Query on Variable Exits

Hi,
I'm using quite a few customer exit variables which are used in more than one query. The Same variables are populated using different exits depending on the query. How do i make sure that the exit corresponding to a query alone is executed. I tried using the following but it doesnt seem to work
CASE i_s_rlbl1d-compid.
When 'query name'
THough it does not show any syntax error it does not serve the purpose of selective execution
Help would be appreciated

hi Ravi,
use i_s_rkb1d-compid should correct, (do you mistype i_s_rlbl1d ?)
Getting query name thru variables user exit
how do you put it in code ?
WHEN '[variable name]'.
break-point.
IF I_STEP = ...
case i_s_rkb1d-compid.
when 'query technical name'
when ' '
try to put a break-point and execute with RSRT option 'execubte+debug' and see if the code executed.
also geneate query again witt RSRT, and try menu 'environement' -> delete old abaps.
hope this helps.

Similar Messages

How do I...Mimic Replacement Path with Query using Customer Variable Exits?

Hello SDN:
We are on BW 3.5 SP16.
We are currently using a replacement path Query(RP) with variables
to populate a variable in another Query(T).
The problem we are having is with performance.
The entry of variables in replacement path Query(RP) is optional (This is necessary there cannot be required values)
When results from Replacement Path Query are small performance is fine. (e.g. 10 seconds)
When results from Replacement path query are large performance suffers. (e.g. 1+ minutes)
Users are free to leave the replacement path variables empty resulting in a large set of data to be replaced. This is the worst performance case.
We would like to discover a way to conditionally execute the replacement path query. That is if users do not enter values for the replacement Query(RP) variables do not execute the replacement path query(RP).
Does anyone know if this is possible within reason and in customer exit space?
We have reviewed the situation from all angles and the requirement for the replacement path FUNCTIONALITY and the freedom for the user to leave variable values blank remains.
I've been searching and reading SDN and SAP notes for about a week and do not find threads which address this situation.
We are also exploring Customer variable exits to mimic replacement path functionality
(different topic subject="How do I...Mimic Replacement Path with Query using Customer Variable Exits?")
Any help will be appreciated
Many thanks
David Schuh

My appologies-I posted this message with the wrong subject. I will repost it with appropriate subject.
dave schuh

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Variable exit in sap bi 7.0 is not working in web report

Hi Experts,
I had wrote a variable exit to get latest run date at variable screen for a variable.On the base query i have created query view.This query view is working fine when i am viewing from analyzer but on the web Im not getting latest run date but it taking some other date.
Can any body suggest any thing why system is behaving so strange.
Thanks
Vinod

Hi, Succhi
Note 1621031 - Incorrect status I1054 "To be distributed"
Note 1620893 - Screen output without connection to user - SMQ1
also check program CRM_DATAEXCHANGE_TOOLBOX
Denis

How to debug variable exit in Bi 7.0

Hi Experts,
I have code in variable exit in Bi 7.0, I am trying to debug in RSRT but im not able see my source code, Can you any body suggest me any thing or can suggest me steps to debug variable exit in bi 7.0.
Thanks
Vinod Kumar

Hi Vinod,
1) add following code into your exit-routine, at ??? fill your user-name:
Routine will STOP here,
than in new session call transaction SM50
find your query-request and mark the line
now go to menue line to -program/session and -debugging
DATA: help.
WHILE help IS INITIAL
AND sy-uname = '???'.
ENDWHILE.
2) after activation of exit-rountine start your query
3) open new session and call transaction SM50
4) check the list and look for your query-request and mark the line
5) now go to menue line to -program/session and -debugging
6) the run will stop at your while-statement
7) now you must change the contents of the variable help to '1' to leave the while-loop
8) with F5-Key you can proceed your coding
Regards
Edi
Edited by: Eduard Meder on Feb 19, 2009 12:40 PM

Help in Variable exit in Bi 7.0

Hi Experts,
For my requirement I need write a variable exit in BI 7 based on start date and end date.1)If user enquiry date is lies between current month +last 2 month then get data of 3 months ie current month( complete data before current week) + last 2month. 2)If user enquiry date lies beyond (current month + last 2 months ) then he get only data on which date lies.Can any suggest me how write variable exit for requirement and what would be abap code i need in variable exit.
Thanks
Vinod
Edited by: vinod kumar on Jan 27, 2009 5:35 AM

Hi Vinod,
Check here.........
Customer Exit variable
Customer Exit for Query Variable
Customer Exit for Query Variable
Re: variable customer exit
Thanks,
Vijay.

