Query related to F9 technical info
Hello,
In my SAP system when I go to some transaction
and place my cursor in field and then I do F1and
F9 for technical info, the screen doesnt open up.
the problem is only in test system but in development i can view technical info while pressing F9.
Kindly let me know what setting needs to be done.
Regards
Rachel.
You cannot see technical information of all F1-able cursor locations.
If what you are describing is that you can see the F1 technical information but cannot navigate further into the Object Navigator, then see SAP note 1085326 => You have access to SE80 in DEV, but not in TEST?
If you are referring to the Technical Settings (equivalent to transaction SE13), then try Ctrl + Shift + F9 from within the Object Navigator.
Cheers,
Julius
PS: Please do not cross-post (see [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]). Your other thread will be deleted.
Edited by: Julius Bussche on Aug 6, 2008 8:50 AM
Similar Messages
-
How to add Technical Info to a screen field?
Hi All,
I created a new screen field. The Field is being related to a Dictionary structure. However, when on the Screen i hit F1- and Technical Info, none of the information is filled.
Please advice how to include this information also.
Thanks and regards,
RKHi RK,
Use the event PROCESS ON HELP. this will solveyour problem
create a module for the screen field in PROCESS ON HELP.
<points_removed_by_moderator> <= read "the rules" [here|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]!
Edited by: Julius Bussche on Aug 10, 2008 8:03 PM -
Query relating to the creation of Managed Service Accounts
Hi Folks
I am studying for my 70-411 exam and have a query relating to the creation of Managed Service Accounts.
I have successfully created an MSA account named 'MSATest' on a DC using:
new-adserviceaccount -name msatest –dnshostname home-dc-01 -passthru
and
add-AdcomputerServiceAccount -identity home-ap-01 -serviceaccount msatest -passthru
However the guide that I am using now says that I now need to run: Install-ADServiceAccount on the host computer in the domain to install the MSA in order to make available it available for use by services.
So on my member server (home-ap-01) I have installed the Active Directory Module for powershell and ran:
PS C:\Users\administrator.PCECORP> Install-ADServiceAccount -Identity msatest
Install-ADServiceAccount : Cannot install service account. Error Message: 'An
unspecified error has occurred'.
At line:1 char:1
+ Install-ADServiceAccount -Identity msatest
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : WriteError: (msatest:String) [Install-ADServiceA
ccount], ADException
+ FullyQualifiedErrorId : InstallADServiceAccount:PerformOperation:Install
ServiceAcccountFailure,Microsoft.ActiveDirectory.Management.Commands.Insta
llADServiceAccount
PS C:\Users\administrator.PCECORP>
However this errors, Have I misunderstood the purpose of the Install-ADServiceAccount ? or am I doing something wrong?
Thanks in advance for you help.Try using -RestrictToSingleComputer parameter when creating service account with New-ADServiceAccount.
Gleb.
Hi Gleb
Thank you for your help, it is appreciated. That did the trick.
All the best. -
Query related to multiple attachments in mail adapter
Hi,
I have a query related to multiple attachments in receiver mail adapter.
I have successfully configured mail related scenarios but now I have another requirement in which I have multiple source files in one directory and I want to send one mail for multiple files as mail attachment using receiver mail adapter. Can anybody help me how to achieve multiple attachments in reciever mail adapter.
To clarify the requirement more let us take an example
Ex: I have 5 input files in the source which I pick up using additional files option in the sender file adapter, now I want to send those 5 files into one mail with 5 attachments. Can anybody explain how 5 different payload will be sent as multiple attachments in one mail.
For your information I used, options like "keep attachments" , some parameters in module processesors etcs...but not able to find out as how exactly it will be achieved.......I dont want to use BPM collect pattern for this.....
Need your help on this issue. Please suggest the solution as how it can be achieved using receiver mail adapter.
Thanks & Regards
PrabhatHi,
I resolved the issue on my own. Thanks for your help and support.
Thanks & Regards
Prabhat -
Query related to Email adapter
Hi,
I have query related to receiver Email adapter. I am able to run a scenario for 2 attachments in receiver mail adapter scenario.
My scenario is that I am picking up the multiple files using sender file adapter "additonal fiiles" fucntionality and and post the two files as attachments in receiver email adapter. I am picking up two formats: .xml file and PDF and successfully attached to the receiver email adapter.
My query is is related to Standard module processors sequence.
For 3 files in mail attachments(.xml , pdf & .txt) what should be the module processors sequence in receiver email adapter?
Currently I am using the following module processors sequence
1 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans2
2 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swap
3 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans1
4 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
swap -> swap.keyName -> payload-name
swap> swap.keyValue> file1
trans1> Transform.ContentDescription>file1
trans1> Transform.ContentDisposition>attachment
trans1> Transform.ContentType>application/pdf;name="file1.pdf"
trans2>Transform.ContentDescription>file1
trans2>Transform.ContentDescription>inline
Can any body tell me what should be the sequence of module processors and the associated parameters so that all formats(.xml , pdf & .txt) should go as an attachments in the reciever email adapter.
