Query refreshing problem

Hi All ,
                  We got this message when refreshing a detailed query from PA in an existing work book
                                RFC_ERROR_SYSTEM_FAILURE
                                error : No roll memory of length 86716416 available for event stack
                   However, if you refresh the query form the server it works fine
                    Any ideas .. for this problem?..
Regards,
Aditya

txs..

Similar Messages

Af:query refresh problem

Hi OTN,
I am using JDeveloper 1.1.1.3 and ADF Faces with ADF BC Components.I have a search page having af:query component,delete button and a af:table component.While clicking the delete button,It will change the status of selected row and remove from the search result .In my case status is updating in database but not in search grid.It will reflect after clicking the search button of af:query panel.So please point me a solution for programmatically refreshing the af:Query

Hi Dinil,
Try this -
1. Open the View Criteria section in your view object.
2. On the right top corner, check if Query Execution mode is "Database".
3. If it is "database", change it to "In Memory".
Hope it works
Regards,
Srinidhi

Row ranges 1-15, 16-30 in select list has refresh problem

Hi, Gurus:
I use APEX 4.1.1 with Oracle 11GR2. I have a question that was discussed before here, but I still have trouble to understand it. I have some reports that cannot refresh content when I choose another page of the same report. I used row ranges 1-15, 16-30 in select list with pagination. It did not work. However, I used the exactly same report page settings for some other queries producing exactly same columns, except the query logic is slightly different thus number of rows in report are different. row ranges 1-15, 16-30 in select list with pagination works well in other reports.
I came across discussions and set partial page refresh to no for those report pages with refreshment problem. This time it worked well, but it was extremely slow as my query is very slow. I was wondering why some of report do not need to set partial page refresh to no and have no problem to refresh, but some of reports have problem to refresh (I even copied the report page without problem for those reports with problem and just change queries.)? Is there any other way to refresh these reports quicker other than SQL tuing?
Please help me.
Sam
Edited by: lxiscas on Dec 31, 2012 11:36 AM
Edited by: lxiscas on Dec 31, 2012 11:49 AM

I just found that it is due cache page settings, I should set it to no as a developer

VBA and Bex 7- Event to use in VB code BEFORE Query Refresh ?

Gurus.. is there a Bex Event that I can use to 'intercept' a Refresh Query command to Bex and run some VBA first ? I'm trying to find a way to solve the analysis grid overlap problem when two queries are provided on one Excel worksheet, and navigation takes place.
I've been able to figure out how to bring the results areas together (by deleting blank rows between them), but I'd like to be able to add a chunk of blank rows between analysis grids before the queries actually refresh.

Hi Charlie,
if you're interested:
I've found a way to move the areas after the refresh - using the callback event.
The logic is generally:
- Check where analysis-grid for DP1 ends
- Leave some empty lines
- Move the offset of DP2 here.
- Repeat the same for further DP's.
There's only one hatch: I've got some trouble to reactivate the BEx-context-menu after this momvement.
So far I found only the workaround "do another refresh" to solve this issue; that's ok but not 'beautiful'.
Let me know if you need further input.
Maybe you've got an idea for my issue:
I'm looking for a way to execute the a routine only once after refresh - even if there are multiple queries in a workbook.
The problem is that I do not know the order of the query-refresh or any flag that I could use to identifiy the "last query to be processed in this refresh-run".
Kind regards,
Marco

Animated gif and page refresh problem

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Smartview 11.1.2.1.102 Refresh problems

I have multiple users experiencing severe refresh problems after upgrading to smartview version 11.1.2.1.102.
Users state Refresh is taking 10-15mins+ when in old version 9x it only takes 1-2mins. In addition users have rebuilt the excel files (copy in new workbook) then all is working fine but when saved/the next day the refresh goes very slow again!
Please can any help?

