Query regarding set up of Airport Extreme with Huawei Smart Ax 882

Hello ,
I have an ADSL Modem Huawei SMART AX MT882 and Apple Extreme Base Station (5th Generation)
I would like to set up and configure this combination so that I get both Wired and Wireless connection at home to use a PC, a MacBook pro and other ios devices like iphone,ipad etc.
My query is as follows:
Which one to configure – Huawei Smart Ax MT 882 or Apple Extreme and how?
Can I use the Huawei SmartAx 882 as purely a modem and AEBS as a router? If yes, please advise configuration procedure.
Thanks ,
Souban

wmskaggs, Welcome to the discussion area!
They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station.
That will work with as long as the AirPort Express (AX) is connected via Ethernet. The only other setting you need to make is to configure it to act as a bridge (not sharing a single IP address).
If this one looses connection, then something is wrong with the AX or the Ethernet connection (cable and/or connectors).

Similar Messages

How to set up multiple Airport Extremes with 1 SSID

Equipment:
     Office with 2 floors
     1 Modem
     1 Router
     1 Switch
     5 Airport Extremes (2014 models, each in Bridge mode)
Network layout:
     Modem -> Router -> Switch -> 5 Airport Extremes
Current Setup:
     Each Airport has their own unique SSID (ex. 1st Floor - Conference, 2nd Floor - Content, etc.). Connectivity is fine with this setup, different users join the closest Airport/SSID to them. Only issue is that user needs to switch to different SSID's as they move around the office.
Objective:
     Set each Airport to the same SSID so people don't need to switch to different SSID's as they move around the office.
Problem:
     I attempted to set each Airport to the same SSID. No issues with the setup, everything looks good in Airport Utiltiy. The problem is that some users connect with no issues, but when other users try to connect, they are asked to input a password, which is repeatedly rejected (even though the passwords are set up correctly on all Airport Extremes, and input correctly on all devices).
     I think this has to do with the 50 wireless user limit on the Airport Extremes, it looks like an Airport is maxed out at 50, and when a device tries to connect, it is rejected. I looked for a way to limit the wireless range on each Airport, but no option exists in Airport Utility.

Don't know what kind of main router that you have, but try setting the DHCP Lease Time to 1 hour if it is not already set to that limit.
If it is already set to 1 hour, lower it to the next available setting and update the router.
Then power off the entire network, then power up the main router first, and let it run a few minutes, then start the AirPorts one at a time about a minute apart.

Setting up New Airport Extreme with Verizon Fios Actiontec MI-424-WR Modem

I just purchased the new Airport Extreme to run my network at home. My internet provider is Verizon Fios. With their installs, they use an Actiontec MI424WR modem/router. I would like to disable the router part of the Actiontec and use the AEBS for my router. Any advice on how to accomplish this? Thanks.

ufbrad24, Welcome to the discussion area!
FiOS does not require a modem. The Actiontec device is a router only.
You could replace the Actiontec completely with the AirPort Extreme base station (AEBS). Many have discovered that this can be done by a quick call to Verizon.

New Set up of Airport Extreme with New Macbook and 'Old' Mac Mini

I have wirelessly connected my new Mac Book to Airport Extreme, and have tested the connection by using a shared printer. I have connected my old Mac Mini (OSX 10.3.9) via Wired LAN.The MacMini does not recognise a connection to the Airport Extreme. I would like to share files between the MacBook and the Mini, but they do not 'See' each other. What have I not done correctly?
Mac Mini Mac OS X (10.3.9)

I have checked the IP addresses:
Mac Book nn.n.n.200
Mini nn.n.n.199
Airport nn.n.n.1
Al appear to be valid
A restart did not change anything.
I have been able to Ping each IP address succesfully from each machine, so the only aspect I can't understand is why each machine is not showing when I view the Network in Finder
Mac Mini Mac OS X (10.3.9)

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How can I set up an Airport Extreme as a router, in conjunction with my AT&T modem/router?

I am trying to set up an Airport Extreme as my router, and I am currently using an AT&T modem/router combo. I am wondering what would be the easiest way to do this. Any help would be appreciated. Thanks!

