Query result filter another query

Hello Guru
I want to create a query A (List of PM_ORDER) filter by status.
and another query B based on the list of query A.
Query A became "filter" of query B.
How handle this ?
Message was edited by:
laurent plichta

Hi Laurent,
You can attempt this using replacememtn path variable for the char you need to filter by. This is called Result Set Query. See here for details:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/78a03c1178ad2ce10000000a114084/content.htm
Hope this helps...

Similar Messages

How to use one query results in another query

hi,
in help.sap I have founded that using variable type replacement path I can use one query results in another query. It is wrote there that I have to choose query name results I want to get in variable definition but I do not know where.
How I can do this?
Result I want to get is:
In one query I have material prices in another material quantities. I want to calculate inventory value (price * quantity). Moreover prices are on plant level, quantities on storage type level. Plant is atribute of storage type.
Can I do this?
Regards,
Andrzej

Hi Andrzej,
please check out this thread: Set parameters values depending on other parameters
I had a discussion about query results as input for another query in there.
For creating a workbook, just click on the save button after you ran your query in the bex.
Siggi
Message was edited by: Siegfried Szameitat

Combine query, result from another query on SAP BI query Universe?

Hello all,
We are using SAP BI queries as datasource for our universes. Is the combined query option disabled for webi reports written on such universes?
result from another query - is this option active for such webi reports? I see both these options greyed out so wanted to check.
One last thing what is really difference between subquery and results from another query? subquery - you can use filters from that one data provider only right? or can you use a different data provider/report in sub query?
Thanks a lot for all the replies.

Hi,
in BO 3.1 Combined query and result from another query options are not available in webi report on OLAP Universes (SAP BW Universe.)
Thanks,
Amit

Can we use Result from another query in Webi using Bex uery universe?

Hi,
Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
Has anyone run into the same issue and if this is possible and what should be the solution?
Thanks in advance!
Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

In that situation:
Create two queries : Oracle and BW query.
@ Report:
As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
Hope it helps you.
Thank You!!

Query on results from another query

Post Author: Duncan1980
CA Forum: Crystal Reports
Is it possible to query on the results from another query. I have a query that produces a list of document numbers. I want to use the output from that query as the filter criteria in a another query in the same Universe.
The output from the first query can be as much as 2000, so it would be very time consuming to cut and paste these into a filter.
Both reports are built, but can not figure out how to link the first report output to the filtering criteria on the second report. I
I am using business objects XI release 2 web intelligence 11.5.3.417 enterprise.

Hi Vivek,
It was not directly solved but I applied alternate logic to over come the issue.
Here's what I did to overcome:
I used a sub query in place of the whole result from another query.
For Ex:
Dim1 inlist result from another query1
I made it as
Dim1 inlist (Dim0)
where Conditions.
Here Dim0 is the object which we use for Result from another query and Conditions will be the necessary filter conditions to arrive proper Dim0. Make sure proper context is formed for the sub query.
Even though it resolved my problem, It introduces an new issue. It causes increase in query run time when huge set of data is returned from sub query.
Please let me know if i haven't explained clearly.
Hi Aris_BO,
Sorry for not responding earlier. The logic would probably make more queries null & not null. Thats why I was not advised to use it.
Thanks
LN

Issue with Results from Another Query (Error on Null value)

Hi All,
We have a WebI report using "Result from Another Query" option of BO XI R3.1. The report was running fine till recently the dimension object using result from another query had a null value. Report suddenly throwed error as the query filters are invalid.
Is there a way to make this filter optional if no data/null value is there ? Because we need those null values in report as well.
Thank you for your time.
Thanks & Regards
LN

Hi Vivek,
It was not directly solved but I applied alternate logic to over come the issue.
Here's what I did to overcome:
I used a sub query in place of the whole result from another query.
For Ex:
Dim1 inlist result from another query1
I made it as
Dim1 inlist (Dim0)
where Conditions.
Here Dim0 is the object which we use for Result from another query and Conditions will be the necessary filter conditions to arrive proper Dim0. Make sure proper context is formed for the sub query.
Even though it resolved my problem, It introduces an new issue. It causes increase in query run time when huge set of data is returned from sub query.
Please let me know if i haven't explained clearly.
Hi Aris_BO,
Sorry for not responding earlier. The logic would probably make more queries null & not null. Thats why I was not advised to use it.
Thanks
LN

Search criterias in one page, the query results in another page?

Hi, can I put search criterias in one page, and get query results in another page?
Need help
Thanks in advance
karman

If you meant a situation like: Page 1 has some items and page 2 has a report which refers page 1 itemsThen your report _query would fetch proper results provided the page 1 item values are available in the session_.
That is, after submitting their values(using page submit,dynamic action,ajax etx) to session state , their values would be available in any page (anywhere in that session ) , until the page cache for the item page(page 1) is cleared.