1. Deleting the Sheet Info fixes the problem for the moment - but the problem soon returns. Do you know what causes the problem, so we can cut the repeating cycle? Is this strictly a multi-user issue? We do have several users that may use the file. Some have version 11.1.2.1.000 (not 103). Oracle's tips doc (http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-102-1612164.pdf) mentions uncompressed metadata stored in the worksheet.
2. Is there a specific version that allows the Sheet Info fix? Oracle's tip sheet says they need Some have version 11.1.2.1.103, but the users we have seen so far can use this workaround on Some have version 11.1.2.1.000. I'd like to know when at what version this fix starts so I can push other users to update. It would be good to know at which version this issue starts.
Thank you - great information in the thread!
P.S. for reference:
From http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-102-1612164.pdf
In EPM System Release 11.1.2.1, I am opening .xls files with Smart View functions in Excel 2010, but it’s very slow or seems to freeze Excel. How can I fix this?
This is most likely due to an issue with uncompressed metadata stored in the workbook. In most cases, the issue can be found in the first sheet in hidden shapes. Note that the file will open but it may take a very long time, and in some cases the file will open fine with Smart View disabled. In other cases it will not matter. To solve this problem, save a copy of the file and follow the steps below for the version of Smart View you have.
If you are using Smart View 11.1.2.1.103 or above, follow these steps:
1 Open the file (this may take a while) with Smart View enabled.
2 From the Smart View Ribbon, select Sheet Info.
3 Select Delete Smart View Info.
4 Select Workbook and all Sheet Info.
174 Miscellaneous and Product-Specific Tips
5 Click OK.
6 Save the modified workbook.
7 Reopen the workbook.
If you are not using Smart View 11.1.2.1.103 or above, follow these steps:
1 Open the file (this may take a while).
2 Right-click on the tab of the first worksheet and select Select All Sheets.
3 Right-click on the tab of the first worksheet and select Move or Copy.
4 In the drop-down box, select (new book) and check Create a Copy.
5 Save the workbook.
6 Open the new workbook.
7 Refresh the data.

About query related problem

hi ,
we are generate query in 2005b,and procced for execuite query.following problem occure'<b>odbc sql server driver'[sql server] syntax error the converting the nvarchar value' 70302/20307' to column of data type int received alert OAIB</b>
QUERY SHOWN BE AS FOLLOW.
SELECT T5.DocNum as'Po. No. ', T5.DocDate as 'Po Date',T0.CreateDate,T5.NumAtCard as 'Man.PO. No/ Dt.', T0.DocNum as'AP No. ', T0.DocDate as 'AP Date',T0.NumAtCard as 'Vendor Ref. No.', T0.U_vbdt as 'Vendor Ref. Date', T0.CardName as 'Vendor', T1.Dscription as 'Item', T1.Quantity AS 'QTY' , T1.Price as 'Basic Rate', (T1.Price *T1.Quantity) as 'Value',T0.Comments as 'Po No. & Po.Dt.' FROM OPCH T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN OPDN T3 ON T2.CardCode = T3.CardCode INNER JOIN PDN1 T4 ON T3.DocEntry = T4.DocEntry INNER JOIN OPOR T5 ON T2.CardCode = T5.CardCode INNER JOIN POR1 T6 ON T5.DocEntry = T6.DocEntry INNER JOIN OITM T7 ON T1.ItemCode = T7.ItemCode INNER JOIN OITB T8 ON T7.ItmsGrpCod = T8.ItmsGrpCod WHERE ( T1.BaseRef = T3.DocNum ) AND ( T4.BaseRef = T5.DocNum ) AND ( T0.U_vbdt >=[%25]AND T0.U_vbdt <=[%26]) AND ( T4.Dscription =T1.Dscription ) AND ( T4.Dscription = T6.Dscription ) AND (( T1.Dscription=[%0] OR T1.Dscription=[%1] OR T1.Dscription=[%2] OR T1.Dscription=[%3] OR T1.Dscription=[%4] OR T1.Dscription=[%5] OR T1.Dscription=[%6] OR T1.Dscription=[%7] OR T1.Dscription=[%8] ) OR ( T0.CardName=[%10] OR T0.CardName=[%09] OR T0.CardName=[%27] OR T0.CardName=[%28] ) OR (( T8.ItmsGrpNam =[%11] oR T8.ItmsGrpNam =[%12] OR T8.ItmsGrpNam =[%13] OR T8.ItmsGrpNam =[%14] OR T8.ItmsGrpNam =[%15] OR T8.ItmsGrpNam =[%16] OR T8.ItmsGrpNam =[%17] OR T8.ItmsGrpNam =[%18] OR T8.ItmsGrpNam =[%19] ) and ( T7.U_FirmName =[%20] OR T7.U_FirmName =[%21] OR T7.U_FirmName =[%22]
oR T7.U_FirmName =[%23] OR T7.U_FirmName =[%24] )) )

