Query related to workflows mail message text

Hi,
My problem is related to text chosen for Error mail unknown. An Error mail is fired in the workflow, now the text for E-Mail in English is coming correctly, But for FR language it is not seen properly.
Now My query is where this mail text is maintained in Workflows, so that it can be rectified for other language as well.
I have not found any text in notification and In task description.
The text layout of some WF error messages, if the WF is started by a french speaking user.
WF: MAT Plant Sichten anlegen
Le workitem "< WORKITEM.WORKITEMSHORTTEXT N'existe pas" (code <
WORKITEM.WORKITEMID N'existe pas) du type < WORKITEM.WORKITEMTYPE
N'existe pas est dans le statut < WORKITEM.WORKITEMSTATUS N'existe pas.
Lancez une action de correction pour poursuivre le workflow correspondant
(code < WORKITEM.WORKITEMREFERENCE N'existe pas)
If it's an english speaking user, the text is the following
9999999 WF-Form 999999 Plant:9999
The work item "99999 WF-Form 999999 Plant:9999" (ID 9999999999) of type
B has the status ERROR.
Initiate a correction measure so that the respective workflow (ID0009999999) can be continued.
Thanks and Regards,
Manoj

Thanks Kiran,
But in this case there is no task to send mail.
In my case, an activity(Task) step is going into error and one of the things performed by the workflow system for this step is to send an SAP office document.
Let me know if you need some more information to help me out.
Regards,
Manoj

Similar Messages

Cannot accurately edit Mail message text

Since upgrading to Yeosemite I can no longer edit text in Mail. If I position the cursor where I want to edit and type the text inserts anywhere from 2 to 8 characters further into the message? Very odd.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Query related to workflow

hi experts,
can anyone tell me how to use a class in a workflow...without using it in start of events..??
regards
kanika

hi sumit and avinash...
ur links do not solve my query...dey do not provide tha actual solution of my query...
im nt asking...wat r classes and wat r dere uses...
im asking dere way of implementation in workflow,...nt their creation..
regards
kanika

Where did Automator put the text from my mail messages?

Hi,
I just used Automator for the first time to gather a bunch of e-mail addresses, then put them into one text file.
There were two actions I used, Get Specified Mail Messages and Combine Mail Messages.
Automator says Workflow Execution Completed. Great! Now I want to open this text file and print it.
Any ideas where to find the text?
Thanks.
Anneliese

To La La land
You need to add New Text File action from TextEdit Library.
You the specify the file name and location for it.

How to change message text encoding in multiple e-mail messages?

Hello!
I'm newcomer in AppleScript. I have imported a lot of email messages from mbox.
The problem is that some of messages are displayed in correct russian encoding (KOI8-R) but
other messages displayed with incorrect encoding. So i need manually set their encoding
via mail menu to Cyrillic (Windows) to be able to read them. I got about 1000 of those messages.
Is there any possibility to mark those messages in mail and then run AppleScript to change
their encoding automatically?
something like that (that script is not working one):
tell application "Mail"
set selectedMessages to selection
if (count of selectedMessages) is equal to 0 then
display alert "No Messages Selected" message "Select the message you want to get the raw source of before running this script."
else
set message text encoding to "Cyrillic (Windows)"
end if
end tell
Thanks!

I was able to get it to work on all selected emails using this script:
(Note I changed the encoding to "Simplified Chinese (EUC)")
using terms from application "Mail"
tell application "Mail"
set theMessages to selection
tell message viewer 1
repeat with themessage in theMessages
set selected messages to {themessage}
activate application "Mail"
tell application "System Events" to ¬
tell menu item "Simplified Chinese (EUC)" of menu 1 of ¬
menu item "Text Encoding" of menu 1 of ¬
menu bar item "Message" of menu bar 1 of ¬
application process "Mail" to if (exists) then click
end repeat
end tell
end tell
end using terms from

In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

So, I have found the article
http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
However, there is a basic problem that I run into before I get started.
I am logged into the system as a regular user (ie not a farm admin, etc.).
I do, however, have full control on the site on which I am working.
I create a custom list.
I create a simple one step approval - sharepoint 2010 out of the box workflow.
I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
All I see is "open", "open in a new tab" and "Pin".
I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
So, I click on Lists and Libraries, then on the name of my custom list.
When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
Is there someone who has some advice on how to find this copy and modify option? Or perhaps a web site, web forum, article series, or book covering the topic?
Thank you!

