Query regarding patch 7461070

Hi,
We are in the process of upgrading from 11.5.10.2 to R12.1.3.
As part of applying patch #7461070 the Readme.txt says customers who are on R12.AD.A version must apply patch 6767273:R12.AD.A.
We have installed R12.1.1 with Upgrade option.
Please let me know if patch 6767273 needs to be applied.
I checked the 11i DB and this patch has not been applied.
Regards,
VN

Please let me know if patch 6767273 needs to be applied.
It needs to be applied unless you have (Patch 7305220, R12.AD.A.DELTA.6) applied since patch 6767273 is included in it.
Thanks,
Hussein

Similar Messages

R12 upgradation : query regarding patch 7461070

I have to apply patch 7461070 as a part of upgradation. It's written in patch note that "must apply critical patch 6767273:R12.AD.A before applying the AD Mini pack". But how to check that instruction are not clear.
FI :
We only have izuprod.txt file under 11i APPL_TOP/admin
$ ls -ltr *prod.txt
-rwxr-xr-x 1 egapc2d appseeg 231650 Oct 30 2004 applprod.txt
-rwx------ 1 egapc2d appseeg 4966 Oct 20 2006 izuprod.txt

Run the query in (How to tell what your current AD patchlevel is. [ID 390671.1], under "Release 12 Single Tier" or "Release 12 Multiple Tiers" section), if you are on (Patch 4502962 - R12.AD.A) then you need to apply (Patch 6767273) before applying (Patch 7461070).
Thanks,
Hussein

Query regarding patches - are they cumulative?

We are in process of upgrading the BI Servers (BIS) and Client Machines (WAS) from BI XI R4.1 SP04+Patch1 To Pach4.
Downloaded Patch4 from SAP Portal is having 3 components (Server, Client, Dashboard) whether all these 3 components are cumulative of Patch1 and intermediate patches released in SP4? If Yes, can we skip the Patch1 installation while upgrading to Patch4?

Hi,
Your question is:
Are Front End patches cumulative (FEP 600 contains 100 through 600) , or do we have to apply them in turn (100, then 200, 300, 400, 500, 600) to get the full effect ?
Yes. latest FEP 600 contain all FEP of previous version patches.
You can apply the FEP it should resolved your issue.
Still you have any issue please check the installation check file if you have any red signal please reinstall FEP then check the issue is persist or not?
Regards,
Venkat

Query regarding patching

OS Windows Server 2003
DB Oracle 10.2.0.1
I am installing patch set 6810189 to base version to upgrade this to 10.2.0.4.
There are three task to be done as part of patch set installation.
Step 1. Preinstallation tasks ( Stopping services of Oracle etc )
Step 2. Patch installation
Step 3. Post installation task ( Running DBUA )
Step 1 & 2 I am able to run successfully, but step 3 is giving some problem.
My query is :-
1. what is the role of running DBUA?
2. It looks like Patch set is installed in Oracle home with the completition of step 2, Is the only role of running DBUA is to upgrade alredy existing running databases under base installation?
3. If we create new databases at this stage then it mean we only need to create new database, we need to run DBUA on top of these newly created database?
In short if old database is unuseful ( Means we can drop old database ) then patchin is copletely successfull at this point & we can go ahead with newly created database after step 2 execution.
Thanks in advance.

DBUA upgrades currently running databases to the installed patch version (10.2.0.4 in your case). If you do not need these databases, you can drop them and create new ones - these will automatically be 10.2.0.4.
HTH
Srini

Error while doing patch 7461070

Hi All,
I am doing EBS upgrade from 11.5.10.2 to R12.1.1 in RHEL 4.7 environment. I am in the process of applying a patch 7461070. It is giving error as mentioned below:-
xdf files are fnd_seed_stage_config.xdf and fnd_seed_stage_entity.xdf
Before applying the patch, i ran adgrants.sql with argument apps.
=====================
adworker2 log says
===================
Sequence APPLSYS.FND_SEED_STAGE_ENTITY_S exists in database.
Sequence(s) in xdf-file & database match. No changes required.
Executing grants on FND_SEED_STAGE_ENTITY_S to APPS
GRANT ALL ON APPLSYS.FND_SEED_STAGE_ENTITY_S TO APPS WITH GRANT OPTION
Exception occured : ORA-06550: line 1, column 8:
PLS-00905: object SYSTEM.AD_INST is invalid
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
java.sql.SQLException: ORA-06550: line 1, column 8:
PLS-00905: object SYSTEM.AD_INST is invalid
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
Synonyms match.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
=================
adworker1 log says
=============
Sequence APPLSYS.FND_SEED_STAGE_CONFIG_S exists in database.
Sequence(s) in xdf-file & database match. No changes required.
Executing grants on FND_SEED_STAGE_CONFIG_S to APPS
GRANT ALL ON APPLSYS.FND_SEED_STAGE_CONFIG_S TO APPS WITH GRANT OPTION
Exception occured : ORA-06550: line 1, column 8:
PLS-00905: object SYSTEM.AD_INST is invalid
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
java.sql.SQLException: ORA-06550: line 1, column 8:
PLS-00905: object SYSTEM.AD_INST is invalid
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
Synonyms match.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
=========================
Please let me know a solution for this.
Thanks,
Mani

