Query regarding BT having incorrect info

Hi there
Im currently a Sky broadband customer after moving properties im intrested in getting Infinity - when I had my original line activated the BT engineer confirmed that the cabinet im connected to does indeed have fibre hardware - however every checker I put my details in said no.
After having another engineer out a second time to fix a line fault I queried this with him again and he confirmed that the old block of flats that were here before used to be connected to a differnt cabinet and the new flats details havent been upgraded by BT to reflect this. I have checked and found the green cabinet in question too!
How do I go about recifying this? The service im getting with Sky isnt amazing and id obviously like more speed! It will just mean ending the contract with Sky early! Erk - wonder how much that is going to cost!!
Any help appreciated
JC

Thanks for the info Im actually pretty au fait with the technology and its definately a fibre cabinet (sad but ive actually watched the openreach training video http://www.youtube.com/watch?v=53NcsctuxV0)
PMing the mods and seeing what they can do if anything anyway! Just hope the engi wasnt pulling my leg!
Thanks JC

Similar Messages

Query regarding the fields details in particular form for all the users in

Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

Basic query regarding work-area and select query

hi
dear sdn members,
thanks too all for solving all my query's up till now
i am stuck in a problem need help
1) why basically work-area has been used ? the sole purpose
2) different types of select query ? only coding examples
note: no links pls
regards,
virus

