Query regarding e63 firmwire update

Hi,I have just updated my nokia e63 firmwire.I've some queries regarding the updated firmwire- 1.The download folder is not there anymore in the main menus.Where can I find it?
2.After the update,although the nokia suite restored back the apps and settings back to phone,I can't found the apps which I kept on the memory card,but those downloaded via OVI store(to the card) are still there..
3.The battery seems to be draining a bit faster than usual .Is it firmwire related?
I will be very glad if you help me
version details--Nokia e63(328.04),v510.21.010,RM-437
Nokia E63-1, RM-437, 510.21.010
Nokia C5-00.2,RM-745,091.002

Please help.Any help will be greatly appreciated.
Nokia E63-1, RM-437, 510.21.010
Nokia C5-00.2,RM-745,091.002

Similar Messages

Query regarding hotfix & bam updater service

Using Oracle BPM 10.3 MP2 Enterprise Edition
Version: 10.3.2
Build: #100874.
Hi All,
I have following 2 queries:
1.) Currently we have 6 engines configured in Process Admin, After any hotfix is applied , do we need to re-create the Oracle® BPM Engine EAR of every engine which has been set up.
2.) As per the documentation (http://www.oracle.com/technetwork/middleware/bpm/bpmconfiguringandtroubleshootingbam-132878.pdf)
Under : Configuring BAM Updater Service, its mentioned that “Updater Database Configuration” is the standard JDBC configured and “Runtime Database Configuration” is RemoteJDBC we are using the J2EE Engine.
I am getting OOM Exception in BAM Updater Service logs
Exception 1: bam-dwupdater.log
[<D> 25/04/11 07:21:42] filling workload
[<D> 25/04/11 07:21:42] loading previous snapshot records from [2011-04-25 00:31:45.0]
[<D> 25/04/11 07:21:42] Executing query: [
SELECT ACTIVITYIN, ROLEIN, PARTICIPANTIN, ORIGACTIVITYIN, WAITACTIVITYIN, QUANTITY, AVGTIMETASK, AVGTIMEPROCESS, MEANTIMETASK, MEANTIMEPROCESS ,V_PRODUCT_ID AS V_PRODUCT_ID FROM BAM_WORKLOAD WHERE SNAPSHOTTIME = ?]
[<S> 25/04/11 07:26:32] Workload routine could not be finished. Transaction rolled back.
[<S> 25/04/11 07:26:32] java.lang.OutOfMemoryError
java.lang.OutOfMemoryError
Exception 2: bam-dwupdater.log
[<D> 25/04/11 05:17:12] filling workload
[<D> 25/04/11 05:17:12] loading previous snapshot records from [2011-04-25 00:31:45.0]
[<D> 25/04/11 05:17:12] Executing query: [
SELECT ACTIVITYIN, ROLEIN, PARTICIPANTIN, ORIGACTIVITYIN, WAITACTIVITYIN, QUANTITY, AVGTIMETASK, AVGTIMEPROCESS, MEANTIMETASK, MEANTIMEPROCESS ,V_PRODUCT_ID AS V_PRODUCT_ID FROM BAM_WORKLOAD WHERE SNAPSHOTTIME = ?]
[<S> 25/04/11 05:19:17] Workload routine could not be finished. Transaction rolled back.
[<S> 25/04/11 05:19:20] nativeGetNewTLA
java.lang.OutOfMemoryError: nativeGetNewTLA
     at java.util.HashMap.addEntry(HashMap.java:881)
     at java.util.HashMap.put(HashMap.java:474)
     at fuego.analyzer.WorkloadLoader.getPreviousRecords(WorkloadLoader.java:276)
     at fuego.analyzer.WorkloadLoader.<init>(WorkloadLoader.java:80)
     at fuego.analyzer.DailyWorkloadLoader.<init>(DailyWorkloadLoader.java:35)
     at fuego.analyzer.DailyUpdater.createWorkloadLoader(DailyUpdater.java:130)
     at fuego.analyzer.Updater.fillWorkload(Updater.java:1015)
     at fuego.analyzer.Updater.fillWarehouse(Updater.java:1000)
     at fuego.analyzer.Updater.update(Updater.java:352)
     at fuego.analyzer.DailyUpdater.update(DailyUpdater.java:57)
     at fuego.analyzer.UpdaterRunner.runUpdaterForEngines(UpdaterRunner.java:565)
     at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:395)
Any suggestions / resolution to resolve this
Thanks,
-Sree

Thanks JJ,
One more question.
In Process Admin -> Process Monitoring -> Under Process Data Mart : We have following configurations - :
Data Detail Level -
Snapshot Time -
Update Daily at Time -
I referred http://www.oracle.com/technetwork/middleware/bpm/bpmconfiguringandtroubleshootingbam-132878.pdf but couldn't get much info about these 3 configurations.
Thanks for your time.