Hi;
Please see:
Upgrading 11i to R12.1.1 fails (patch 7461070 fails)
Regard
Helios

11i to R12 upgrade : Unable to merge patch 9179588:R12.AD.B with 9477107:R12.AD.B and patch 7461070:R12.AD.B.1

Hello Sir,
As per readme for Patch 9179588, I am trying to merge patch (9179588:R12.AD.B) with 9477107:R12.AD.B and R12.AD.B.1
(patch 7461070). When I run admrgpch without -admode option, admrgpch completes successfully.
However, when I just add -admode option in same command, getting error that "invalid option -s". Please see below details and suggest since there is Note: This merge should be a full merge using -admode.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>ls -lrt
total 13992
-rw-r--r-- 1 appltest dba 7035668 Aug 03 10:59 p7461070_R12_AIX64-5L.zip
-rw-r--r-- 1 appltest dba 79016 Aug 04 03:48 p9179588_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 38579 Aug 04 05:22 p9477107_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 94 Aug 04 13:27 manifest.txt
drix10:/fmstop/patches/R1211AD/merge>cat manifest.txt
p7461070_R12_AIX64-5L.zip
p9179588_R12.AD.B_R12_GENERIC.zip
p9477107_R12.AD.B_R12_GENERIC.zip
drix10:/fmstop/patches/R1211AD/merge>
drix10:/fmstop/patches/R1211AD/merge>admrgpch -admode -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
Error: Invalid option: -s
usage: admrgpch -help
admrgpch <source_directory> <destination_directory>
admrgpch -s <source_directory> -d <destination_directory>
[-verbose <level>] [-merge_name <pattern>]
[-manifest <filename>] [-logfile <filename>]
where
* -help Print help message.
* -verbose <level> Can be one of: { 0(SILENT),
1(QUIET), 2(VERBOSE) or 3(LOUD) }
Default - 1(QUIET).
* -merge_name <pattern> The name of the merged patch (max 24 characters).
Default - "merged".
* -s <source_directory> Path of source directory where all patches to be
merged have been unzipped.
* -d <destination_directory> Path of destination directory where the merged
patch will be created.
* -manifest <filename> Full pathname of a file containing the list of
patch zip files to be merged.
* -logfile <filename> Admrgpch log file name.
Default:"<CWD>/admrgpch.log".
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Without option -admode :
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 44 files of 876...
10% complete. Copied 88 files of 876...
15% complete. Copied 132 files of 876...
20% complete. Copied 176 files of 876...
25% complete. Copied 219 files of 876...
30% complete. Copied 263 files of 876...
35% complete. Copied 307 files of 876...
40% complete. Copied 351 files of 876...
45% complete. Copied 395 files of 876...
50% complete. Copied 438 files of 876...
55% complete. Copied 482 files of 876...
60% complete. Copied 526 files of 876...
65% complete. Copied 570 files of 876...
70% complete. Copied 614 files of 876...
75% complete. Copied 657 files of 876...
80% complete. Copied 701 files of 876...
85% complete. Copied 745 files of 876...
90% complete. Copied 789 files of 876...
95% complete. Copied 833 files of 876...
100% complete. Copied 876 files of 876...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I am executing admrgpch after sourcing 11i environment and version for admrgpch is :
drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin>adident Header admerge.pl
admerge.pl:
$Header admerge.pl 115.22 2008/09/18 12:12:08 nissubra noship $