Results from another Query - not available

HI,
My environment is Business Objects XI 3.1 SP2 Edge series , i have below quereis with web Intelligence Reports
1. not available the functions/options Results from another Query(Any) or Results from another Query(ALL) at Query Level.
2. not getting list of Values for pronpt until i refresh values for prompt?
Please suggest me is there any fix packs available for the same to availle that functionality.
Best Regards,
Reddeppa K

not getting list of Values for pronpt until i refresh values for prompt?
There is option called "Automatic refresh before use" for the object properties available in the universe designer.
Please check the box for the object you are using for populating the list of values and export the universe.
not available the functions/options Results from another Query(Any) or Results from another Query(ALL) at Query Level.
There is a limitation for the query on query functionality that the both the queries can-not be from the OLAP universe.
I guess the query which needs to be filtered should be built on universe from the relational data base.
Regards,
Rohit

Unicode String Issue while Using Results from Another Query

Hi All,
In a webi report i have 2 queries say Sales Out and Investment. I need to have only those chains which are in Investement in Sales Out.
So in Sales Out query i am using the option Results from another Query. The Chain values are in Unicode format.
Though in universe i have Set Parameter Unicode_String ='Yes', this does not get applied when using option Results from another Query.
Is there any solution to resolve this problem.
Thanks
Madhura

leonhardtk wrote:
I need to take values from the column of one table that meets certain critera, and create inserts into another table that includes this data.
For example...
{code}
select emp_last_name from emp where emp_first_name like 'B%';
Duncan
Fitzgerald
Johnson
Smith
{code}
I then want to insert these values into another table:
{code}
insert into My_table values (
sequence.nextval,99,99,[last_name]);
{code}
In the example above, I need it to insert a new row into My_table for where the "last_name" is each of the names from the select statement above (Duncan, Fitzgerald,Johnson,Smith).
Based on other similar forum questions it looks like I should be doing something like:
{code}
INSERT INTO MY_TABLE
(SELECT sequence.nextval,
                99,
                99,
               (select EMP_LAST_NAME
                FROM EMP
                WHERE EMP_FIRST_NAME LIKE 'B%')
{code}
But this (obviously) doesn't work!
Appreciate any assistance on this!
KSL.
Hi,
Created this test data
create table plch_test (name varchar2(50));
insert into plch_test values('AKSHAY');
insert into plch_test values('RAHUL');
insert into plch_test values('APARNA');
output
1    AKSHAY
2    RAHUL
3    APARNA
created another destnation table(in your case "my table")
create table plch_test_1 (id number,name varchar2(50));
created another sequence to generate employee ids
create sequence test_seq;
Now populated the desination table
insert into plch_test_1(select test_seq.nextval,name from plch_test);
verify the destination table
select * from plch_test_1
1    AKSHAY
2    RAHUL
3    APARNA
Hope this helps
Regards,
Achyut Kotekal

Filter by "Result from another query" option not available in Webi

Hi all
I am trying to filter one query by zipcode based on the results of a previously run query in the same report. However this option is not available on the drop down when I drag zipcode into the filter pane. I am restricted to the options: Constant, Value(s) from a list, Prompt or Object.
I have "use subqueries enabled" within my universe and the data is held in an RMDBS (i.e. it is not an OLAP universe) so I expected this functionallity to be available.
I am using XI 3.2 and Java version 1.6.0.15, i.e. up to date.
Any help would be greatly appreciated.
Thanks
Sharon

Sharon,
Here is one method to achieve your objective, however, it involves the use of Merge Dimensions. Here goes:
In the Edit Query mode, build two queries, where the first query has all the objects, to include Zip code, and the second query has the zip code, filtered for the one at hand. (you probably have done this portion already)
In the Edit Report mode, think of your data set as Query1 (all the data objects you want) and Query2 (zip code and filtered on that zip code) and thus you'll have Query1.zip and Query2.zip. If you build a grid containing all the data you want from Query1, then simply add Query2.zip to that grid, voila, the grid will be "filtered" due to the "merge" that occurs under the wire. The 'problem' here is that you have two columns that are repetitive and there is no inherent way to "hide" a column in WebI other than masking the column with white on white (font/borders) or some folks sometimes apply Alterters to achieve the same.
Best of luck in moving forward with your task.
Thanks,
John

