Query regarding Mobility configuration

Hi All,
I have some queries regarding mobility configuration. I have to two WLC's; one Cisco 5508 & another Cisco 4402. My queries are:
1. I have configured both the WLC's in same Mobility domain & same Mobility group but with different Management IP segment. Will they be considered within the same mobility group or they will work as if they are the part of different mobility group?
2. Currently I have 100 AP license on WLC 5508 & 50 AP license on 4402. I am having more than 50 AP's in my network & all are registered with WLC 5508 since it is the primary. I want only selected 50 AP's to register with WLC 4402 in case WLC 5508 goes down. Is there any way I can achieve this?
Regards,
Shahab

1. I have configured both the WLC's in same Mobility domain & same Mobility group but with different Management IP segment. Will they be considered within the same mobility group or they will work as if they are the part of different mobility group?
Yes... As long as there is connectivity between the two WLC and the ports udp 16666 and IP97, the mobility should be up.
2. Currently I have 100 AP license on WLC 5508 & 50 AP license on 4402. I am having more than 50 AP's in my network & all are registered with WLC 5508 since it is the primary. I want only selected 50 AP's to register with WLC 4402 in case WLC 5508 goes down. Is there any way I can achieve this?
Depending on the code in the WLC, you can set the priority to the AP in the high availability. So the 50 AP's you can set them higher than the other 5.
Sent from Cisco Technical Support iPhone App

Similar Messages

Query Regarding Excise Configuration

Hi friends,
I have a query on Excise. Our client is a furniture showroom who stores the items at various locations. Now, he gets the furniture straight from the manufacturer's plant which attract incoming Excise Invoice. Since, he is into trading, at the time of trading, the items have only VAT and not Excise. Now, since the items are purchased and sold, in the item master data, the items are defined as "Purchased" and "Sale Item". Since, it also incoming excise, the "Excisable" checkbox is also checked. Now, whenever, I am making any delivery with this item, SAP B1 is giving a message that an out-going excise invoice needs to be created.
how do we handle these scenarios where the excise is only on the purchase side and not on the sales side?
Bharath S

Hi Bharath,
Outgoing and incoming excise invoice is applicable only for companies liable for excise duty.
From ur explanation, I understand that excise is not applicable to your company.
Hence no need to tick the item as ''excisable'' in item master data.
if u ticked this u have to create incoming excise invoice document.Incoming excise document will pass entries related to excise only.your company need not account for excise seperatly instead load the excise part as cost of the goods itself and calculate only vat/cst.
No need to create excise tax codes and link it into excise accounts.
Create a freight type as excise duty and choose zero tax code in freight form .
try this...
reply me if i'm wrong.
Regards
suresh Kannan

Query regarding the Node manager configuration(WLS and OAM Managed server)

Query regarding the Node manager configuration(WLS and OAM Managed server):
1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
at java.net.ServerSocket.bind(ServerSocket.java:336)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:202)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
3) I have started the NodeManager using the startNodeManager.sh script.
4) The admin server port is 7001 and the oam managed server port is 14100.
Any inputs on what might be wrong in the setup will be helpful.Thanks !

By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.

Query regarding DB_16k_CACHE_SIZE

Hi Friends,
I have got a urgent query regarding db_16k_cache_size parameter.I have created a tablespace with 16k block size,and i have configured the db_16k_cache_sieze to 208M accordingly.I have kept a table in this tablesspace whose presenet size is 323 GB.Some complex queries will be running on this table comprising groups,some complex joins,ordes,analytical functions etc.
I am having 8 GB of SGA.Now my query is whether i have to increase the db_16k_cache_szie parameter from its present size to get better performance and if it is then how to detemine what will be the optimal size of db_16k_cache_size.
Please help...
Thanks
somy

Post your query what u have tried. Then only we might be help with you

Query regarding Crystal Reports Server

Hi,
I am new to Crystal Reports.
I have created a couple of .rpt files using CR2008 and I am loading these report files in my aspx pages using CrystalReportViewer control.
I am planning to host my webApp on IIS in production environment. Maximum simultaneous/concurrent connections to my reports would be 1 or 2.
My question is:
1. Do I need Crystal Reports Server in this scenario?
2. In future if the number of concurrent users to report increases then do I need to go for Crystal Reports Server? Will just buying and installing the Crystal reports server on production server work? or will I have to do some configuration or some other changes in the existing deployed reports? OR Will I have to deploy my existing reports on Crystal Report Server again?
Any help will be highly appreciated.
Thanks in advance,
Manish

Manish, please do not cross post:
Query regarding Crystal Reports Server
See the [Rules of Engagement|http://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for more details.
Marking this thread as answered and locking...
- Ludek

I have query regarding the excersing of LTI in ECM

i have query regarding the excersing of LTI in ECM .Please help and explain the process as well as configuration required

check this help document on LTI configuration process in ECM
Long-Term Incentives - Enterprise Compensation Management - SAP Library

Query regarding Asset quantity.