Hi Srini,
Thanks a lot !
Actually, I tried that one as well by running admrgpch from newly installed R12 code tree and I got below error.
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>ls -rlt admrgpch
-rwxr-xr-x    1 appltest dba        14293576 Mar 30 2009 admrgpch
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
exec(): 0509-036 Cannot load program ./admrgpch because of the following errors:
        0509-150   Dependent module libnnz10.so could not be loaded.
        0509-022 Cannot load module libnnz10.so.
        0509-026 System error: A file or directory in the path name does not exist.
Then I sourced R12 environment file and ran same command. Its completed successfully.
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 45 files of 883...
10% complete. Copied 89 files of 883...
15% complete. Copied 133 files of 883...
20% complete. Copied 177 files of 883...
25% complete. Copied 221 files of 883...
30% complete. Copied 265 files of 883...
35% complete. Copied 310 files of 883...
40% complete. Copied 354 files of 883...
45% complete. Copied 398 files of 883...
50% complete. Copied 442 files of 883...
55% complete. Copied 486 files of 883...
60% complete. Copied 530 files of 883...
65% complete. Copied 574 files of 883...
70% complete. Copied 619 files of 883...
75% complete. Copied 663 files of 883...
80% complete. Copied 707 files of 883...
85% complete. Copied 751 files of 883...
90% complete. Copied 795 files of 883...
95% complete. Copied 839 files of 883...
100% complete. Copied 883 files of 883...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.

Query regarding updation thru a Procedure

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru my Java application.
The submit procedure saves the XML data in the database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by adding new elements to the same row.This row now contains additional XML elements.
I would like to display the new row with the new elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,

Hi,I have a query regarding updation.
1.I invoke a procedure in Oracle called submit thru
my Java application.
The submit procedure saves the XML data in the
database
and displays this data in a Front End GUI.
2. Now,I make a change in my Java application by
adding new elements to the same row.This row now
contains additional XML elements.
I would like to display the new row with the new
elements in the GUI.
What is a better option for doing the above?
1.Delete the row being shown,save the new row with
the changes in the database,and re display it?
2.Or,Update the row dynamically and refresh?
Any suggestions
Thanks,If you delete (it seems to me yours this process is regular and frequent) and re insert the new updated one record then High water mark will cause to scan yours table which may cause to degrade the performance.AFAIK you should go with update.But hold down dont implement it as i suggested lets see what are others solution here which may be more precious then mine.
Khurram

'not compatible with your current codelines' and 'Patch 7461070'

We are trying to upgrade EBS from 11.5.10.2 to R12.1.1 using Maintenance Wizard v2.15, and we are on "Apply Preinstall Patches" for "Perform the Upgrade". We got some strange errors:
(1). AutoPatch error for "Task: Apply Preinstall Patches":
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'xla' - codeline 'R12.XLA.A'.
Your current on-site codeline for the entity 'xla' is: 'R12.XLA.B'.
for "1-Apply patch 6832389 (Required)", "2-Apply patch 6625757 (Required)", "3-Apply patch 6648785 (Required)", "4-Apply patch 6166150 (Required)", "5-Apply patch 6146757 (Required)", "6-Apply patch 6757123 (Required)", "7-Apply patch 6172183 (Required)", "8-Apply patch 6774040 (Required)", "9-Apply patches 6976563 and 7351384 (Conditionally Required)"
(2). Got patch version mismatch errors when applying patch#7461070 for "10-Apply AD 12.1.1 upgrade driver (Required)":
###############################################################################SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv###############################################################################patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.There is a mismatch between the patch version specified and the releaseversion obtained from your Applications environment. In order to applyRelease 12 patches to previous Applications versions, the patch must be applied in preinstall mode.This can be done by passing the appropriate value to the preinstall parameter of eof_patch12.sh.INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
For first issue:
Verified first 2 patches:
Patch 6832389:R12.AP.A R12: Critical Pre-upgrade for R12
Patch 6625757 6625757:R12.XLA.A
These patches are for 12.0 upgrade, not for 12.1
Why MW is trying to apply these R12.0 patches?
For second issue I found Note 779466.1 Patch 6604842 fails during a R12 Upgrade via Maintenance
Wizard as DB still reports R11i
similar but at 12.0 level.
Shoul all customers follow the workaround and manually apply the patch?

I got similar error:
ACTION: execute on node: apps, patch=7461070, driver=u7461070.drv
patchit12.sh REMOTE SIZE: 53273 LOCAL SIZE: 53273
OK - no update needed for patchit12.sh, same size as on EOF: 53273 bytes.
Found release REL=11.5.10.2 from fnd_product_groups.
WARNING - patchit12.sh has been invoked on a non-R12 Applications system.
SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv
patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.
There is a mismatch between the patch version specified and the release
version obtained from your Applications environment. In order to apply
Release 12 patches to previous Applications versions, the patch must be
applied in preinstall mode.This can be done by passing the appropriate
value to the preinstall parameter of eof_patch12.sh.
INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
Should patch 7461070 be applied manually?

