Query parameter problem
I'm using the value selected in a dropdown list (20 separate values) as the where clause in a query to populate a table:
dataElementsTableModel.setObject(1, xactionDropdown.getValue());
dataElementsTableModel.execute();
This works OK for most of the values in the dropdown list, but not all of them. If I cut and paste the table query from Creator to SQL*Plus and run it with any of the list values, the query returns the correct number of rows. Has anyone else run into this problem, and maybe has a solution?
I noticed that when the data table is empty after selecting one of the values from the dropdown list, the table WILL BE populated if I refresh the page with F5. The behaviour is consistent, i.e., it's always the same dropdown values which cause or don't cause the data table to be populated.
Similar Messages
-
Problem in using query parameter in exp(9.2)
Hi Folks,
I'm not able to take export from a table with query option on a Solaris machine. here is my parameter file which has query parameter in it. I'm also posting error message.
file=utf_exp_raw_citation.dmp
log=utf_exp_raw_citation.log
owner=utf8admin
statistics=none
tables=raw_citation
query=\"where nvl(source,'AAA') in ('EMC','HMD','HSR','KIE','NASA','PIP','AAA')"\
rows=y
Error:-*
$ exp utf8admin/[email protected] parfile=exp_raw_citation_07_01_2011_new.dat
LRM-00116: syntax error at ')' following 'AAA'
LRM-00113: error when processing file 'exp_raw_citation_07_01_2011_new.dat'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
Please help me in this.
regards
Krishna Prasad DonepudiI suggest you utilize a parameter file to avoid the shell messing with metacharacters on command line
-
SOAP web service: query parameter?
Hi guys,
I'm a newbie when it comes to web services and I've hit a problem that I didn't expect. I've exposed several SOAP services using the JAX-WS and WebLogic which are working fine. I've tried implementing an access key security mechanism such as Amazon does by adding a filter in front of the service's handling servlet to check for an access key sent as an HTTP query parameter. So basically, the service that was exposed at the following URL:
http://localhost/company/service
must now be accessed using the following URL:
http://localhost/company/service?accessKey=123
The filter checks the accessKey parameter and short-circuits the request if the wrong access key is sent.
While this approach works well with JAX-RS web services, it doesn't seem to be working as well with JAX-WS web services: adding the parameter makes WebLogic return a 404 error instead of processing the request. I'm convinced I've seen web services being called with query parameters and that this can be done, but I don't see how. Any ideas anyone?
Cheers!It seems that the servlet generated by Workshop doesn't handle extra parameters too well. I've managed to get it working by tweaking the filter so that it lets WSDL retrieval requests pass through but still filters the other requests. Everything is working fine.
-
Oracle 10g exp error with query parameter
Hi all,
I am trying to perform an export but getting this error when using the query parameter. I think it's a syntax problem but not sure where.
I'm in a dos prompt
E:\>exp file=xxxxx.dmp log=xxxx.log tables=xxxxx query='where responseid not in (select responseid from aaaa_bbbbb)';
LRM-00112: multiple values not allowed for parameter 'query'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
ThxThis is why I love this forum so much.
I've probably done thousands of exports and never used the query parameter.
