt = it_zmpkg-zppqt.
it_material-zspqt = it_zmpkg-zspqt.
it_material-zpmqt_3 = it_zmpkg-zpmqt_3.
it_material-date = sy-datum.
it_material-time = sy-uzeit.
it_material-user = sy-uname.
APPEND it_material.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.                    " GET_DATA

Hi Kumar,
     After building your it_material internal table, try using GUIO_DOWNLOAD to load the data into an excel sheet.
check this sample code.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      FILENAME                = SELECT_FILE   " Filename
      FILETYPE                = 'ASC'
      APPEND                  = ' '
    TABLES
      DATA_TAB                = ITAB_STR_1
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      OTHERS                  = 22.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    EXIT.
ENDIF.
Hope this is helpful to you. If you need further information, revert back.
Reward all the helpful answers.
Regards
Nagaraj T

Select statement- very urgent pls help

hi
i want to extract following fields into one internal table.
anyone pls help me to do this?
mara-mandt, mara-matnr, mara-meins, mara-laeda, mara-aenam, marc-werks, makt-maktx, sy-datum, sy-uzeit, sy-uname
Thanks
Kumar

Hi Kumar K,
TABLES: MARA, MARC, MAKT.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
PARAMETERS : P_WERKS LIKE MARC-WERKS OBLIGATORY.
DATA :      BEGIN OF WA_FINAL,
     MANDT LIKE MARA-MANDT,
     MATNR LIKE MARA-MATNR,
     MEINS LIKE MARA-MEINS,
     LAEDA LIKE MARA-LAEDA,
     AENAM LIKE MARA-AENAM,
     WERKS LIKE MARC-WERKS,
     MAKTX LIKE MAKT-MAKTX,
DATE TYPE SY-DATUM,
TIME TYPE SY-UZEIT,
UNAME TYPE SY-UNAME,
     END OF WA_FINAL,
     BEGIN OF WA_MARA,
     MANDT LIKE MARA-MANDT,
     MATNR LIKE MARA-MATNR,
     MEINS LIKE MARA-MEINS,
     LAEDA LIKE MARA-LAEDA,
     AENAM LIKE MARA-AENAM,
     END OF WA_MARA,
     BEGIN OF WA_MAKT,
     MATNR LIKE MAKT-MATNR,
     MAKTX LIKE MAKT-MAKTX,
     END OF WA_MAKT,
     BEGIN OF WA_MARC,
     MATNR LIKE MARC-MATNR,
     WERKS LIKE MARC-WERKS,
     END OF WA_MARC.
DATA : IT_MARA LIKE STANDARD TABLE OF WA_MARA WITH HEADER LINE,
IT_FINAL LIKE STANDARD TABLE OF WA_FINAL WITH HEADER LINE,
IT_MAKT LIKE STANDARD TABLE OF WA_MAKT WITH HEADER LINE,
IT_MARC LIKE STANDARD TABLE OF WA_MARC WITH HEADER LINE.
SELECT   MANDT
     MATNR
     MEINS
     LAEDA
     AENAM
FROM MARA
INTO TABLE IT_MARA
WHERE MATNR IN S_MATNR.
IF IT_MARA[] IS NOT INITIAL.
SELECT MATNR
WERKS
FROM MARC
INTO TABLE IT_MARC
FOR ALL ENTRIES IN IT_MARA
WHERE MATNR = IT_MARA-MATNR
AND WERKS = P_WERKS.
ENDIF.
IF IT_MARA[] IS NOT INITIAL.
SELECT MATNR
             MAKTX
FROM MAKT
INTO TABLE IT_MAKT
FOR ALL ENTRIES IN IT_MARA
WHERE MATNR = IT_MARA-MATNR.
ENDIF.
LOOP AT IT_MARA.
IT_FINAL-MANDT = IT_MARA-MANDT.
IT_FINAL-MATNR = IT_MARA-MATNR.
IT_FINAL-MEINS = IT_MARA-MEINS.
IT_FINAL-LAEDA = IT_MARA-LAEDA.
IT_FINAL-AENAM = IT_MARA-AENAM.
READ TABLE IT_MARC WITH KEY MATNR = IT_MARA-MATNR.
IF SY-SUBRC = 0.
IT_FINAL-WERKS = IT_MARC-WERKS.
ENDIF.
READ TABLE IT_MAKT WITH KEY MATNR = IT_MARA-MATNR.
IF SY-SUBRC = 0.
IT_FINAL-MAKTX = IT_MAKT-MAKTX.
ENDIF.
IT_FINAL-DATE = SY-DATUM.
IT_FINAL-TIME = SY-UZEIT.
IT_FINAL-UNAME = SY-UNAME.
APPEND IT_FINAL.
CLEAR : IT_FINAL, IT_MARA , IT_MAKT, IT_MARC.
ENDLOOP.
now IT_FINAL table contains the final data which you want...
Hope it will solve your problem
Reward points if useful...
Thanks & Regards
ilesh 24x7

