Query on virtual cube showing incorrect values

Experts,
I have create a virtual cube on a base cube using services (info-source). both virtual as well base cube are z-development and are in BI.
Base cube has 6 records, now when I check data in virtual cube using display data it shows correct values based on routine written in virtual cube transformation.
Problem is when I created query on this virtual cube it doesnt show correct data or sometime no applicable data. After debugging I found, in end routine itself result package contains records with blank values in it on which I have written routine. But it does this only while executing query not when I display data in cube.
Regards,
Akshay

Hi!!!
And how do you solved it?

Similar Messages

Query key figures showing incorrect values

Hi,
key figures in my query are showing incorrect values NO CALC POSSIBLE
Data in the cube is coming from different datasources and the cube is compressed.
this is how data in the cube looks like
plant    Unit   currency    Stock Quantity    Stock Value   total ( *** key figure ( inflow and outflow)
P001    ST                         1000                   0
P001             EUR                                    100
Query result
plant       stock(PC)            Stock Quantity   Stock Value       total ( cumy figure ( inflow and outflow)
P001       No Cal possible    1000                  100                   No Cal possible
How do I resolve in query or cube level so that the NO CALC possible is not displayed.
thanks

Hi,
Indeed my cube is a copy of 0IC_C03.
Could you please explain more about the filtering.
I have the following key figures
0TOTALSTCK
0ISSTOTSTCK
0RECTOTSTCK
ZISSSTCK_VALUE
ZREC_VALUE
ZTOTSTKVALUE
ZTOTSTKVALUE is CKF with inflow and outflow of ZISSSTCK_VALUE
ZREC_VALUE
Whenever there is 0 it displays NO CALC possible. I would like to have it blank or 0s.
thanks

Report to correct FD33 report is showing incorrect values ??

Hi Guys,
Will appreciate your help on below issue.
The "RVKRED88 - Reorganization of SD credit data after updating errors" report is showing incorrect values.
It is specially observed for invoice correction requests that are credit blocked.
The doc flow is like Order (say value 1000 $), delivery, shipment, Picking, GI, billing, accounting all cleared/complete.
The invoice corrrection req (say value -ve 50$) was then created with reference to the billing doc.
The RVKRED88 report shws the original order as open and also shows an open delivery value of 1000$ + 50$= 1050$.
Is this behaviour correct? If not what might be the cause of this? and how to correct it?
Regards,
Naminator
Edited by: Naminator on Jul 7, 2009 6:22 PM

I am not sure, how come you are getting correct numbers for UK plant if BX is not loaded. You can get numbers correctly only in one situation which is your initial stock at that plant was ZERO, which is practically not possible.
You said you are loading for Denmark only.
Was the BF init done only for UK?
How come you are loading BF Delta for UK only?
Did you check properly that BX is not loaded into production by changing the date range. Make sure you put the lowest date range in the from field. I would put 01/01/1000
As you said ISS is coming right because those are movements and they dont have to do anything with initial stock, but initial stock and movements affec your Total Stock Key Figure.
- Danny

Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal

Hello all,
We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
Thanks in advance,

Hi Kiran,
Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
Try to create one record in remote data source and load it again. It may be find the latest status.
Thanks,
Chandra

0weekday1 is showing incorrect values

Hi,
After the upgrade it has been noticed that the Time characteristic 0weekday1 is showing incorrect text mapping in Bex Reports reports.
After analysis and Investigation I found that
In master data it is maintained as follows which is correct
1 - Sunday
2 - Monday
3 - Tuesday
4 - Wednesday
5 - Thursday
6 - Friday
7 - Saturday
But In the multiprovider, when I do F4 on the filed 0weekday1 it is showing the following values
1 - Monday
2 - Tuesday
3 - Wednesday
4 - Thursday
5 - Friday
6 - Saturday
7 - Sunday.
In RSRV it is showing inconsistencies but when I tried to do the correction it is failing.
I have done the info Object repair for 0weekday1 in RSD1. but still the values have not changed.
Please suggest resolutions to this !!!
Thanks,
Shantanu.

Hi,
When I see the master data it is maintained properly as stated above.
But, when I checked the Master Data Read class, it is found that the data is coming from T246 table which is SAP maintained table. And the entries made in T246 table are the one which are incorrectly mapped.
So, my questions are:
1. Can we change the values directly in T246 table.
2. What other programs/objects, etc will be impacted.
3. Do we have something as "Where used list" for the Tables.
Thanks,
Shantanu.