Dear Experts,
I have query regarding Asset quantity.
While creating Goods receipt (MIGO) users give the Material (Asset) quantity but when I check in Asset master or in any sap asset reports system not show the quantity in Asset master or any Asset report. Although I have checked in all SAP Standard reports but quantity not updated in any reports. Let me know if I need to do any configure in Asset.
I also want to know that how System posts the quantity automatically in Asset master after doing MIGO/MIRO?
Please provide the best solution.
Best Regards,
Vivek

Hi VIvek
In Asset Master Data update the unit of measure in Quantity field. When you post through a MIRO document or F-90 whatever the quantity input is updated in the asset master record.
Kindly award points if correct

Query regarding updation thru a Procedure

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru my Java application.
The submit procedure saves the XML data in the database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by adding new elements to the same row.This row now contains additional XML elements.
I would like to display the new row with the new elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru
my Java application.
The submit procedure saves the XML data in the
database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by
adding new elements to the same row.This row now
contains additional XML elements.
I would like to display the new row with the new
elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with
the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,If you delete (it seems to me yours this process is regular and frequent) and re insert the new updated one record then High water mark will cause to scan yours table which may cause to degrade the performance.AFAIK you should go with update.But hold down dont implement it as i suggested lets see what are others solution here which may be more precious then mine.
Khurram

A query regarding synchronised functions, using shared object

Hi all.
I have this little query, regarding the functions that are synchronised, based on accessing the lock to the object, which is being used for synchronizing.
Ok, I will clear myself with the following example :
class First
int a;
static int b;
public void func_one()
synchronized((Integer) a)
{ // function logic
} // End of func_one
public void func_two()
synchronized((Integer) b)
{ / function logic
} // End of func_two
public static void func_three()
synchronized((Integer) a)
{ // function logic
} // End of func_three, WHICH IS ACTUALLY NOT ALLOWED,
// just written here for completeness.
public static void func_four()
synchronized((Integer) b)
{ / function logic
} // End of func_four
First obj1 = new First();
First obj2 = new First();
Note that the four functions are different on the following criteria :
a) Whether the function is static or non-static.
b) Whether the object on which synchronization is based is a static, or a non-static member of the class.
Now, first my-thoughts; kindly correct me if I am wrong :
a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisation, since in case obj1 and obj2 happen to call the func_one at the same time, obj1 will obtain lock for obj1.a; and obj2 will obtain lock to obj2.a; and both can go inside the supposed-to-be-synchronized-function-but-actually-is-not merrily.
Kindly correct me I am wrong anywhere in the above.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation.
Kindly correct me I am wrong anywhere in the above.
c) In case 3, we have a static function , synchronized on a non-static object. However, Java does not allow functions of this type, so we may safely move forward.
d) In case 4, we have a static function, synchronized on a static object.
Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation. But we are only partly done for this case.
First, Kindly correct me I am wrong anywhere in the above.
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".
Another query : so far we have been assuming that the only objects contending for the synchronized function are obj1, and obj2, in a single thread. Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.a; and again obj1 trying to obtain lock for obj1.a, which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed. Thus, effectively, our synchronisation is broken.
Or am I being dumb ?
Looking forward to replies..
Ashutosh

