Query - Parameter Order

I have a infoset (sq02) with a query ( sq01)....
I can order the fields in the final list on the "modify infoset" in SQ01.
But where can I order the fields of the parameters when you execute the query and you write the parameters that you want to filter? I modify the orden in SQ01 ( excatly the same with the orders of the list), but it didnt save it.
Have I explain ok?

Go into change mode and choose from the menu, Go To, Field Selection, Selections. here you set the number as to the order of the selection fields on the selection screen. Save and run the query.
Regards,
Rich Heilman

Similar Messages

How do I clear query parameter in Oracle 10g ADF

HI ,
My question is
1. when i am navigating to page B from Page A its querying data and showing . And I have same Pgae B which is attached to Menu also
so . How do i trace whether I am comming from menu or comming from Page A ..??
2. if i moved to page A and searched with some criteria , after then I moved to Page B from Menu , again come back to Page A from Menu
its retaining the old search criteria in the page . not clearing my search criteria . ( as a result what is happening its not showing the data whatever
in the Table ) . In order to show my existing data , i need to clear and then again clicking page B in Menu then only its showing the data .
so how to clear query parameter

[email protected] wrote:
HI ,
My question is
1. when i am navigating to page B from Page A its querying data and showing . And I have same Pgae B which is attached to Menu also
so . How do i trace whether I am comming from menu or comming from Page A ..??Add a setActionListner and set a sessionscope variable according to the action?
>
2. if i moved to page A and searched with some criteria , after then I moved to Page B from Menu , again come back to Page A from Menu
its retaining the old search criteria in the page . not clearing my search criteria . ( as a result what is happening its not showing the data whatever
in the Table ) . In order to show my existing data , i need to clear and then again clicking page B in Menu then only its showing the data .
so how to clear query parameter

Expdp error with query parameter

i am trying to use datapump and using query parameter in there as below...
but when i use the below, its exporting some system "repcat$" tables and
nothing realted to scott.audit table or anything realted to my query where
clause...what am i doing wrong ??
expdp system
DUMPFILE=test.dmp
LOGFILE=test.log
DIRECTORY=DATA_PUMP_DIR
TABLES=SCOTT.AUDIT
QUERY=SCOTT.AUDIT:'"WHERE TRUNC (audit.audit_timestamp)
BETWEEN TO_DATE ('01012008','DDMMYYYY') AND TO_DATE ('13012008','DDMMYYYY')"'
also when i use scott instead of system user i get below error
Export: Release 10.2.0.3.0 - 64bit Production on Wednesday, 22 July, 2009 12:53:45
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-39145: directory object parameter must be specified and non-null

i treid again, but creating a new datapump dir as follows...create or replace dir dpdump as '/backup/dpdump/orcl';
then gave grant read,write on directory dpdump to system
and now why is oracle looking at a differnt location ?? even when i changed the
direcotry ???
$ expdp SYSTEM
DUMPFILE=test.dmp
LOGFILE=test.log
DIRECTORY=DPDUMP
QUERY=SCOTT.AUDIT:'"WHERE TRUNC (audit.audit_timestamp)
BETWEEN TO_DATE ('01012008','DDMMYYYY') AND TO_DATE ('13012008','DDMMYYYY')"'
Export: Release 10.2.0.3.0 - 64bit Production on Wednesday, 22 July, 2009 13:27:18
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/oracle/app/oracle/product/10.2.0/admin/orcl/dpdump/expdat.dmp"
ORA-27038: created file already exists
Additional information: 1
$>
Seems little weird but can you:--
1. Drop the dpdump directory.
SQL> drop directory dpdump;
2. recreate it and then grant the permissions.
SQL> create directory dpdump as '/backup/dpdump/orcl';
The folders must exists in the location.
SQL> grant read,write on directory dpdump to system;
3. SELECT directory_name, grantee, privilege
FROM user_tab_privs t, all_directories d
WHERE t.table_name(+)=d.directory_name
ORDER BY 1,2,3;
Anand

SOAP web service: query parameter?

