Query regarding drill down in Union reports in OBIEE

Hi
I have a report which is the union of two reports coming from difft subject areas.
I have a column A in both the reports.In the union report of these two reports I'm trying to apply drill down on column A.
The drill should take me to another report which is again a union report.
When I click on the drilled value say A1 it doesn't show me data careesponding to A1, but intead of it this drill report gives me data for all the values under A A1,A2 ,A3 etc.
I'm not sure why the drill is not working.
Any special steps to be follwed when applying drill on union reports?
pLs help
thanks in advance !!

Hi,
Refer this ... how to drill down in combine request
hope helps...

Similar Messages

How to setup the drill down on union report

Hi,
I'm setting the union report.
I want to set the drill down to another report.
But I can't setup it.
Would you please tell me how to setup.
Thank you.

Hi Hemlatha
In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
Steps to Add a Text Object over a Subreport
1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
the blank spaces will not maintain its size when it has been published on the Web.
====================
NOTE:
You can format the text object with a hyperlink to another report, another file or a URL.
====================
Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
Regards
Girish

Drill Down on union report

Hi All,
I have created an union report which displays the Daily and Weekly count together. But i am confused on how to give a drill to this report.
The problem i am facing is i need to distinguish between the dail and weekly report. I have creaetd an column as well but when i filter it out conditionally it gives me an error.
Can any one help me in this please
Many thanks in advance.

To drill on a column Go To Column Properties ----- Interaction ---- Primary --- Action Links.
Mark if helps,
Thanks,

Not able to drill down S_ALR_87013558 in reports

Hello Experts,
I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client.
What could be the reason.?
Please suggest.
Thanks,
Kumar Srinivasan

Hi Kumar,
Follow below steps in sequence.
1. Please execute CJE2.
2. Double Click on report 12KST1A. Message will come "You are changing an SAP delivery object". Press the tick mark.
3. On Output Type tab, you must have clicked on radio button "Graphical Report Output". Please change the radio button classical drilldown and check "Available on Selection Screen" at the buttom.
4. Save it.
Check your report again and you will have an option there.
Regards,
Amit

HOW TO ADD DRILL DOWN IN A REPORT

hi
well i want to add drill down in my report....
im unable to find it ....
can you please help me to make a drill down in my report.
thnx and regards
UMAR NAYAB.

hey thnx toronto..
im able to make drill in my report....
now my chart is not changing its data according to drill.....
like my bar chart should also change with the data drilled down....
please help regarding this....
regards.

Drill down in XL Reporter

Hi
Can we have drill down in XL Reporter -Report Organizer
Regards
Farheen

Hi Rekha,
We can user drill down in XL reporter composer and excel . IN rerport composer when you drag a field to the selection criteria then you can drill down by transaction level.
But Report organiser is where all the reports are saved and give a look and feel like windows explorer.
What is your requirement. Post reporting related queries in the reporting forum
[Reporting and Printing;
Regards,
Rakesh N

PIE Chart Drill down in bex report

Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.
Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

Hi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh.

Drill-down into AWR reports

Hi experts,
any can help me in this topic Drill-down into AWR reports.

A typical AWR report - produced in html format- includes its main categories(for example Top 5 timed events) hyperlinked. By clicking on each one , you can navigate to a thorough analysis of all db parameters regarding it......
Anyway....Can you more specific of what exactly do you want...?????
Greetings...
Sim

Drill-down lost in Report Builder

Ever since the CFMX7.02 upgrade, we have lost the ability to
drill-down on the Report Builder reports which previously had
drill-down capability. I am referring to summary lines which
contained a link to the detail. Has anyone experienced this and is
there a fix for it?

Do you choose PDF instead of flash paper as the output
format? By some reason, the drill-down function does not work in
flash paper format.
Good luck,
Daniel

Drill down in webi report

Hi,
Is there any way to display the drill down in webi report. For example:
YearQuarterMonth--Week.......
if the drill the Year option I can able to see all Quarter level measures and if I drill down further I can get into Month level measures and Week level and so on .
But my question is When I drill the Year to Quarter...I want it to display both Year and Quarter and If I drill down further
I want all the measures related to Year ,Quarter, Month and so on
Basically want I need is a tree level hierarchy......Could any one plz help me what all changes I need to make in order to get a detailed report.
Thanks
Sushma
Edited by: Sushma Reddy on Feb 9, 2010 9:44 PM

Hi,
Try to create a Class e.g Time in universe and objects to that class as year, quarter,month as
Year Object -> data type -> D/N
select To_date('sysdate','YYYY) as year from dual
Month object-> data type -> D/N
select to_date)'sysdate','MM') as month from dual;
Quarter -> data type -> D/N
case when @select(Time/Month) in (1,2,3) then q1
         when @select(Time/Month) in (4,5,6) then q2
          when @select(Time/Month) in (7,8,9) then q4
           when @select(Time/Month) in (10,11,12) then q4
endcase
Then create a hierarch in tools -> hiearchy ->custom hierarchy and add the above class there then in any report (Deski/WebI)
you will get the above hierarchy and use it according to your requirement.
Cheers,
Suresh Aluri.