A query regarding synchronised functions, using shared object

Hi all.
I have this little query, regarding the functions that are synchronised, based on accessing the lock to the object, which is being used for synchronizing.
Ok, I will clear myself with the following example :
class First
int a;
static int b;
public void func_one()
synchronized((Integer) a)
{ // function logic
} // End of func_one
public void func_two()
synchronized((Integer) b)
{ / function logic
} // End of func_two
public static void func_three()
synchronized((Integer) a)
{ // function logic
} // End of func_three, WHICH IS ACTUALLY NOT ALLOWED,
// just written here for completeness.
public static void func_four()
synchronized((Integer) b)
{ / function logic
} // End of func_four
First obj1 = new First();
First obj2 = new First();
Note that the four functions are different on the following criteria :
a) Whether the function is static or non-static.
b) Whether the object on which synchronization is based is a static, or a non-static member of the class.
Now, first my-thoughts; kindly correct me if I am wrong :
a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisation, since in case obj1 and obj2 happen to call the func_one at the same time, obj1 will obtain lock for obj1.a; and obj2 will obtain lock to obj2.a; and both can go inside the supposed-to-be-synchronized-function-but-actually-is-not merrily.
Kindly correct me I am wrong anywhere in the above.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation.
Kindly correct me I am wrong anywhere in the above.
c) In case 3, we have a static function , synchronized on a non-static object. However, Java does not allow functions of this type, so we may safely move forward.
d) In case 4, we have a static function, synchronized on a static object.
Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a. However, since obj1.a and obj2.a are the same, thus we will indeed obtain sychronisation. But we are only partly done for this case.
First, Kindly correct me I am wrong anywhere in the above.
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".
Another query : so far we have been assuming that the only objects contending for the synchronized function are obj1, and obj2, in a single thread. Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.a; and again obj1 trying to obtain lock for obj1.a, which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed. Thus, effectively, our synchronisation is broken.
Or am I being dumb ?
Looking forward to replies..
Ashutosh

a) In case 1, we have a non-static function, synchronized on a non-static object. Thus, effectively, there is no-synchronisationThere is no synchronization between distinct First objects, but that's what you specified. Apart from the coding bug noted below, there would be synchronization between different threads using the same instance of First.
b) In case 2, we have a non-static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.obj1/2 don't call methods or try to obtain locks. The two different threads do that. And you mean First.b, not obj1.b and obj2.b, but see also below.
d) In case 4, we have a static function, synchronized on a static object. Here, again if obj1, and obj2 happen to call the function at the same time, obj1 will try to obtain lock for obj1.a; while obj2 will try to obtain lock for obj2.a.Again, obj1/2 don't call methods or try to obtain locks. The two different threads do that. And again, you mean First.b. obj1.b and obj2.b are the same as First.b. Does that make it clearer?
Now, I have a query : what happens if the call is made in a classically static manner, i.e. using the statement "First.func_four;".That's what happens in any case whether you write obj1.func_four(), obj2.func)four(), or First.func_four(). All these are identical when func_four(0 is static.
Now, consider this, suppose we have the same reference obj1, in two threads, and the call "obj1.func_four;" happens to occur at the same time from each of these threads. Thus, we have obj1 rying to obtain lock for obj1.aNo we don't, we have a thread trying to obtain the lock on First.b.
and again obj1 trying to obtain lock for obj1.aYou mean obj2 and First.b, but obj2 doesn't obtain the lock, the thread does.
which are the same locks. So, if obj1.a of the first thread obtains the lock, then it will enter the function no-doubt, but the call from the second thread will also succeed.Of course it won't. Your reasoning here makes zero sense..Once First.b is locked it is locked. End of story.
Thus, effectively, our synchronisation is broken.No it isn't. The second thread will wait on the same First.b object that the first thread has locked.
However in any case you have a much bigger problem here. You're autoboxing your local 'int' variable to a possibly brand-new Integer object every call, so there may be no synchronization at all.
You need:
Object a = new Object();
static Object b = new Object();

Query regarding the conversion of DME file in MT940 format.

Hello Experts,
I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
I want to convert the DME file (which is generated via F110) from existing format to the standard MT940 format.
Is there any standard program which converts the DME file to MT940. If so, please inform me as early.
I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
Or please inform the steps how i can convert the file .
Awaiting for your inputs.
Thanks in advance

Hi Zareena.
I would like to suggest,
SX_OBJECT_CONVERT_RAW_TXT.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Query regarding Cluster nodes in CC

Hi Experts,
We have a query regarding the cluster nodes available in the CC monitoring.
Can two nodes of a same channel can poll at the same time?
Kindly suggest what should be done to make a specific cluster node of a CC polls at a particular time.
Thanks
Suganya.