Thanks & Regards
Prabhatit would be something like this, Try this
1 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swaptxt
2 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans3
3 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swapxml
4 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans2
5 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swappdf
6 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans1
7 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
swapxml -> swap.keyName -> payload-name
swapxml> swap.keyValue> file2
swappdf -> swap.keyName -> payload-name
swappdf> swap.keyValue> file1
trans1> Transform.ContentDescription>file1
trans1> Transform.ContentDisposition>attachment
trans1> Transform.ContentType>application/pdf;name="file1.pdf"
trans2>Transform.ContentDescription>file2
trans2>Transform.ContentDisposition>attachment
trans2> Transform.ContentType>application/xml;name="file2.xml"
trans3> Transform.ContentDescription>file3
trans3> Transform.ContentDisposition>attachment
trans3> Transform.ContentType>application/txt;name="file3.txt"
mail --> mime.contenttype --> multipart/mixed
I have not tried this myself. but it should work -
Hello All,
We are in process of implementing Exchange 2013 in our Organization and had a Query related to GAL.
Below is our Environment description:
01. We have a Single Forest and Single Domain Architecture.
02. We will have separate Active Directory Sites for all 3 Regions across Global.
03. Exchange 2013 will be installed in each region.
04. In APAC region Exchange 2013 Language pack for Japanese will be installed to support Japanese language.
Our Requirement:
================
01. When a Japanese User tries to browse GAL all the display names have to be displayed in Japanese language and when a user who resides other Region (Europe or AMERICAS) tries to browse GAL the Address list has to be displayed in default English Language.
Can someone guide us on how this can be achieved?
Awaiting for all your suggestions.
Thanks in advance.
Thanks & Regards,
Nagaraj N
Nagaraj NHi Nagaraj,
Here are some requirements that I am still not quite sure. Could you please provide more information about it? Such as:
1. Do you mean one user have two display names: one with Japanese language used for users in Japan, one with English language used for English users? Then we filter address lists with language difference. Based on my knowledge, one email address is generally
involved for one display name.
2. If there are both Japanese users and English Language users in the forest, and you just need Japanese users view users whose name is displayed as Japanese language. We can use
Address book policies (ABPs) to segment users into specific groups to provide customized views of your organization’s global address list (GAL).
To show different GAL for different users, we can specify the CustomAttribute1-15 property to divide your organizations. For example, we can set the CustomAttribute15 property for Japanese users to
Japan. Just like:
Set-Mailbox –Identity JapanUser1 –CustomAttribute15 Japan
Then we can create global address list for Japanese that includes all of the recipients that exists in the address lists and room address list:
New-GlobalAddressList -Name "GAL_Japan" -RecipientFilter {(CustomAttribute15 -eq "Japan")}
For detailed steps about how to create and apply the Address Book Policies, please refer to:
http://technet.microsoft.com/en-us/library/jj657455(v=exchg.150).aspx
Hope it helps.
Regards,
Winnie Liang
TechNet Community Support -
Query related to DataGuard Archicture...
Hi All,
I want to implement DataGuard Archicture in my setup, I'hv one query related to different operating system in my setup, I'hv two server one for primary and the other for standby Database with 10g DB R2. In one server having Linux os and the other own has Solaris, so DataGuard will work on different os or both server os should be same? And if I'hv 2 GB then will it be create any prob?
pl. suggest me.A requirement for standby is both databases must be on the same platform and on the same db version, this requirement applies even if you are on a logical or on a physical dataguard database.
You can verify the Step by Step instructions to create a standby database:
Step-byStep Instructions for Creating a Logical Standby Database
Step-by-Step Instructions for Creating a Physical Standby Database
~ Madrid -
Hi Freinds,
This is mamatha i have a query related to withhold tax .what is diff b/w business place and section code.what is importance of section code.
Regards
S Mamatha
Please, search SDNFor India, witholding tax, you need to create the business place and section code with the same id.
Section code is additional field provided by sap for tds related processig, reports etc.
Regards,
SDNer -
Query related to the transfer of the control to the other controller.
Hi all,
I have a query related to the transfer of the control to the other controller.
I have components A and B .From a view of component A I neeed to open a window which belong to component B.Problem is that ,if I use create_window_for_cmp_usage( ) and the open( ) method and after that there is some code,then that code is getting executed before the window is opening.
I want that the control should be back to the these code after the window is poped up and after clossing the window.
Eg
method ONACTIONOPEN_WINDOW .
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->create_window_for_cmp_usage(
interface_view_name = 'ZHELLO_WORLD'
component_usage_name = 'USAGE_HELLO'
title =
close_in_any_case = abap_true
message_display_mode = if_wd_window=>co_msg_display_mode_selected
lo_window->open( ).
data a type i.
data b type i.
a = 2.
b = 3.
a = a + b.
endmethod.