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

Union report in obiee 11g problem

HI,
    I build union report in obiee 11g.In that report i have one column i.e Financial month.I have excluded Financial month column in table view.
    Now my requirement is I have to show results based Financial month at dashboard.For example if i select particular month in dashboard prompt,that month data has to reflect on dashboard.
    For getting results I created one dashboard prompt i.e Financial month and kept 'is prompted' at report level.But am not getting results means if i select any value from Financial month prompt then the report on         dashboard will not reflect.Please help me how to get data based on Financial month.
Regards,
Kumar.

Hi,
you said about writing query in DB.......whether U meant of trying checking the query in toad..or something else..........
Since im giving only one join from dim to fact in the physical diagram........
But more than one join exist between those dim and fact, but im giving only one join mainly the primary key column of the dimension table to the fact table....Whether i need to give all the joins that exist(even if it has 2 or 3 joins between those fact and dim) tables....
If i give count distinct means it is giving count for every nation as 1....like i mentioned below
NATIONALITY<----------------------------------------------------->NATION COUNT
INDIA---------------------------------------------------------------------1
AUS------------------------------------------------------------------------1
CAN------------------------------------------------------------------------1
Since you said to check about depts of the particular column....i couldn't able to understand about "depts" that you meant????
Whether i made any logical mistake...........
thanks,
Harry...
Edited by: HariPrasad on Oct 10, 2010 9:55 PM

Can we apply saved filters to union reports in obiee 11g?

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware of , Please guide me.
Regards
Pranati

I get the same issue. I thought that it's a problem in a security - the catalog pane is clear in a union report. But saved filters work in 11g. I migrated catalog from 10g to 11g and I see saved filters in the conditions. But you may add saved filters directly into xml. Go on Tab Advanced and edit Analysis XML. You have to add code like this
<sawx:expr xsi:type="sawx:savedFilter" path="/shared/FOLDER/_filters/FOLDER/FILTER_NAME" name="FILTER_NAME"/> in a right place.

Drill down ( Collapsible Row ) Report in BEx query designer ?

Dear Friends!
I am supoosed to create a report drill down report for Purchasing History to be precise, I know that we can have drill down feature using heirarchy but is it possible for Us to have PO & PO item heirarachy ? or any other way to do drill down reporting in SAP BEx Query designer ?
like my current report is : -
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Now I am supposed to create a report in which
normal view
| Vendor | Purchasing Organisation | Purchasing Group | Plant | |> PO Number| .... ( keyfigures) | Payment |
drill down or collapsible view ( please consider the heading as data I am not talking about dynamically change of headings ).
| Vendor | Purchasing Organisation | Purchasing Group | Plant | V PO Number | Item | Material / Service | Description | .... ( keyfigures) |
is there anyway to design the report in above mention manner ? you any input will be appreciated greatly.
Thank you so much!
Regards
Naim

Hi Naim,
usually we don't do the transactional data as hierarchy. not sure the reason behind your requirement.
we can do one of the below :-
1. To have the default view as
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
and then user can drill down on rest of the characteristics for detailed view later on.
2. or if they don't want to drill down on characteristics;-
we can build 2 reports , one for header level information and then jump to second query for detailed information(item level) using RRI.
first query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
second query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Let us know if this works out?
Regards,
Sakthi.

Regarding Drill Down Reports...

Hi everybody,
I am doing a drill down for process order.For that i am doing the following code.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
READ TABLE ITAB_CAUFVD_D INDEX SELFIELD-TABINDEX.
CASE SELFIELD-SEL_TAB_FIELD.
    WHEN 'ITAB_CAUFVD_D-AUFNR1'.
      SET PARAMETER ID 'ANR' FIELD ITAB_CAUFVD_D-AUFNR1.
      CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
The problem that i face is : only when i log in to the client & when i run the report for the first time, the drill down is working fine.Otherwise it is not working.Only the first no is coming again & again when i click the other nos.
Regards,
Varadharajan.S

Ok... What is wrong is these 2 statements --
CASE SELFIELD-SEL_TAB_FIELD.
WHEN 'ITAB_CAUFVD_D-AUFNR1'.
I suppose u are doing so to make sure that the user has clicked on Order No field.
If you see in the debug mode and press F5 on CASE Statement you will know the answer.
Instead u must do this --
case selfield-fieldname.
when 'AUFNR'.
It will work fine. I have tried this.
Hope this helps... If it does plz reward points.
Message was edited by:
        Varun Verma

Query regarding drill down in Union reports in OBIEE

Similar Messages

Maybe you are looking for