hi,
Work Area
Description for a data object that is particularly useful when working with internal tables or database tables as a source for changing operations or a target for reading operations.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table.
With header line
SELECT.
Put the curson on that word and press F1 . You can see the whole documentation for select statements.
select statements :
SELECT result
FROM source
INTO|APPENDING target
[[FOR ALL ENTRIES IN itab] WHERE sql_cond]
Effect
SELECT is an Open-SQL-statement for reading data from one or several database tables into data objects.
The select statement reads a result set (whose structure is determined in result ) from the database tables specified in source, and assigns the data from the result set to the data objects specified in target. You can restrict the result set using the WHERE addition. The addition GROUP BY compresses several database rows into a single row of the result set. The addition HAVING restricts the compressed rows. The addition ORDER BY sorts the result set.
The data objects specified in target must match the result set result. This means that the result set is either assigned to the data objects in one step, or by row, or by packets of rows. In the second and third case, the SELECT statement opens a loop, which which must be closed using ENDSELECT. For every loop pass, the SELECT-statement assigns a row or a packet of rows to the data objects specified in target. If the last row was assigned or if the result set is empty, then SELECT branches to ENDSELECT . A database cursor is opened implicitly to process a SELECT-loop, and is closed again when the loop is ended. You can end the loop using the statements from section leave loops.
Up to the INTO resp. APPENDING addition, the entries in the SELECTstatement define which data should be read by the database in which form. This requirement is translated in the database interface for the database system´s programming interface and is then passed to the database system. The data are read in packets by the database and are transported to the application server by the database server. On the application server, the data are transferred to the ABAP program´s data objects in accordance with the data specified in the INTO and APPENDING additions.
System Fields
The SELECT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Relevance
0 The SELECT statement sets sy-subrc to 0 for every pass by value to an ABAP data object. The ENDSELECT statement sets sy-subrc to 0 if at least one row was transferred in the SELECT loop.
4 The SELECT statement sets sy-subrc to 4 if the result set is empty, that is, if no data was found in the database.
8 The SELECT statement sets sy-subrc to 8 if the FOR UPDATE addition is used in result, without the primary key being specified fully after WHERE.
After every value that is transferred to an ABAP data object, the SELECT statement sets sy-dbcnt to the number of rows that were transferred. If the result set is empty, sy-dbcnt is set to 0.
Notes
Outside classes, you do not need to specify the target area with INTO or APPENDING if a single database table or a single view is specified statically after FROM, and a table work area dbtab was declared with the TABLES statement for the corresponding database table or view. In this case, the system supplements the SELECT-statement implicitly with the addition INTO dbtab.
Although the WHERE-condition is optional, you should always specify it for performance reasons, and the result set should not be restricted on the application server.
SELECT-loops can be nested. For performance reasons, you should check whether a join or a sub-query would be more effective.
Within a SELECT-loop you cannot execute any statements that lead to a database commit and consequently cause the corresponding database cursor to close.
SELECT - result
Syntax
... lines columns ... .
Effect
The data in result defines whether the resulting set consists of multiple rows (table-like structure) or a single row ( flat structure). It specifies the columns to be read and defines their names in the resulting set. Note that column names from the database table can be changed. For single columns, aggregate expressions can be used to specify aggregates. Identical rows in the resulting set can be excluded, and individual rows can be protected from parallel changes by another program.
The data in result consists of data for the rows lines and for the columns columns.
SELECT - lines
Syntax
... { SINGLE }
| { { } } ... .
Alternatives:
1. ... SINGLE
2. ... { }
Effect
The data in lines specifies that the resulting set has either multiple lines or a single line.
Alternative 1
... SINGLE
Effect
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Note
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
Alternative 2
Effect
If SINGLE is not specified and if columns does not contain only aggregate expressions, the resulting set has multiple lines. All database lines that are selected by the remaining additions of the SELECT command are included in the resulting list. If the ORDER BY addition is not used, the order of the lines in the resulting list is not defined and, if the same SELECT command is executed multiple times, the order may be different each time. A data object specified after INTO can be an internal table and the APPENDING addition can be used. If no internal table is specified after INTO or APPENDING, the SELECT command triggers a loop that has to be closed using ENDSELECT.
If multiple lines are read without SINGLE, the DISTINCT addition can be used to exclude duplicate lines from the resulting list. If DISTINCT is used, the SELECT command circumvents SAP buffering. DISTINCT cannot be used in the following situations:
If a column specified in columns has the type STRING, RAWSTRING, LCHAR or LRAW
If the system tries to access pool or cluster tables and single columns are specified in columns.
Note
When specifying DISTINCT, note that you have to carry out sort operations in the database system for this.
SELECT - columns
Syntax
| { {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ... }
| (column_syntax) ... .
Alternatives:
1. ... *
2. ... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
3. ... (column_syntax)
Effect
The input in columns determines which columns are used to build the resulting set.
Alternative 1
Effect
If * is specified, the resulting set is built based on all columns in the database tables or views specified after FROM, in the order given there. The columns in the resulting set take on the name and data type from the database tables or views. Only one data object can be specified after INTO.
Note
If multiple database tables are specified after FROM, you cannot prevent multiple columns from getting the same name when you specify *.
Alternative 2
... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
Effect
A list of column labels col1 col2 ... is specified in order to build the resulting list from individual columns. An individual column can be specified directly or as an argument of an aggregate function aggregate. The order in which the column labels are specified is up to you and defines the order of the columns in the resulting list. Only if a column of the type LCHAR or LRAW is listed does the corresponding length field also have to be specified directly before it. An individual column can be specified multiple times.