Hi,
There is an answered thread on this
Processing in Multiple Cluster Nodes
Regards,
Manjusha

Query regarding G/LAccounts in psoting

Hi Experts,
I have one query regarding PCP0.
After executing PCP0,If We double click on the posting document we can see the number of G/L accounts in that posting Document.If we double click on each G/L Account it shows all the revision information indetail for all payments cumulated into that particular G/L Account.
Some of the G/L's are appearing as single line in the posting document and if we double click for the revision information it is showing all the Wagetypes with personnel numbers and the total of each wagetype.
Some of the G/L's we can see Multiple times for each individual.
Can any one please explain where does we set up the the revision information for the G/L Accounts .
Appreciate If anyone can help to know this information.
Thanks & Regards,
Sandhya.

Hi Gopal,
Counting class are assigned to the Periodic work Schedule 1 to 9 are just arbitart sequence numbers and have no meaning in general they are used for linking Pweriodic Work schedules with differences.
You can use the class for absence and attendance counting to specify different methods of counting according to the period work schedule.
They have no other meaning apart from that.
Thanks and Regards
Swati

Query regarding the fields details in particular form for all the users in

Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

Query regarding App V Deployment - (Deploying DriverMSI in App - V)

Hi All,
This is my query regarding deployment of a driver MSI using App V. I have tried sequencing "NMap software" which has Kernel driver as service. I have separated the Kernel driver and wrapped in an MSI and tried deploying the Kernel Driver MSI using
the DeploymentConfig.xml file but its not happening.
I have tried writing script in DeploymentConfig.xml in AddPackage Tag as shown in the below commands where I have added driver MSI in sequenced package, and tried deploying the DeploymentConfig.xml in powershell during Add-Package event but the driver
MSI is not getting installed in Client machine.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
The other way I have tried is writing a vbscript for installing the driver MSI, added the vbs in sequenced package and called the same in DeploymentConfig.xml but no luck.Please find the command below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
Please suggest any method to make this successful or kindly let me know if there is any mistake in the script.
Thanks in advance,
Vivek V

Hi Nicke,
These are the following methods and steps that I have performed for installing Driver MSi.
Method 1:
1. Included the driver MSI in Package Files Tab in sequencer and called the same MSI in DeploymentConfig.xml using the below script.
<AddPackage>
        <Path>msiexec.exe</Path>
        <Arguments>/i Nmap_KernelDriver.msi /qb /l*v c:\windows\system32\LogFiles\Install_Nmap.log</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </AddPackage>
      <RemovePackage>
        <Path>msiexec.exe</Path>
        <Arguments>/x {4BAB3E93-716E-4E18-90F0-1DA3876CBEB6} /qn</Arguments>
        <Wait RollbackOnError="false" Timeout="60"/>
      </RemovePackage>
    </MachineScripts>
2. After the above steps, deployed the AppV package along with DeploymentConfig.xml in App V Client using the commands mentioned below.
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
after trying the above steps the driver MSI is not getting installed.
Method 2:
1. Included the driver MSI and a VBS file(VBS contains script for calling the driverMSI)in Package Files tab in sequencer. Commandlines has been provided calling the vbs file in DeploymetConfig.xml as mentioned below.
<!--
    <MachineScripts>
      <PublishPackage>
        <Path>wscript.exe</Path>
        <Arguments>[{AppVPackageRoot}]\..\Scripts\NMap_Driver_Install.vbs -guid 7c21d1e9-0fc4-4e56-b7bf-49e54d6e523f -name Insecure_Nmap_6.4_APPV</Arguments>
        <Wait RollbackOnError="true" Timeout="30"/>
      </PublishPackage>
      <UnpublishPackage>
        <Path>\\server\share\barfoo.exe</Path>
        <Arguments>-WithArgs</Arguments>
        <Wait RollbackOnError="false" Timeout="30"/>
      </UnpublishPackage>
2. after executing the above steps, tried deploying the AppV file along with DeploymentConfig.xml using the commands mentioned below,
Set-ExecutionPolicy -Unrestricted
Import-module Appvclient
Set-AppVClientConfiguration -EnablePackageScripts 1
Add-AppvClientPackage -Path "Path of the AppV file" -DynamicDeploymentConfig "Path of DeploymentConfig.xml"
evenafter trying the above methods the driver MSI is not getting installed. Hope you can understand my explanations above.
Regards,
Vivek V

Query regarding patch 7461070

Similar Messages

Maybe you are looking for