Sec. Edu Cess not Flowing in MIGO - Urgent Pls help

Dear Friends
We have created a IMPORT PO,
Invoice verification is done with all necessary cess and duties which flown.
with the MIRO document and year, when we do MIGO, i am able to see duty, cess but secondary edu.cess is not flowing.
I tried to enter it manually also, but it is not accepting (field is open).
I have checked the settings.
The similar kind of PO, before it had been done, MIRO done, MIGO also done with proper flow of all values. But for this particular PO only problem existing.
Only difference between the two PO is problematic PO is with account assignment category Q.
Pls treat this urgent and help me in solving the same friends.
regards
Panneer

For Imports, condition type for SECess is <b>J1CV,</b> you have to maintain this condition type in Excise Defaults of CIN Customization.
Note - You cannot use any other condition type for SECess for Imports other than J1CV.
Cheers..
Santosh.D
<i>Reward Points if Helpfull</i>

Its urgent pls help me .

how can i call a portal from webdynpro application
my requirment is
i was created webdynpro application.
in that i was created one view . in that i was created one button (go).
if i click that button i want move some other portal.
how can i acchive pls help me.
its urgent.
pls send any example programe
Message was edited by:
madipadiga nagaraju
Message was edited by:
madipadiga nagaraju

hi,
there is no direct tcode for going to webdynpro component/interfaces in ecc 6.0.
but u have se58 in ecc 5.0,as webdynpro convertor.u give ur program name and click web dynpro convertor button then it takes u to se80 .but this wda(webdynpro abap) component comes as in application tree hierarchy .
i can say in wda component refers a class .if u select webdynpro component/interface,it ask u to create a class or interface.
after that it automatically generate component controller(it is also a class),
interface view and windows.all these 3 are classes.for every window one interface view will be created.ie.. window is internal visible where as interface view is external visible.
u create view and embed these views in windows.by going to the window layout,right click on the window name and click embed view.u can enbed as many view as u wish.in order to navigate from one view to other view ,click "create navigation" by right clicking the view plugs.
by default windows and view have inbound plugs.this is literally a event of that class.
if u want to navigate from view1 to view2 ,create outbound plug for view1,the click outbound plug of view1 and right click the click create navigation the select inbound plug of view2.
then create a application .this is simillar of creating an object.
click on this object and test .this will open in browser.
for deploying u have use "sap webdynpro iview".

Hi guys (very urgent pls help me out)

i have an doubt that iam using JBoss AS, my scienraio is
inital when start my Application Server it will connects to mysql DB datasource, i will retrieve some values those are DB Names like oracle,sql server,db2 etc in my JSP page iam placed at combo box upto this i am very much successful but now my problem is after gettinh those values in html select box.
if user selects Oracle and in the same screen user can enter connection config details and after submitting the request. At runtime App Server want to connect for that particular Database.
for ex Oracle and its connection parameters then it want to connect that particular Database without restarting the server.
so mysql is internal DB and Oracle is external db. how to manage this scienraio
please anyone knows solution, pls help me out......
regards
Yadav

hi
the message is very clear that the sold to party ur refering is not from the same sales area. if u have the customer already then extend the same to the said sales area, by common division and distribution channel
<b>reward points</b>
Regards

