Query or report
Hi all,
Does anyone know if there is an SAP report or a ad-hoc query that is capable of showing the number of despatches for a particular period and a matching figure for invoices relating to these (minus those with billing blocks)?
In theory you would expect the number of despatches to equal the number of invoices generated
thanks all
Hi,
Please try T-code VF04.
Select Delivery related documents and deselect no billing blocks.
Thanks,
Vrajesh
Similar Messages
-
Query to Report on Parallel Jobs Running
Morning!
I would like to get a query that reports on my parallel jobs.
For each minute that a procedure is running I would like to know what stages are running.
I log the whole procedure in a table called run_details and the start and end of each stage in a table called incident.
I'm running Oracle 9i
Here is some sample data based on 2 threads Expected output at the bottom
SQL>CREATE TABLE run_details
2 (run_details_key NUMBER(10)
3 ,start_time DATE
4 ,end_time DATE
5 ,description VARCHAR2(50)
6 );
SQL>CREATE TABLE incident
2 (run_details_key NUMBER(10)
3 ,stage VARCHAR2(20)
4 ,severity VARCHAR2(20)
5 ,time_stamp DATE
6 );
SQL>INSERT INTO run_details
2 VALUES (1
3 ,TO_DATE('08/10/2007 08:00','DD/MM/YYYY HH24:MI')
4 ,TO_DATE('08/10/2007 08:10','DD/MM/YYYY HH24:MI')
5 ,'Test'
6 );
SQL>INSERT INTO incident
2 VALUES (1
3 ,'Stage1'
4 ,'START'
5 ,TO_DATE('08/10/2007 08:00','DD/MM/YYYY HH24:MI')
6 );
SQL>INSERT INTO incident
2 VALUES (1
3 ,'Stage1'
4 ,'END'
5 ,TO_DATE('08/10/2007 08:08:53','DD/MM/YYYY HH24:MI:SS')
6 );
SQL>INSERT INTO incident
2 VALUES (1
3 ,'Stage2'
4 ,'START'
5 ,TO_DATE('08/10/2007 08:00','DD/MM/YYYY HH24:MI')
6 );
SQL>INSERT INTO incident
2 VALUES (1
3 ,'Stage2'
4 ,'END'
5 ,TO_DATE('08/10/2007 08:04:23','DD/MM/YYYY HH24:MI:SS')
6 );
SQL>INSERT INTO incident
2 VALUES (1
3 ,'Stage3'
4 ,'START'
5 ,TO_DATE('08/10/2007 08:04:24','DD/MM/YYYY HH24:MI:SS')
6 );
SQL>INSERT INTO incident
2 VALUES (1
3 ,'Stage3'
4 ,'END'
5 ,TO_DATE('08/10/2007 08:10','DD/MM/YYYY HH24:MI')
6 );
SQL>select * from incident;
RUN_DETAILS_KEY STAGE SEVERITY TIME_STAMP
1 Stage1 START 08/10/2007 08:00:00
1 Stage1 END 08/10/2007 08:08:53
1 Stage2 START 08/10/2007 08:00:00
1 Stage2 END 08/10/2007 08:04:23
1 Stage3 START 08/10/2007 08:04:24
1 Stage3 END 08/10/2007 08:10:00 So stages 1 and 2 run in parallel from 08:00, then at 08:04:23 stage 2 stops and a second later stage 3 starts.
