Query Problem while doing Transportation

Hi,
Last Month in the <b>release I</b> i created 17 Reports and there are assigned to RRI also.
After that i Transported both the reports and RRI to QA. It is success .
Later on there are some modifications in the reports and i modified them and i again Transported both the reports and RRi and it was success.
This month in the <b>release II</b> i again modified the same 17 reports and i transported the reports to QA. The problem is 13 reports had changed in the QA but the remaining 4 reports are shown as 8 reports(4 x 2) with same technical names . I did not transport the RRI this time.
So i found a single report as 2 reports with same technical name. this means that it has not overwritten.
How should i solve this problem.
Can any one give the solution for this.......
Thanks & Regards
Jagannadha Raju

Hi,
Check which elements of the query has not been transported, Check the queries in QA and you will find what is missing and also check that the missing Elements of the query are not saved in $TMP folder. Find out exactly which of the missing elements are not transported and transport them alone will do the job.
Also notedown the technical names of the missing elements and you can find which item it is by searching in Metadata Repository first search with the Query Technical name and then include technical name of your Query element.
Regards
Ranga
Message was edited by:
Ranga

Similar Messages

Problem while doing bdc for fv60

Hi frends,
I got problem while doing BDC for fv60 tcode.i have given
header items:
vendor number
invoice date
posting date
amount
item data:
g/l acc no: 100000
amount 1000 whatever
these are all given in recording
in recording after all giving this data if we click on park it is telling "parking not possibe duiring batch input".
can any body tell me the process for recording shdb and after that in bdc how can we give multiple line items for fv60
thanks,
naveen.

I don't think you can use FV60 in batch input. Your options are to use transaction FBV1 or bapi BAPI_INCOMINGINVOICE_PARK.
Rob

Facing problem while doing MIRO

Hi gurus,
I facing problem while doing MIRO, system showing the message "Customization for "company code" J_1iindcus missing in the table"
pls help

Hi,
Please do customization for India Localisation-Phase-II.
In transaction J1IT, maintain company code settings.
J1IT->Global Settings->Company Settings
Reward if useful.

Query Problem while execution

Hello Friends,
I have a problem while executing a query.
When I run any query from any role, by default it is opening other working workbook.
After the refresh also, it is not doing anything, still shows the same workbook results.
It is displaying the underneath query as query from the above workbook only.
Same query from a workbooks Role works okay, but when I run the same query from querys role, it is causing this kind of strange behavior.
Can someone please help me?
Thanks
Priya

Hi Bhanu
I think, that could be the problem.I have created a Z program and assigned a default template for all queries, before I could verified your solution.
By the time, I checked it from the settings, it is already showing the default template which I have assigned.
The issue is fixed now.
Thanks
Priya

STO Problem while doing GR against outbound delivery

Hi Gurus,
Need your help regarding STO,in my case i created
1. STO
2. Delivery in VL10B t code and did PGI
3. on the basis of Delivery i created billing document
4. Excise invoice in J1IIn
Now while doing GR against outbound delivery system in not doing GR giving some error code 1 as follows
Goods receipt not possible for delivery 4900000212: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
My delivery types shipping points everthing is in place but am not able to trace out whats the problem. Please help its urgent
Regards
Vivek

Hi
Based on the error code 1 , it says that the delivery does not exists in the system, That means you cannot perform a Goods receipt againsst the document specified
I have also not done Goods receipt with reference to Outbound delivery. So i am not able to confirm that this can be done or not.... i will definitely get back to you on this.
Thanks & Regards
Kishore

Problem while doing PGI for Returns Delivery

Hi,
We are facing some problem which doing PGI for a returns delivery. Our scenario is HU and WM managed. After creation of delivery I have created a TO and has two different valuation type of same material. Total quantity in TO is 2, 1 of each valuation type. So, automatically, batch split happened for the line item in delivery.
Now when I am trying to do PGI for this delivery, I get en error message saying "Enter Valuation Type". The movement type used here is 161 (Vendor Returns)
Same thing is happening successfully for movement type 643 (Transfer inter company code). What I can gather is that while creating 161 document against delivery system is not automatically taking the valuation types mentioned in line item of delivery.
Let me know possible reasons for this error and resolution.
Regards,
Vishal

Implement the OSS note 965985

Problem while doing vl10d ....

