Query regarding Balance carry forward value in KNC1

Hi Experts,
Please let me know whether the field UMSAV(Balance carry forward field) will be accumulation of all BSID and BSAD transactions for particular KUNNR for their respective HKONT values.
If some transaction is updated in BSAD or BSID, will it compulsory reflect in KNC1 table or not? Please let me know.
Regards,
Kiran A.

Dear Kiran,
The values on UMSAV per definition matches the summarization of all the open item values for a customer number as the resulting amount of summing up the balance carry forward from the previous fiscal year plus the movements on the suitable year.
Nevertheless, it is updated under the summarization of the value on UMSAV for the previous fiscal year and adding the total amount of items posted on bsid AND bsad. You must notice that it only depends on which period the movements take part, the S/H movement, and that it doesn't depend on the GL account but the customer number. If you also need the GL account you must also check KNC3 for Sp.GL operations, KNB1 and T074 tables.
I hope this information helps. Regards,
Lidia

Similar Messages

GL Balance carry forward have wrong value in FS10N ?

Hello
i use FS10N to see value GL99600.
in year 2009
i have cumulative value 1,587,437,736.05 at end of year 2009
but in year 2010 cumulative value beginning of year = 2,156,975,057.43
why system have different value between 2 year ?
in OB53 my system have 5 GL set for Balance carry forward.
and GL99600 is in one of 5 GL.
you can see picture of year 2009,2010 in link below.
http://www.flickr.com/photos/53547794@N06/4948154682/
http://www.flickr.com/photos/53547794@N06/4948171380/
please help

Hi,
Do once again balance carryforward to fiscal year 2010 in test run mode (select balances in retain acct)so you can able to see the balances to be carryforward.
Check the balances with t.code FAGLB03 instead of FS10N.
Regards,
Sankar

Balance Carry-Forward Problem for Subledger Accounts

Hi Experts,
We are doing the Balance Carry-Forward this Year 2012 and we are having problems with the amount to be carry-over of AP/AR Subledgers for this year. We checked the C/F Balance for G/L and there are no problems.
When I go to tables KNC1 or LFC1, I see items for both years 2011 and 2012 with a Balance Carry-over value. So during my Balance-Carry Over calculation during debug, it gets the value in KNC1 or LFC1 for 2011 then subtracted with the value in KNC1 or LFC1 in 2012. Why is this happening? Supposedly the 2012 entry on KNC1 or LFC1 should not exist yet right?
Also the entry on 2012 C/F Balance should only be under the 2011 Posting as the Document Entry has the Posting Period 12 2011. Right now the Posted Entry is in C/F Balance 2011 and 2012 as well. Is this how the Balance C/F Posting works?
Please enlighten me on how SAP works on this one.
Thank you so much!

Hi,
Why you need to do debugging for F.07?
If you have inconsistancy in your opening bal and closing balances, you can anyhow run the carryforward program again sequentially for 2010, 2011...for GL/AR/AP
Now check closing balance for FY 2011 and compare the same with opening bal of FY 2012.
Regards,
Srinu

Balance Carried Forward problem

Hi Experts,
when running the Ledger for one range of posting period, the customeru2019s line items and cumulative balances are separated into 2 different reconciliation accounts.
While running for the next yearu2019s posting period , the Carry Forward Balances of Customers from previous year are aggregiated into one G/L account ,other account 0 balance is carried forwarded.
My program is fetching from table KNC1 which will have Balance carry forward of the two combined accounts which is going to 1st account.
Please let me know any table or FM where I can get Balance Carry Forward with passing Fiscal Year, Customer Code, GL Account_.( KNC1 table doesn't help in my case)_
Please let me know.
Thanks and Regards,
Kiran.

First look at [Fiscal Year Change Documents|https://websmp105.sap-ag.de/fiscalyearchange]
Then look for those BAPI
- BAPI_AR_ACC_GETCURRENTBALANCE Closing balance of customer account in current fiscal year
- BAPI_AR_ACC_GETKEYDATEBALANCE Customer account balance at a key date
Regards

Customer line items with balance carry forward no opening balance

Hello FI Experts,
We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
Requirement Here Is: The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
Thanks for helping on this issue.

Hi,
Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
If you are checking in the middle of the year, then the balance will not be carry forwarded.
Regards,
B. Radhika.