Hi Vishal,
the value '70302/20307' is not an whole number so converting it to an int is not possible.
You should check your data for this value an change your query or data.
Regards
Ad

Query designing problem while applying cell properties

Hello Experts,
I have a problem while designing query. Problem is as follow:
I have a calculated field on key figure column. This key figure calculates variance between 2 columns.
for E.g I have 2 columns Budget and Actual and third column is %Variance which should be
1. ((Actual - Budget)/Budget) *100 or
2. ((Budget -Actual)/Budget)*100, depening on some values on the row i should use any of these 2 formulas but the result should be dispalyed in single column % Variance.
how can i change the formula in key figures depending on these conditions. I can achieve this by applying cells but i dont want to do so as it is very complex way to desing these queries.
also let me know applying cells on query affects its performance or not?
Regards,
Nirav

Hi Nitin,
Your reply may help me.
But my exact requirement is not that. Requirement is as follow:
I have created Char. Structure in row which contains few rows as revenue and few rows as expense.
I created them by creating selections. Now in case of expense the variance should be (Budget-Actual)/Budget *100.
In case of revenue variance should be (Actual-Budget)/Budget *100.
So, here i have to find out revenue & expense char. iresspective of which one is greater.
Regards,
Nirav

Query has problem

Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
--                   and event.Poid_id0 >= 266838277921701888****
--                 and event.Poid_id0 < 267928993456455680****
--               and ebal.obj_id0 >= 266838277921701888****
--             and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--

848478 wrote:
Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
--                   and event.Poid_id0 >= 266838277921701888****
--                 and event.Poid_id0 < 267928993456455680****
--               and ebal.obj_id0 >= 266838277921701888****
--             and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--Consider getting the asterisk key fixed, since it results in invalid SQL syntax

Screen refresh problem where data is entered and the screen doesn't refresh

Many people in the company are experiencing the odd screen refresh problem where data is entered and the screen doesn't refresh to show the updated result in corresponding cell formulas.
Microsoft have issued a hotfix to fix the issue for Excel 2003 as shown. Microsoft released a hotfix for this problem (<a href="advisory?ID=978908">KB978908</a>). Display memory tends to pick up data from hidden sheets and pastes it
into the active screen. No impact on the file. This occurs when protecting and unprotecting worksheets in VBA. I also suspect that enabling and disabling screen refresh contributes to this problem. In any case there is a fix, albeit with the following disclaimer:
As of yet I have not been able to find a fix for this for office 2010 and 2013, Any suggestions would be great.

Hi,
Based on your description, Excel does not show the text strings when you typing. It may be caused by the cell format, if we set the cell format as ";;;" in custom format, it will not display the text that you typed.
And the issue may be caused by the third-party input method, there are some compatibility issue between them.
If the issue still exits, please try the following methods
Verify/install the latest updates
Repair your Office program
Regards,
George Zhao
TechNet Community Support

Container (JPanel) refresh problem

Hello,
In fact i have a panel (mainPanel) with a button OK, a another panel which display a specific MyJTable and combo box.
In fact, when I clic OK Button, i want to charge my MyJTable with data depends on comboBox.
First, i display a empty white panel and when i clic Ok i want to display my MyJTable.
JPanel mainPanel = new JPanel();
JPanel emptyPanel = new JPanel();
JPanel combo = new JComboBox();
JButton okButton = new JButton();
MyJTable myJTable;
mainPanel.add(emptyPanel);
mainPanel.add(combo);
mainPanel.add(okButton);I have a refresh problem, i try mainPanel.remove(emptyPanel) and thus mainPanel.add(myJTable), the remove works but the add no :(
In ActionPerformed method when okButton:
myJTable = new myJTable(combo);
mainPanel.remove(emptyPanel);
mainPanel.add(myJTable);
mainPanel.repaint();Thanks for yu help!!

