Query: PNP Logical Database Screen

Hi,
My requirement is to default some values in the SORT ORDER button of the PNP screen.
I can do that by creating a variant and attaching it to the Tcode, but is there any other way to do it.
Also, I need to add couple of new values to that list.
Please suggest how to achieve it.
Helpful replies will be rewarded.
Regards,
Amit

Amit,
you need to use Report categories as a solution to the issues mentioned in your mail.
You can access report category by going to attributes of your HR report which is using PNP logical database.
You will find a button in 'Attributes' dialog screen for HR Report Categories which will enable you to add new fields, default the values etc.
Reward points , if helpful.
Regards
Waz

Similar Messages

PNP logical database screen and provide statement.

hi all,
I have changed standard selection screen for PNP and now i dont have PERNR on it but it has only company code and one extra field added by me.
then after "GET PERNR."
Now if i execute statement "provide * from P0001 between pn-begda and pn-endda.", it gives me record for only pernr.
can someone explain me??
Reena..

As your report is tied to PNP, & you have only BUKRS as on the selection screen, the GET PERNR will be executed for all the PERNRs that belong to the Company Code input. You don't have to specify the Pernrs.. the LDB will select it for you..
~Suresh

Selection Screen of PNP Logical database

Experts,
I am stuck up in filtering of data.
I am using PNP logical database in Adhoc Query, if I select Current Month as data selection than also it is giving all list of data..
Can anyone give Input to me.
it is urgent.
Point will revert for useful answer.
Hetal.

how about if u do this step
1. Goto- Attribute.
2. Click "Change"
3. Click 'HR Report Category'
4. Click 'Create Report Category'
5. Click 'new entries' for careating Report Category
5. Select newly create report category
6. Click the folder 'Definition of Organizational Selection'.
7. Click 'New entries'.
8. Here you assign the required fields to be displayed, for eg pywerks - personal area.
9. finally assign this newly created 'report category' in the screen you will get upon clicking 'HR report Category' button in the Program attribute screen.
Hope this may help you. I am not much into hr abap. but sharing the info which i am aware.

Mandatory field in selection screen of pnp logical database report

Hi experts,
Im using pnp logical database in my report.
It give the standard selection screen. I need to make some fields in the selection screen as mandatory like pnpwerks.
How its possible. Give me some solution.
Thanks,
Priya.

how about if u do this step
1. Goto- Attribute.
2. Click "Change"
3. Click 'HR Report Category'
4. Click 'Create Report Category'
5. Click 'new entries' for careating Report Category
5. Select newly create report category
6. Click the folder 'Definition of Organizational Selection'.
7. Click 'New entries'.
8. Here you assign the required fields to be displayed, for eg pywerks - personal area.
9. finally assign this newly created 'report category' in the screen you will get upon clicking 'HR report Category' button in the Program attribute screen.
Hope this may help you. I am not much into hr abap. but sharing the info which i am aware.

Issue with 900 screen of PNP logical database.

Hi Experts,
I am using 900 screen in PNP logical database and assigned the default report catagory.
But in the selection screen when I click on further selection and select any of the parameter like company code/cost center, nothing comes in to the screen.
Request to let me know any issue there?
Br/Manas

hi
After selecting the fields from further options are you first adding them and then saying ok or just saying ok. Please check and let me know.
If you add and then say ok these fields appear on the screen,
Santoshi

Standard screen for PNP logical database

hello All,
I am using PNP logical database and i have modified the standard selection screen for PNP.
But now there is a button that appears , although the rest is supressed as i wanted it to.
Our forums active contrubutor suresh datti has provided me a solution before to go to sytem then status and then click screen 100 then invisible the push button and activate and re-execute the program. The method seems to work fine. But surprisingly after some time the button appears again..
any idea..??
thanks,
Reena..

>>>I do not knw how to create a variant or how variant are related to selection screens..can u please elaborate..
Don't worry..then its not the issue..
anyway Pl take a look at the following <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c0/980374e58611d194cc00a0c94260a5/frameset.htm">SAP Help</a> on Variants.
~Suresh

Using PNP logical database in report

Hi i'm using the PNP logical database in my report, and i want to hide all fields in the 'Period' frame.
is there any way to do it automatically or is it necessary to hide them one by one??
Thanks in advance.

If you can put them all in the same screen group, you may be able to do this. But you might run into problems when you re-generate.
Rob

IN HR PAYROLL REPORT USING PNP LOGICAL DATABASE

Dear abapers,
                        when i ab runing HR payroll report usin PNP Logical database there are some error occurs.
            INCLUDE DBPNPCOM
                     IN UNICODE PROGRAMS, THE "-" CHARECTOR CAN NOT APPEAR IN NAME , AS IT DOES HERE IN THE NAME
                    PNP-SW-FOUND.
     INCLUDE DBPNPCOM
                   IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
                   PNP-SW-IGNORELOCKEDRECORDS.
     INCLUDE DBPNPCOM
                   IN UNICODE PROGRAMS , THE "-" THE CHARECTOR CAN NOT APPEAR IN NAMES, AS IT DOES HERE IN THE NAME
                   PNP-SW-ENQUEUEPERNR.
                        PLEASE GIVE ME SOLUTIONS .
                                                                     THANK YOU SIR.

Hi, please check, these might be warnings, not errors.

Line item in PNP logical database

Hi All,
Can anyone tell me, what is the selection logic for PNP Logical database, suppose in one report we use PNP Logical database,
So when we put some date range, so in the output of report there are 2 fields, so during that date range 1 field occurs two time and other field 4 times, so how many line items would be displayed by that report.
Regards,
Kumar

read documentation for report SAPDBPNP or SAPDBPNPCE.