set some variables
SQL>define start_time = null
SQL>col start_time new_value start_time
SQL>define end_time = null
SQL>col end_time new_value end_time
SQL>
SQL>SELECT start_time-(1/(24*60)) start_time
2 ,end_time
3 FROM run_details
4 WHERE run_details_key = 1;
START_TIME END_TIME
08/10/2007 07:59:00 08/10/2007 08:10:00Get every minute that the process is running for:
SQL>WITH t AS (SELECT TRUNC(TO_DATE('&start_time','dd/mm/yyyy hh24:mi:ss'),'MI') + rownum/24/60 tm
2 FROM dual
3 CONNECT BY ROWNUM <= (TO_DATE('&end_time','dd/mm/yyyy hh24:mi:ss')
4 -TO_DATE('&start_time','dd/mm/yyyy hh24:mi:ss')
5 )*24*60
6 )
7 SELECT tm
8 FROM t;
old 1: WITH t AS (SELECT TRUNC(TO_DATE('&start_time','dd/mm/yyyy hh24:mi:ss'),'MI') + rownum/24/60 tm
new 1: WITH t AS (SELECT TRUNC(TO_DATE('08/10/2007 07:59:00','dd/mm/yyyy hh24:mi:ss'),'MI') + rownum/24/60 tm
old 3: CONNECT BY ROWNUM <= (TO_DATE('&end_time','dd/mm/yyyy hh24:mi:ss')
new 3: CONNECT BY ROWNUM <= (TO_DATE('08/10/2007 08:10:00','dd/mm/yyyy hh24:mi:ss')
old 4: -TO_DATE('&start_time','dd/mm/yyyy hh24:mi:ss')
new 4: -TO_DATE('08/10/2007 07:59:00','dd/mm/yyyy hh24:mi:ss')
TM
08/10/2007 08:00:00
08/10/2007 08:01:00
08/10/2007 08:02:00
08/10/2007 08:03:00
08/10/2007 08:04:00
08/10/2007 08:05:00
08/10/2007 08:06:00
08/10/2007 08:07:00
08/10/2007 08:08:00
08/10/2007 08:09:00
08/10/2007 08:10:00
11 rows selected.Get stage, start & end times and duration
SQL>SELECT ai1.stage
2 ,ai1.time_stamp start_time
3 ,ai2.time_stamp end_time
4 ,SUBSTR(numtodsinterval(ai2.time_stamp-ai1.time_stamp, 'DAY'), 12, 8) duration
5 FROM dw2.incident ai1
6 JOIN dw2.incident ai2
7 ON ai1.run_details_key = ai2.run_details_key
8 AND ai1.stage = ai2.stage
9 WHERE ai1.severity = 'START'
10 AND ai2.severity = 'END'
11 AND ai1.run_details_key = 1
12 ORDER BY ai1.time_stamp
13 /
STAGE START_TIME END_TIME DURATION
Stage1 08/10/2007 08:00:00 08/10/2007 08:08:53 00:08:52
Stage2 08/10/2007 08:00:00 08/10/2007 08:04:23 00:04:22
Stage3 08/10/2007 08:04:24 08/10/2007 08:10:00 00:05:36Then combine both (or do something else) to get this:
TM THREAD_1 THREAD_2
08/10/2007 08:00:00 Stage1 Stage2
08/10/2007 08:01:00 Stage1 Stage2
08/10/2007 08:02:00 Stage1 Stage2
08/10/2007 08:03:00 Stage1 Stage2
08/10/2007 08:04:00 Stage1 Stage2
08/10/2007 08:05:00 Stage1 Stage3
08/10/2007 08:06:00 Stage1 Stage3
08/10/2007 08:07:00 Stage1 Stage3
08/10/2007 08:08:00 Stage1 Stage3
08/10/2007 08:09:00 Stage3
08/10/2007 08:10:00 Stage3Ideally I'd like this to work for n-threads, as I want this to run on different environments that have different numbers of CPUs.
Thank you for your time.> Ideally I'd like this to work for n-threads, as I want this to run on
different environments that have different numbers of CPUs.
The number of CPUs are not always a good indication of the processing load that a platform can take - especially when the processing load involves a lot of I/O.
You can have 99% CPU idle time with a 1000 active processes... as that idle time is in fact CPU time spend waiting on I/O completion. Courtesy of a severely strained I/O channel that is the bottleneck.