Connect an Ethernet cable from one of the LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme. This cable must remain in place permanently.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac
Click on Other WiFi Devices
Click on AirPort Extreme xxxxx
The utility will take a moment to analyze the connection, then a screen similar to this will appear with your AirPort Extreme instead of an AirPort Express
Type in a short simple name that you want to use for the wireless network
Type in a device name for the AirPort Extreme
Enter a password that will be used for both the AirPort Extreme and wireless network
Verify the password
Click Next
The utility will setup everything for you. When the message of Setup Complete appears, click Done and close AirPort Utility.
The AirPort Extreme wireless network is now available.

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

Set Up Airport Extreme with Static IPs and DHCP same time

I have Verizon Fios to my Business with 5 Static IP Address. One of them must be assigned to the Airport Extreme Base Station. I have 5 iMacs needing internet connection of which 2 need to use a static ip,( Filemaker Server and my Mac OS X Web Server). I also use 2 iPhones with a custom App accessing that FileMaker Server via the internet too. I want to set up my Airport Extreme Base Station to have those 2 iMacs connected with static ips , which must NEVER CHANGE, via an ethernet cable and all the rest wireless with WiFi. Do to the size of my building I also want another Airport Extreme or Express to just expand the range from the Base Station for the wireless connections only. Looking at the Airport Internet Settings I only see 3 options for Connection Sharing, "Share A Public IP Address", "Distribute a range of IP addresses", "Off (Bridge Mode)". I'm thinking I need to give 1 IP Address to the Base Station, 2 ip addresses to my servers, then 1 ip address to share for my wireless DHCP connections. The additional Airport set to Off(Bridge Mode) to expand the base station. Please advise on how I would set up that base station to do this.

With respect to expanding the base stations range, in the Base stations Wireless Settings I would click to select "Allow this network to be extendeded". Then what settings would I need in the Additional Airport?
Note: Both AirPorts would have to be 802.11n models in order for this to work. The additional AirPort would need to be configured to extend the Extreme. (ref: AirPort Utility > Manual Setup > AirPort > Wireless > Wireless Mode = Extend a wireless network)
Would that NEED to be connected to the base station via ethernet cable or will it pick up the base station wirelessly?
Using the "extend" feature is intended to expand the wireless range of an AirPort with another wirelessly. You would not need to connect them by Ethernet. In this configuration, the additional AirPort would be in bridge mode and will pass through the IP information from the other base station's DHCP service.

Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

I think you mean you are replacing your Airport Extreme with a Time Capsule. Time Machine is software integrated into OS X 10.5 & 10.6 used to automatically backup a system to an external HD. Time Capsule is an Airport Extreme that has a hard disk integrated into it that can be used for storage or as a Time Machine backup drive.
Because you are currently on Tiger 10.4.x you can backup to a external HD using SuperDuper or Carbon Copy Cloner. Having a backup is very wise before doing any major system update. After you have created the backup and have successfully upgraded to Snow Leopard you can still use the external HD for many things. The strategy I'd recommend is to use the new Time Capsule as your Time Machine backup and then use the external HD as backup using SuperDuper or CCC. Redundant backups is wise because backups can (and do) fail too! In addition both SD and CCC are bootable clones, this is useful in that if your internal HD crashes you can boot from a cloned drive and continue working until the internal HD is replaced.
Below are some links to some articles from MacWorld, I would recommend reading them where you find a common theme, redundant backups. Backup Plan I, Backup Plan II & Backup Plan III.
Roger

How to set up airport extreme with TPG ADSL2 ?

How to set up airport extreme with TPG ADSL2 ?

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Setting up airPort extreme with arris tm602

Hi, I am not a networking expert so if I ask a silly question please forgive me. I am trying to set up my airport extreme as the main router in my house. I have an airport express as an extender for the second floor. I just upgraded my Internet service and they installed an arris tm602. I connected my a/p extreme and had the double NAT error. Internet Access worked when i chose ignore this but I wasn't happy with this. What I can see happening is that the apple base station was getting a192.168.0.x ip address and anything below that apple gave out the typical 10.x.x.x. And, I had visibility on all my apple devices. I figured this may be slowing my network down. So i tied to fix this. When i fixed this, following instructions by changing to bridge mode the double NAT error is gone but now i have no visibility on my apple devices and everything is on the 192.x.x.x subnet. I want my apple router providing dhcp - Not the arris as now I only get the hex Hardware id of each unit.
Does anyone know how to get the arris to not serve dhcp or getting it to eliminate the NAT error without crashing it? I really want the apple hardware doing their job rather than a third party piece of hardware. I tried to remove the dhcp option and that was a mistake... Any help would be greatly appreciated!