In this case I am calling ONACTIONOPEN_WINDOW method.But before opening the window the a iscalculated here.I want that after popuping the window the calculations should be done .
How will I achieve this.
Thanks in advance.
Edited by: vaibhav nirmal on Nov 25, 2008 6:42 AMHi,
You will have to do your calculation as an event in your new window, or capture the closing of the new window as an event in your currenbt view and do your calculations in the event.
Regards,
Shruthi R -
Query related to User License.
Hi all,
I have some query related to User License.
If we have 250 no of user license( with one developer),
can we use them individually on DEV, QAS & PRD ?
can we use them individually on differrent clients?
what abt users on 000 client. Is they should different license or come under same group.
Regards,
shanContact you SAP Account Manager.
Regards
Juan -
Query related to Internal Table
Hi ,
I have a small query related to internal table , can we dump millions of records to an internal .
The actual requirment is like i need to develop a report in BI side where i have to dump records into an internal table from PSA tables without filtering .
Can we do so ....
or do we have any other option to dump the data to an internal tables .
need some tips on the same .
Thanks ,
VInay.Hello Vinay,
I believe the following extract will give you a brief idea on the size limitations for an internal table.......
Internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. <u><i>The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries.</i></u>
Hope it proved useful
Reward if helpful
Regards
Byju -
Query related to OA framework.
HI all,
I have one query related to OA framework.
Query : I have one business requirement to add/update one choice fields on receivables page and base on user input’s I have to add this choice in sql query and want to display result that is controller .( As of now everything is there only I want to add one more choice on page ).
So I am looking for solution what to do . As I am new in OA framework.
First of all I want to pull out all files and want to check /modify on my user desktop once it will work normal then I will start modify .
So for that what I have to do (I have to pull out all files from server ) . ?
Thanks in advance,
RajRaj,
I have already replied that you will find the details for setup in some of the old threads. Its always better to look into old threads for generic issues. If you have got any specific OAF issue, ppl are always here to help you.
--Shiv -
Query related to RSA3 transaction
Hi Guys ,
I have query related to RSA3 transaction screen in that you can see in
settings
Data Records / Calls = 100
Display Extr. Calls = 10 by default .
can this value can be made to 1000 and 1000 as a default value as soon as screen get displayed without manually changed .
can we creat any variant for this ,will it be possible .
i need some suggestion related to this .
valuble answers will be surly rewarded .
Thanks ,
Vinay .Do any one have any suggestion how to solve the query
-
Query related to filter group on matnr created in ALE distribution model
Hi All,
I have query related to filter group on matnr created in ALE distribution model.
I have created a filter group on matnr in ALE distribution model and put the value E* ( purpose is that all the material number started with E should be triggered in case of any changes in the material).But it is not working.
<b>Can anybody suggest the solution for this i.e how to capture E* value for the material master changes and should trigger idoc using change pointer using BD21.</b>
Thanks & Regards
PrabhatUnfortunately, you cannot filter using wildcards or exclusions. You have to explicitly list each allowed value in its entirety.
In my opinion, the simplest solution would be to copy function MASTERIDOC_CREATE_SMD_MATMAS, modify it to handle your custom filtering and update the message type entry in transaction BD60. -
Query related to .tpz files
Hi,
I am having query related to .tpz files.
I am having XI Development server on AIX. My XI Prd server will be on windows NT .
<b>Can i transport .tpz file from development server to production server as both the servers are on different platforms.</b>
Regards
PrabhatI think it should not be a problem....
One of the reasoning is that SAP standard content for XI also comes as tpz files...
best way to know is to just try it out...
here is the link from sap help on transporting objects..
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Thanks,
Renjith
Maybe you are looking for
-
I have a G5 which I intend to keep. Now that I have updated my iphone 4s to iOS 7.0. I cannot add music to my iphone or upload photos to iphoto. I have the last itunes 10.6.3. which was supported by apple. itunes will not interact with my iphone on a
-
Macbook into 3 Video Monitors?
Hello, i need a way to use my macbook.. to split and be able to show 3 tv monitors... regular old tv screens.. with Video Composite Outputs.. (yellow).... i have found a converter for my laptop so i get one video out port... but i need to make that v
-
Created a trigger but new values are not inserting in the backup table
I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me create or replace trigger
-
Highlighting an editable text sprite
I have a bunch of form type of pages on my stage. User enters text, jumps to a new screen, edits more text. Typically, the cursor will be blinking at the sprite in the lowest channel, which would ebbe my top item on the page. Sometimes, I may have fo
-
My iphone 4 is disabled and i forgot the apple id that i used to setup the iphone with
I have an iphone 4 from verizon. Ive had for little over a year now. i put a password on it and i forgot it and at i first i didnt want to reset my iphone because nothing was backed up but then i decided if i had to reset my iphone then i guess that