Another factor is memory (resources). You for example have 4 CPUs with 8GB physical memory.. where a single process (typically a Java VM for a complex process) grabs a huge amount of memory. Assuming that 4 threads/CPU or 1 threads/CPU can be a severe overestimate due to the amount of memory needed. Getting this wrong leads in turn to excessive virtual memory paging and reduces the platform's performance drastically.
CPU alone is a very poor choice when deciding on the platform's capacity to run parallel processes. -
Is there a simple way to refresh a SQL Query (Updatable report) region
I have a page in APex 4.1 that has many regions. I would like to be able to refresh a single region.
Currently, I have the following
Region (sql query updateable report).
STATIC ID = LANDINGS
in the region footer, I have:
<script type="text/javascript">
$s('P110_LANDINGS_REGION_ID','#REGION_STATIC_ID#');
</script>
P110_LANDINGS_REGION_ID is a hidden field.
I use javascript to refresh....but it does not seem to be working. Previously, we had hard-coded the region id ( $a_report('1363338167540162011','1','100','100');) ...but that ID was somehow corrupted, which has lead me to the 'OMG...there must be an easier way!' lament.
the javascript is:
$a_report('P110_LANDINGS_REGION_ID','1','100','100');
thanks!
Karen
ps. could I just directly reference the static id in my javascript...
$a_report('LANDINGS','1','100','100');Karen,
First off: please post code in {code}...{code} tags!
function AddFavoriteSpecies()
get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=favorite_species_collection',0);
gReturn = get.get();
rowCount = rowCount + parseInt(gReturn);
pHMS_add = '&G_HMS_FLAG.';
$a_report('1363338167540162011','1','100','100');
//$a_report($x('P110_LANDINGS_ID').value,'1','15','15');the statement:
$a_report('1363338167540162011','1','100','100'); works, but the statement $a_report($x('P110_LANDINGS_ID').value,'1','15','15'); does not.
Can anyone help.
I am assigning the page field P110_LANDINGS_ID in the footer of a region with a static id = LANDINGS.
<script type="text/javascript">
$s('P110_LANDINGS_ID','#REGION_STATIC_ID#');
</script>
Well, let's start by dumping $a_report. This is undocumented code, and it has long been replaced by triggering a refresh.
Next, don't use $x(pNode).value to retrieve a value. Rather use $v(pNode) to do this.
function AddFavoriteSpecies()
get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=favorite_species_collection',0);
gReturn = get.get();
rowCount = rowCount + parseInt(gReturn);
pHMS_add = '&G_HMS_FLAG.';
//get the region id from the item
//use it in a jQuery selector to get the region
//trigger the refresh event on this object
$("#" + $v('P110_LANDINGS_ID')).trigger('apexrefresh');
}Now if you want to make sure that P110_LANDINGS_ID contains a value, add an alert with its value before you use it.
alert('P110_LANDINGS_ID value: '+$v('P110_LANDINGS_ID')) -
SQL Query (updateable report) Region - Conditionally Hide and Set Values
SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
contract_id,
CASE WHEN hardware_id IS NOT NULL THEN
'HA'
WHEN backup_dev_id IS NOT NULL THEN
'BD'
WHEN hardware_os_id IS NOT NULL THEN
'HS'
END item_type,
hardware_id,
backup_dev_id,
hardware_os_id
FROM "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID NUMBER NOT NULL,
CONTRACT_ID NUMBER NOT NULL,
HARDWARE_ID NUMBER,
BACKUP_DEV_ID NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
( hardware_id IS NOT NULL
AND backup_dev_id IS NULL
AND hardware_os_id IS NULL
OR ( hardware_id IS NULL
AND backup_dev_id IS NOT NULL
AND hardware_os_id IS NULL
OR ( hardware_id IS NULL
AND backup_dev_id IS NULL
AND hardware_os_id IS NOT NULL
) Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value Return Value
Hardware Asset HA
Backup Device BD
Computer System HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far... -
Add subquery to main query in Report Builder 6i
Usually, when you add a subquery to an existing query in a report, you'll see the query in data model marked by a paper clip icon with a forward slash across it (means "Subquery Inside"). All current field names in current query (except CF and CS) will have a '1' appended after it (CF and CS fields are not affected), but in your sql, the column names stay the same. So there is an out-of-sync situation with the column names.
