Query regarding the process for SAP TM 9.0 Certification
Hi Team,
I am a SAP TM consultant with an experience of more than 2 years in SAP TM. I would like to take the SAP TM 9.0 certification now.
Could you please let me know the complete details for applying for this certification?
Thanks in advance for the help and for your time.
Thanks & Regards,
Srikanth.
Please see the education website. The certification coverage and prerequisites are here on TM certification:
https://training.sap.com/shop/certification/c_tm_90-sap-certified-application-associate---sap-transportation-management-…
Similar Messages
-
Query regarding the tutorial for Oracle Service Bus (OSB 10gR3)
Hi,
I am working on a tutorial of Oracle Service Bus (OSB 10gR3).
I have created the proxy service and the Business Service, using Oracle Service Bus console.
The details are as follows:
Proxy service: LoanGateway
Business service1: A value of 4.9 or less causes the message to be routed to the ManagerLoanReview business service.
Business service2: A value of 5.0 or greater causes the message to be routed to the NormalLoan business service.
When i send the request message, so that it gets routed from proxy service to one of the business service than it gives following error.
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<exam:processLoanApp xmlns:exam="http://example.org">
<loanRequest xsi:type="java:LoanStruct" xmlns:java="java:normal.client" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!--Optional:-->
<java:Name>Smith</java:Name>
<!--Optional:-->
<java:SSN>1234567</java:SSN>
<!--Optional:-->
<java:Rate>4.1</java:Rate>
<!--Optional:-->
<java:Amount>9000000</java:Amount>
<!--Optional:-->
<java:NumOfYear>10</java:NumOfYear>
<!--Optional:-->
<java:Notes>Manager Loan Application Review Service</java:Notes>
</loanRequest>
</exam:processLoanApp>
</soapenv:Body>
</soapenv:Envelope>
Response Document
The invocation resulted in an error: .
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>
BEA-380002: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380002</con:errorCode>
<con:reason>
Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:metadata>I have the same problem and I'm not able to telnet localhost on port 7021. How can I change this port number I think that port must be 7001, it is correct?Examples server domain is pre-configured for port 7021. The samples domain will have the examples properly deployed in this domain out of box. You dont need to change any thing in {BEA_HOME}\osb_10.3\samples\domains\servicebus\config.
I doubt this has to do something with firewall . Check the last statement in the log after starting the domain.
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.177.242.25:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "mneelapu", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "XYZ-v411-10-177-242-25.oracle.com", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
What are you seeing in your log file?
Edited by: mneelapu on May 19, 2009 9:58 AM -
What is the Learning Process for SAP Business ByDesign
Hi Experts,
What is the Learning Process for SAP Business ByDesign
Prashant KapoorHI prasanth,
SAP-ByD always updated day to day. you can find here:
https://my020062.sapbydesign.com/sap/ap/ui/repository/SAP_BYD_WEKTRA/CP/sapLSUIContentPlayerTestPage.html?manifest=067D03A7602B1D490899DF46B5082089&COMPONENT=A1S_PDI&RELEASE=260&LANGUAGE=en®ION=&INDUSTRY=&TASK=CR_VIEW&sap-language=EN
Note: do u want open the above link u might have a .net framework4.0 bcz this one silverlight application.
Best Regards,
Harish.y -
Query regarding the data type for fetcing records from multiple ODS tables
hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh -
Query regarding the fields details in particular form for all the users in
Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html] -
What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?
Can someone point me to a document that states the official policy stating their maximum review time? This info used to be in the WLK1.6 FAQ but I don't see it for the HCK2.1 suite.
Thanks!
AlIan,
Thanks for your reply. Yes, I'm sure LabVIEW uses the (default) Windows timer. And yes, 1 mS is not guaranteed due to the preemptive nature of Windows (and even "RTOSs" to varying degrees), which is why I see about plus or minus 2 mS.
Apparently the Windows timer can be set by API calls. See: http://www.lucashale.com/timer-resolution/. Here's a screen shot of his TimerResolution.exe on a Windows 7 PC:
Here it is on my Windows XP PC after I set it to "Maximum" (initially it was 15.625 mS):
Notice that it sets the Maximum to less than 1 mS, which is supposed to be the max, so there are some bugs. Plus the Default button does not reset it in XP, but does work on Windows 7 or 8. (I know this is not the place to "debug" non-LabVIEW applications!)
I'll bet LabVIEW sets it, too. The only caveat, as I said, is it looks like another application can change it, since the hardware timer is a "global" timer. I have not seen this issue in my LabVIEW applications, have you?
I guess I need to do some more digging to see the code to set the timer, but it looks like the developers of LabVIEW have it figured it out.
(FYI, I did notice that running my LabVIEW app (which gives about 2 mS resolution) or a C# app, which gives 15.625 mS resolution, does not affect what TimerResolution.exe reports, so I'm not sure if it's really working correctly. If I figure it out I'll post the results.)
Ed -
Query regarding the Node manager configuration(WLS and OAM Managed server)
Query regarding the Node manager configuration(WLS and OAM Managed server):
1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
at java.net.ServerSocket.bind(ServerSocket.java:336)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:202)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
3) I have started the NodeManager using the startNodeManager.sh script.
4) The admin server port is 7001 and the oam managed server port is 14100.
Any inputs on what might be wrong in the setup will be helpful.Thanks !By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.
-
I have query regarding the excersing of LTI in ECM
i have query regarding the excersing of LTI in ECM .Please help and explain the process as well as configuration required
check this help document on LTI configuration process in ECM
Long-Term Incentives - Enterprise Compensation Management - SAP Library -
Validate the data for SAP system
How do you validate the data for SAP receiver system (RFC or IDOC adapter)?