Query regarding HRP table updation in EHP4

Hello Experts,
Recently we have upgraded our system to EHP4 and we have done data migration of the E-Recruitment to Career Profile (eg. data migration from HRP9301 to HRP7402 infotype).
The infotype HRP7402 has a field called TABNR at the last and there is an include provided where we have included 2 more essential fields.
But when i am updating the HRP7402 (internal table has the correct data), this TABNR (length 32) is getting filled in the infotype automatically which is fine but it is having leading spaces because of which the remaining 5 characters are being moved the other 2 fields (the fields which are included in the include provided) after this field.
The same TABNR is getting populated perfectly in other infotypes where it is the last field and there are no additonal enhancements done in the standard include provided.
Please let me know on how can i resolve this problem of leading spaces which are automatically getting added up. And I am not clear on where this TABNR is getting filled up in the FM. The following is the code snippet....
        CALL FUNCTION 'RH_INSERT_INFTY'
          EXPORTING
            fcode               = 'INSE'
            vtask               = 'D'
            order_flg           = 'X'
            commit_flg          = 'X'
            authy               = 'X'
            repid               = sy-repid
            form                = 'FILL_DATA'
          TABLES
            innnn               = it_p7402
FORM fill_data TABLES ct_tabinfty_tab
USING ct_infty TYPE any
        ct_tabix TYPE any.
CLEAR ct_tabinfty_tab. REFRESH ct_tabinfty_tab.
ct_tabinfty_tab = ' '.
APPEND ct_tabinfty_tab.
ENDFORM.
Thanks
Raj Kishore

Sorry to intervene here Dhina but that is just halfways correct.
If delivery class NOT = C then it is NOT a customizing table and therefore you wont get any transport request updating or deleting data from it.
But if it is a customizing table then you got to look for the recording routine. You can see this by viewing your table in SE11, then using the menu like following:
utilities->table maintainance generator.
Then look at the info in the bottowm frame. if "standard recording routine" is tagged, then you get a transport request.
If the other option is tagged you wont get it. What again means you can customize this table directly in the system where you need those entries.
why is that?
well assume there is a customizing for e.G. materials, depending on materialnumber. If that table would have a standard recording routine you would need ALL your materials in your development system which would be quite unusual.
Edited by: Florian Kemmer on Jun 9, 2011 2:00 PM
some typos corrected, left some for sure

Query regarding updation thru a Procedure

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru my Java application.
The submit procedure saves the XML data in the database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by adding new elements to the same row.This row now contains additional XML elements.
I would like to display the new row with the new elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru
my Java application.
The submit procedure saves the XML data in the
database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by
adding new elements to the same row.This row now
contains additional XML elements.
I would like to display the new row with the new
elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with
the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,If you delete (it seems to me yours this process is regular and frequent) and re insert the new updated one record then High water mark will cause to scan yours table which may cause to degrade the performance.AFAIK you should go with update.But hold down dont implement it as i suggested lets see what are others solution here which may be more precious then mine.
Khurram

Query regarding updating rows in JTable

Query regarding updating rows in JTable
Hello,
I have a JTable with 6 columns and 1000s of rows (which are data read from flat files)
I can select 1 or more rows and change the values of the
columns. each time I do this I need to update the values
in the flat file.
Currently I assign the updated Jtable values to a vector
Vector rowVector = (Vector)defaultModel.getDataVector();
then I iterate over the vector and compare the values with the (old) data
in the JTable.
            for(int rowCount = 0; rowCount<rowVector.size(); rowCount++){
                Vector v = (Vector)rowVector.elementAt(rowCount);
                    //smsList is the Vector that contains the old JTable values
                    for(int i=0; i<smsList.size(); i++){
                            //If colums values have been changed; add that
                            //vector value to another vector
                            selectedsmsList.add(smsList.get(i));
            for(int i=0; i<selectedsmsList.size(); i++){
                     //Update the values in the flat file
            }This works fine except that it takes ages to iterate over the updated vecor and un-updated,old vector; is there any way to directly get the list of rows that were updated in the jtable; so that I can directly do an I/O operation to update the jtablke values?

Just a suggestion.
You could add a listener and use a vector of booleans to keep track of the rows that have been changed. You could then iterate through this boolean vector and update the changed rows.
See
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#modelchange
Don't know whether this will be helpful.
Regards, Darryl

Query regarding Asset quantity.