SEM: BCS Balance Carry Forward - Concept of Period 00

Gurus:
Wants to clear a concept with you. Say for example at the end of Period 12, 2006,
B/S Account 1: $100,000
Retained Earnings: $ 200,000
And only for the Period 1, 2007:
B/S Account 1: $200 (this is a periodic value)
And Net Profit: $15
Now lets assume the Retained Earnings of Current Month = RE Last Month + Net Profit.
Now if we dont do a Balance Carry forward after Period 12 close and before Period 1 close, I will be getting this only for Period 1,
B/S Account 1: $200
Retained Earnings: $15
But if we do a BCF after Period 12 close and before Period 1 close, I will be getting this only for Period 1,
B/S Account 1: $100,200
Retained Earnings: $200,015
So the BCS gets the value in period 00 and in backend add it to period 1 to give a cumulative period 1. Period 00 is a virtual place holder for this and not be available for reporting.
Am I correct?
Thanks for your time spent,
Regards,
Arpan

Thanks Eugene!
I am sure you are correct, but not able to understand the answer for my this question from the thread you mentioned. Was thinking of BCS & period 00 concept and trying to confirm my understanding. Sorry for not able to pick up the loose thread. Still open..
Sincerely,
Arpan

F.07 customer balance carry forward doubts

Hi folks,
i have some concerns about T-code F.07.
1. Can we run this Tcode more than one time for a particular customer account for the same fiscal year? If it's allowed what will happen?
2. For the record in KNC1 table, if we run the F.07 twice, what will happen? will the system created two records, or the second run will update the first run. eg. the first carry forward have the amount 400. and after carry forward this is another invoice posted wit amount 100 with the posting day in the previous fiscal year, so will this 100 carry forward automaticly? or need to run the balance carry forward again for this customer ? and what's the records looks like in table KNC1 for these three phase?
thanks in advance

Mr. Dave,
If after the balance carry forward from the Previous year to the current year (whether AR/AP/GL) and an entry is passed in the previous year... if the balances are not getting updated, what could be the reason.
For example, if a GL Account has a balance of 400 and the balance is carried forward to next year. Then another 100 is passed to the same GL Account but in the previous year. Then according to you (and as per logic), the last year closing balance and the current year opening balance shall become 500. But, after posting this new entry of 100, both the balances remain at 400. and we are again having to do a balance carry forward. What could be the reason for this and how we can avoid this.
Regards
Siddique

G/L Accounts Balance Carried Forward

Hi,
Is there any way to find the G/L Accounts Balance Carried Forward? Tables, Functıon Modules etc...
Thanks!
Best Regards
Beserithan

Hi,
it depends if you are using New GL (available since MysapERP2004).
Carried forward balance is in period 0 in SAP; either GLT0 (Old geneal ledger) od FAGLFLEXT.
If you look at logical database SDF: Old general ledger values are fetched from GLT0, new general ledger values are transfered to GLT0 structure using function 'FAGL_GET_GLT0'.
Regards,
Clemens
Regards,
Clemens

Reg balance Carried forward in F.27 Accounting Statement Print

Hi experts,
We have generated a SAP Script for Accounting Statement print ( F.27 ) for vendors. We have used structure RF140 for
the necessary fields. For balance carried forward, SALDO in RF140 structure( balance in document currency ) gives
me the correct value. But i'm unable to trace whether the balance carried forward is debit or credit. How to check whether
this balance is debit or credit.
Thanks in Advance.
Regards,
Farhanaz.

hi ,
check tcode FK10 might help you.
regards
Prabhu

Balance Carried Forward in Document Currency

Hi, Experts,
In My Customer Account Statement I need the Field in
"Balance Carried Forward in Document Currency"
Present in my Report "Balance Carried Forward in Local Currency"
In this field Having the table KNC1. But in this table "Balance Carried Forward in Document Currency" field is not there i need this field.
Thanks & Regards,
Sreedhar.

Hi,
As long as both the Document and Local currencies are same, the fields
"Balance Carried Forward in Document Currency"
and
"Balance Carried Forward in Local Currency"
are same.
So first check both the currencies are same or different.
check for the WRBTR field in fi Tables LIKE BSID,BSAD this is the doc currency
and the field DMBTR is the local currency field.
reward if useful
regards,
Anji

Balance carry forward at end of page in adobe forms

Hello all,
I am new to adobe forms.
I have a table with data with amount column. when the content of the table flows to next page i need to get balance carry forward and page to total and same at next page top as below
I got to know we need to write script to get this but I don't know script in adobe form.
So kindly help me.
Regards
ujwal

Hi Ujwal,
You're script could be handled something like this:
if(xfa.layout.pageCount() > 1){
var page = xfa.layout.page(this) - 1;
var fields = xfa.layout.pageContent(page, "field");
var total = 0;
for(var i = 0; i < fields.length; i++)
var item = fields.item(i);
if(item.name == "CARRYFORWARD")
total = total + item.rawValue;
this.rawValue = total;
I'm not sure what your technical name for the carry forward value is so I made one up in the sample. Also, I have used this in one form but at line 02 I had to use -2 instead of -1 for my form even though the scripting help gives -1 as an example. This will simply check if there is more than one page and if so then it will look back at the previous page to get the value of any field named CARRYFORWARD.
Regards,
Ryan Crosby

Urgent - "Vendor balances carried forward and line items report."

