Query regarding Down payment request

Hi,
can down payment request processed with periodic billing plan? I checked the help.sap.com but there its mentioned with milestone billing plan.No where its mentioned whether its possible t process with periodic billing plan or not?
Only constraint is mentioned down payment request can only be processed with billing plan and for order relevant invoice.
Regards,
Bedayan.

This is a new question related to Down payment request
I have the following scenario.
Please advise on how to implement this process using contracts and sales orders.
Customer buys a warranty contract for a specific period of time say 1 year and pays 100% Down payment
This Down Payment must not be posted to revenue account. It should be posted to Down payment
During contract validity time, free of charge services and spare parts are delivered to customer when a customer has a problem.
When services or spare parts are delivered then post to revenue account. E.g 10% of down payment is posted to revenue. Amount on down payment account is reduced by 10%.
Which type of contract and sales process can be used for this scenario?
Note at the time of closing the contract, the spare parts to be delivered are not known.
Many thanks for your help.
Regards,
MKW

Similar Messages

Help regarded customer down payment request

Hiii Guys, Actually I am facing a error when i run f-37. i.e Customer down payment request against sales order no... its gives a error"Maintain default revenue element in controlling area sfel" i clicked on more nfo.. but it goes to screen or t-code OKEP... actually i m confused in t-code OKEP.. i have create new cost element and revenue element..if yes ?? how ?? i have create a new gl for it? please help .. I am posting a pic of error aslo...
Regards,
Abhay

Hi Abhay
This is answered in forum many times
You need to assign a cost element in OKEP.. If you are using PS module. create a specific GL for the same.. Else, you can assign there any cost element
br. Ajay M

A/p Down Payment Request and A/p Down payment Invoice

hi All,
I am Using SAP B1 2005B
A/p Down Payment Request :-
1.Wnen i want to give a 50% Advance Based on Purchase Order What is the Procedure. whether i have to use A/p Down payemnt request or A/p down payemnt invoice.
2.whenever i am making down payment request there is no JE and There is No GL and BP affected.
2.a. While making payment against down payment request there are 3 accounts hitted
1.Bank Account.
2. Bp(As Advance-Debit balance)
3.GL linked with BP.(Acccounts payable).
Is Correct or Not?
3. While Making A/p Invoice can we pick this Advace in A/p invoice Entry and can we Adjust .
at this stage Whenever i want to Check the balance of the BP should be Debit Balance(as Advance).
A/p Down payment Invoice:-
What is the Procedure, When it will be Used and What are the GL affected.
Thanks & Regards,
yusuff

Hi,
We are using A/p Down Payment Invoice where the entry is
Party Credited
Advance for capital purhase ie. ofset account is debited
and making payment
Party Debited
Bank Credited
and when linking with Invoice
Advance for capital purhase ie. ofset account is credited
GRNI of Asset A/c is debited.
Here the main issue is in Party ledger its showing 1st credit and then debit and your requirement that Party should be shown debit balance it will be not there it will be in Offset account i.e "Advance for capital purhase ie. offset account"
Now you have to generate query base report if you want to show advances given to party.
This is what we are doing if there is any other possibility kindly revert back all experts.
Thanks
Kamlesh

Partial payment for down payment request

Dear All
I have posted a 1000 INR down payment request by F-37. However, the customer only pays me for 700 INR.
If i use F-29 to record the downpayment and try to link this 700 INR to the original down payment request then the system does not allow me to post and gives the message"Posting is only possible with a zero balance; correct document". Also if i click on additional line items the system does not let me create a new downpayment request (Spl GL F) with posting key 09.
Request you to tell me if i can let 300 INR as down payment request and $700 as down payment received agsint the first downpayment request.
Regards,
Siddharth.

Hi Shankar,
I am working on EC 6.0 in case that is relevant.
Agreed that a downpayment request is a noted item and wont affect balances. But when you recieve downpayment against that downpayment request, the system does not let you proceed if there is a difference between the downpayment request and the downpayment.
my query is whether i can post that downpayment w.r.t to the downpayment request and create the residual amount as a new downpayment request.
Thanks for your reply but the problem remains unresolved. Will award you points though

CO Object Assignment Error while posting Down Payment Request

User is raising a Down Payment Request for the purchase of an Asset through a Purchasing Document. This Asset Master has got the cost center and WBS Element assigned in it.
System while saving the DP Request is throwing an error that CO Account Assignments has different Profit Centers
I have also checked the cost center master but the profit center assigned there is correct only. Should I check the OKB9 settings ? If yes, for which GL Account do I need to check ? Where else can I check the CO Object Assignments for profit centers ?
Requirement is critical. Please help.
Thank you
Ravi
9849393564