Hi guys,
I'm a newbie when it comes to web services and I've hit a problem that I didn't expect. I've exposed several SOAP services using the JAX-WS and WebLogic which are working fine. I've tried implementing an access key security mechanism such as Amazon does by adding a filter in front of the service's handling servlet to check for an access key sent as an HTTP query parameter. So basically, the service that was exposed at the following URL:
http://localhost/company/service
must now be accessed using the following URL:
http://localhost/company/service?accessKey=123
The filter checks the accessKey parameter and short-circuits the request if the wrong access key is sent.
While this approach works well with JAX-RS web services, it doesn't seem to be working as well with JAX-WS web services: adding the parameter makes WebLogic return a 404 error instead of processing the request. I'm convinced I've seen web services being called with query parameters and that this can be done, but I don't see how. Any ideas anyone?
Cheers!

It seems that the servlet generated by Workshop doesn't handle extra parameters too well. I've managed to get it working by tweaking the filter so that it lets WSDL retrieval requests pass through but still filters the other requests. Everything is working fine.

SSRS countrow Aggregate error(Aggregate and lookup functions cannot be used in query parameter expressions.)

Below expression works fine with text box but gives error in dataset expression.
="SET FMTONLY OFF select "+ join(Parameters!Column.Value,",") +" FROM pamcustom.dbo.vw_HFL_HFD_HotfileData INNER JOIN pamcustom.dbo.HFL_HFB_HotFileBatch on BatchID = HFB_intBatchID where BatchID ="+Parameters!BatchId.Value+"
and "+Parameters!cmbTranType.Value+" "+ iif(CountRows("DS_Aml_Mnr_Iss_Desc")=Parameters!Mnr_Iss_Desc.count," "," and aml_mnr_iss_desc in "+"('" & join(Parameters!Mnr_Iss_Desc.Value,"','")
& "')")+iif(CountRows("ds_ReportingCategory")=Parameters!ReportingCategory.count," "," and ReportingCategory in "+"('" & join(Parameters!ReportingCategory.Value,"','") & "')")+iif(CountRows("ds_NAICSubGroup")=Parameters!NAICSubGroup.count,"
"," and naicsubgroup in "+"('" & join(Parameters!NAICSubGroup.Value,"','") & "')")+iif(CountRows("ds_PortTrading")=Parameters!PortTrading.count," "," and porttrading in "+"('"
& join(Parameters!PortTrading.Value,"','") & "')")+iif(CountRows("ds_GL_LE")=Parameters!GL_LE.count," "," and gl_le in "+"('" & join(Parameters!GL_LE.Value,"','") &
"')")+iif(CountRows("ds_coagroup")=Parameters!cmbCoaGrp.count," "," and coagroup in "+"('" & join(Parameters!cmbCoaGrp.Value,"','") & "')")+iif(CountRows("Portfolio")=Parameters!cmbPort.count,"
"," and portfolio in "+"('" & join(Parameters!cmbPort.Value,"','") & "')")+IIf(IsNothing(Parameters!txtSecID.Value)," "," and secid in ('"+Replace(Parameters!txtSecID.Value,",","','")+"')")+iif(IsNothing(Parameters!minPortFilter.Value)
and IsNothing(Parameters!MinPort.Value)," "," and portfolio "+Parameters!minPortFilter.Value+Parameters!MinPort.Value)+iif(IsNothing(Parameters!maxPortFilter.Value) and IsNothing(Parameters!MaxPort.Value)," ","
and portfolio "+Parameters!maxPortFilter.Value+Parameters!MaxPort.Value)+iif(IsNothing(Parameters!minCoaFilter.Value) and IsNothing(Parameters!txtMinCoa.Value)," "," and portfolio "+Parameters!minCoaFilter.Value+Parameters!txtMinCoa.Value)+iif(IsNothing(Parameters!maxCoaFilter.Value)
and IsNothing(Parameters!txtMaxCoa.Value)," "," and portfolio "+Parameters!maxCoaFilter.Value+Parameters!txtMaxCoa.Value)
I guess the error " Aggregate and lookup functions cannot be used in query parameter expressions." is because I am using CountRow to ensure that if all values of multi select all selected i will not use that filter in where clause.
Pls. guide...