To fix this:
1) before change anything, back up old report somewhere else
2) copy the original query somewhere else as backup
3) open the query in Report Builder
4) wipe out the query, replace it by "select 1 from dual" to reset it and press ok.
5) replace "select 1 from dual" with your new query with an embedded subquery.
6) All field names will be without the '1' appendix.
7) check all the CS fields, the source should be reset to null. Redefine the CS fields using backed up report as reference. CF fields are not affected.
8) move the fields and restore the break orders according to backed up report.
9) Recompile whole report.
10) save report again and you're done.
Maybe you don't need this in the latest version of Report Builder, but in 6i, this is what I do.If you use aliases for your item names in your original query you avoid this problem....
eg
Select field1 item1, field2 item2 from table.....
item 1 and item2 will stay in your layout between query changes.
D -
Get a insert session value for SQL query at report
Hi friends
I created a global temp table and procedure to support web search form.
and a search result report. The procudure
gets search result from multip tables and
insert into temp table --recordsearch. I can get value from temp table by call procedure
at SQL*Plus.
However, I can not get this value by web report.
How can I get this insert session value and pass to SQL query for report?
Thanks,
Newweb
CREATE GLOBAL TEMPORARY TABLE recordsearch
(emp_id VARCHAR2(200),
ssn VARCHAR2(9),
fname VARCHAR2(200),
lname VARCHAR2(200),
m_name VARCHAR2(200)
) ON COMMIT PRESERVE ROWS;it possible that your web form does not have a persistent, dedicated connection. if you have connection pooling for example, multiple sessions will see the same instance of the GTT, so if one deletes it, then nobody sees it (or you can see others data). if the connections are not persistent, then they can disconnect between calls, deleting the GTT table.
-
How to define the PLD of a Query generator report
Hi All,
I want to define the PLD of a Query Report. Currently I am Convertning it to Excel format. But my client wants it in PLD format. so please tell me the process of defining the PLD for a Query generator Report.
Thanks & Regards
Pankaj Sharma.Hi,
When u wrote yr query at that time save yr query
Now yr query is save in "Query Manager"
Open Query Manager > select yr query
There is a button "Create Report"
Create USer Report Window is display "define yr name" and select "Base Temple"
once u save it double click and edit yr PLD....
Hope it a best way to create uer PLD
Thanks
Kevin -
Update Field On Change For A SQL Query (updateable report)
Hi,
I'd like to request help from anyone with ideas on how to solve this.
We are using APEX 4.2, 10GR2, RedHat5.
I have a report that comes from SQL Query (updateable report).
I'm using the apex_item.text and apex_item.hidden on fields.
I'm using a button to submit and after submit process to add some logic that I need.
There could be 1 - 10 records in the report.
There is only 1 field that is needed to enter a value, but the value of this field determines the value of another field.
I think that I can do this with a submit button and an after submit process where I loop through all the records. I think I have this handled.
This is the question
When the value of that field is changed then the value of another field in the same row changes immediately.
Is this possible?
All the examples I've seen so far are for a single record and that doesn't work for us.
I guess this is a MRU process but I haven't seen an example where a dynamic action is possible on a Multi Row Update.
Could anyone direct me to where I can see an example or help me get directions?
I appreciate all your help an comments and I thank you in advance.Yes why not...what you looking for is a ajax call
See {message:id=10390979}
Please note:-you can also do this as a dynamic action as shown below
Event: Change
Selection type: jQuery Selector
jQuery Selector: input[name="f01"]
True action with Execute JavaScript Code and put all code inside the test funtion, you may need to amend the code to use this.triggeringElemnt in place of this -
0ADHOC error while executing the query from Report Designer
Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVRHi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine -
5200: Error executing query: in report (Workspace - Hyp Financial Report)
I tried to open a report in the workspace and this error appeared only in an environment in other open properly, the reports are the same.