a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisationThere is no synchronization between distinct First objects, but that's what you specified. Apart from the coding bug noted below, there would be synchronization between different threads using the same instance of First.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.obj1/2 don't call methods or try to obtain locks. The two different threads do that. And you mean First.b, not obj1.b and obj2.b, but see also below.
d) In case 4, we have a static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.Again, obj1/2 don't call methods or try to obtain locks. The two different threads do that. And again, you mean First.b. obj1.b and obj2.b are the same as First.b. Does that make it clearer?
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".That's what happens in any case whether you write obj1.func_four(), obj2.func)four(), or First.func_four(). All these are identical when func_four(0 is static.
Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.aNo we don't, we have a thread trying to obtain the lock on First.b.
and again obj1 trying to obtain lock for obj1.aYou mean obj2 and First.b, but obj2 doesn't obtain the lock, the thread does.
which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed.Of course it won't. Your reasoning here makes zero sense..Once First.b is locked it is locked. End of story.
Thus, effectively, our synchronisation is broken.No it isn't. The second thread will wait on the same First.b object that the first thread has locked.
However in any case you have a much bigger problem here. You're autoboxing your local 'int' variable to a possibly brand-new Integer object every call, so there may be no synchronization at all.
You need:
Object a = new Object();
static Object b = new Object();

Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

Hello Experts,
I follow the flightbooking tutorial to create a Material application to get material list. I can start the agentry server but when I connect to SAP server and get data, I face below issue
Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
My javaBE
[HOST]
server=be1.vdc.csc.com
APPNAME=ZCH_MATERIALLIST
[CLIENT_NUM]
CLIENT=800
[SYSTEM_NUM]
SYSNUM=01
[LOGON_METHOD]
; USER_AUTH if standard UID/Password authentication is used
; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
; (load balancing) is used
LOGON_METHOD=USER_AUTH
[GLOBAL_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
; uses a pool of connections to the SAP backend all utilizing a single
; UID/password
UID=
UPASSWORD=
SHAREDCONNECTION=0
GET_PERSONNEL_INFO=
[SERVICE_LOGON]
ENABLED=true
UID=hngu3
UPASSWORD=xxxxxxx
UPASSWORDENCODED=false
[GROUP_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GROUP
; individual user authentication using an SAP Message Server which distributes
; client connections among a "group" of SAP application servers based on load
; balancing criteria
; host name or IP address of SAP Message Server
MESSAGE_SERVER=
GROUP_NAME=
SYSTEM_ID=
CLIENT=
[LANGUAGE]
LANG=EN
[LOGGING]
Level=4
[REQUIRED_BAPI_WRAPPER]
com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

Hi Tahir, please help me check the log below
Agentry Runtime Worker Thread###throwExceptionToClient::begin |
Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER), |
Agentry Runtime Worker Thread###loggedOut::begin |
Agentry Runtime Worker Thread###HNGU3: SESSION END |
Agentry Runtime Worker Thread###BAPI::begin |
Agentry Runtime Worker Thread###create::nulled repository::created new repository |
Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

Query regarding the conversion of DME file in MT940 format.

Hello Experts,
I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
I want to convert the DME file (which is generated via F110) from existing format to the standard MT940 format.
Is there any standard program which converts the DME file to MT940. If so, please inform me as early.
I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
Or please inform the steps how i can convert the file .
Awaiting for your inputs.
Thanks in advance

Hi Zareena.
I would like to suggest,
SX_OBJECT_CONVERT_RAW_TXT.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Query regarding Cluster nodes in CC

Hi Experts,
We have a query regarding the cluster nodes available in the CC monitoring.
Can two nodes of a same channel can poll at the same time?
Kindly suggest what should be done to make a specific cluster node of a CC polls at a particular time.
Thanks
Suganya.

Hi,
There is an answered thread on this
Processing in Multiple Cluster Nodes
Regards,
Manjusha

Query regarding G/LAccounts in psoting

Hi Experts,
I have one query regarding PCP0.
After executing PCP0,If We double click on the posting document we can see the number of G/L accounts in that posting Document.If we double click on each G/L Account it shows all the revision information indetail for all payments cumulated into that particular G/L Account.
Some of the G/L's are appearing as single line in the posting document and if we double click for the revision information it is showing all the Wagetypes with personnel numbers and the total of each wagetype.
Some of the G/L's we can see Multiple times for each individual.
Can any one please explain where does we set up the the revision information for the G/L Accounts .
Appreciate If anyone can help to know this information.
Thanks & Regards,
Sandhya.

Hi Gopal,
Counting class are assigned to the Periodic work Schedule 1 to 9 are just arbitart sequence numbers and have no meaning in general they are used for linking Pweriodic Work schedules with differences.
You can use the class for absence and attendance counting to specify different methods of counting according to the period work schedule.
They have no other meaning apart from that.
Thanks and Regards
Swati

Query regarding the fields details in particular form for all the users in

Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

Query regarding Mobility configuration

Similar Messages

Maybe you are looking for