Variable Exit for Displaying last transaction or opening bal

Dear Experts,
material            year                period              amt         qty
abc                   2008                  01                4545         878
abc                   2008                  03                5255         900
def                   2008                  02                4333         1212
def                   2008                  05                4551         1555
like wise data is stored in infocube , i am going to create a query based on the infocube . In query i define a variable for period and year respectively .if i give the input of period as 02 and year 2008 for the opening stock should get displayed as
abc                   2008                  01                4545         878
def                   2008                  02                4333         1212
if i give input of period as 10 and year as 2008 i should get the values as
abc                   2008                  03                5255         900
def                   2008                  05                4551         1555
and also pls let me know how and where to write the variable exit
PS: This is Go Live Critical
Thanks and regards,
raj

Hi Frank.
Im sure its possible to find the date last year, but it will involve some programming and thinking about time/dates etc, unless you can do a lookup in the factorycalendar or "normal" calendar, stored in the system AND having the number of day info.
But you want to do this on the fly, in the report? I think performance might take a hit...
regards
jacob
Edited by: Jacob Jansen on Oct 8, 2009 8:53 PM
Edited by: Jacob Jansen on Oct 8, 2009 8:54 PM

Calculating difference between two dates in Variable Exits

Hi,
      I need to calculate the difference between the two dates in months in Variable exits. I want the result in months so that I need to find out the Average Usage.
        How can I find the difference between them in months.
Thanks
Dave.

Hi Christophe, Senthil
                                   Sorry for late response, I checked this MONTHS_BETWEEN_TWO_DATES_NEW in SE37/SE38 and about the date they are going to enter at query run time it should be like 03/03/2006 to 08/03/2006 and I should get in 5 months and or if the date range 03/15/2006 to 08/03/2006 and I should get like 4.5 months. Please could you tell me how to get the values in months or please give me a functional module so that I can use.
Thanks
Dave.

The window to select dimensions simply does not appear and I can't move forward, due to variables exit in the report

Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
*      wa2-low = |{ v_year_h }12|.
       IF sy-subrc EQ 0.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
*        wa1-low = wa2-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
    WHEN 'ZREDT2'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
       IF sy-subrc EQ 0.
*        wa2-low = |{ v_year_h }12|.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André Oliveira

I solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira

VARIABLE EXITS

Hi floks;
I need some information on why and how to create variable exits in BEx? can you please give me and business scenarios why to create variable exits and virtual KF exits? any documents would be highle appreciated also. [email protected]
Regards:
Gandaki

Hi,
Customer or Variable exit is done in CMOD transaction. There are 2 kinds of Exit project available for BEX one at the Data target level EXIT_SAPMRSRU_001 and one at the query level EXIT_SAPLRRS0_001.
Please see document below,
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/content.htm
Hope this helps
Arun

Please help me to correct the Variable exit

Hello,
I am trying to calculate the previous month from the user input 0CALMONTH variable 0I_CALMO. I have created another variable ZVPCALMON and have restricted a key figure Amount with this variable.
I have written the below code. When I debug the query I am able to get below in E_T_DATA
Sign -> I
OPT ->      EQ
LOW -> 200508
when I enter the variable 09/2005 but I dont get the data in the report. However when I run the report without restricting the keyfigure with ZVPCALMON and input the calmonth as 08/2005 I am able to get the data.
IF i_step = 2.
CASE i_vnam.
WHEN 'ZVPCALMON'.
        CLEAR : l_s_range,
                l_month_low,
                l_year,
                w_var_range.
      LOOP AT i_t_var_range INTO w_var_range WHERE vnam = '0i_CALMO' .
        l_year = w_var_range-LOW(4).
        l_month_low = w_var_range-low+4(2) - 1.
        IF l_month_low = 0.
          l_month_low = c_12.
          l_year = l_year - 1.
          CONCATENATE l_year
                      l_month_low INTO l_s_range-low.
        ELSE.
          CONCATENATE l_year
                     l_month_low INTO l_s_range-low.
        ENDIF.
        l_s_range-sign = c_sign_i.
        l_s_range-opt = c_range_opt_eq.
        APPEND l_s_range TO e_t_range.
      ENDLOOP.
    WHEN OTHERS.
ENDCASE.
ENDIF.
I think I am missing something. Could anyone suggest what could have been wrong.
Thanks,
KK

Hi KJ,
Thanks for the reply. I don't know why but a simple offset doesnt work either. I have restricted the key figure with 0CALMONTH Variable and put the offset '-1' but still I dont get the result. Thats the reason I have gone for the variable exit.
thanks,
Kalyan