Hi lwvirden,
According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
Copy and Modify button.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How can I disable e-mail and text messages when I'm close to or over my data quota ?

How can I disable e-mail and text messages when I'm close to or over my data quota ?
Is this possible? I don't see any options?
All I see is this:
Receive confirmations of many account transactions via Email and/or free Text Alerts delivered right to your cell phone. You can receive these confirmations for
   transactions done online, over the phone or from your handset. Account management Text Alerts do not count against any Messaging allowances.
      Your bill is ready for review.
     Payment Confirmations: Your payment has been received    Your credit/adjustment     has been applied.1
     Account Activity Confirmations     Plan changes     Feature changes1

What phone?
You would need to disable data on the phone itself. You wouldn't do it online on your account.
Note also that text messages do not count toward your data allowance.

Query related to multiple attachments in mail adapter

Hi,
I have a query related to multiple attachments in receiver mail adapter.
I have successfully configured mail related scenarios but now I have another requirement in which I have multiple source files in one directory and I want to send one mail for multiple files as mail attachment using receiver mail adapter. Can anybody help me how to achieve multiple attachments in reciever mail adapter.
To clarify the requirement more let us take an example
Ex: I have 5 input files in the source which I pick up using additional files option in the sender file adapter, now I want to send those 5 files into one mail with 5 attachments. Can anybody explain how 5 different payload will be sent as multiple attachments in one mail.
For your information I used, options like "keep attachments" , some parameters in module processesors etcs...but not able to find out as how exactly it will be achieved.......I dont want to use BPM collect pattern for this.....
Need your help on this issue. Please suggest the solution as how it can be achieved using receiver mail adapter.
Thanks & Regards
Prabhat

Hi,
I resolved the issue on my own. Thanks for your help and support.
Thanks & Regards
Prabhat

I accidently cut a piece of text out of a mail message

I accidently cut a piece of text out of a mail message the copied a different piece of text with out thinking is thee any way to get the first piece of cut text back?

Welcome to Apple Discussions!
Mail supports multiple undos. Keep on undoing from the Edit menu! Not sure how far back that undo buffer is, but keep on trying. If it doesn't work, test it so you know for the future.

Clicking on Mail message causes all text in window to vanish

I've searched for anyone reporting a similar issue and couldn't find anything, so my apologies if this has been reported elsewhere.
I'm having an intermittent issue where clicking on, for example, an attachment in a Mail message causes the contents of the message window to disappear (not the window, just its contents). This happens whether the message is within a viewer window, or has been opened in a new window by double-clicking from the message list. Clicking anywhere in the message (not just on attachments) causes this behavior. Once it starts, quitting and restarting Mail is insufficient to stop this behavior - restart is required.
Has anyone else seen this behavior?

If I’ve understood it correctly, all you have to do is find a way to select the message and delete it without causing Mail to display its contents. Proceed as follows:
1. Launch Mail holding the Shift key down until the main window appears. This tells Mail to not select any mailboxes or load any messages upon start up.
2. Go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled -- having this setting enabled is a really bad idea for spam-related security reasons anyway.
If you have the preview pane visible, Mail may still crash again as soon as you select the troublesome message. There are at least three ways to select the message so that you can delete it without Mail displaying the message contents:
3a. You can hide the preview pane by dragging the horizontal separator bar between the message list and the preview pane to the bottom of the window, or just double-click within the separator bar, so that the preview pane disappears and only the message list is visible. This would prevent Mail from trying to load the message when it is selected in the message list. To make the preview pane visible again, drag the horizontal separator bar up from the bottom of the window, or just double-click on it again.
3b. If you select the message with the mouse, the message is displayed in the preview pane when the mouse button is released, not when it’s pressed. This allows you to drag the message to the Trash or to any other mailbox without Mail trying to display its contents.
3c. Ctrl-clicking on a message causes a contextual menu to appear, from which you can usually (but not always, don’t ask me why) choose Delete or Move To, without the contents of the message being displayed in the preview pane.