The addition AS can be used to define an alternative column name a1 a2 ... with a maximum of fourteen digits in the resulting set for every column label col1 col2 .... The system uses the alternative column name in the additions INTO|APPENDING CORRESPONDING FIELDS and ORDER BY. .
Column labels
The following column labels are possible:
If only a single database table or a single view is specified after FROM, the column labels in the database table - that is, the names of the components comp1 comp2... - can be specified directly for col1 col2 ... in the structure of the ABAP Dictionary.
If the name of the component occurs in multiple database tables of the FROM addition, but the desired database table or the view dbtab is only specified once after FROM, the names dbtab~comp1 dbtab~comp2 ... have to be specified for col1 col2 .... comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
If the desired database table or view occurs multiple times after FROM, the names tabalias~comp1 tabalias~comp2 ... have to be specified for col1 col2 .... tabalias is the alternative table name of the database table or view defined after FROM, and comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
The data type of a single column in the resulting list is the datatype of the corresponding component in the ABAP Dictionary. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note
If multiple database tables are specified after FROM, you can use alternative names when specifying single columns to avoid having multiple columns with the same name.
Example
Read specific columns of a single row.
DATA wa TYPE spfli.
SELECT SINGLE carrid connid cityfrom cityto
INTO CORRESPONDING FIELDS OF wa
FROM spfli
WHERE carrid EQ 'LH' AND connid EQ '0400'.
IF sy-subrc EQ 0.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDIF.
Alternative 3
... (column_syntax)
Effect
Instead of static data, a data object column_syntax in brackets can be specified, which, when the command is executed, either contains the syntax shown with the static data, or is initial. The data object column_syntax can be a character-type data object or an internal table with a character-type data type. The syntax in column_syntax, like in the ABAP editor, is not case-sensitive. When specifying an internal table, you can distribute the syntax over multiple rows.
If column_syntax is initial when the command is executed, columns is implicitly set to * and all columns are read.
If columns are specificied dynamically without the SINGLE addition, the resulting set is always regarded as having multiple rows.
Notes
Before Release 6.10, you could only specify an internal table with a flat character-type row type for column_syntax with a maximum of 72 characters. Also, before Release 6.10, if you used the DISTINCT addition for dynamic access to pool tables or cluster tables, this was ignored, but since release 6.10, this causes a known exception.
If column_syntax is an internal table with header line, the table body and not the header line is evaluated.
Example
Read out how many flights go to and from a city. The SELECT command is implemented only once in a sub-program. The column data, including aggregate function and the data after GROUP BY, is dynamic. Instead of adding the column data to an internal l_columns table, you could just as easily concatenate it in a character-type l_columns field.
PERFORM my_select USING `CITYFROM`.
ULINE.
PERFORM my_select USING `CITYTO`.
FORM my_select USING l_group TYPE string.
DATA: l_columns TYPE TABLE OF string,
l_container TYPE string,
l_count TYPE i.
APPEND l_group TO l_columns.
APPEND `count( * )` TO l_columns.
SELECT (l_columns)
FROM spfli
INTO (l_container, l_count)
GROUP BY (l_group).
WRITE: / l_count, l_container.
ENDSELECT.
ENDFORM.
SELECT - aggregate
Syntax
... { MAX( col )
| MIN( col )
| AVG( col )
| SUM( col )
| COUNT( DISTINCT col )
| COUNT( * )
| count(*) } ... .
Effect
As many of the specified column labels as you like can be listed in the SELECT command as arguments of the above aggregate expression. In aggregate expressions, a single value is calculated from the values of multiple rows in a column as follows (note that the addition DISTINCT excludes double values from the calculation):
MAX( col ) Determines the maximum value of the value in the column col in the resulting set or in the current group.
MIN( col ) Determines the minimum value of the content of the column col in the resulting set or in the current group.
AVG( col ) Determines the average value of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
SUM( col ) Determines the sum of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
COUNT( DISTINCT col ) Determines the number of different values in the column col in the resulting set or in the current group.
COUNT( * ) (or count(*)) Determines the number of rows in the resulting set or in the current group. No column label is specified in this case.
If you are using aggregate expressions, all column labels that are not listed as an argument of an aggregate function are listed after the addition GROUP BY. The aggregate functions evaluate the content of the groups defined by GROUP BY in the database system and transfer the result to the combined rows of the resulting set.
The data type of aggregate expressions with the function MAX, MIN or SUM is the data type of the corresponding column in the ABAP Dictionary. Aggregate expressions with the function AVG have the data type FLTP, and those with COUNT have the data type INT4. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note the following points when using aggregate expressions:
If the addition FOR ALL ENTRIES is used in front of WHERE, or if cluster or pool tables are listed after FROM, no other aggregate expressions apart from COUNT( * ) can be used.
Columns of the type STRING or RAWSTRING cannot be used with aggregate functions.
When aggregate expressions are used, the SELECT command makes it unnecessary to use SAP buffering.
Null values are not included in the calculation for the aggregate functions. The result is a null value only if all the rows in the column in question contain the null value.
If only aggregate expressions are used after SELECT, the results set has one row and the addition GROUP BY is not necessary. If a non-table type target area is specified after INTO, the command ENDSELECT cannot be used together with the addition SINGLE. If the aggregate expression count( * ) is not being used, an internal table can be specified after INTO, and the first row of this table is filled.
If aggregate functions are used without GROUP BY being specified at the same time, the resulting set also contains a row if no data is found in the database. If count( * ) is used, the column in question contains the value 0. The columns in the other aggregate functions contain initial values. This row is assigned to the data object specified after INTO, and unless count( * ) is being used exclusively, sy-subrc is set to 0 and sy-dbcnt is set to 1. If count( *) is used exclusively, the addition INTO can be omitted and if no data can be found in the database, sy-subrc is set to 4 and sy-dbcnt is set to 0.
if helpful reward points