How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

Use the results of an SQL query to create another query

I am working on a bidding/allocation system using C# and MySQL, and I am currently having difficulty implementing the “post-allocation” mechanics of the system. Let me explain how it works, before introducing the code:
When the bids are made on the system, they all have the position 0, so the first thing the system does is order them according to priority.
(bid table)
In this case, 5 bidders are interested in what is in plot 15, but we have not assigned them a position yet.
(bid table)
The system then organises the bids according to the order in which they are going to processed.
The bids are then allocated, but unfortunately there are only 3 spaces in plot 15 that can be allocated. As a result, we use the priority listing to determine which bidder gets what.
(booking table)
At this stage, I can say that I am stuck, there are two things that I want to do, both of which involve reusing the results of the query at step 2.
(bid table)
The bidders that have their job allocated should see: their bid.status updated
from Queued to Allocated,
the bid.position should
be set to 0,
and their job_id should
be set to the booking they have been allocated (i.e. booking.id).
The bidders that have not had their jobs allocated should see: their bid.status remain
as Queued, and their bid.position should
be set to 0 in
preparation for the method to run again
The difficulty I am having is in stage 3, how do I determine which jobs have been allocated and which ones have not, and then run the necessary SQL queries in order to make the updates?
My code so far is as follows:
// STEP 1a - SELECT BIDS
string query =
"SELECT t1.operator_id, t1.datetime, t1.plot_id, t1.position, t2.market_access FROM bid t1 " +
"JOIN operator t2 ON t1.operator_id = t2.id WHERE t1.status='Queued' AND t1.postcode=@postcode " +
"ORDER BY t2.market_access ASC, t1.datetime ASC";
var bidList = new List<BidList>();
var cmd = new MySqlCommand(query, _connection);
cmd.Parameters.AddWithValue(("@postcode"), _plot);
MySqlDataReader dataReader = cmd.ExecuteReader();
while (dataReader.Read())
var item = new BidList
OperatorId = dataReader["operator_id"] + "",
PlotId = dataReader["plot_id"] + "",
Position = dataReader["position"] + "",
Datetime = dataReader["datetime"] + "",
MarketAccess = dataReader["market_access"] + "",
bidList.Add(item);
dataReader.Close();
// STEP 1b - SET PRIORITIES
for (var i = 0; i < bidList.Count; i++)
var position = i + 1;
bidList[i].Position = position.ToString();
query = "UPDATE bid SET position=@position WHERE status='Queued' AND postcode=@postcode AND operator_id=@operator_id;";
cmd = new MySqlCommand(query, _connection);
cmd.Parameters.AddWithValue(("@position"), position);
cmd.Parameters.AddWithValue(("@postcode"), _plot);
cmd.Parameters.AddWithValue(("@operator_id"), bidList[i].OperatorId);
cmd.ExecuteNonQuery();
dataReader.Close();
// STEP 2 - ALLOCATE JOBS ACCORDING TO PRIORITY
foreach (var t in bidList)
query = "SELECT operator_id, plot_id, status FROM booking " +
"WHERE status='open' AND postcode=@postcode AND operator_id='0'" +
"ORDER BY datetime ASC;" +
"UPDATE booking SET operator_id=@operator_id, status='Allocated' " +
"WHERE (plot_id=@plot_id AND operator_id='0' AND status='Open') LIMIT 1;";
cmd = new MySqlCommand(query, _connection);
cmd.Parameters.AddWithValue(("@operator_id"), t.OperatorId);
cmd.Parameters.AddWithValue(("@postcode"), _plot);
cmd.Parameters.AddWithValue(("@plot_id"), t.PlotId);
cmd.ExecuteNonQuery();
dataReader.Close();
// STEP 3
CloseConnection();

I can't tell. When modifying row(s) you have to be able to uniquely be able to identify the row(s) in the database you want to modify. That is why I recommended the other day to use DataAdapter instead of the DataReader. You can with the
reader, but you need to unique identify the rows.
I can't tell from the limited amount of data you posted if in table 2 that there is only one row with the same operator id and plot id. It looks like in table 2 the 'id' number is unique. When working with a database with multiple tables you
need to be able to link tables together with primary keys (columns wit unique values). If the database isn't designed properly then it is impossible to do some operations. So you always have to make sure you design a database properly.
jdweng
When you say table 2 are you referring to the bid or booking table?
Here is the table structure for the bid table
Here is the table structure for the booking table
Hope it helps makes things clearer!

Saving values of a query to do another query

Hello:
I have two selectOneChoice in a page. When you select in the first SelectOneChoice, the second one shows the values obtained by a query. This works perfectly.
Now with the second value of the SelectOneChoice I have to do another query to get values for another query. I would like to save this values in a variable to use them in the next query and create a table with the resutl of the query.
Some ideas? I haven´t be able to get this
I have get to execute the query. In the PageDef I have created a variable (codEnf) and a iterator (findCodEnfByIdIter) in the executables. In the bindings I have created an methodAction(findCodEnfById) and a List (findCodEnfById1). In the console i see that the query is executing correctly. If I put a new component referencing to this, all is correct. But.... How to save the result in the variable codEnf??
I have put a OutputText in the page with value #{bindings.codEnf} and it´s empty...
Why?
Message was edited by:
ALF

Help please!!!!!!!!

Use Query Results in Subsequent Query

Is it possible to use a value returned in query number one in
query number two as the "where"? For example, Box Number is
returned in query number one, and I want to query again for
additional information based upon the box number.

Lucky Kitty wrote:
> Is it possible to use a value returned in query number
one in query number two
> as the "where"? For example, Box Number is returned in
query number one, and
> I want to query again for additional information based
upon the box number.
>
Yeah, it is just a variable and can be used as anyplace
another variable
can be used.
But when one is doing this kind of thing at least 8 out of 10
times, it
can be done with a single query with a proper join.

How to read query results in a query

Is there any way the query results can be read from a table. What is the name of the table which intermedia stores the result by default after a select statement.
null

You need to:
1- create a text index on your table
2- use the contains clause in the SQL statement (e.g. select * from <your_table> where contains() ...)

Query result filter another query

Similar Messages

Maybe you are looking for