Dear Experts,
I have query regarding Asset quantity.
While creating Goods receipt (MIGO) users give the Material (Asset) quantity but when I check in Asset master or in any sap asset reports system not show the quantity in Asset master or any Asset report. Although I have checked in all SAP Standard reports but quantity not updated in any reports. Let me know if I need to do any configure in Asset.
I also want to know that how System posts the quantity automatically in Asset master after doing MIGO/MIRO?
Please provide the best solution.
Best Regards,
Vivek

Hi VIvek
In Asset Master Data update the unit of measure in Quantity field. When you post through a MIRO document or F-90 whatever the quantity input is updated in the asset master record.
Kindly award points if correct

Regarding the Windows Update

Regarding the Windows Update, is this given answers are Right? Thank you :)
Aruna

Hi,
1. In the Group Policy Object Editor, expand Computer Configuration, expand
Administrative Templates, expand Windows Components, and then click
Windows Update.
2. In the details pane, click Specify Intranet Microsoft update service location.
3. Click Enabled and type the HTTP(S) URL of the same WSUS server in the
Set the intranet update service for detecting updates box and in the
Set the intranet statistics server box. For example, type
http(s)://servername in both boxes, where servername is the name of the server. If the port is not 80 for HTTP or 443 for HTTPS, you should add the port number:
https://servername:portnumber.
4. Click OK.
For more information, please read this article:Configure Clients Using Group Policy
https://technet.microsoft.com/en-us/library/cc708574(v=ws.10).aspx
Karen Hu
TechNet Community Support

Query Not reflected with Updated Data

Dear Experts,
I am facing a Problem in query data updation. Data has been daily updating in infoprovider successfully ,But when user run query through Bex he is always shown old data. Then I go to RSRT and generate the query and data got updated.
Every Time for new data updation I need to Generate the query.
What could be reason for this. Is this related to cache data ?
Any Advise .
Thanks in Advance.

Dear Michael,
This problem is coming only for one Multiprovider. Running this program would affect all other queries also . This will Delay the reporting.
Any other reason why query is reflected with old data Though infoprovide is loaded with new data.

A query regarding synchronised functions, using shared object

Hi all.
I have this little query, regarding the functions that are synchronised, based on accessing the lock to the object, which is being used for synchronizing.
Ok, I will clear myself with the following example :
class First
int a;
static int b;
public void func_one()
synchronized((Integer) a)
{ // function logic
} // End of func_one
public void func_two()
synchronized((Integer) b)
{ / function logic
} // End of func_two
public static void func_three()
synchronized((Integer) a)
{ // function logic
} // End of func_three, WHICH IS ACTUALLY NOT ALLOWED,
// just written here for completeness.
public static void func_four()
synchronized((Integer) b)
{ / function logic
} // End of func_four
First obj1 = new First();
First obj2 = new First();
Note that the four functions are different on the following criteria :
a) Whether the function is static or non-static.
b) Whether the object on which synchronization is based is a static, or a non-static member of the class.
Now, first my-thoughts; kindly correct me if I am wrong :
a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisation, since in case obj1 and obj2 happen to call the func_one at the same time, obj1 will obtain lock for obj1.a; and obj2 will obtain lock to obj2.a; and both can go inside the supposed-to-be-synchronized-function-but-actually-is-not merrily.
Kindly correct me I am wrong anywhere in the above.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation.
Kindly correct me I am wrong anywhere in the above.
c) In case 3, we have a static function , synchronized on a non-static object. However, Java does not allow functions of this type, so we may safely move forward.
d) In case 4, we have a static function, synchronized on a static object.
Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation. But we are only partly done for this case.
First, Kindly correct me I am wrong anywhere in the above.
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".
Another query : so far we have been assuming that the only objects contending for the synchronized function are obj1, and obj2, in a single thread. Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.a; and again obj1 trying to obtain lock for obj1.a, which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed. Thus, effectively, our synchronisation is broken.
Or am I being dumb ?
Looking forward to replies..
Ashutosh