Here's something that will help you. Please read and note the requirement to escape, or protect, special characters and such.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm
exp scott/tiger TABLES=emp QUERY=\"WHERE job=\'SALESMAN\' and sal \<1600\"ji li -
Query parameter with selectOneChoice in panelFormLayout
hello all :)
i got problem, how to make query parameter with selectOneChoice in panelFormLayout, anyone help me... :(
helep gan.....helep
thx
agungdmtHi Frank... :), thx for your response
i have try your solution, but still not work. in this case i'm still confuse with using parameter (bind variable with view criteria) in join table
in this below, query in my project (generate at create view object)
--- [Query] ------
SELECT WhLokasi.LOKASI_ID,
WhLokasi.BARIS_KE,
WhLokasi.DESKRIPSI,
WhLokasi.KOLOM_KE,
WhLokasi.SUBKOLOM_KE,
WhRak.RAK_ID,
WhRak.NAMA,
WhWarehouse.WAREHOUSE_ID,
WhWarehouse.NAMA AS NAMA1
FROM WH_LOKASI WhLokasi, WH_RAK WhRak, WH_WAREHOUSE WhWarehouse
WHERE (WhLokasi.RAK_ID = WhRak.RAK_ID) AND (WhRak.WAREHOUSE_ID = WhWarehouse.WAREHOUSE_ID)
------ [Bind variable] --------
baris : String
kolom : String
subkolom : String
namarak : String
namagudangv : String
------ [View Creiteria] -------
( (WhLokasi.BARIS_KE = :baris ) AND (WhLokasi.KOLOM_KE = :kolom ) AND (WhLokasi.SUBKOLOM_KE = :subkolom ) AND (UPPER(WhRak.NAMA) LIKE UPPER( :namarak || '%') ) AND (UPPER(WhWarehouse.NAMA) LIKE UPPER( :namagudang || '%') ) )
need help gan... :)
thx
agungdmt
Edited by: agungdmt on Dec 16, 2010 6:42 PM -
I am trying to export some data using the query clause. I am getting this error "LRM-00116: syntax error at ')' following 'mm/dd/yyyy'
my query clause is :
QUERY = \"where TREND_DATE \> to_date('01/01/2006','mm/dd/yyyy') \"
Can anyone help me with what the problem is.
Thanks!
Melissatry this....
QUERY = \"where TREND_DATE \> to_date(\'01/01/2006\',\'mm/dd/yyyy\') \"
Restrictions on QUERY parameter...
The parameter QUERY cannot be specified for full, user, or tablespace mode exports.
The parameter QUERY must be applicable to all specified tables.
The parameter QUERY cannot be specified in a direct path export (DIRECT=y)
The parameter QUERY cannot be specified for tables with inner nested tables.
You cannot determine from the contents of the export file whether the data is the result of a QUERY export -
Selected Query Parameter backend error
Hi, experts,
I am having some backend error whenever I add a parameter to the Selected Query Parameter to the ValueHelpQuery of an OVS.
Can anybody please tell me why it is happening?
Any help is needed and highly appreciated.
Regards,
May T.Hi, Horst,
Thanks, I understand it.
I did not bind that N_AccountUUID with nothing else. Do I have to?
I always add a new field to the SearchParameters and than I bind it in the Selected Query Parameters.
I don't bind it with anything else.
Is that a problem?
I just bound it with my BO data field and it shows "The data field is bound to query parameter".
Regards,
May T. -
Below expression works fine with text box but gives error in dataset expression.
="SET FMTONLY OFF select "+ join(Parameters!Column.Value,",") +" FROM pamcustom.dbo.vw_HFL_HFD_HotfileData INNER JOIN pamcustom.dbo.HFL_HFB_HotFileBatch on BatchID = HFB_intBatchID where BatchID ="+Parameters!BatchId.Value+"
and "+Parameters!cmbTranType.Value+" "+ iif(CountRows("DS_Aml_Mnr_Iss_Desc")=Parameters!Mnr_Iss_Desc.count," "," and aml_mnr_iss_desc in "+"('" & join(Parameters!Mnr_Iss_Desc.Value,"','")
& "')")+iif(CountRows("ds_ReportingCategory")=Parameters!ReportingCategory.count," "," and ReportingCategory in "+"('" & join(Parameters!ReportingCategory.Value,"','") & "')")+iif(CountRows("ds_NAICSubGroup")=Parameters!NAICSubGroup.count,"