Variable Exit Code i_step = 2

Hi There
I have an issue with the code of type i_step = 2. What i want to do is to check a table and if a certain value is in that table i want to include a restriction for all values for the caracteristic on which the variable is based.
My code looks like this:
IF zuser_auth-comp_code = '*'.
          ls_range-low = '*'.
          ls_range-sign = 'I'.
          ls_range-opt = 'CP'.
          APPEND ls_range to e_t_range.
          EXIT.
ENDIF.
THE CP = * restriction is used without problems for i_step = 0 variables but it does not work for i_step = 2. Does anybody know why or know another way to restrict to all values in a i_step = 2 variable exit??
I hope that you can help me.
/Chris

Hi again
You are right the I_step = 2 is executed after execution of the query. When i debug the exit my exit variable code is executed but the result is that the program ends with an illegal state.Below i have inserted the complete code.
WHEN 'ZCECCST2'. "Authorization check for Company Code
    IF i_step = '2'.
      READ TABLE i_t_var_range into loc_var_range with key IOBJNM = '0COMP_CODE'.
      if sy-subrc <> '0'.
      SELECT * FROM ZUSER_AUTH WHERE
          username = l_uname.
      IF zuser_auth-comp_code = '*'.
          SELECT comp_code from /bi0/mcomp_code into ls_range-low.
          ls_range-low = '*'.
          ls_range-sign = 'I'.
          ls_range-opt = 'CP'.
          APPEND ls_range to e_t_range.
          ENDSELECT.
          EXIT.
      ELSE.
          ls_range-low = zuser_auth-comp_code.
          ls_range-sign = 'I'.
          ls_range-opt = 'EQ'.
          if ls_range-low <> ''.
            APPEND ls_range to e_t_range.
          endif.
      ENDIF.
      ENDSELECT.
      ELSE.
          ls_range-low = loc_var_range-low.
          ls_range-sign = 'I'.
          ls_range-opt = 'EQ'.
          APPEND ls_range to e_t_range.
      ENDIF.
endif.
/Chris

Variable exit not taking multiple single values...urgent pls

Hi BW Guru's
I have created an variable exit where the variable represents mulitple single values.
In the customer exit when i trying to populate mulitiple values and move it to e_t_range it is not taking multiple values. I have also observed that it is a line item type. I want to know if there is anyway out since it is an urgent requirement. Any help would highly appreciated. I shall also award points accordingly. Thanks.

Hi Anil,
Thanks for your prompt response.
I guess i am missing out some thing.
The scenaio is like this I want to hard code some values which have to be removed from the selection hence I have created the variable with multiple single value variable and I have removed (unchecked) ready for input as it is not required. After your suggestion I have also made it mandatory but after running the query I am getting a message Abort no value determined. I have written this code under if i_step = 1.
My code goes like this.
DATA: BEGIN OF I_SO_VENDNO occurs 0,
        SOURCSYS TYPE /BIC/TZSO_VEND-/BIC/ZSOURCSYS,
        ZSO_VEND TYPE /BIC/TZSO_VEND-/BIC/ZSO_VEND,
        TXTMD TYPE /BIC/TZSO_VEND-TXTMD,
      END OF I_SO_VENDNO.
select * from /BIC/TZSO_VEND into table i_so_vendno.
loop at i_so_vendno where TXTMD CS 'GREAT LAKES'.
      l_s_range-low = i_so_vendno-zso_vend.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'NE'.
      append l_s_range to e_t_range.
      clear: e_t_range, l_s_range, i_so_vendno.
endloop.
Want to know if I am missing out something.
Thanks.

Reg Variable exit

Hi Bw xpertz
Is there possibility to use variable exits in a query?
If possible how? if not HOw?
Can any one give the clarification please..
Thanx IN Advance
Regards
Krish
Bangalore

Hi krish,
we have SAP Exit variables as well as Custmoer exit variables.
for customer exits in variables...we have to choose processing type as 'customer exit' while creating a variable..corresponding code should be written in CMOD transaction in BW.
pl refer this post to download how to do...documnet.
customer exit help
Take a look at
User exit
Re: User Exit for Global Variables
Re: User exit for BEX vaeiable
Re: Where do I write the code for customer exit variable?
Hope this helps in understanding about user exits in variables.
Please don't forget to assign points if it helps
regards

Error while trying to Execute the Query with Customer Exit

Hi Experts,
I am having a Query with Customer Exit, it is working fine for all the Employess, except for one. When i try to remove the Customer Exit it is working for her too. Below is the error i am getting.
system error in program SAPLLRK0 and form RSRDR; CHECK_NAV_INIT_BACK
Thanks,
Kris.

Hello Kris,
Are you working with multiprovider? Please check if OSS notes 813454,840080 or 578948 are applicable in your case.
Regards,
Praveen

Query on Variable Exits

Similar Messages

Maybe you are looking for