a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisationThere is no synchronization between distinct First objects, but that's what you specified. Apart from the coding bug noted below, there would be synchronization between different threads using the same instance of First.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.obj1/2 don't call methods or try to obtain locks. The two different threads do that. And you mean First.b, not obj1.b and obj2.b, but see also below.
d) In case 4, we have a static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.Again, obj1/2 don't call methods or try to obtain locks. The two different threads do that. And again, you mean First.b. obj1.b and obj2.b are the same as First.b. Does that make it clearer?
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".That's what happens in any case whether you write obj1.func_four(), obj2.func)four(), or First.func_four(). All these are identical when func_four(0 is static.
Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.aNo we don't, we have a thread trying to obtain the lock on First.b.
and again obj1 trying to obtain lock for obj1.aYou mean obj2 and First.b, but obj2 doesn't obtain the lock, the thread does.
which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed.Of course it won't. Your reasoning here makes zero sense..Once First.b is locked it is locked. End of story.
Thus, effectively, our synchronisation is broken.No it isn't. The second thread will wait on the same First.b object that the first thread has locked.
However in any case you have a much bigger problem here. You're autoboxing your local 'int' variable to a possibly brand-new Integer object every call, so there may be no synchronization at all.
You need:
Object a = new Object();
static Object b = new Object();

Query regarding the conversion of DME file in MT940 format.

Hello Experts,
I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
I want to convert the DME file (which is generated via F110) from existing format to the standard MT940 format.
Is there any standard program which converts the DME file to MT940. If so, please inform me as early.
I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
Or please inform the steps how i can convert the file .
Awaiting for your inputs.
Thanks in advance

Hi Zareena.
I would like to suggest,
SX_OBJECT_CONVERT_RAW_TXT.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Query regarding Cluster nodes in CC

Hi Experts,
We have a query regarding the cluster nodes available in the CC monitoring.
Can two nodes of a same channel can poll at the same time?
Kindly suggest what should be done to make a specific cluster node of a CC polls at a particular time.
Thanks
Suganya.

Hi,
There is an answered thread on this
Processing in Multiple Cluster Nodes
Regards,
Manjusha

Query regarding G/LAccounts in psoting

Hi Experts,
I have one query regarding PCP0.
After executing PCP0,If We double click on the posting document we can see the number of G/L accounts in that posting Document.If we double click on each G/L Account it shows all the revision information indetail for all payments cumulated into that particular G/L Account.
Some of the G/L's are appearing as single line in the posting document and if we double click for the revision information it is showing all the Wagetypes with personnel numbers and the total of each wagetype.
Some of the G/L's we can see Multiple times for each individual.
Can any one please explain where does we set up the the revision information for the G/L Accounts .
Appreciate If anyone can help to know this information.
Thanks & Regards,
Sandhya.

Hi Gopal,
Counting class are assigned to the Periodic work Schedule 1 to 9 are just arbitart sequence numbers and have no meaning in general they are used for linking Pweriodic Work schedules with differences.
You can use the class for absence and attendance counting to specify different methods of counting according to the period work schedule.
They have no other meaning apart from that.
Thanks and Regards
Swati

Query regarding the fields details in particular form for all the users in

Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

Query regarding App V Deployment - (Deploying DriverMSI in App - V)

Hi All,
This is my query regarding deployment of a driver MSI using App V. I have tried sequencing "NMap software" which has Kernel driver as service. I have separated the Kernel driver and wrapped in an MSI and tried deploying the Kernel Driver MSI using
the DeploymentConfig.xml file but its not happening.
I have tried writing script in DeploymentConfig.xml in AddPackage Tag as shown in the below commands where I have added driver MSI in sequenced package, and tried deploying the DeploymentConfig.xml in powershell during Add-Package event but the driver
MSI is not getting installed in Client machine.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
The other way I have tried is writing a vbscript for installing the driver MSI, added the vbs in sequenced package and called the same in DeploymentConfig.xml but no luck.Please find the command below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
Please suggest any method to make this successful or kindly let me know if there is any mistake in the script.
Thanks in advance,
Vivek V

Hi Nicke,
These are the following methods and steps that I have performed for installing Driver MSi.
Method 1:
1. Included the driver MSI in Package Files Tab in sequencer and called the same MSI in DeploymentConfig.xml using the below script.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
2. After the above steps, deployed the AppV package along with DeploymentConfig.xml in App V Client using the commands mentioned below.
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
after trying the above steps the driver MSI is not getting installed.
Method 2:
1. Included the driver MSI and a VBS file(VBS contains script for calling the driverMSI)in Package Files tab in sequencer. Commandlines has been provided calling the vbs file in DeploymetConfig.xml as mentioned below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
2. after executing the above steps, tried deploying the AppV file along with DeploymentConfig.xml using the commands mentioned below,
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
evenafter trying the above methods the driver MSI is not getting installed. Hope you can understand my explanations above.
Regards,
Vivek V

Query regarding e63 firmwire update

Similar Messages

Maybe you are looking for