Query regarding F4 help on a field in Selection Screen.

Hi all,
I am trying to attach a F4 help on a field in Selection Screen.
The code fragment I wrote for this purpose is:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR m_cbu.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE         = ' '
    retfield               = 'CBU_MANAGER'
PVALKEY                = ' '
   DYNPPROG               = sy-cprog
   DYNPNR                 = sy-dynnr
   DYNPROFIELD            = 'M_CBU'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
   DISPLAY                = 'F'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
tables
    value_tab              = tb_cbu_m
FIELD_TAB              =
    RETURN_TAB             = t_return
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Still, I am unable to get any F4 help?
Please point out the mistake..
Thanks in advance.

Hi Thien,
My entire code is as follows-
TYPES:
      BEGIN OF cbu_m,
      cbu_manager TYPE uname,
      END OF cbu_m.
DATA:
tb_cbu_m            TYPE TABLE OF cbu_m,
wa_cbu_m             TYPE cbu_m.
wa_cbu_m-cbu_manager = '123'.
APPEND wa_cbu_m TO tb_cbu_m.
wa_cbu_m-cbu_manager = '234'.
APPEND wa_cbu_m TO tb_cbu_m.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR m_cbu.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield               = 'CBU_MANAGER'
PVALKEY                = ' '
     dynpprog               = sy-repid
     dynpnr                 = sy-dynnr
     dynprofield            = 'M_CBU'
STEPL                  = 0
   WINDOW_TITLE           = 'ABC'
VALUE                  = ' '
     value_org              = 'S'
MULTIPLE_CHOICE        = ' '
    display                = 'F'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab              = tb_cbu_m
FIELD_TAB              =
     return_tab             = t_return
DYNPFLD_MAPPING        =
EXCEPTIONS
   parameter_error        = 1
   no_values_found        = 2
   OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting the same message "No Values Found"..
Please point out the mistake in my code.

Similar Messages

Creating a search help for a field in selection screen

Hi All,
There are 3 fields in the selection screen. They are
    WERKS
    DATE
    MATNR
Enter a value WERKS = 2465.
When I press the drop down menu for MATNR, it should only give the material number available for 2465.
I think, I should create a search help for it.
Kindly help me to create a search help for the material number based on the above condition.
Thanks in advance.

Hi
i am sending you a sample code where i had implemented a search help
for my req you can understand very easyly and write for ur req
<b>reward if usefull for ur req</b>
TYPES : BEGIN OF ST_OBJID_SH,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
        END OF ST_OBJID_SH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
    SELECT OTYPE OBJID FROM HRP1000
                 INTO TABLE IT_OBJID_SH
                 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
             DDIC_STRUCTURE         = ' '
        RETFIELD               = 'OBJID'
             PVALKEY                = ' '
       DYNPPROG               = SY-REPID
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_OBJID'
             STEPL                  = 0
             WINDOW_TITLE           =
             VALUE                  = ' '
       VALUE_ORG              = 'S'
             MULTIPLE_CHOICE        = ' '
             DISPLAY                = ' '
             CALLBACK_PROGRAM       = ' '
             CALLBACK_FORM          = ' '
             MARK_TAB               =
           IMPORTING
             USER_RESET             =
      TABLES
        VALUE_TAB              = IT_OBJID_SH
             FIELD_TAB              =
             RETURN_TAB             = RETURN_TAB
             DYNPFLD_MAPPING        =
           EXCEPTIONS
             PARAMETER_ERROR        = 1
             NO_VALUES_FOUND        = 2
             OTHERS                 = 3
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.

F4 help on a field on selection-screen called using call selectionn-screen

Hi,
I am calling a selection-screen at runtime using call selection-screen 123.
Now in this selection screen I am taking a parameter thead-tdid as a parameter.
Could anyone tell me how to get the f4 help for this parameter.
Please lemme know..
Thanks in advance..

Hi arup,
1. sample code (just copy paste)
2.
REPORT ABC.
DATA : BEGIN OF ITAB OCCURS 0,
UNAME LIKE USR01-BNAME,
END OF ITAB.
data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .
data : RETURN_wa LIKE DDSHRETVAL .
PARAMETERS : A(12) TYPE C.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR A.
ITAB-UNAME = 'U01'. APPEND ITAB.
ITAB-UNAME = 'U02'. APPEND ITAB.
ITAB-UNAME = 'U03'. APPEND ITAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'ITAB-UNAME'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'A'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
value_tab = ITAB
FIELD_TAB = FTAB
RETURN_TAB = return_tab
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
break-point.
regards,
amit m.