Query regarding Freight

Hi! Gurus,
I am having a query regarding Freight .
Consider PO having 100 Quantity and freight applicable WRT quantity Condition
type FRC1.Rs 1 /1 Quantity.
Freight amount = Rs 100.
Consider 5 Good Receipt WRT purchase order.
GR1- 20 Quantity ,Freight = 20 RS
GR2 -20 Quantity ,Freight = 20 Rs
GR3- 20 Quantity ,Freight = 20 RS
GR4 -20 Quantity ,Freight = 20 Rs
GR5- 20 Quantity ,Freight = 20 RS
Well my question is can i do miro with respect to delivery note(GR1,GR2,GR3,GR4,GR5) wherein i will get only freight amount that i have to pay to vendor
secondly if i do MIRO WRT purchase order ,
I getting 5 GR line items and 1item Rs 100 Freight.
We require 5 GR line item and 5 Freight items.
How this can be done.
Thanks and Regards,
shailesh

If you vendor is sending you a five invoice with each having the freight then post invoice against the delivery note so you will get only that GR qty with freight amount.
but if you get 5 GR and 1 invoice then you can not post separately

Query regarding DB_16k_CACHE_SIZE

Hi Friends,
I have got a urgent query regarding db_16k_cache_size parameter.I have created a tablespace with 16k block size,and i have configured the db_16k_cache_sieze to 208M accordingly.I have kept a table in this tablesspace whose presenet size is 323 GB.Some complex queries will be running on this table comprising groups,some complex joins,ordes,analytical functions etc.
I am having 8 GB of SGA.Now my query is whether i have to increase the db_16k_cache_szie parameter from its present size to get better performance and if it is then how to detemine what will be the optimal size of db_16k_cache_size.
Please help...
Thanks
somy

Post your query what u have tried. Then only we might be help with you

Query regarding regx

Hi,
I have a query regarding regular expression.
what regular expression should I use which matches the following urls
http://www.abc.com/xyz
http://www.abc.com/xyz/abc.htm
http://www.abc.com/xyz/<any thing>
but it should not match
http://www.abc.com/xyz45d
http://www.abc.com/xyz<anything> if(anything does not start with /)
I wrote the regx as : (http://www.abc.com/xyz)(/\w)*
but it also matches the last url.
Thanks
Edited by: JL.Nayak on Jun 26, 2008 9:36 AM

prometheuzz wrote:
kajbj wrote:
No, that's also incorrect.I have always found it a bit odd that people continue to answer questions that already have been answered, and especially if they post an incorrect answer.Usually this can be explained by the fact that there are still some Dukes to be rewarded to the thread in question. That's not the case with this one: odd indeed.But does that mean that you shouldn't read the other replies before you post your reply?
(There must be a rule that says that you aren't allowed to read the other replies if you are posting in a certification thread, another odd thing)

Query regarding updation thru a Procedure

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru my Java application.
The submit procedure saves the XML data in the database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by adding new elements to the same row.This row now contains additional XML elements.
I would like to display the new row with the new elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru
my Java application.
The submit procedure saves the XML data in the
database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by
adding new elements to the same row.This row now
contains additional XML elements.
I would like to display the new row with the new
elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with
the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,If you delete (it seems to me yours this process is regular and frequent) and re insert the new updated one record then High water mark will cause to scan yours table which may cause to degrade the performance.AFAIK you should go with update.But hold down dont implement it as i suggested lets see what are others solution here which may be more precious then mine.
Khurram