Hi,
Good evening and greetings,
Please have a look in GGB1 (Profit Centre Substitution), there may be some rule which is overriding the OKB9.
Please reward points if found useful.
Thanking you,
With kindest regards,
Ramesh Padmanabhan

Vendor down payment request over PO value

Hi All,
I have a requirement for vendor down payment request amount compare to PO value checking.
I have PO with total value - 600 USD.
When I create down payment request using F-47, I input amount 1000 USD.
The system never show me any message.
I want the SAP to block me from posting down payment request over PO value.
I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
Anyone can help me, what am I missing here ?
Thanks,

Hi,
You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
Regards,
Amit

Vendor down payment request Error

Hi all,
i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
Kindly help me,
Thanks in advance
Ani Varghese

Hi,
The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
You might not have maintained the GL Accounts for this. Maintained it in OB40.
Regards,
Amit

Vendor Down payment request

Hi,
I have 2 queries regarding vendor down payment request F-47
1) Want to create DPR on header level (We have ECC.6 No enhancement package)
2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
I already active F5 373 message into error.
Thanks,
Farrukh khan

Hi,
You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
You are requested to do create DPR as per below given screen shots
Press Enter
Click on
Hope, this solves your issue.
Regards,
Tejas

Vendor Down Payment Request on WBS (F-47)

Dear Fellows:
I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100 and i create request for 101, system allows it and post the document.
Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
any good solution to it would highly be appreciable.
Regards.

Hi,
The budget availability check is done only against the assigned values and
Following entried does not contribute to the Assigned value
    V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
    D: Delivery
    S: Settlement to object with no budget control
    R: Revenue cost element
    C: Cost element is exempt cost element
    M: Minimum from actual + commitment and plan per order value update
    P: Plan value is not on apportioned order / network
    B: Plan Costing Single Position
    S: Funds Commitment in Balance
So the down payment is not covered for the calculation of the assigned value.
Hence no check is carried out for the Availability check.
hope its useful.
Reward points if useful.
Thanks..

Vendor down payment request to MM purchase order

We want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
Thanks
Martien
Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

Dear Martien,
we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
We are doing a workaround:
We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
If you find a other solution, so please tell me.
Best regards.
Manuel

Down payment request to the purchase order as a whole for f-48

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Actually looking for any screen exit is available for that or any other way.
Regards
RK

Check for FI user exits in this link
http://wiki.sdn.sap.com/wiki/display/ERPFI/UserExitsin+FI
Check also this links
USer Exit / Badi F-47 & F-59
http://wiki.sdn.sap.com/wiki/display/ABAP/Find%2bApplication%2bclass%2bwith%2bExits%2band%2bBadis%2bfor%2ba%2bTransaction
Edited by: Jeyakanthan A on May 25, 2010 1:03 PM

Down payment request to the purchase order as a whole

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Regards
RK

Hi
Actually looking for any screen exit is available for that or any other way
Rgs
RK

Down payment request based on purchase order

Dear all,
How to make down payment request(F-47) based on purchase order(not line item wise) ?,
Currently in F-47 it is asking to enter amounts purchase
order line item wise,because downpayment is made only for entire purchase order value not line item wise.
How to solve this issue ?
Jeyakanthan

Hi,
This is SAP standard functionality. you have to specify line item, though you specify line item system will check for whole PO. and while posting invoice you will get information of the down payment.
Regards,
Raj

Summarizing open items in down payment request from SD

Hello!
We have a sales order with a billing plan, let say, 20% down payment, 80% - final invoice. There are 3 items in the sales order. When creating the down payment request the system creates 1 document with 3 customer lines. We would like to have 1 document with only 1 customer line. Is it possible to summarize customer lines on the down payment request?
OSS note 213852 "Analysis of down payment processing with FI" says that summarization is not possible, but the note was issued in 2002. Were there any updates since then?
Thank you!
Edited by: Anna Strokova on Oct 7, 2008 8:58 PM

Hi Goutham,
I think you should have posted this question to PLM forum i.e. Product Lifecycle Management (PLM). Project System is part of PLM .
Down payment request can not be created automatically from the project structure or milestone in projects.Milestones in projects are used for billing purpose.
You can use transaction f-47 to enter down payment request.
Please refer the link below for down payment request.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/01/a9c78f455711d182b40000e829fbfe/frameset.htm
Hope this helps.
Reward points if you find useful.
Regards
Tushar

A/R Down Payment Request and Cash Flow

Hi All,
is there a way to present down payment requests in standard cash flow reports?
Thanks in advance,
Vangelis Kanellopoulos

Hi Vangelis Kanellopoulos,
Down Payment Request is only a Request. Therefore, it is not linked to cash flow yet. If you want the figure to show in cash flow report, you have to make your own user query report.
Thanks,
Gordon

Query regarding Down payment request

Similar Messages

Maybe you are looking for