"," and naicsubgroup in "+"('" & join(Parameters!NAICSubGroup.Value,"','") & "')")+iif(CountRows("ds_PortTrading")=Parameters!PortTrading.count," "," and porttrading in "+"('"
& join(Parameters!PortTrading.Value,"','") & "')")+iif(CountRows("ds_GL_LE")=Parameters!GL_LE.count," "," and gl_le in "+"('" & join(Parameters!GL_LE.Value,"','") &
"')")+iif(CountRows("ds_coagroup")=Parameters!cmbCoaGrp.count," "," and coagroup in "+"('" & join(Parameters!cmbCoaGrp.Value,"','") & "')")+iif(CountRows("Portfolio")=Parameters!cmbPort.count,"
"," and portfolio in "+"('" & join(Parameters!cmbPort.Value,"','") & "')")+IIf(IsNothing(Parameters!txtSecID.Value)," "," and secid in ('"+Replace(Parameters!txtSecID.Value,",","','")+"')")+iif(IsNothing(Parameters!minPortFilter.Value)
and IsNothing(Parameters!MinPort.Value)," "," and portfolio "+Parameters!minPortFilter.Value+Parameters!MinPort.Value)+iif(IsNothing(Parameters!maxPortFilter.Value) and IsNothing(Parameters!MaxPort.Value)," ","
and portfolio "+Parameters!maxPortFilter.Value+Parameters!MaxPort.Value)+iif(IsNothing(Parameters!minCoaFilter.Value) and IsNothing(Parameters!txtMinCoa.Value)," "," and portfolio "+Parameters!minCoaFilter.Value+Parameters!txtMinCoa.Value)+iif(IsNothing(Parameters!maxCoaFilter.Value)
and IsNothing(Parameters!txtMaxCoa.Value)," "," and portfolio "+Parameters!maxCoaFilter.Value+Parameters!txtMaxCoa.Value)
I guess the error " Aggregate and lookup functions cannot be used in query parameter expressions." is because I am using CountRow to ensure that if all values of multi select all selected i will not use that filter in where clause.
Pls. guide...Hi, Include your parameter total count in the dataset for parameter and instead of using countrows() function use the count from dataset in the expression.
Hope this helps.........
Ione -
Passing query parameter through xcelsius 2011 at run time
I am using reporting service as a web connectivity and I am trying to pass the query parameter at run time from the dashboard. While executing the xcelsius at first time it is working well with the default value but after passing the parameter from combo box, the data is not loading. It is not returning anything except the field name.
I am new to this xcelsius. Your help will be really appreciated.
Thanks.Hi,
if you do the following thing,i think it may be helpfull,
First select Data in menubar>Connection->select required connection>select the useage option in connection definition window>give trigger cell value as combo box destination cell.
Thanks,
Ramana -
hi ,
we are generate query in 2005b,and procced for execuite query.following problem occure'<b>odbc sql server driver'[sql server] syntax error the converting the nvarchar value' 70302/20307' to column of data type int received alert OAIB</b>
QUERY SHOWN BE AS FOLLOW.
SELECT T5.DocNum as'Po. No. ', T5.DocDate as 'Po Date',T0.CreateDate,T5.NumAtCard as 'Man.PO. No/ Dt.', T0.DocNum as'AP No. ', T0.DocDate as 'AP Date',T0.NumAtCard as 'Vendor Ref. No.', T0.U_vbdt as 'Vendor Ref. Date', T0.CardName as 'Vendor', T1.Dscription as 'Item', T1.Quantity AS 'QTY' , T1.Price as 'Basic Rate', (T1.Price *T1.Quantity) as 'Value',T0.Comments as 'Po No. & Po.Dt.' FROM OPCH T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN OPDN T3 ON T2.CardCode = T3.CardCode INNER JOIN PDN1 T4 ON T3.DocEntry = T4.DocEntry INNER JOIN OPOR T5 ON T2.CardCode = T5.CardCode INNER JOIN POR1 T6 ON T5.DocEntry = T6.DocEntry INNER JOIN OITM T7 ON T1.ItemCode = T7.ItemCode INNER JOIN OITB T8 ON T7.ItmsGrpCod = T8.ItmsGrpCod WHERE ( T1.BaseRef = T3.DocNum ) AND ( T4.BaseRef = T5.DocNum ) AND ( T0.U_vbdt >=[%25]AND T0.U_vbdt <=[%26]) AND ( T4.Dscription =T1.Dscription ) AND ( T4.Dscription = T6.Dscription ) AND (( T1.Dscription=[%0] OR T1.Dscription=[%1] OR T1.Dscription=[%2] OR T1.Dscription=[%3] OR T1.Dscription=[%4] OR T1.Dscription=[%5] OR T1.Dscription=[%6] OR T1.Dscription=[%7] OR T1.Dscription=[%8] ) OR ( T0.CardName=[%10] OR T0.CardName=[%09] OR T0.CardName=[%27] OR T0.CardName=[%28] ) OR (( T8.ItmsGrpNam =[%11] oR T8.ItmsGrpNam =[%12] OR T8.ItmsGrpNam =[%13] OR T8.ItmsGrpNam =[%14] OR T8.ItmsGrpNam =[%15] OR T8.ItmsGrpNam =[%16] OR T8.ItmsGrpNam =[%17] OR T8.ItmsGrpNam =[%18] OR T8.ItmsGrpNam =[%19] ) and ( T7.U_FirmName =[%20] OR T7.U_FirmName =[%21] OR T7.U_FirmName =[%22]