A query regarding synchronised functions, using shared object

Hi all.
I have this little query, regarding the functions that are synchronised, based on accessing the lock to the object, which is being used for synchronizing.
Ok, I will clear myself with the following example :
class First
int a;
static int b;
public void func_one()
synchronized((Integer) a)
{ // function logic
} // End of func_one
public void func_two()
synchronized((Integer) b)
{ / function logic
} // End of func_two
public static void func_three()
synchronized((Integer) a)
{ // function logic
} // End of func_three, WHICH IS ACTUALLY NOT ALLOWED,
// just written here for completeness.
public static void func_four()
synchronized((Integer) b)
{ / function logic
} // End of func_four
First obj1 = new First();
First obj2 = new First();
Note that the four functions are different on the following criteria :
a) Whether the function is static or non-static.
b) Whether the object on which synchronization is based is a static, or a non-static member of the class.
Now, first my-thoughts; kindly correct me if I am wrong :
a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisation, since in case obj1 and obj2 happen to call the func_one at the same time, obj1 will obtain lock for obj1.a; and obj2 will obtain lock to obj2.a; and both can go inside the supposed-to-be-synchronized-function-but-actually-is-not merrily.
Kindly correct me I am wrong anywhere in the above.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation.
Kindly correct me I am wrong anywhere in the above.
c) In case 3, we have a static function , synchronized on a non-static object. However, Java does not allow functions of this type, so we may safely move forward.
d) In case 4, we have a static function, synchronized on a static object.
Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation. But we are only partly done for this case.
First, Kindly correct me I am wrong anywhere in the above.
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".
Another query : so far we have been assuming that the only objects contending for the synchronized function are obj1, and obj2, in a single thread. Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.a; and again obj1 trying to obtain lock for obj1.a, which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed. Thus, effectively, our synchronisation is broken.
Or am I being dumb ?
Looking forward to replies..
Ashutosh

a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisationThere is no synchronization between distinct First objects, but that's what you specified. Apart from the coding bug noted below, there would be synchronization between different threads using the same instance of First.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.obj1/2 don't call methods or try to obtain locks. The two different threads do that. And you mean First.b, not obj1.b and obj2.b, but see also below.
d) In case 4, we have a static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.Again, obj1/2 don't call methods or try to obtain locks. The two different threads do that. And again, you mean First.b. obj1.b and obj2.b are the same as First.b. Does that make it clearer?
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".That's what happens in any case whether you write obj1.func_four(), obj2.func)four(), or First.func_four(). All these are identical when func_four(0 is static.
Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.aNo we don't, we have a thread trying to obtain the lock on First.b.
and again obj1 trying to obtain lock for obj1.aYou mean obj2 and First.b, but obj2 doesn't obtain the lock, the thread does.
which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed.Of course it won't. Your reasoning here makes zero sense..Once First.b is locked it is locked. End of story.
Thus, effectively, our synchronisation is broken.No it isn't. The second thread will wait on the same First.b object that the first thread has locked.
However in any case you have a much bigger problem here. You're autoboxing your local 'int' variable to a possibly brand-new Integer object every call, so there may be no synchronization at all.
You need:
Object a = new Object();
static Object b = new Object();

Query regarding the conversion of DME file in MT940 format.

Hello Experts,
I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
I want to convert the DME file (which is generated via F110) from existing format to the standard MT940 format.
Is there any standard program which converts the DME file to MT940. If so, please inform me as early.
I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
Or please inform the steps how i can convert the file .
Awaiting for your inputs.
Thanks in advance

Hi Zareena.
I would like to suggest,
SX_OBJECT_CONVERT_RAW_TXT.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Query regarding Cluster nodes in CC

Hi Experts,
We have a query regarding the cluster nodes available in the CC monitoring.
Can two nodes of a same channel can poll at the same time?
Kindly suggest what should be done to make a specific cluster node of a CC polls at a particular time.
Thanks
Suganya.

Hi,
There is an answered thread on this
Processing in Multiple Cluster Nodes
Regards,
Manjusha

Query regarding G/LAccounts in psoting

Hi Experts,
I have one query regarding PCP0.
After executing PCP0,If We double click on the posting document we can see the number of G/L accounts in that posting Document.If we double click on each G/L Account it shows all the revision information indetail for all payments cumulated into that particular G/L Account.
Some of the G/L's are appearing as single line in the posting document and if we double click for the revision information it is showing all the Wagetypes with personnel numbers and the total of each wagetype.
Some of the G/L's we can see Multiple times for each individual.
Can any one please explain where does we set up the the revision information for the G/L Accounts .
Appreciate If anyone can help to know this information.
Thanks & Regards,
Sandhya.