How can I attach a jpg file in a mail message as the file icon, not as an opened image in the text?

How can I attach a jpg file in a mail message as the file icon, not as an opened image in the text?

what's wrong with this picture

Group Contact Setup for Text & E-mail Messaging

It would appear that compared to my previous BB Bold my new Z10 is unable to create group contacts for both Text and E-Mail messaging. Will this be addressed by RIM or is there an App available?

You should be abel to go to the O2 website and select to have the O2 connection settings sent to your phone via sms.
Try this web page.
http://getsettings.o2.co.uk/ServeSettingsWebApp/
N97 (Product Code: 0585262 (Voda UK)) FW 12.0.026
95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
If a post by a user has been helpful, please click on the Kudos! button.

Inbound workflow mailer tags don't recognize Undeliverable system messages

We have an inbound Workflow mailer that was not set up initially to view or filter any custom tags. There are 2 "Undeliverable" messages, which seem to be looping in our inbox.
The undeliverable message comes in and gets filed to the "PROCESS" folder. It then seems to be triggering a invalid response template email to be sent, which then attempts to send another email to the invalid address, and gets received again starting the process over again. I have created a new tag on the workflow mailer Advanced setup with "Undeliverable" as the pattern, and "Unavailable" as the action. I have also tried the "Ignore" as the action but neither change sent the message to the Discard folder.
Oracle System: EBR R12
Email: Microsoft Exchange

We have an inbound Workflow mailer that was not set up initially to view or filter any custom tags. There are 2 "Undeliverable" messages, which seem to be looping in our inbox.What is the difference between these 2 messages and the other ones?
The undeliverable message comes in and gets filed to the "PROCESS" folder. It then seems to be triggering a invalid response template email to be sent, which then attempts to send another email to the invalid address, and gets received again starting the process over again. I have created a new tag on the workflow mailer Advanced setup with "Undeliverable" as the pattern, and "Unavailable" as the action. I have also tried the "Ignore" as the action but neither change sent the message to the Discard folder.Did you bounce the Workflow mailer and listener and see if this helps? -- Workflow Java Mailer & Notifications FAQ [ID 562551.1]
Can you find any errors in the Workflow log file?
Oracle System: EBR R12
Email: Microsoft ExchangeWhat R12 release you are on?
Thanks,
Hussein

Saving Mail messages as text or rtf to a server makes them invisible

If I save an email message as text or rtf to a LaCie NAS server, the resulting file is tagged as invisible. If I save it to the Mac's hard disk it is not. It's relatively easy to untag the files, but I need to save dozens on some days and it's laborious. Any ideas … ?

It gets worse. I have just saved an incoming mail message with three attached photos. It said it was saving the images (hooray) and it created an RTFD file (folder). However, when I opened the saved document there were no images! Very very odd...
Some readers may think that I must be getting it all wrong and this is just pilot error. I can here reassure them that is not the case; I am a technically competent Apple user of some 25 years' experience. I am not a code monkey though; I can strip down and reassemble a thirty year old naturally aspirated performance engine but I would not be able to do anything under the hood which involved chips and computers!
It is a difficult one to pin down but I will be very interested to know if any other Lion upgraders are experiencing similar problems, however ill-defined.
Drew

HT2500 how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise.

how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise. thank you.

Attach it to the message. An attachment is an attachment -- if it is displayed or not by the recipient's e-mail client is not under your control.
You can zip it (compress it) before sending it; if it's text, you should zip it anyway; if it's JPEG, zipping will not reduce the size (in fact, it's even possible it may increase it slightly), but most e-mail clients do not display what's inside a zip archive.

Query related to workflows mail message text

Similar Messages

Maybe you are looking for