Hi, Include your parameter total count in the dataset for parameter and instead of using countrows() function use the count from dataset in the expression.
Hope this helps.........
Ione

Passing query parameter through xcelsius 2011 at run time

I am using reporting service as a web connectivity and I am trying to pass the query parameter at run time from the dashboard. While executing the xcelsius at first time it is working well with the default value but after passing the parameter from combo box, the data is not loading. It is not returning anything except the field name.
I am new to this xcelsius. Your help will be really appreciated.
Thanks.

Hi,
if you do the following thing,i think it may be helpfull,
First select Data in menubar>Connection->select required connection>select the useage option in connection definition window>give trigger cell value as combo box destination cell.
Thanks,
Ramana

Issue in query my order in Order Management

Hi,
I customized the OM module to give credit card information in third party site, for that i assigned dummy values for credit card and card holder name etc in the OM. to open third party site. Now my issue is if i query my order in OM dummy values is dispalyed instead of values given in third party window.
I check the following API's IBY_FNDCPT_SETUP_PUB, IBY_INSTRREG_PUB and IBY_CREDITCARD_PKG.
Istore
I got entries in the IBY_FNDCPT_SETUP_PUB for my istore new card order. Now my issue is if i query that order in the OM my credit card no,card holder name expiration date not displayed instead of dummy values which i assigned is displaying but the details are updated in the lov for that order.
If i do authorization for existing credit card in istore. And query my order in the OM my credit card no,card holder name expiration date are displaying correctly. Now i need solution to fix the problem so help me to fix it.
Regards
Khan

Maybe you can try to reset QueryModel, something like this:
QueryModel queryModel = queryComponent.getModel();
QueryDescriptor queryDescriptor = queryComponent.getValue();
queryModel.reset(queryDescriptor);
queryComponent.refresh(FacesContext.getCurrentInstance());
AdfFacesContext.getCurrentInstance().addPartialTarget(queryComponent);Sorry, I don't have any more ideas :(
Dario

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query parameter to report parameter i need to pass distinct values. How can i resolve this

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve this

Hi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Oracle 10g exp error with query parameter

Hi all,
I am trying to perform an export but getting this error when using the query parameter. I think it's a syntax problem but not sure where.
I'm in a dos prompt
E:\>exp file=xxxxx.dmp log=xxxx.log tables=xxxxx query='where responseid not in (select responseid from aaaa_bbbbb)';
LRM-00112: multiple values not allowed for parameter 'query'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
Thx

This is why I love this forum so much.
I've probably done thousands of exports and never used the query parameter.
Here's something that will help you. Please read and note the requirement to escape, or protect, special characters and such.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm
exp scott/tiger TABLES=emp QUERY=\"WHERE job=\'SALESMAN\' and sal \<1600\"ji li

Export using a QUERY parameter

I am trying to export a subset of data using the following parms:
FILE=C:\EXPORT\ADM_ACCESS_LOG.DMP
GRANTS=Y
INDEXES=Y
DIRECT=N
ROWS=Y
CONSISTENT=N
TRIGGERS=Y
CONSTRAINTS=Y
FEEDBACK=1000
TABLES=(THRESHER.ADM_ACCESS_LOG)
QUERY=\"WHERE LOGIN_DT='31-JUL-2005'\"
The table exists as does the column, however, I get the following error:
LRM-00101: unknown parameter name 'LOGIN_DT'
I have everything spelled correctly and I am logging into export as thresher.
What am I doing wrong?
Thanks

use the query parameter like this
QUERY="WHERE to_char(dte,'mm/dd/yyyy')='07/31/2005'"
or
QUERY="WHERE to_char(dte,'dd-mon-yyyy')='31-JUL-2005'"
--thedba