Download ALV to EXcel- Urgent pls help me

Please help me in this...
I have an ALV report around 120 column. The report is displayed perfectly on screen. But when I use the Export option to download as an excel file, some data is missing in SAP No field
For example
My report output is like this
sap No    Name    Jobdes.   Dept
00021     AAA      clerk1      FI
00022     BBB      clerk1      FI
00023     CCC      clerk1      FI
00024     DDD      clerk1      FI
00025     EEE      clerk1      FI
00026     FFF      clerk1       FI
Excel output is
sap No    Name    Jobdes.   Dept
00021     AAA      clerk1      FI
Blank     BBB      clerk1      FI
Blank     CCC      clerk1      FI
Blank     DDD      clerk1      FI
00025     EEE      clerk1      FI
Blank    FFF      clerk1       FI
Pls help me

Hi Kumar,
          Pls try the below Function Modules to download the data to excel.
ALSM_EXCEL_TO_INTERNAL_TABLE
KCD_EXCEL_OLE_TO_INT_CONVERT Uploads data directly from Excel sheet
RH_START_EXCEL_WITH_DATA Starts Excel with contents of an internal table
or the below links also might help you.
For uploading Excel to Internal Table??????
Data from Excel sheet to my internal table
Check the following link:
http://www.sap-img.com/abap/upload-direct-excel.htm
or even the below code might be helpful.
Multiple excel sheets generation in a workbook
CREATE OBJECT EXCEL 'EXCEL.SHEET'.
GET PROPERTY OF EXCEL 'Application' = APPLICATION.
SET PROPERTY OF APPLICATION 'Visible' = 1.
CALL METHOD OF APPLICATION 'Workbooks' = BOOKS.
CALL METHOD OF BOOKS 'Add' = BOOK.
CALL METHOD OF BOOK 'WORKSHEETS' = SHEET.
CALL METHOD OF SHEET 'ADD'.
Fill all the sheets with relavant data
PERFORM SHEET1 TABLES ITAB1.
PERFORM SHEET2 TABLES ITAB2.
PERFORM SHEET3 TABLES ITAB3.
PERFORM SHEET4 TABLES ITAB4.
Quit the excel after use
CALL METHOD OF EXCEL 'QUIT'.
FREE OBJECT: COLUMN,SHEET,BOOK,BOOKS,APPLICATION,EXCEL. "NO FLUSH.
CLEAR V_SHEET.
FORM FILL_CELL USING ROW COL VAL.
CALL METHOD OF SHEET 'cells' = CELL NO FLUSH
EXPORTING #1 = ROW #2 = COL.
SET PROPERTY OF CELL 'value' = VAL.
FREE OBJECT CELL NO FLUSH.
ENDFORM. " FILL_CELL
FORM SHEET1 TABLES ITAB1 STRUCTURE ITAB1.
V_SHEET = Sheet Name.
V_NO = V_NO + 1.
CALL METHOD OF BOOK 'worksheets' = SHEET NO FLUSH EXPORTING #1 = V_NO.
SET PROPERTY OF SHEET 'Name' = V_SHEET NO FLUSH.
PERFORM FILL_SHEET1 TABLES ITAB1 USING V_NO V_SHEET.
CALL METHOD OF SHEET 'Columns' = COLUMN.
FREE OBJECT SHEET.
CALL METHOD OF COLUMN 'Autofit'.
FREE OBJECT COLUMN.
ENDFORM.
Repeat above procedure for all sheets you want to add
FORM FILL_SHEET1
TABLES ITAB1 STRUCTURE ITAB1
USING V_NO V_SHEET.
ROW = 1.
PERFORM FILL_CELL USING ROW 1 'Column1 Name'.
PERFORM FILL_CELL USING ROW 2 'Column2 Name'.
PERFORM FILL_CELL USING ROW 3 'Column3 Name'.
ROW = ROW + 1.
LOOP AT ITAB1.
PERFORM FILL_CELL USING ROW 1 ITAB1-Column1.
PERFORM FILL_CELL USING ROW 2 ITAB1-Column2.
PERFORM FILL_CELL USING ROW 3 ITAB1-Column3.
ROW = ROW + 1.
ENDLOOP.
ENDFORM.
Repeat above procedure for all sheets you want to add
Try this also
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
Upload Excel file
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file
TABLES
i_tab_converted_data = i_XCEL[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Pls reward if useful.
THanks,
Sirisha

Urgent Pls Help Me

I am using the reports 6i and running it on web in excel format and pdf format.
I want to highlight a particular row with some color based on some condition on of the column
how do i do this, pls help me
Vinod