Hello,
Is there any report which will give me the vendor balance carried forward and the line items during that period.
==============================================
Format-
eg: statement taken from 1.8.2006 to 30.9.2006 is required as
Bal b/f 25000 cr.
3.8.2006 Purchase Inv XXX 3000 cr.
5.9.2006 Payment Chq XX 26000 dr.
Bal c/f 2000 cr.
==============================================
Please advise on this.....
Regards,
J

thanks for the response, but i have already tried those transactions.
FK10N will give me the periodic bal statements and NOT line items display which will also have balance carried forward.
F.41 and F.43 again gives the periodic and line items...but i want the vendor balances to be in the format given above..
like say, account statement.
Please advise............
Regards,
J

Balance carried forward for New GL

Hi Expert,
I would like understand about the balance carried forward for AP and AR in the New GL.
When executing the program in test run mode, user will download the balances and try to tie to the recon accts in trial balance. The openning balance generated by the program should tie to the last fiscal year closing balance. But apparently, it is not. There is a difference. And after checking, the difference seem to the opening balance that aready exist in the new FY.
So, when executing the carried forward program, is the system transferring only the difference ? New posting or items not yet carried forward ?
Thanks.
Angel.

Hi,
FAGLGVTR - Balance Carryforward (New) for GL carry forward
F.07 - Balance Carryforward for AR/AP carry forward
When you execute these programs system will carryforward all closing balance to subsequent year opening balance. Any postings happened in previous year will dynamically carried forward to subsequent year after executing this program. If you find any mismatch, you can again execute this program. It will not create any impact.
Hope this clarifies your doubt.
Best Regards,
Madhu

Migration cockpit of new G/L- balance carry forward

Hi,
I have a question regarding the migration cockpit for new G/L. This a prepaid service of SAP and we are at test stage of migration cockpit. Before migration to new G/L, we have
posted year-end-postings t-code
F_TR_01 for Turkey , program RFSUMB00
for all P&L accounts and balance sheet
accounts for year 2007. Thus, all G/L
accounts give a balance of zero for
year 2007. Among the migration cockpit
activities ,do we still need to
execute transfer balance carry
forward step?
Kind regards,
Gökçen.

Hello Gokcen,
In your case, you can execute the ' Transfer balance carry forward' step of the GL Migration cockpit, for two reasons:
1. Since the migration cockpit moves data consistently from the classic GL database tables to the (New) GL database tables, this step needs to be executed.
2. The cockpit has steps synchronized so that there is no harm in executing a step that may seem redundant. So, better to execute the step than not
Regards,
Sangeeta

Internal Order Residual Balance carry forward.

Hello Team,
I am new dealing with Internal Orders, but I would like some guidance on the following:
1- We created an internal order las year in Nov. 2007, but when I did the balance carry forward it appeares that the residual balance for I/O did not transferred. I noticed that by running report S_ALR_87013019. At the time of a creation of PO the system wll give me a msg of budget exceeded. So how do I Carry forward the residual budget into the new year? the only way I was able to resolve the issue for now is by deactivating the I/O T-code T-code K032 but then this defeats the purpose of I/O
2- How do I set-up tolerance leve for each I/O. I would ilke for user to get a warning 10% before teh budget is about to be exceed and a hard stop 10% after it has ben execeed.
3- How can I configure I/O to send e-mails to managers when budget hits the tolerance level.
Thank You,
Frank F.

Hello and thank you for your reply. But I encoutered the following:
1- I already have budget profile set-up in OKOB
When I went to the menu path that you gave me
(Controlling> Internal Orders> Budgeting and Availability Control-->
Define Tolerance Limits for Availability Control)
Under availability control I only show activate- K030 and deactivate K032. I did not see Define Tolerance Limits for Availabilty control.
So I am still at a stand still. as to how to set-up Tolerance levels and how to assign it to I/O.
but, you answer the e-mail notification, we do not have workflow set-up so it will not work.
Any help will be greatly appreciated.
Regards,
Frank

Query regarding Balance carry forward value in KNC1

Similar Messages

Maybe you are looking for