Query parameter question

Hi
What are the diffrence of the query parameter in following format:
select * from table_a where row_id=?id
select * from table_a where row_id=:id
select * from table_a where row_id=&idThe 1st and 2nd works if I use them as named query from Java (Toplink)
The 2nd and the 3rd works when I use them from SQL developer. SQL developer will pop up parameter window. but the window looks diffrent with each parameter format.
What are the diffrences?
Thanks

>
select * from table_a where row_id=?idMust be a Java thing, not SQL or PL/SQL
select * from table_a where row_id=:idThis is a bindvariable
select * from table_a where row_id=&idThis is a substitution variable
Edited by: Alex Nuijten on Jun 17, 2009 5:33 PM
Edited by: Alex Nuijten on Jun 17, 2009 5:34 PM

Using IN Operator in Query Parameter querying an Oracle dataset

I have created a main data set querying from Oracle in which I have two query parameters that are multi-valued lists. I created a data set for each of those multi-valued lists. These two parameters are configured to be multi-valued and selected
from the query. On the main data set, the parameters are set to an expression: = Join(Parameter.Field.Value, ","). If I sent just one value as a default in each of those parameters, works great. If I select "Select All"
in my drop down and rerun the report then I get "Query execution failed for dataset" and "rsErrorExecutingCommand". I am using Report Builder 3.0. I have seen some older posts saying you have to use a stored procedure to generate
a string from the selects to be passed to the parameter? I don't get this. Obviously I want to stick with using a query parameter for the performance gain. Is there an easy way to make this work?
Grateful for any help! Laurie

Laurie, you are right that the execution time is too long. Your instinct is correct to put the burden on the database to return the correct resultset, rather than filtering it in the report.
I think I wasn't clear about my explanation and you may have made this more complicated than it needs to be. The functionality that you want is already in ReportBuilder. Please check out this example from MS:
http://technet.microsoft.com/en-us/library/aa337396(v=sql.105).aspx
This is the correct syntax:
AND soh.SalesPersonID IN (@BusinessPersonID)
Is this how you have your query configured? If not, could you supply an example.
Hope that helps,
Mark

Problem in using query parameter in exp(9.2)

Hi Folks,
I'm not able to take export from a table with query option on a Solaris machine. here is my parameter file which has query parameter in it. I'm also posting error message.
file=utf_exp_raw_citation.dmp
log=utf_exp_raw_citation.log
owner=utf8admin
statistics=none
tables=raw_citation
query=\"where nvl(source,'AAA') in ('EMC','HMD','HSR','KIE','NASA','PIP','AAA')"\
rows=y
Error:-*
$ exp utf8admin/[email protected] parfile=exp_raw_citation_07_01_2011_new.dat
LRM-00116: syntax error at ')' following 'AAA'
LRM-00113: error when processing file 'exp_raw_citation_07_01_2011_new.dat'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
Please help me in this.
regards
Krishna Prasad Donepudi

I suggest you utilize a parameter file to avoid the shell messing with metacharacters on command line

Query with order by clause

Hi,
I found a query with order by clause in procedure which is taking long time.
Stats are upto date.
Total Rows :650000.
It is ordered by primary key column.
select * from table_name order by col1;
col1 is a primary key.No of cpu's used is 4.
can anyone suggest me a better solution to improve the performance of a query.
Is it better to use parallel hint for above scenario.
Any help really apprecaited.
Thanks in advance.

Hi,
Thanks for ur immediate reply.
It doesn't have where clause.
below is the plan
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 619071987
| Id | Operation                   | Name                 | Rows | Bytes | Cos
|   0 | SELECT STATEMENT            |                      |   671K|   255M| 125
|   1 | TABLE ACCESS BY INDEX ROWID| FULL_ITEM_FACILITIES |   671K|   255M| 125
|   2 |   INDEX FULL SCAN           | FIF_PK               |   671K|       |
9 rows selected
Executed in 0.094 secondsThanks in advance
Edited by: unique on Jun 22, 2009 8:26 AM

Query - Parameter Order

Similar Messages

Maybe you are looking for