Bear in mind that your 'Excel' format is really just delimited data and a pure ASCII file, which doesn't support the type of highlighting that you're requesting.
In 9i you can use jsp technology to embed reports data directly into an Excel spreadsheet. In this case you could probably also include either an Excel macro, or execute some java code that highlighted the appropriate row/values.
There's an example of this jsp approach available on the demos page available at http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
Hope this helps,
Danny

Very URGENT: PLS HELP:canno resolve symbol session.setAttrribute

hi everbody,
i'm new at this and have got a presentation after 1 day!....pls help
when i compile the servlet i get :
cannot resolve symbol
metod: setAttribute (java.lang.String,java.lang.String)
location: interface(javax.servlet.http.HttpSession)
the servlet that gets te error when comiled is:
* Authenticate.java
// this places all user variables in session
//to access use session.getAttribute
//dispatcher stuff
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.http.HttpSession;
import javax.servlet.http.HttpServlet;
import javax.servlet.ServletConfig;
import javax.servlet.ServletContext;
import javax.servlet.ServletException;
import java.sql.*;
import java.io.*;
import java.util.*;
* @author Gudiya
* @version
public class Authenticate extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, java.io.IOException {
HttpSession session = request.getSession(true);
Connection con=null;
String sessionid;
String deptcode;
String desig;
String add1;
String add2;
String contname;
PrintWriter out = response.getWriter();
try
response.setContentType("text/html");
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:SACFA","","");
System.out.println("connection established");
catch(ClassNotFoundException e){
System.out.println("database driver not found");
System.out.println(e.toString());
catch(Exception e){System.out.println(e.toString());
// ServletContext context=getServletContext();
String username=request.getParameter("username");
String password=request.getParameter("password");
try{
PreparedStatement stmt=con.prepareStatement("SELECT * FROM AUTHENTICATION,mb_add where AUTHENTICATION.NAME=? AND AUTHENTICATION.PASSWORD=? AND mb_add.DEPT_NAME=?");
stmt.setString(1,username);
stmt.setString(2,password);
stmt.setString(3,username);
ResultSet rs=stmt.executeQuery();
boolean rowfound=false;
rowfound=rs.next();
if (rowfound==true)
sessionid=session.getId();
System.out.println(sessionid);
//context.setAttribute("userid",sessionid);
// session.setAttribute("user",username);
rs.beforeFirst();
while (rs.next())
deptcode=rs.getString("DEPT_CODE");
desig=rs.getString("DESIGNATION");
add1=rs.getString("ADDRESS1");
add2=rs.getString("ADDRESS2");
contname=rs.getString("NAME");
session.setAttribute("dept_code",deptcode);
session.setAttribute("designation",desig);
session.setAttribute("address1",add1);
session.setAttribute("address2",add2);
session.setAttribute("cont_name",contname);
//context.getRequestDispatcher(request.getParameter("dispatcho")).forward(request,response);
}          out.println("<html>");
          out.println("<head>");
          out.println("<title>Successful Login Screen</title>");
          out.println("</head>");
          out.println("<body bgcolor='ORANGE'>");
out.println("<script language='Javascript'>");
out.println("");
out.println("</script>");
out.println("WELCOME MEMBERS FROM "+ username);
//print decorative html statements here
          out.println(" SELECT NY ONE ACTION:-");
out.println("<form Action="+"\"servlet/noc\""+" method =post>");//call for your noc servlet
//print decorative html statements here
out.println("<INPUT TYPE=submit VALUE='GENERATE NOC' NAME='NOC' language='javascript'>");
out.println("</form>");
//print decorative html statements here
out.println("<form Action="+"\"servlet/comments\""+" method =post>");//call for your comment servlet
out.println("<INPUT TYPE=submit VALUE='ENTER/ MODIFY COMMENTS' NAME='COMMENTS' language='javascript' >");
out.println("</form>");
//print decorative html statements here
out.println("<form Action="+"\"servlet/bye\""+" method = post>");
out.println("<INPUT TYPE=submit VALUE=EXIT NAME=EXIT language='javascript' >"); //place javascript fucction for exiting window
out.println("</form>");
          out.println("</body>");
          out.println("</html>");
con.close();
} catch( SQLException e){ }
out.close();}
NOTE: I'M USING JDK1.3 and jsdk2.0
pls help me....
Thank u all,
ashna