Fill data in 2 fields on selection screen from a search help

Hi,
I have defined a custom search help as given below.
Selection Method : ZTSTCT
Search Help Parameters :
TCODE Importing & Exporting
TTEXT Exporting Only
I have two parameters in my report as declared below:
PARAMETERS : tcode TYPE tstct-tcode MATCHCODE OBJECT zm_tstc,
ttext TYPE tstct-ttext.
Now whenever a user selects any TCODE in the help ZM_TSTC, I need both the fields on the selection screen to be filled with appropriate data. When I tested the search help in SE11, both fields are getting filled with appropriate data but in the report only the field TCODE gets filled. Is there any way to get the other field also filled with the appropriate data ?
Points will be awarded for helpful answers.
Thanks & Regards,
Mukul

Hi,
Use the Event.
AT SELECTION-SCREEN AT tcode.
Use the select query from the method ZTSTCT.
select single TTEXT into ttext from ZTSTCT where TCODE = TCODE.
you will get the value of TTEXT .
Regards,
Balakumar.G.

ABAP Query : Obligatory fields on selection screen!

Hi Experts,
I would like to know the differrent ways through which we can define mandatory fields on selection screen.Options availabel in Infosets (SQ02) as well as Query(SQ01).
Selection Screen:
Document Date in Document: (Mandatory Select-Option)
Plant : (Mandatory Select-Option)
Thanks,
Yogesh

Hi, Everyone .
We can do that .
At selection-screen output (code section 13), set "1" to the field REQUIED by using MODIFY SCREEN code .
(You can get Dynpro number by F1 key or T-cd SE51 )
Masao .
Edited by: MASAO NONAKA on Oct 20, 2008 9:11 AM

How to make required field on selection screen in Query

i'm now working with query(SQ01).
but don't know how to make required field on selection screen in Query.
thanks in advance

i'm now working with query(SQ01).
but don't know how to make required field on selection screen in Query.
thanks in advance

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Validate a field on selection screen based on value entered on anothr field

HI,
There is a program with some fields in selection screen in EWM. The first field is Warehouse. I need to add another field 'Entity to Dispose' in such that what ever value I enter in Warehouse field, its corresponding values should only be displayed as F4 help for 'Entity to Dispose' field.
For eg: If I select the warehouse as 0799(lets say), then the F4 help for Entity to Dispose field should display only the values which are related to warehouse 0799 (and any other values pertaining to other warehouse should not appear).
Could anyone suggest, how this can be achieved?
Thanks in advance.
Regards,
Pavan

Hi,
You can use FM
DYNP_VALUES_READ
DYNP_VALUES_UPDATE
to read the another field value and Using that field build your internal table for f4 values.
and use FM F4IF_INT_TABLE_VALUE_REQUEST for F4 values..
do this on AT SELECTION-SCREEN ON VALUE REQUEST FOR <YOUR_F4_FIELDNAME>.

Unable to have field in selection screen of Infopackage

Hello Gurus,
I have a small problem,
I am unable to bring on field in selection screen in Infopackage,
even thou the object is ticket in DataSources selection option,
I have noted that the object is of type DEC is it something to do with,
Or is their any other way to have this object in selection screen of Infopackage,
Please help me on this,
Thanks & Regards,

Bhanu its field type is DEC thats why its not coming in selection screen in Infopackage .This is a big problem in our Development as this field is SPRIO(Procurement Priority) and we want to restrict this field with conduction SPRIO EQ 1.
Our DataSource is based on Infoset , Bhanu is it possible to restrict this Field in Infoset writing some code. As their is option in Infoset for CODE we tried this but didnt work.
or any other way to restrict this field with 1.
I really appreciate your reply.
Thanks Once again.