Appears Only "5200: Error executing query: in report"
What can I do?The below link may be provide some insight:
5200: Error executing query: Invalid Item ID. Pls help
Also check log file for details about the error you are getting so as to get more information. -
Sql query in report/source
Is possible use this kind of select select a,(select b from b) from b
in sql query in report/source?Pretty much any valid select statement can be used.
If it works in SQL*Plus, then it should work in Application Express.
I think your example would not be valid if table b has more than one row.
A scalar subquery (like your "select b from b") must only return a single value.
SQL> select ename, (select job from emp) from emp e;
ORA-01427: single-row subquery returns more than one rowIf your subquery can be restricted to return one value, then it should work.
SQL> select ename, (select job from emp where empno = e.empno) job from emp e;
ENAME JOB
KING PRESIDENT
BLAKE MANAGER
CLARK MANAGER
JONES MANAGER
SCOTT ANALYST
FORD ANALYST
SMITH CLERK
ALLEN SALESMAN
WARD SALESMAN
MARTIN SALESMAN
TURNER SALESMAN
ADAMS CLERK
JAMES CLERK
MILLER CLERK
14 rows selectedBut is that the kind of result you were looking for? -
SQL Query (updateable report) - Can't figure out how to make one
Hi folks,
Can someone tell me how to make a report where the data can be updated? Not an interactive report, a SQL report that selects only one row. The only options in the drop down I see are "SQL Query" and "SQL Query (PL/SQL function body returning SQL query)", but I have a report elsewhere that says it's type is "SQL Query (updateable report)", but I can't remember how to do it :(
Thanks very much,
-AdamHi Adam,
An Updatable Report is a "Tabular Form" - see: http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/frm_tabular.htm#CHDFBHDB
Andy -
How to add a parameter to sql query in report
Hi
How to add a parameter to sql query in report.
Parameter is from Visual studio
example:
select * from tab1 where dl=parameter???
I have VS 2008 prof CR XI R2, mysqlHello,
If you have this API available then you can modify the record selection formulae in code to add filtering:
string recordSelectionFormula = "{T_INV_RPT_ADDR.IND_PROMUS} = {?P_PROMUS?} AND {T_INV_RPT_POINT.INVOICE_DATE} = DATE(2008, 05, 31) AND {T_INV_RPT_POINT.CHECKOUT_DATE} = date(2008, 04,29)";
CrystalDecisions.CrystalReports.Engine.ReportDocument.RecordSelectionFormula = recordSelectionFormula;
You have to format and follow the rules as in the Designer so not too much work to get this to work.
CR for .NET may not have the ability so you will need to upgrade to a Developer version of Crystal Reports.
Thank you
Don -
Error when trying to use this query in report region
Hi ,
I am getting "1 error has occurred
Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the ''generic columns'' checkbox below the region source to proceed without parsing. ORA-00933: SQL command not properly ended"
while trying to use this query in reports region .
Pls help.
Thanks ,
Madhuri
declare
x varchar2(32000);
begin
x := q'!select (first_name||' '|| last_name)a ,
count(distinct(session_id)),manager_name
from cappap_log,
MIS_CDR_HR_EMPLOYEES_MV
where DECODE(instr(upper(userid),'@ORACLE.COM',1),0,upper(userid)||'@ORACLE.COM',upper(userid)) = upper(email_address)!';
if :P1_ALL = 'N' then
x:= x||q'!and initcap(first_name ||' '|| last_name)=:P1_USERNAME!';
else
x:= x||q'!and initcap(first_name ||' '|| last_name)like '%'|| :P1_USERNAME||'%'!';
end if;
if :P1_APP_NAME = '%' then
x:= x||q'! and flow_id like '%'!';
else
x:= x||'flow_id = :P1_APP_NAME';
end if;
x:= x||q'! group by first_name||' '|| last_name , manager_name!';
return x;
end;Hi, I am actually stuck here. Can you please let me know which among these is the higher version.