SolMan query of BI content shows wrong values

Hi,
at the TA STWB_INFO I can see a testplan ABC with 1 OK-result, 1Error-result and 3 "no-results".
The multi-provider 0SM_TWB_M is activated from the BI-content and its infocube 0SM_TWB is filled with data (as I can see at the sucessfull request status for the last requests for this cube TA RSA1).
However, when excecuting the query 0TWB_TESTPLAN_STATUS to see the results for the testplan ABC I see different results than in the TA STWB_INFO (only 1 OK-rseult and 3 no-results, the error is missing.)
Any help on this?
Thanks

Hi Robert,
I managed to access the work centre, I didnt have the correct roles assigned initially. I am now trying to schedule the extraction and I get the following error 'Content Activation Log
Log for Setup ID 20100813143454
20100813 143454[ERROR ]: Current Status: ERROR
20100813 143454[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100813 143455[ERROR ]: Incorrect system setting: standard transport is active
20100813 143455[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100813 143455[ERROR ]: Prerequisites check failed
20100813 143454[ERROR ]: Jobname/count: CCMS_BI_SETUP 14324400
20100813 143454[ERROR ]: Jobname/count: CCMS_BI_SETUP 14345400
20100813 143454[ERROR ]: Jobname/count: CCMS_BI_SETUP 14370500"
Any idea what I need to set these user parameters to?
Many thanks.

Query output in APD shows zero values

Hi ,
I am using query output in APD . The query has got some calculated key figures for which the output result of the query in APD shows zero .Is there any way to resolve this .
regards,

Hi,
You need to store the source key figure value in a separate variable lets say v1 then **** the new variable v1 value to circular right, then remove the gaps, and then again shift V1 right by deleting trailing spaces and then finally copy the value in V1 to source or target key figure.
Hope this helps.
- Kiran

XML Bursting shows incorrect values in email

We used bursting for sending out AR statements. We want to email the statements and ftp the same to another server for backup copies. When I have my delivery as just email, everything works as expected. When I add 'ftp' delivery in addition to 'email', I see strange behaviour.
If an element in XML is null, and this element is referenced in the email body/subject line, this element shows values from another element that has a value. For example, we have an element 'comment' which is referenced in subject of the email.
This 'comment' can be null, and when it is null, the value shows 'party_name'. Any ideas on why XML Bursting program would show values from other elements when the referenced element value is null? And this happens only when I have more than one 'delivery'.

Hi,
I am also facing a similar issue, I try to burst the xml file and email it to email address. for records with email address it works fine and when the email address is null, it has taken value from different records (though i don't see it against the respective XML group).
Did you get a chance to identify the issue?

Distributed Current Budget shows incorrect value in P6 EPPM 8.3

Hi All,
I am new to P6 EPPM and i would like to understand "How Distributed Current Budget value is calcluated".
Please find the below screen shot which shows the "Distributed current Budget" value is greater than total of Current Budget allocated for the projects.
Please help me.
Regards,
Ashok

Yes, I knew it automatically calculated columns.
Value of "Distributed Current Budget" while you stand at EPS node level = total of current budget for projects under this node.
The total of current budget for projects under Engineering & Construction node is not equal to Distributed current Budget in my screen shot.
Here only i need clarification and please find the screenshot for reference.

CpQuizInfoPointsscored, cpInfoPercentage and cpQuizInfoTotalCorrectAnswers showing incorrect values

Hi All,
I am using captivate 4 - AS2 for publishing. I have built a captivate quiz which is a very straight forward without any question pooling or randomization. All the quesions are standard MCSS/MCMS type and there is no custom activity. After the quiz there is standard scoring slide and after that I have added the certificate widget (captivates inbuilt widget).
The problem is the score being displayed on score page is correct however in certificate page it is something different. For this I tried tracking following variables on the score page:
$$cpQuizInfoPointsscored$$
$$cpQuizInfoTotalCorrectAnswers$$
$$cpInfoPercentage$$
The score being displayed is correct and system variable values are incorrect. Attached are a few screenshots for reference ($$cpQuizInfoPointsscored$$ and $$cpQuizInfoTotalCorrectAnswers$$ values are 50, 5 and 140, 14 which should have been 60, 6 and 190, 19 respectively).
Any pointers to what is wrong?
Thanks in advance!

Thanks for the reply.
No my captivate is the standard installation without any updates. Any pointers to that particular patch? from where I can install it?
I found this one:
http://www.adobe.com/support/captivate/captivate_4_downloads.html
Will this work?