HTTP Status 404 - /mywork/servlet/Authenticate
hi dheeraj,
thank u so much the servlet comiled!!!
now i have a new problem....the Tomcat server cannot find its class file. i have placed the class file in C:\Program Files\Apache Group\Tomcat 4.1\webapps\mywork\WEB-INF\classes.
the error it shows is as follows:
type Status report
message /mywork/servlet/Authenticate
description The requested resource (/mywork/servlet/Authenticate) is not available.
Apache Tomcat/4.1.18-LE-jdk14
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11

Error in Dictionary DC deployment (URGENT Pls help)

Hi experts,
I am getting following error while deploying the Dictionary DC.
I made changes in one database table (changing field length, added new columns).
It got builtr successfully but deployment is giving errror, hence aborted.
This is the trace m getting:-
Pls pls help as soon as possible...
May 5, 2008 4:38:28 PM Info: Starting: Update: Selected development component 'BshopDic'/'asianpaints.com'/'J2E_BODYSHOP_D'/'20080505171925' updates currently deployed development component 'BshopDic'/'asianpaints.com'/'J2E_BODYSHOP_D'/'20080505170547'.
May 5, 2008 4:38:40 PM Info: <!LOGHEADERSTART/>
May 5, 2008 4:38:40 PM Info: <!HELPManual modification of the header may cause parsing problem!/>
May 5, 2008 4:38:40 PM Info: <!LOGGINGVERSIONhttp://1.5.3.7186 - 630/>
May 5, 2008 4:38:40 PM Info: <!NAME[/usr/sap/J2E/JC00/SDM/program/log/jddilog20080505163828.log]/>
May 5, 2008 4:38:40 PM Info: <!PATTERNhttp://jddilog20080505163828.log/>
May 5, 2008 4:38:40 PM Info: <!FORMATTERhttp://com.sap.dictionary.database.dbs.DbTraceFormatter(%s %m %-30l %24d)/>
May 5, 2008 4:38:40 PM Info: <!ENCODINGISO8859_1/>
May 5, 2008 4:38:40 PM Info: <!LOGHEADEREND/>
May 5, 2008 4:38:40 PM Info: 16:38:28 2008-05-05 dbs-Info: <<<<<<<<<<<<<< Table Deployment >>>>>>>>>>>>>
May 5, 2008 4:38:40 PM Info: 16:38:28 2008-05-05 dbs-Info:
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: <<< Analyze table BC_DDDBRTH >>>
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: predefined action is: >>>null<<<
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: No action required for table
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: <<< Analyze table BC_DDDBTABLERT >>>
May 5, 2008 4:38:40 PM Info: 1
6:38:29 2008-05-05 dbs-Info: predefined action is: >>>null<<<
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: No action required for table
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: <<< Analyze table BC_DDDBRTH >>>
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: predefined action is: >>>null<<<
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: No action required for table
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: <<< Analyze table BC_DDDBRTX >>>
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: predefined action is: >>>null<<<
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: No action required for table
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: >>> Analyze tables from archive in database ORACLE
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: Next archive object : dbtables/BIT_AUTONUMBER.gdbtable
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: <<< Analyze table BIT_AUTONUMBER >>>
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: predefined action is: >>>null<<<
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: Action: CONVERT
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: Table has to be converted
May 5, 2008 4:38:40 PM Info:
May 5, 2008 4:38:40 PM Info: E R R O R ******* (DbModificationManager)
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Error: Table BIT_AUTONUMBER: Conversion currently not possible
May 5, 2008 4:38:40 PM Info:
May 5, 2008 4:38:40 PM Info: E R R O R ******* (DbModificationManager)
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Error: Table BIT_AUTONUMBER: Conversion currently not possible
May 5, 2008 4:38:40 PM Info: 16:38:29 2008-05-05 dbs-Info: Next archive object : dbtables/BIT_BRAND.gdbtable

Hi,
It looks like the conversion of datatype is making issues.
Either existing values are not complaint with the size changes you made.
To resolve this either you remove the existing records and deploy.
Take a backup of records and reimport later with default values to the newly added cols if they are not null.
Regards
Ayyapparaj

Query on Time Scheduling ............................Urgent pls help

Similar Messages

Maybe you are looking for