It is necessary to recognize does exists reference object or does field has the right value.
Do you validate it in BPM or you handle application/technical acnowlegment? Or Messaging monitoring is enough for your requirements.
In case of ABAP Proxy will it enough to catch Fault Message in order to define what happens?Hi,
there are two different kinds of validations:
syntactical validation (length and data types of fields etc.) and semantical validations (correct customer in order, allowed number range etc.)
From a theoretical point of view, only the first kind should be carried out in XI, all semantical validations should be part of the backend inbound processing. And indeed for IDocs and RFCs you will get according error messages in the backend. If you call proxies, you will need to code that yourself.
In General i'd implement syntactical validations in XI, if more a necessary then XI already carries out (e.g. mandatory fields filled). For data validations i would rely on the backend, meaning for IDocs you should look into using ALEAUD IDoc, which will return any error messages during IDoc inbound processing. For RFCs you can have Exceptions defined which will translate to a negative application ACK.
Regards
Christine -
Error in the configuration for sap logon tickets
Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
<b>Error in the configuration for SAP logon tickets</b>
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
ShridharYou will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren. -
Query regarding the conversion of DME file in MT940 format.
Hello Experts,
I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
I want to convert the DME file (which is generated via F110) from existing format to the standard MT940 format.
Is there any standard program which converts the DME file to MT940. If so, please inform me as early.
I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
Or please inform the steps how i can convert the file .
Awaiting for your inputs.
Thanks in advanceHi Zareena.
I would like to suggest,
SX_OBJECT_CONVERT_RAW_TXT.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave -
Can you Please Tell Me the Process for service/operation provide by one plant to other plant.
In My Company No Of Plants Like 1000,2000,3000,4000
Plant 1000 Provide the service/operation like (welding ,cutting, painting ) to other plants (eg 2000,3000,4000)
We want to give the profit for plant 1000 and book the service or operation charge in plant 2000 or 3000.
We don’t want to use material code in this process.
Can you help me it is possible or not through SAP PP.Krishnendu,
Actually in my company we have one plant 1000 that plant provide the service like (CUTTING (SHAFT),WELDING,MACHINING,PAINTING)
actually plant already made one material xyz and supply 2000 plant .
we can use STO in this scenario and set special procurement key 80.
But my requirement is after some time plant 1000 provide few operation in xyz material that material already supply to 2000 plant.
in this case we dont use to produce any material. -
Can I know what is the process for us to do Good Return from customer?
Can I know what is the process for us to do Good Return from customer?
hi
this ques need to be posted in sd forum..
to answer this u can use order type RE to create Return order and then u can do the goods receipt..
or u can use the process mentioned in first reply.
regards
CMM -
What is the Pass % for SAP Netweaver C_TADM51_70 Certification this Yea
Hi,
can someone Help me to know What is the Pass % for SAP Netweaver C_TADM51_70 Certification @ teched this Year.
We need to achieve the pass Critieria in Individual Sections or We need to Achieve the Pass Critieria / Marks in Overall all sections ?
Please Confirm the Pass% 55% or 60% or 80% etc..
Also Will be greatful if someone can give more information on this...
Thanks in Advance
Rgs
Dan.Hi,
Pass percentage(SAP Teched) = 60%
Pass percentage(Individual) = 70%
Any I advise you to call up SAP education partner to confirm the same..
Regards
Thilip Kumar -
What is the process for reinstalling my product to a new laptop?
Hello,
I purchased Adobe Acrobat Professional version 9 Win on Dec 2, 2011.It was installed in my old laptop and now want install it in my new laptop. How to go about this, just want to know the process for re installation. Is the installation restricted to only one laptop?
Thanks.
HonoryHi honorary2009_mangi,
You need to deactivate the software from the older machine before installing it on the new machine else it will increase the activation count.
To deactivate the software you need to launch Acrobat, go to 'Help' menu and select 'Deactivate'
Please refer : Activation & Deactivation Help
As per the End User License Agreement (EULA), a retail license is good to be installed on 2 computers.
Regards,
Rave
Maybe you are looking for
-
"Error: Windows 7 Build 7601 This copy of Windows is not genuine" keeps popping up
hi, we have recently been getting the windows not geuine message and our desktop has gone black,it says that we should activat windows but the avtivation code has worn off the sticker at the bottom of our g550. hope you can help
-
How to add Java projects to FlexBuilder2?
In a recent Breezinar about Flex Data Services James Ward demonstrated how to to debug a Flex2/Java application by simultaneously setting breakpoints in both the ActionScript client and in the Java server from within the same instance of Flex Builder
-
I965, 3 monitors. xrandr: unable to configure ctc2, Xorg: invalid 22
Hello! Firstly, thankyou for your time if you're reading this question. I got one out of two external monitors working by connecting it via a VGA cable, and using xrandr, and I was hoping to be able to get the other one working using a DVI (monitor e
-
Runtime Error upon posting Goods Receipt: CONVT_OVERFLOW
Hi Experts, My user is encountering this error when she tried to define the delivery amount or qty.. and post it. Well last time, she was able to post a GR. The only thing I did was to define a TIN# in Maintenance of Additional Details for Company Co
-
Buglet in Image Processor.jsx
I'm not sure how to report this, but there's a bug in the Image Processor script that was driving me nuts so I figured out how to patch it. This may be a Windows-only bug (I'm not sure). The problem is that the when you bring up either of the directo