Hi experts ,
I'm facing a peculiar problem . While doing VL10D / vl10g , the outbound delivery document no. is not generated - and it's showing like this ... I don't know why it behaves as such ?? ....
During creation of purchase order it behaves properly , shows the shipping tab - properly filled the shipping data and others inputs .
Please help me to get the problem is resolved ...
regards
arghya .

Hi Arghya,
Couple of thing which you need to check
1. Can You post the screenshot of the STO number in VETVG table
2. Check the delivery date on the STO.
3.Also in the item level check the chipping table route is populated.
4. Also check the STO has been released
Arun Prasad

Ended with return code: === 8 === while doing transports from Dev to Test

Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request   : BD1K900065
System              : BQ1
tp path             : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.

Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu.

Problem while doing the Cheque print through f-58

Dear Team,
I am encountering an issue while doing the Transaction through F-58 System is generating the cheeque print with coma instead of decimals i.e instead of 1,00,000.00 its comming as 1.000.000,00.
Please advice how to correct this.
Thanks for the consideration.
Regards,
Suma Nalluri.

Dear Nambi,
I have checked the settings there evry thing is fine.Still i am facing the same issue. I do not understand may be due to any bug .Please advice.
Regards,
Suma.

Hi, problem while doing Release Strategy.

Hi,
I am having a problem while Creating Release Groups.
" Please Check Release Classes (See Long Texts)"
This is appearing on the Screen while I am trying to Save the Release Group.
Please anyone give me solution for this.............
Thanks & Regards,
Swathi

Hi,
I think this happens because you are defining different release group using different class but using same class type for those classes.
E.g.:
====
Rel. Grp     Class
98              Z_Class1
99              Z_Class2
Z_Class1 has the same class type as Z_Class2.
Hopefully this helps.

Problem while doing PGI

I tried searching for this error below but i could not find any relevant thread.
I get the following error while doing PGI:
Fld selectn for mvmt type 601 / acct 7001012003 differs for Sales order (013)

but i could not find any relevant thread
Surprising!!!!!!
Not sure with what text you had searched. Either the error message should be typed in full without any abbreviation or with error message number. More than 15 threads you can find in Google.
G. Lakshmipathi

Problem while doing MFBF

Hi Gurus,
While doing MFBF transaction i was not able to see the 131 movement in MB03 T.code.
I was able to see the 261 movements fine as well.
Help to solve this..
Thanks.

Hi,
Please check the control key maintained in the routing of the material.
Auto GR should be activated in the control key (PP03)
Then you need not go for seperate GR for the material.
Come back if any issues.
Ghanshyam

Problems while doing following Tutorial

Hello all,
I have problems while completing following tutorial:
http://www.oracle.com/technology/obe/obe9051jdev/ToplinktoDatabinding/toplinktodatabinding.htm
Everything is fine until I reach the step to create the databinding.
After I drag and dropped the table to the databinding field, I get following warning:
Warning, no session.xml
A session.xml, that can be created from New Gallery, was not detected fpr the TopLink project associated with the selected class. In order tu use the TopLink Client/Server erchitecture, you must define a session.xml containing a Server Session for the associated TopLink project. If uou continue without creating a session.xml, this data control will not have the benefit of a Server Session shared across the given application (recommended TopLink architecture for ...
Is it necessary to have such a session.xml?
And after I finished the tutorial, I don't get any data, in every case, wether with or without a session.xml.
It would be nice, if anyone could give me a answer. Thanks a lot.