Default Current year in select option field on selection Screen

Dear Experts,
I want to set current year as default value in fiscal year select-options field on selection screen.
for this, i hv written following code
DATA:VAR_DATE TYPE SY-DATUM.
DATA VAR(4) TYPE C.
VAR_DATE = SY-DATUM.
VAR = VAR_DATE+0(4).
this retrieves current year .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR..                            "Fiscal Year
SELECTION-SCREEN END OF BLOCK B1.
Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
Regards,
Apoorv Sharma

>
Ganga Bhavani R wrote:
> Use below lines.
>
> SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
> SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
> SELECTION-SCREEN END OF BLOCK B1.
Hi, Ganga,
I think it will not working properly that way, Please test the bellow Sample Code.
TABLES: anlc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS i11 FOR anlc-gjahr .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
IF i11[] IS INITIAL.
    i11-low = sy-datum+0(4).
    APPEND i11.
ENDIF.
Thanks and Regards,
Faisal

Validating field on selection screen

wht is the meaning of validation
how to validate a particular field on selection screen
suppose parameters:p_vkorg like vbak-vkorg.
how to validate p_vkorg.
pz give me coding

Hello pavan,
Validation means "checking whether the input which u are gining to the selection secreen is valid or not". means...
Lets take your example only...
parameters:p_vkorg like vbak-vkorg.
in selection screen you will give inout in that parameter....
users can give any input... lets suppose I'll give input as ABC... which is not in the table VBAK. No need to excute the code once we came to know that the input is not there in the table. So we will do validation like...
at selection-screen on p_vkorg.
select * from vbak where vkorg = p+vkorg. " This is the case with Parameter.
at selection-screen on p_vkorg.
Select * from vbak where vkorg = p+vkorg. " This is the case with Selct-option.
if the input that u r giving is present in the table... the above stmt will execute successfully, otherwise not.
You can make use of System variable SY-SUBRC and you can go ahead with ur coding...
Reward If Helpful
Regards
Sasidhar Reddy Matli.
Message was edited by:
Sasidhar Reddy Matli

Grey out fields in selection screen

experts help needed
i want to display in the selection screen like this
sales org                k918
doc type                 zior
divison                   10
distribution channel    20
file name      /info/ordersinfo/india/incomming/order/order.txt
1) i want all the sales org ,doc type ,division,dis channel to be greyed out in the selection screen
2)file name : the path i have mentioned is the application server path where my text file
order.txt will be there.
this i want the user to type this text and also i need to display this as default value.
i tried like this
parameters : p_file type string default    /info/ordersinfo/india/incomming/order/order.txt.
it is giving error. Please help me how to do this

Hi,
Try like below:parameters : p_file type string default '/info/ordersinfo/india/incomming/order/order.txt.' obligatory.
and then in order to grey out your other fields
at selection-screen output.
Loop at screen.
if screen-name = 'SALES ORG'. <<<Name of the parameter that you have declared
screen-input = 0.
modify screen.
endloop.
Similarly you can do for other fields too.
Regards,
Himanshu

How to add Material type(MTART) field on Selection screen of MB5B transaction code.

Hi All,
    Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
Samadhan

Hi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
    SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
      MATNR-OPTION = 'EQ'.
      MATNR-SIGN = 'I'.
      APPEND MATNR.
      CLEAR MATNR.
    ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula.

Adding the field in selection screen

Hi Guru's,
how can i add the field in selection screen of t code qa33.
can any one help me pls.
Thanks & Best Regards,
Rakhi.

You can enhance the standard program RQEEAL10 using implicit enhancement points.
Click the spiral (Enhance) button (Shift + F4)
Go to Edit -> Enhancement operations -> Show Implicit Enhancement Poitns
Create an Enhancement Implementation and include your code there.
See the following link -> Source Code Enhancements - Part 5 of the Series on the New Enhancement Framework
Hope it helps
Neeraj

How can we place a F4 help in a parameter in selection screen

Hi,
How can we place a F4 help in a parameter in selection screen. Can we do add a Process 0n Value request similar to a module pool prg in stadard report program.
saji