oR T7.U_FirmName =[%23] OR T7.U_FirmName =[%24] )) )Hi Vishal,
the value '70302/20307' is not an whole number so converting it to an int is not possible.
You should check your data for this value an change your query or data.
Regards
Ad -
Query designing problem while applying cell properties
Hello Experts,
I have a problem while designing query. Problem is as follow:
I have a calculated field on key figure column. This key figure calculates variance between 2 columns.
for E.g I have 2 columns Budget and Actual and third column is %Variance which should be
1. ((Actual - Budget)/Budget) *100 or
2. ((Budget -Actual)/Budget)*100, depening on some values on the row i should use any of these 2 formulas but the result should be dispalyed in single column % Variance.
how can i change the formula in key figures depending on these conditions. I can achieve this by applying cells but i dont want to do so as it is very complex way to desing these queries.
also let me know applying cells on query affects its performance or not?
Regards,
NiravHi Nitin,
Your reply may help me.
But my exact requirement is not that. Requirement is as follow:
I have created Char. Structure in row which contains few rows as revenue and few rows as expense.
I created them by creating selections. Now in case of expense the variance should be (Budget-Actual)/Budget *100.
In case of revenue variance should be (Actual-Budget)/Budget *100.
So, here i have to find out revenue & expense char. iresspective of which one is greater.
Regards,
Nirav -
Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
-- and event.Poid_id0 >= 266838277921701888****
-- and event.Poid_id0 < 267928993456455680****
-- and ebal.obj_id0 >= 266838277921701888****
-- and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--848478 wrote:
Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
-- and event.Poid_id0 >= 266838277921701888****
-- and event.Poid_id0 < 267928993456455680****
-- and ebal.obj_id0 >= 266838277921701888****
-- and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--Consider getting the asterisk key fixed, since it results in invalid SQL syntax -
How do I clear query parameter in Oracle 10g ADF
HI ,
My question is
1. when i am navigating to page B from Page A its querying data and showing . And I have same Pgae B which is attached to Menu also
so . How do i trace whether I am comming from menu or comming from Page A ..??
2. if i moved to page A and searched with some criteria , after then I moved to Page B from Menu , again come back to Page A from Menu
its retaining the old search criteria in the page . not clearing my search criteria . ( as a result what is happening its not showing the data whatever
in the Table ) . In order to show my existing data , i need to clear and then again clicking page B in Menu then only its showing the data .
so how to clear query parameter[email protected] wrote:
HI ,
My question is
1. when i am navigating to page B from Page A its querying data and showing . And I have same Pgae B which is attached to Menu also
so . How do i trace whether I am comming from menu or comming from Page A ..??Add a setActionListner and set a sessionscope variable according to the action?