TABLES statement in pnp logical database

I am using PNP logical database in my program.
when i check for obselete errors it is showing the statements
"TABLES: PERNR.
INFOTYPES: 0001,0002." are Obselete
But my program is logically correct and also working.
can u tell me how to resolve this error.

tables sflight is exactly the same as data sflight type sflight.
The same for the infotypes statement, but then you have to reference to the pa#### table.
Kind regards, Rob Dielemans

Report creation with PNP logical database

Hi All
Want to select data according to the begda and endda on the selection screen, if any body has the code will be of great help
rgds
aj

Hi,
In the attributes,give PNP as logical database.
Then in the program,paste the following coding.
tables pernr.
infotypes 0001.
start-of-selection.
get pernr.
provide * from p0001 between pn-begda and pn-endda.
write : / p0001-begda, p0001-endda.
endprovide.
end-of-selection.

Query using logical database

Hi,
There is one query which is using logical database PNM. I have got one requirement to add one field in selection screen to filter the output. The field which is required to be displayed in selection screen to filter the data is from table mkal which is not present in logical database. Hence my question is, is it possible to add field from table which is not present in logical database? IF yes, please specify the procedure.

Hi Jogeswara,
Thanks for your inputs.
But my question is, how can I filter the data which is being fetched by standard logical database. I cannot go inside the std. LDB and change internal tables of it. I tried coding in extras, but I think it works only if we want to add additional fields in output.
At present, we are considering the option of creating a z LDB where we copy. std. LDB and also add the reqd. table which is not present in LDB.
Is there any other option?
Please provide your valuable inputs.
Regards,
Imran Kundan.

Re: Query for logical database

Hi Experts,
can anybody giveme any link of step-by-step how to create a query from sq03,sq02,sq01 with logical database for CIK.
if anybody have done the query for logical databse for CIK give me ur input how to create.
Thanks in advance,
KK.

Hi
Go to SQ01 -- Enviornment --Query area - select Standard area or global as you require.
Then go to Enviornment - Infoset - search for the existing infoset if available as per your requirement or create an infoset here.
Write the name of Infoset and click on create . Fill all the required field like name , logical database - CIK, press enter it will populate the structure of logical database CIK, you may include /exclude here the nodes, or keep it as it is.
And press enter.
Now you have to create Field group and the fields inside the each group.
You may create thefield group by clicking the create icone in the right hand side of teh screen and may drag the then fields by double clicking inside the group.
Please mainatin sequence as per the characteristic of the table, like first select masterdata then transactuional!
Save it. It will ask you for package, but click on local object and save it.
Go back , it will prompt for generate infoset, say yes.
Now your new infoset is coming among other infosets. (it is advisable to search for the existing infoset if available to avoide inconsistency in infosets).
Now select your infoset and assign this to user groups by clicking the tab for this, you need to select user groups for this infoset here, who will be authorised to use this query.You need to take care about the user group, as this will allow you to see your infoset at the time of query generation / display.
Save it and go back and again go back.Cross check that you are in standard query area (as selected in first step)
Now give the query name and click on create. It will show you your infoset , select that.
It will propmt you the next screen for name , no.of columns required, output formats etc.
Fill as required and go to basic list now you will have screen as SQVI and have to select your selection field and output filed. After selecting the required fileds save it and execute this .
Cheers
Mukta
Edited by: MUKTAKUMARI on Aug 3, 2009 11:45 AM

ABAP query using logical database KDF is not populating custom fields

Hi Experts ,
I created two following queries
1.       VENDORCATKDF – uses KDF logical database
2.       VENDORCATLFA1 – uses table = LFA1
I’m pulling the same information in both queries:
·         Vendor Number
·         Country
·         Vendor Name
·         Vendor Category (custom fields added to LFA1)
The results for the query that uses the logical database KDF is incorrect. It doesn’t pull in the flag on the custom field LFA1-ZMRO.   Even though the logical database KDF is made up of the table LFA1 and has these fields.
Is there something that can be done – so that all of these “custom” category fields under LFA1 (such as LFA1-ZZMRO) – get pulled into queries – when we use the logical database KDF ?

Hi,
I have got the error removed by ensuring that fields from one table are a part of one line ( taking help of ruler) only. But the underlying problem remains, the output is not ALV but List output.
I do not think having additional fields in the query is reason for this.
Is it bcoz iI am adjusting the output length of columns to ensure no hierarchical error ?
Can we not have a query using LDB which is shown as SAP List?
Regards,
Garima.

HR PNP Logical Database Using Cost Center selection: error!?

Hi all,
I'm using PNP logical data base and using the selection-fields available through HR Class Reports (a copy of PAY_DEF) but what happens is if in selection-screen I fill the personnel number say 1000, i get the payroll data I'm trying to get, but if i use the search field cost center of that exact person i get nothing. Does anyone has a clue on what i might be doing wrong? Because all the other search fields work, company code, HR area, everyone, but cost center, and I'm positive that i use the right cost center.
Thanks in advance,
Paula

Even though nobody answered me, i finally found the solution for my problem. so and because someone might need it here it is:
Go to Spro->Personnel Management->Human Resources Information System->Reporting->Adjusting the Standard Selection Screen and then:
1st Create Report Categories and
2nd Assign Report Categories
Since not all rep. categories on the 1st assignment is explicit on how will sel screen appear i advice you to go to the 2nd point, and execute some of the programs that appear there, and that might look alike to what you are looking for, and if you are so lucky as to find one exact use the same report category in your program, if its very alike, well, copy the Report Category into one of your own and change it the way you need it to be.
Hope this be helpfull for someone.
Paula.

Query: PNP Logical Database Screen

Similar Messages

Maybe you are looking for