Query Related to Addition Of Customer Specific Tab in Material Master
Hi Experts,
we had a requirement from our client to add certain specific fields in Material Master. we added all those fields in a "User Tab" created by copying "Basic Data Tab" & it's attributes in SPRO. After this was done the transaction was running fine but when we want to migrate to another tab say "Basic Data Tab" we are not able to do so as we are still on the same User Tab.
Please help me on this <removed by moderator>.
<removed by moderator>
Thanks & Regards
Priyesh Shah
Edited by: Thomas Zloch on Jun 29, 2011 11:06 PM - urgency reduced, please do not offer ...
Thanks for your reply.
I would like to know am using strategy 52 for this FG, so that i can have option to procure order specific components after sales order arrival, and components which are not specific to the order can be procured before sales order arrival. Where am confused is if am planning with FG1 i.e. am entering PIR for FG1 and am procuring order independent components before sales order arrival and suppose if the sales order arrives for FG2 for which components i have procured before sales order arrival is same but the remaining components which are order specific are different from that of FG1, then how the MRP shall behave. How the requirement for the FG2 shall be met. Kindly throw some light on this scenario.
Expecting a positive and prompt response.
Regards,
J K Tharwani
Similar Messages
-
Do we actually need specification tab besides label tab in material master
After designing template and all , the preview is not showing all the portion of the template .I have assigned material in the material assignment tab in specification workbench . When I was trying to print I use the same material and started the preview but it is not showing all ,only 1/5th of top portion is being displayed . I have not set up specification tab in material master
Dear M D
no clue waht you have done and what your problem might be, I can inly imagine. Therefore:
If you would like to print a label in GLM transaction you need a material; the material must be linked to a specifiacioin, the specification should hav e suitable genvar/language combination released and you need to have prepared LabelView. If oyu have done itr like that the "LabelDetermintation" can run.
Check:
What is a "Label" and how support SAP EHS Management "Labeling"
SAP EHS Management for Beginners
C.B. -
Specific Field in Material Master
Hi All,
just some user can't see specific Field in Material Master with using MM03, but others people can. Where should I change settings? Is it something to do with authorization?
thank®ards>
Jiami wrote:
> Hi Biju, Pete
>
>
> thanks for Support.
>
>
> Material is created as ( Industry Sector: mechanical engineering
> Material Type: Trading goods)
> Field name: Basic material (in Tab Basis Data 2).
>
>
> user can see Field now,
> but just When we using MM03 in normal level, the Field will be displayed.
> But after we given a plant, in Plan lever then we can not see this Field anymore in Tab basis Data 2.
>
>
> thanks
>
> Jia
execute OMSR,
position on field MARA-WRKST
click the button field selection right of selection group
you will now see which fields are assigned to the group
and below you see in in which field reference the group is set to hidden.
field reference is a multi usage, it can be for material type, for transaction, for industry .
so you have to check at least the settings for your material, for the transaction where you get this effect and for the industry you material is created with.
further there is a customizing transaction OMSA, which is plant specific field selection, and I guess that causes your effect.
open it and see which selection group is assigned to it.
then go back to OMSR and see what status is assigned to this field reference. -
Foreign Trade Import/Export Tab in Material Master of SAP R/3
Hi
What is the use of Foreign Trade Import/Export Tab in material master of SAP R/3Hi Akhil ..
Sounds like you need to enrol for the SAP Foreign Trade training course!
The tab holds various attributes for determining Foreign Trade data - for example the Customs classification and Country of Origin. Those data are used to determine and/or populate fields in the Foreign Trade data when processing MM and SD documents.
Some, but not all, of the fields in that tab become redundant if GTS is in use.
If you have more specific questions in this area, it might be easier to give better explanations.
Regards,
Dave -
Bypass D-Chain specific status of material master
Hi,
Is there a way ( Copy Routine/ user exit) to bypass D-Chain specific status of material master which prevents creation of Delivery doc w.r.t a PO in STO scenario?
I dont want change the config setting for status to allow delivery creation.