Hi, I am not a networking expert so if I ask a silly question please forgive me. I am trying to set up my airport extreme as the main router in my house. I have an airport express as an extender for the second floor. I just upgraded my Internet service and they installed an arris tm602. I connected my a/p extreme and had the double NAT error. Internet Access worked when i chose ignore this but I wasn't happy with this. What I can see happening is that the apple base station was getting a192.168.0.x ip address and anything below that apple gave out the typical 10.x.x.x. And, I had visibility on all my apple devices. I figured this may be slowing my network down. So i tied to fix this. When i fixed this, following instructions by changing to bridge mode the double NAT error is gone but now i have no visibility on my apple devices and everything is on the 192.x.x.x subnet. I want my apple router providing dhcp - Not the arris as now I only get the hex Hardware id of each unit.
Does anyone know how to get the arris to not serve dhcp or getting it to eliminate the NAT error without crashing it? I really want the apple hardware doing their job rather than a third party piece of hardware. I tried to remove the dhcp option and that was a mistake... Any help would be greatly appreciated!

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

How to connect to dsl airport extreme with built in modem

Hello everybody,
while we were tiding our cellar, i found an old airport extreme (a1034) with a built in modem, but i aint able to connect to my isp.
I looked throug the manual, but i didnt got answers there (maybe because of my poor english) . Is there a tutorial out there which tells me
how to connect to my isp?
Regards Floh
PS: again sorry for my poor english

If you try to set up the new AirPort Extreme with AirPort Utility 5.6.1, you will receive a notice that you need a more up to date version of AirPort Utility.
Nevertheless, AP 5.6.1 will allow you to set up the basics....wireless network name, password, etc.
It will appear that you can change other settings that are not found in more recent versions of AirPort Utility, but if you go in and check using a newer version of AirPort Utility, you will find that the settings that you thought you had made have not "stuck".
For example, you want to change the Radio Mode on the new Extreme and not use the Automatic setting. AP 5.6.1 will appear to let you do this. But, if you check the setting using a more recent version of AirPort Utility you will see that the setting is still set at "Automatic".
So, the bottom line here is that unless the newer version of AirPort Utility has the specific setting that you want to change, you will not be able to make that change.
Is there ANY chance, to set up my new "towers" with more
options, than the current Airport Utilities do offer?
Unfortunately, no.

Configure an older airport extreme with an ipad1

I'm a complete noob regarding wireless. I bought an ipad1 and an older aiport extreme (the white round one) off of ebay and am not sure how to get it all up and running. My Mac Pro does not have a wifi card so I can't use that. I plan to connect the airport to my router via ethernet. I've read that you can't configure an airport extreme with the ipad. What do I need to do to set up the extreme so the ipad can see and use it?
thanks

If the extreme is already configured, can I edit it using the app?
Sure, if AirPort Utility recognizes the AirPort Extreme. Otherwise, you have to perform a Factory Default Reset on the Extreme and start over from scratch
Open AirPort Utility, select the Extreme, and click Manual Setup
Click the Wireless tab below the row of icons to get to the wireless settings.
You want Wireless Mode set to "'Create a wireless network"
Wireless Network Name is your choice
Radio Mode = Automatic or 802.11b/g
Channel =Automatic
Wireless Security = WPA/WPA2 Personal
Password = Your choice
Confirm Password
Click the Internet icon
Click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings.

How do I set up my AirPort Extreme to provide IP addresses without being connected to the Internet?

II'm trying to set up my AirPort Extreme in the field without an Internet connection so that devises can communicate wirelessly but there aren't any IP addresses being generated

Just run the AE in router mode.. if you have difficult with the setup do it completely manually..
This is how I do it.
Airtport Utility can't find Airport Time Capsule on either of my 2009 Macs
As long as the AE is running in DHCP and NAT mode it will produce IP addresses.. however you cannot turn off WAN.
You could give it a static IP .. so set to static instead of dhcp if you like.. eg.
DNS and WAN errors.. double NAT, Ethernet unplugged, etc.. so it makes no real difference..
The AE will function fine as router (Wireless AP) to your network however..
Just ignore all the errors.

Query regarding set up of Airport Extreme with Huawei Smart Ax 882

Similar Messages

Maybe you are looking for