Hi Gopal,
Counting class are assigned to the Periodic work Schedule 1 to 9 are just arbitart sequence numbers and have no meaning in general they are used for linking Pweriodic Work schedules with differences.
You can use the class for absence and attendance counting to specify different methods of counting according to the period work schedule.
They have no other meaning apart from that.
Thanks and Regards
Swati

Query regarding App V Deployment - (Deploying DriverMSI in App - V)

Hi All,
This is my query regarding deployment of a driver MSI using App V. I have tried sequencing "NMap software" which has Kernel driver as service. I have separated the Kernel driver and wrapped in an MSI and tried deploying the Kernel Driver MSI using
the DeploymentConfig.xml file but its not happening.
I have tried writing script in DeploymentConfig.xml in AddPackage Tag as shown in the below commands where I have added driver MSI in sequenced package, and tried deploying the DeploymentConfig.xml in powershell during Add-Package event but the driver
MSI is not getting installed in Client machine.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
The other way I have tried is writing a vbscript for installing the driver MSI, added the vbs in sequenced package and called the same in DeploymentConfig.xml but no luck.Please find the command below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
Please suggest any method to make this successful or kindly let me know if there is any mistake in the script.
Thanks in advance,
Vivek V

Hi Nicke,
These are the following methods and steps that I have performed for installing Driver MSi.
Method 1:
1. Included the driver MSI in Package Files Tab in sequencer and called the same MSI in DeploymentConfig.xml using the below script.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
2. After the above steps, deployed the AppV package along with DeploymentConfig.xml in App V Client using the commands mentioned below.
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
after trying the above steps the driver MSI is not getting installed.
Method 2:
1. Included the driver MSI and a VBS file(VBS contains script for calling the driverMSI)in Package Files tab in sequencer. Commandlines has been provided calling the vbs file in DeploymetConfig.xml as mentioned below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
2. after executing the above steps, tried deploying the AppV file along with DeploymentConfig.xml using the commands mentioned below,
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
evenafter trying the above methods the driver MSI is not getting installed. Hope you can understand my explanations above.
Regards,
Vivek V

Query regarding Explain Plan

Hi,
I have a query regarding explain plan. While we gather the statistics then optimize choose the best possible plan out of the explain plans available. If we do not gather statistics on a table for a long time then which plan it choose:
If it will continue to use the same plan as it use in the starting when statistics were gathered or will change the plan as soon as dml activities performed and statistics getting old.
Thanks
GK

Hi,
Aman.... wrote:
Gulshan wrote:
Hi,
I have a query regarding explain plan. While we gather the statistics then optimize choose the best possible plan out of the explain plans available. If we do not gather statistics on a table for a long time then which plan it choose:The same plan which it has chosen in the starting with the previous statistics. The plan won't change automatically as long as you won't refresh the statistics. This is wrong even for Oracle 9i. Here are couple of examples when a plan might change with the same optimizer statistics:
* when you have a histogram on a column and are not a bright person to use bind variables, you might get a completely different execution plan because of a different incoming value. All that is needed to fall into this habit - a soft parse, which might be due to different reasons, for instance, due to session parameter modification (which also might change a plan even without a histogram)
* Starting with 10g, CBO makes adjustments to cardinality estimates for out of range values appeared in predicates

Query regarding Useful Life

Hi SAP guru
I have one query regarding useful life of asset,
If i purchased a asset in rs 200000 , wdv rate is 20% and put the useful life 4 year, in last year i want to depreciate the asset upto 1 Rs.
Capitalisation date is 01.04.2008.
Ex -     Acquisition value   Ordinary depreciation net book value
2008 200,000.00               40,000.00-             160,000.00
2009 200,000.00                32,000.00-           128,000.00
2010 200,000.00                25,600.00-           102,400.00
2011   200,000.00               20,480.00-           81,920.00
2012 200,000.00                                          81,920.00
Client requirement is in year 2011 asset should depreciate upto Rs 1.
Appreciate your reply.
Regards
Anjan

If you want to your asset depreciation based on useful life that is 4 years, please select check box Rem.life in multi level method of that dep. key.and enter the useful life as 4 years in the assets master.
when come to restricting value to 1Re. specify the memo value for that asset class.
AA>Valuation>Amt.specification>Specify memo value.

Query regarding BT having incorrect info

Similar Messages

Maybe you are looking for