1) Final Release 3.50
Version 3500.3.016
2) Final Release 3.50
Version (Revision 481)
Because it is working fine in the 1st one whereas its throwing that error pop-up in 2nd one(as soon as we select the Change query global definition option) . -
Create a validation for SQL Query (updateable report)
Hello
I have a need for creating a validation on a SQL Query (updateable report)- type region
1)
When a row get populated i don't want same values to be populated in the second row.(as shown in first 2 rows)
Also, I don't want to have a value that falls in range in between 100 and 1000 for the period falls in the previous. (as shown in third row)
i.e
Type_id
Lower_Limit Upper_Limit Date_From Date _To
1
100 1000 1/1/2013 12/31/2013
2
100 1000 1/1/2013 12/31/2013
3
101 500 2/1/2013 10/31/2013
appreciate any help
thanks
kpThis example could help:
http://apex.oracle.com/pls/otn/f?p=31517:214
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
APEX 4.1, SQL Query(Updateable report), Validation issue.
Hi,
I am using APEX 4.1.
I have SQL Query(Updateable report), we have created validation for the columns in this report.
The validations are working properly only for the first row of the report on submitting, the remaining rows are not getting validated.
If we check mark the rows it will get validated, but we want the validation to happen without checkmarking, on all the rows on clicking submit button.
Can someone help me to fix this issue?
Thanks in advance.
Thanks & regards,
Ravi.Hi Ravi,
Welcome to Oracle Forums!
Please acquaint yourself with the FAQ and forum etiquette if you haven't already done so.
Always state
<ul>
<li>Apex Version</li>
<li>DB Version and edition</li>
<li>Web server used.I.e. EPG, OHS, ApexListner Standalone or with J2EE container</li>
<li>When asking about forms always state tabular form if it is a tabular form</li>
<li>When asking about reports always state Classic / IR</li>
<li>Always post code snippets enclosed in a pair of {code} tags as explained in FAQ</li>
</ul>
I am using APEX 4.1.I have SQL Query(Updateable report), we have created validation for the columns in this report.
The validations are working properly only for the first row of the report on submitting, the remaining rows are not getting validated.
If we check mark the rows it will get validated, but we want the validation to happen without checkmarking, on all the rows on clicking submit button.
Can someone help me to fix this issue?
>
Post your validation code with some explanations of what the g_fnn are.
Cheers,
Maybe you are looking for
-
OK I want to connect my new IMac to my TV. I know I need an apple mini-DVI to DIV adapter and a DVI to HDMI cable. Questions: 1) Is the DVI end of the mini-DVI to DVI adapter male or female? 2) is it a DVI-D format? A good image of the DVI end of thi
-
How to create table maintenance generator?
Dear Sir/Madam, when i am creating table maintenance generator , it asks for function group i give 0MB8 , it says u r going to change function group which does not belongs to u, then i created a function group yfg9 and given , it then says yfg9
-
How to export data to an excel by preserving styles
Hi All, I am trying to export data to an excel using ColdFusion. Below is my code. <cfheader name="content-disposition" value="attachment; filename=dashboard.xls"> <cfcontent type="application/msexcel"> <table width="200" border="1"> <tr> <td w
-
Is it possible to install PVM without DHCP in local network?
Hi! We have main DHCP server in our company and i don't have access to it. So, it's difficult to install PVM from Network or i don't understand how to do in. I created kickstart file and shared OEL DVD, also i configured VM as: uuid = '0004fb00-0006-
-
Hi all, Am I right assuming that the execution of start method (start/exec) takes place after all dependencies of an instance have been resolved ? TIA oliver