Hi,
have you tried playing with
mainPanel.revalidate();
mainPanel.revalidate();??
Might help
Phil

Screen refresh problem with Windows 7

Hello all,
I've recently begun testing Oracle with Windows 7 on a new HP 2540p notebook computer. I've encountered a very strange issue so far. After logging into Oracle, and Windows switches to Windows Basic theme, I should be taken to the main Navigator screen. But instead, the screen is simply white. If I drag (or nudge) the title bar just a bit, the screen refreshes and I can see the menu items. Then if I click on something (or even use hotkeys - ALT+F to get the file menu, for example), I don't see anything happen. But if I move the window just a bit, the screen refreshes and I can see that it did actually take my input, it just didn't re-draw the screen. I'm wondering if this may be a graphics driver issue (I do have the latest driver for the Intel Graphics Media Accelerator HD adapter), or if someone could point me toward a resolution to this problem. Any help is much appreciated.

Dear All,
Same problem of REFRESH PROBLEM also faced by but only a single and specific Windows 7 client.
if you have resolved the issue , so please share with us.
Thanks
Eidy

Datagrid refresh problem?

fileListArray.refresh();
dg_curtainmanager.invalidateList();
dg_curtainmanager.invalidateDisplayList();
<mx:DataGrid id="dg_curtainmanager" showHeaders="true" editable="true" includeInLayout="false" dataProvider="{fileListArray}" creationComplete="" variableRowHeight="true"   wordWrap="true" rowCount="{fileListArray.length}" width="100%" >
<mx:DataGridColumn headerText="Parent Folder" sortable="true" editable="false"   width="250" minWidth="65" wordWrap="true" >
                        <mx:itemRenderer>
                            <fx:Component>
                                <mx:HBox width="100%"
                                         horizontalAlign="left" verticalAlign="middle">
                          <mx:Image source="@Embed(source='images/edit_16.gif')" toolTip="Select Starting Folder" buttonMode="true" click="outerDocument.parentfolderimagclick()" />
                                    <mx:Label text="{data.document_folder_name}" color="black" />
                                </mx:HBox>
                            </fx:Component>
                        </mx:itemRenderer>
                        </mx:DataGridColumn>
</mx:DataGrid>

@welcomecan,
What refresh problem you are facing.. in DataGrid? When you change your DataProvider for your grid the values are not being changed or somethingelse..??
Please always be clear in explaining your problem in order to get it resolved..
Thanks,
Bhasker

Forms Refresh Problem on The Web??

i have a form coded in 6i. in this form i have around 20 buttons one below another and each of the button has a stacked view associated with it. whenever i click on a button i am opening the relative stacked view on th content canvas and repositioning the rest of the bottons and views by moving them down.
Now the problem is it works fine in client-server, but when i run it on the web, when i try to open any of the buttons the screen scrolls automatically to the top. I also noticed that if i wait for a few seconds(or sometimes minutes) the form takes me to the correct position. i think there is some refresh problem. i tried Syncronize also but to no use.
i would appreciate If someone can help me out on this ASAP. (thanks for the patience in reading this long mail!!)

Try to instal the latest version of Jinitiator. I have similar problems, but my case is not so bad. Jinitiator develops very quickly and as i have heard it works now fine.

G5 quad gf6600 refresh problems

I have refresh problems (never had it with 2.5 bipro)
in photoshop the layers do weird things and leaves traces.
in lightwave if i select a point op poligon, nothing seems to happen, only when i resize the view it refreshes.
lightwave is freshly installed, ph is a port from the old mac

upgraded programs

Query refreshing problem

Similar Messages

Maybe you are looking for