Hello Saji,
Try below attached report.
Regards,
Naimesh.
Reward, if it is useful..!
REPORT ZTEST_NP_1.
DATA: HELPVAL1 LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE .
DATA: VALUE_TAB     LIKE PDTASK-OTEXT OCCURS 2 WITH HEADER LINE.
DATA: VALUE         LIKE FEBMKA-BANKN,
      GIVEN_VALUE   LIKE HELP_INFO-FLDVALUE.
DATA: IT_T005T LIKE T005T OCCURS 0 WITH HEADER LINE,
      IT_T002T LIKE T002T OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK BLK1 WITH FRAME TITLE ABC.
PARAMETERS:       P_SPRAS LIKE T002T-SPRAS,
                  P_LAND1 LIKE T005T-LAND1.
SELECTION-SCREEN: END   OF BLOCK BLK1.
INITIALIZATION.
ABC = 'Selection Criteria:'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LAND1.
PERFORM VALUE_REQUEST_LAND1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_SPRAS.
PERFORM VALUE_REQUEST_SPRAS.
*&      Form VALUE_REQUEST_land1
FORM VALUE_REQUEST_LAND1.
*---- Reading the Screen values.
DATA: LT_DYNPFIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
        LV_DYNAME     LIKE D020S-PROG,
        LV_DYNUMB     LIKE D020S-DNUM.
*-------Append field which you want to read from the screen
LV_DYNAME = SY-REPID.
LV_DYNUMB = SY-DYNNR.
LT_DYNPFIELDS-FIELDNAME = 'P_SPRAS'.
APPEND LT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            DYNAME     = LV_DYNAME
            DYNUMB     = LV_DYNUMB
       TABLES
            DYNPFIELDS = LT_DYNPFIELDS.
SELECT * FROM T005T
         INTO TABLE IT_T005T
         WHERE SPRAS = P_SPRAS.
    REFRESH: HELPVAL1, VALUE_TAB.
    CLEAR:   HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
*---- Append field name for the columns in the help popup
    HELPVAL1-TABNAME    = 'T005T' .
    HELPVAL1-FIELDNAME = 'LAND1' .
    HELPVAL1-SELECTFLAG = 'X' . " will return the value on the screen
    APPEND HELPVAL1 .
    CLEAR HELPVAL1 .
    HELPVAL1-TABNAME    = 'T005T' .
    HELPVAL1-FIELDNAME = 'LANDX' .
    HELPVAL1-SELECTFLAG = ' ' .
    APPEND HELPVAL1 .
    CLEAR HELPVAL1 .
    LOOP AT IT_T005T.
      VALUE_TAB = IT_T005T-LAND1.
      APPEND VALUE_TAB.
      VALUE_TAB = IT_T005T-LANDX.
      APPEND VALUE_TAB.
    ENDLOOP.
    GIVEN_VALUE    = P_LAND1.
    CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
       EXPORTING
            DISPLAY      = SPACE
            GIVEN_VALUE = GIVEN_VALUE
       IMPORTING
            SELECT_VALUE = VALUE
       TABLES
            FIELDS       = HELPVAL1
            VALUETAB     = VALUE_TAB.
    IF NOT VALUE IS INITIAL.
      P_LAND1 = VALUE. " Assing value to the parameter
    ENDIF.
ENDFORM.                    " VALUE_REQUEST_land1
*&      Form VALUE_REQUEST_SPRAS
FORM VALUE_REQUEST_SPRAS.
REFRESH: HELPVAL1, VALUE_TAB.
CLEAR:   HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
HELPVAL1-TABNAME    = 'T002T' .
HELPVAL1-FIELDNAME = 'SPRSL' .
HELPVAL1-SELECTFLAG = 'X' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
HELPVAL1-TABNAME    = 'T002T' .
HELPVAL1-FIELDNAME = 'SPTXT' .
HELPVAL1-SELECTFLAG = ' ' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
SELECT * FROM T002T
         INTO   TABLE IT_T002T
         WHERE SPRAS = SY-LANGU.
LOOP AT IT_T002T.
    VALUE_TAB = IT_T002T-SPRSL.
    APPEND VALUE_TAB.
    VALUE_TAB = IT_T002T-SPTXT.
    APPEND VALUE_TAB.
ENDLOOP.
GIVEN_VALUE    = P_SPRAS.
CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
       EXPORTING
          DISPLAY      = SPACE
          GIVEN_VALUE = GIVEN_VALUE
       IMPORTING
          SELECT_VALUE = VALUE
       TABLES
          FIELDS       = HELPVAL1
          VALUETAB     = VALUE_TAB.
IF NOT VALUE IS INITIAL.
    P_SPRAS = VALUE.
ENDIF.
ENDFORM.                    " VALUE_REQUEST_SPRAS

Query regarding F4 help on a field in Selection Screen.

Similar Messages

Maybe you are looking for