FSRM and Quota's showing incorrect values

Hi,
I have set up folder quota's, and on one folder I have set it to 100GB. This Quota shows as 99% used, but the actual folder in Explorer shows only as 28GB used. What am I missing, or set up wrong, or is there a fix that needs to
be applied? (I don't think my maths is that bad as I am pretty sure 28 is not 99% of 100.)
Can anyone help or point me in the right direction.
Thanks!
Ben

I think I have a similar situation with my file cluster here, and this thread seems to be the closes I have found to what I'm seeing. For starters my file cluster servers up shares for my users, these shares are spread across 9 drives, and I have a folder
quota on the share of each drive. For example:
My username is jspatton, so my files are stored on
\\people\i\jspatton the physical drive on the server is the K: drive and the root folder is I (for users I - J). This folder is shared out, and this folder is where the quota is applied. I have it set at 640GB hard, and I have 80GB available to grow into
as needed. I think this is fairly common for most folks out there.
My problem started about 5 days ago when one of my disks dropped to under 1gb of free space. I have a script that runs on my file servers that emails me when a drive drops below a certain threshold. I received that email 5 days ago, followed by a notification
in SCOM that the disk was low. When I logon to the note the node and open Windows Explorer, I see that the free space is indeed under 1gb. When I use powershell to show me free-space I get a similar answer.
The odd thing for me is disk management. Down below in the graphical portion it's reporting the disk as 678GB NTFS which is accurate in an attempt to resolve the quota issue I set the quota to max space. But up above it's reporting something different.
V: 550gb (capacity) 830mb (free)
The disk is basic, and is in fact 678GB here is the info from fsrm which is also interesting..and maybe i'm just missing something.
Quota details V:
Limit 678GB (Hard)
Used 547GB (80%), Peak Usage: 547GB (80%) Peak Time 3:/16/2012 10:23PM
Available 131GB
Volume Details V:
Capacity 550GB
Hard quota allocation 678GB (123%)
available 477 MB
What have I done recently?
I increased the quota to equal the total space of the disk.
I disabled the quota and re-enabled it
On the file server I have emptied the recycle bin, but I don't really think that has an impact on those folders.
If anyone can shed some light I would be very grateful.
Thanks!
Jeffrey S. Patton Assistant Director of IT School of Engineering Computing Services University of Kansas 1520 West 15th Street Lawrence, KS. 66045-7621 | http://patton-tech.com

Remittance shows incorrect value

Hi
Quick question:
I paid out a dealer on SAP and DIC was completed successfully. The rpoblem is that when i check the remittance, i find that there was a lot of funds that were sutracted from the dealer.
Is there a reason why this is the case?
Please assist.
Thanking you in advance
Regards
KayGee.

Hi
In some cases the DIC completes but the amount does not show on the remittance while in some cases, tinstead of seeing the amount paid to the dealer, i see a large some of money when i print the remittance.
In FBL1N i can see the DIC amount but when i go to Websphere to print the remittance, i cant see this amount or i see a large amount of money.
Any idea what may be the reason for this?
Please assist
Regards
Kagiso

Excel attachment showing incorrect value

I have started seeing problems in any excel attachments in columns where dates are clearly being used and instead money is represented. This started happening after upgrading to IOS 6. I currently have an Iphone4. Thanks

I have been able to replicate this after it was brought to my attention today. Hope this is fixed..

Query is not showing the values - authentication error

Hi,
After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
Notification Number BRAIN 800
<b>Can u pls tell me the solution.</b>Thanks and Regards,
Giri.

Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter

Showing the Values as 0 in Sales Queries

Hi,
I configured Sales in my BI server with the help of SAP Best Practices.
In the initial steps while activating the Data Sources it has give me a warning message " R8281".
I neglected that warning and i completed the configuration.Now am trying to execute Incoming Order Query but it is showing the Values as 0 for all the Key Figures and Characteristics.
Not only for 1 query for all the querire it is showing the Values as 0.
Please guide me with a solution.
With Regards,
Praveen

Hi Savitha,
As it is a Preconfigured Solution given in SAP Best Practices,
These are the Steps i followed
1) Transferring Business Content DataSources
2) Logistics Extract Structures Customizing Cockpit
3) Deleting the Contents of the Setup Table
4) Performing Setup - SD Sales Orders
5) Performing Setup - LE Deliveries
6) Performing Setup - SD Billing Documents
7) Replicating DataSources from the SAP ERP System
8) Assigning Source System for Activation
9) Activating Business Content: InfoObject Catalogs
10) Loading Master Data Attributes/ Texts/Hierarchies
11) Activating Business Content: InfoCubes and
MultiProvider
12) Activating Business Content: Queries
13) Activating Business Content: Query Views
14) Maintaining DataStore Objects
15) Loading Transaction Data
So i created InfoPackages and i did all these steps.
But as per our discussion when i right click and select manage on Sales Overview Info Cube in RECONSTRUCTIONS tab i found most of the InfoPackages Load Status as Red.
I hope you two will guide me to get a solution.
Thanks and Regards,
Praveen

Query on virtual cube showing incorrect values

Similar Messages

Maybe you are looking for