>
2. if i moved to page A and searched with some criteria , after then I moved to Page B from Menu , again come back to Page A from Menu
its retaining the old search criteria in the page . not clearing my search criteria . ( as a result what is happening its not showing the data whatever
in the Table ) . In order to show my existing data , i need to clear and then again clicking page B in Menu then only its showing the data .
so how to clear query parameter -
I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve thisHi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Expdp error with query parameter
i am trying to use datapump and using query parameter in there as below...
but when i use the below, its exporting some system "repcat$" tables and
nothing realted to scott.audit table or anything realted to my query where
clause...what am i doing wrong ??
expdp system
DUMPFILE=test.dmp
LOGFILE=test.log
DIRECTORY=DATA_PUMP_DIR
TABLES=SCOTT.AUDIT
QUERY=SCOTT.AUDIT:'"WHERE TRUNC (audit.audit_timestamp)
BETWEEN TO_DATE ('01012008','DDMMYYYY') AND TO_DATE ('13012008','DDMMYYYY')"'
also when i use scott instead of system user i get below error
Export: Release 10.2.0.3.0 - 64bit Production on Wednesday, 22 July, 2009 12:53:45
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-39145: directory object parameter must be specified and non-nulli treid again, but creating a new datapump dir as follows...create or replace dir dpdump as '/backup/dpdump/orcl';
then gave grant read,write on directory dpdump to system
and now why is oracle looking at a differnt location ?? even when i changed the
direcotry ???
$ expdp SYSTEM
DUMPFILE=test.dmp
LOGFILE=test.log
DIRECTORY=DPDUMP
QUERY=SCOTT.AUDIT:'"WHERE TRUNC (audit.audit_timestamp)
BETWEEN TO_DATE ('01012008','DDMMYYYY') AND TO_DATE ('13012008','DDMMYYYY')"'
Export: Release 10.2.0.3.0 - 64bit Production on Wednesday, 22 July, 2009 13:27:18
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/oracle/app/oracle/product/10.2.0/admin/orcl/dpdump/expdat.dmp"
ORA-27038: created file already exists
Additional information: 1
$>
Seems little weird but can you:--
1. Drop the dpdump directory.
SQL> drop directory dpdump;
2. recreate it and then grant the permissions.
SQL> create directory dpdump as '/backup/dpdump/orcl';
The folders must exists in the location.
SQL> grant read,write on directory dpdump to system;
3. SELECT directory_name, grantee, privilege
FROM user_tab_privs t, all_directories d
WHERE t.table_name(+)=d.directory_name
ORDER BY 1,2,3;
Anand
Maybe you are looking for
-
Recorded new vocal into "varispeeded" project; get rid of artifacts?
Hi, Original bpm: 120. All tracks recorded in MIDI except my vocals. Bump bpm to 125 with varispeed. I like this tempo. Now, I record vocals with varispeed ON. They sound "warbley" and watery. I guess this was a big oops. Is there any way to get rid
-
How do I use a seagate external hard drive with airport extreme?
I have a 1tb Seagate external hard drive and I connected it to the USB port at the back of my Airport Extreme. I opened Airport Utility and am now lost. How do I access the hard drive? (I have a Macbook Pro running os x version 10.8.2)
-
Multiple Ipods on the same computer
I have an ipod mini, as does my roommate. We both have itunes and have had no issues downloading music and transferring to our ipods. Recently, an ipod shuffle was added to the computer successfully. Now, I cannot update my iopd mini, the songs will
-
Error Logs on 1000v Nexus Switch
Hi Team, We are below errors from one of our Nexus 1000v switch. Please advice me why we are getting this kind of errors. I can see the operational status is disconnected(Show Svs Connection) Logs: 2012 Dec 2 22:40:15 NODIPXX-N1KVM11 %VMS-3-CONN_CON
-
How do I designate myself in my iCloud contacts to use for autofill
how do I designate "myself" in my iCloud contacts to use for autofill