Thanks in Advance
SubhankarHi Kapil,
Threre are some material for which D-Chain status ( MVKE-VMSTA) in the materila master are set in such a way so that deliveries can not be created. We need to bypass this restriction for couple of delivery types. One of them is the delivery type used for intracompany STO.
I am looking for some way out like user exit so that I dont need to change existing config change for those statuses.
Regards,
Subhankar -
Error with Valuation Category in Accounting 1 Tab of Material Master
Dear All,
I have created plant and also activated the "Split Activation" for that plant through SPRO-MM-Valuation & A/c Assignment ---Split valuation.
But when i Extend the material form another plant the "Valuation Category" field in Accounting 1 Tab of Material Master becomes INACTIVE (i.e. it becomes gray). Where as for the plant (from which i am copying the material) the same field is ACTIVE.
Please suggest me what might be the error.
I have checked the setting for both the plants i.e. in which it is working and the other where it is not working. The settings are same.
Please help.
Thanks in advance.Hi Shailendra
If this is for a single material.
I hope u r using MM01 only by giving reference of existing mat., in this case, at this stage only you have to maintain Valuation Category.
Once the material is created, the field will become gray.
This is what I know. If still, there is any way to make this field active, if u come to know, please let me know too. -
Addition of new TAB at Material Master screen
Hi Experts,
I want to add one new tab in between "Descriptions" and "Unit of Measure" tab (under "Additional Data" section in material master). That should hold few language dependent "Brand and Product" data. But, I have no idea is it possible or not.
Please let me know the process if it is possible.
Thank You.Transaction Code - MM01 Create Material &
Exit Name Description
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
No of Exits: 3
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal -
Material specific status in material master
Hi,
We have a material A. in the material master for A, in the basic data ,the "X plant mat status is Z4 which means material discontinued. In the sales org tab for the same material, the "dis chain specific status" is Z1 which also means material under discontinuation.
But the issue is we are able to create and save sales order for material A.
i would like to know what is the issue. the system should not allow to create sales order. Also where are these material specific status configured and where is the control to block the sales order based on these material status.
regdsthe creation of sales order is not controlled with a material status, it is only controlled with customizing of sales status.
The sales status can be defined in IMG > Logistics general > material master > setting for central fields > sales relevant data > define sales status. -
Adding a subscreen in Plant data/stor. 1u0094 tab in Material master
Hi All,
I need to add a subscreen in material master Plant data/stor. 1 tab. Please let me know if its posible.
Warehouse management requires a primary bin and 4 alternative bin locations to be added to the material master. Four custom fields will be added in addition to the standard primary storage bin location field. These fields will be held at the branch/storage location level.
For this I enhanced MARD table with a structure contains 4 fields.
A sub-screen should be added to the Plant data/stor. 1 tab. Alternative Bin Information section should hold the additional four fields.
I want to add a sun screen under General data. This sub screen contains 4 fields for alternative storage bins.
Regards,
Venkat.Hi,
Hi,
u'll have to do the following:
1. copy the std func group MGD1 to ZMGD1....include all ur custom screen and make sure u hav written the PBO and PAI .
Best way would be copy any standard screen and then making any change there like modifying the label.
2. next step is copying the screen sequence ( logistics-material master-configuring the material master)....01 to z1 and then assigninng all ur new program and screen name in this custom screen seq ...
and u can assign this custom screen seq to diff material type....
there is a bit of SPRO involved in this...
and check the BADI BADI_MATERIAL_REF.
<b>REWARD POINTS</b>
rEGARDS -
Costing Issue-Previous Price changes in Accounting 1 tab in Material Master
Hi SAP Experts,
Our Client has an issue with "previous price" field under the "Accounting 1" tab in Mateial master .The issue is that client never did costing to this material XXXXXXwith plant XXXX. But system is showing value in the "previous price" field. We have checked whether previious cost estimate exists. There was no previous cost estimate and still the system updated "previous price" field.
Can anyone let me know in which cases the system updates "Previous Price" field in Material Master ?