Problem solved:
created a session.xml and everything worked fine.

Problems while doing a rollback on MQSeries using a java client

Hi,
I'm new to using MQSeries with Java client. I have a kind of similar problem. I have a set of messages in a Queue. When i'm doing a rollback on certain message it's returing to the same pointer where it had come from in the queue. When i'm iterating through the messages in the queue using a for loop, the same message is again retireved. So, i tried to set the setMQGMO_MARK_SKIP_BACKOUT flag to true. But i'm getting an RequestException with error code 2046: MQRC_OPTIONS_ERROR
Any help on this would be highlly appreciated.
I'm pasting the code snippet below.
Class X {
public void receive(
com.stc.connector.webspheremqadapter.message.IMessage input, com.stc.connector.webspheremqadapter.message.IMqOtd
MQSeries_1){
int msginqueue = MQSeries_1.getCurrentDepth();
String corrID = "";
byte[] corrIDInputArray = input.getMsgHeader().getCorrelationId();
String corrInputID = (new String( corrIDInputArray )).trim();
for (int i = 0; i < msginqueue; i = i + 1) {
MQSeries_1.getQueue().getGMO().setMQGMO_SYNCPOINT( true );
MQSeries_1.getQueue().getWithOptions();
byte[] corrIDArray = MQSeries_1.getMessage().getMsgHeader().getCorrelationId();
corrID = (new String( corrIDArray )).trim();
if (corrID.equalsIgnoreCase( corrInputID )) {
MQSeries_1.commit();
} else {
MQSeries_1.getQueue().getGMO().setMQGMO_MARK_SKIP_BACKOUT( true );
MQSeries_1.backout();
}

I agree that you should check for a specific axis / tomcat forum (maybe on apache website??;)) anyway ... check the path and classpath you use while building the wsdd file and when running the adminclient, and check the syntax of its invokation

Facing a problem while doing DML Operations in Discoverer (Urgent!!)

Hi,
I am facing a problem in one of the discoverer report i am working on. I would appreciate if you could help me to to find a solution for this -
I am triggering a custom package from the Discoverer. This package is inserting the data in a custom table. As we can not directly put the DML statements in the discoverer 's package so i have defined that package as the Pragma Autonomous. The custom table that is being populated is a regular table (i.e not a Global temporary table). In the custom folder in Administrator i am just selecting the data from that custom table.
Problem- When i run the report from discoverer, the data is getting inserted into the custom table, that means the package is working properly but still the report does not show any data. May be the query being executed even before the data is inserted into the table. Can you please suggest what is that i am missing in this solution?
Few facts of the report-
1. I am using only one worksheet.
2. The package is inserting the data in the custom table so i don't see any problem with the package and triggering it.
Thanks for your help.
-Anshul

Hi Michael,
This is not really an update. The functionality of the report is simple - Based on the parameters selected in the report, the package will get the data from queries and insert into the table. now the data in the table can be different for different users based on the parameters. what my concern was,
Consider a case of 2 users using this report almost at the same time.
We are not using the temporary table so we will have to truncate the table every time the report is ran, before inserting the new data in it.
Now suppose user -A runs the report and during it processing the 2nd user runs it with some different parameters. Then the 1st user's data will be deleted from the table.
does it sound right?
I was trying to achieve this functionality by using following functionality but here also i am facing a problem -
Now i am not inserting the data in the table but i have created a view that does the same thing as it was done by package in the previous case. and in order to pass the parameters in the view i am using set_context. I have created a package that is triggered by discoverer report and in that package i am setting the context. now i am facing the following problems -
a. Does the Set_context set the context globally?
b. Do i need to clear the context at the completion of report?
c. If the answer of the question - b is yes then where can i place that clear_context in the discoverer?
Thank you so much for your help.
thanks
-Anshul

Query Problem while doing Transportation

Similar Messages

Maybe you are looking for