Your help is highly appreciated.
Kind Regards,
K.S.KHi
May be this material was created with reference to the same material in other plant or with ref to some other material or may be costing run was deleted from CKR1
br, Ajay M -
Critical Part in Purchasing Tab of Material Master
Hi SAPGURUs,
There is Field in the Material Master of the Purchasing Tab called Crtical Part in the bottom , Can u anyone explain what it is used for ?/and what are the adverse effects it has when we check the critical part field??
Regards
Balajihi,
Critical part indicator denotes for a material which is important.
Eg:In a Diamond tool,Diamond is critical part.
regards
venkadesh -
Logistic handling group tab of material master
Hi,
We are actually grouping materials based on the picking types, these picking types should be visible in the material master plant data/ stor.2 view under the tab Log. handling group field.
Can anybody tell me how do I create these picking types.
Thanks
MikeThe path to create a new logistics handling group is :
Log. Execution >WH management> Planning & Monitoring -->Rgh workload estimate -->calculate workload -->maintain log. load category.
Here you would be able to create new log handling group to populate your log handling field in plant/ stor.2 view.
thanks -
Error in Purchasing tab of Material Master (MM02)
When we select views, Basic Data 1, 2 & Purchasing in MM02, it is
giving an error
"Maintenance status of field MARA-LABOR does not correspond to status
of screen E Message no. M3826 "
One point, which we want to highlight, that this error is coming only
with some user ids only. Authorisation is also ok. what could be the
problem ?. we have checked all possible defaults & user parameters, but
we are not getting any clue. Pl. resolve ...
thanks
amitHi Amit,
MARA-LABOR represents for Laboratory/design office. Therefore you have to check following customization settings in your system;
(a) Goto transaction code OMS9
(b) Enter 10 in Field Sel. Group
(c) Select your Material Type
(d) Make it Optional Entry
Bye,
Muralidhara -
Problem with Addition of z field in Standard Material master LSMW
Hi All,
We have added couple of zfields in material master MARC table also in BMMH1 Structure for lsmw and it is working fine if we go into MM01/MM02 transaction and enter value in Zfields it is getting updated into Marc table.But it is not working when we load through Standard material master lsmw RMDATIND.
We ran RMDATING program also we regenerated the RMDATIND program.Still it is not working.
Anything else need to be done?Any input would be greatful.
Thanks
Raj.Any input on this?
Thanks
Raj. -
Model Selection field in Forecasting tab of Material Master
It is used for automatic model selection in forecasting...
Is there a config that can turn this field on or off?Hi,
You have to maintain the forecast profile with automatic model selection and maintain these for the parts while maintaining the forecasting view material master.
You can create forecast profile from MP80.
Now whenever you perform the forecast then these profile will be checked and forecast will pick up automatic model.
Regards
TAJUDDIN
Maybe you are looking for
-
Adobe Creative Cloud Desktop failed to install, where to get help?
Hi, I have contacted Adobe three times now to get my creative cloud app working again. Everything worked beautifully until last July while updating it crashed and I've never been able to successfully install the app again. The first call I had with t
-
Can I upgrade my hard drive of MBP 2012 without voiding the warranty
I am planning on purchasing a new MBP (2012) 13" with the miminum Hard drive capacity. I wanted to replace the HD with my own SSD. I am comfortable doing it myself, but will it void the Apple warranty?
-
helligkeit verstellt doch es blieb schwarz nur nach einem reboot war alles wie gehabt was war da los und muss ich mir sorgen machen?
-
Hi there, for a university project we have just acquired an ASUS VG278H and a 3D Vision 2 kit. I am using the Apple Dual Link adapter as well. However, when displaying any 3D content the internal 3D emitter doesn't turn on. I also tried using an exte
-
Email is received, but can't be viewed/opened
I've been using my Mac and Mail for years without incident. Yesterday, without provaction, I was still receiving my mail, but could not open the email itself. Keep getting the messaging on the status bar of "Getting message headers from server" and "